Neo 2 PLatinum chaps, what drivers are you using?

Currently I'm using the 6.66 nForce 4 drivers with the beta GART driver from the 6.37 set.
Seems to be all working still :D

5.10 here.
too bad nvidia isn't upgrading the drivers for non-nforce4 boards

Similar Messages

What PSU are you using?

K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)

Quote
Mr Woo- I think the question we should all be asking is who is using a high end PSU (30ish 12v amps) and also getting stability problems.
sorry mr woo This thread has been set up by k3nt to acess a specific prob he's having.
Quote
what PSU are you using?
K8N Neo Platinum users (with stable systems!): what power supply are you using?
Please post its specs, namely the 12V rail.
Thanks!
EDIT: Users with a 6800 ESPECIALLY please post! =)
and
Quote
I might be having to replace my Antec Truepower 480. Apparently its 22A on 12V rail is questionable considering my system? See my specs below in sig.
I feel if the thread was as u suggested would just be a mirror of this one
Worst PSU that works on an A64-system?

What browser are you using with OS 9.x?

Would you all please state which internet browser you are using with OS 9.x and the strengths/weaknesses you are experiencing with it?
I switch back and forth between Mozilla and Internet Explorer but fewer and fewer websites work properly with them. If there is a better browser than those two I would add it to my old Wallstreet running 0S 9.1.
Again, what browser are you using with OS 9.x and what are its good/bad points?
Thanks!
Message was edited by: Paul Stamser

(Almost forgot
I have an iCab filter set up for Yahoo on my OS 9.2.1 iMac.
For the URL string I use (asterisk)yahoo(asterisk)
For the Scripts filter I use the Netscape identity and have all versions checked except "JScript", and everything is checked in the "Allow" section.
For the Network filter I use the Firefox identity and have the HTTP "referer" set to "Always".
I don't use Yahoo Mail much on that machine, but those settings allow me to use the Address book to select addresses and send messages with attachments. (I'm not sure about viewing attachments, though, and I'm almost positive that address auto-complete doesn't work.)
Cheers,
K.S.
(I use iCab 3.0.5)
Message was edited by: K.S.

What Camera are you using?

Hi,
What camera are you using for you shot?Let share about the Semi Pro cam together: Fix Lens with manual Focus and Zoom,Affortable Price...

Well, before I got my Digital Rebel XT I dreamed of the Powershot S2 IS. Then the S3 came out...but I was hookoed on my Rebel XT. I hear the S5 is a monster...
Now, my 20D is probably more prosumer. I wouldn't call it a pro camera, although it is legendary for it's use on the sports areana and weddings by pros. For my money, any camera with a pop-up flash and automatic modes is not a pro camera. Having said that, I hope no one starts throwing eggs and tomatoes!
-Scott

What launcher are you using?

What launcher are you using with your Z2?
I'm on Nova Launcher Prime with HERAcon theme and icons.

Apex Launcher

What application are you using for student collaboration?

The only part that is missing from iTunes University is real time student collaboration. What application are you using to bridge the gap? Thanks, Ed

Yeah, I'm not sure I know what you mean either.
Q: If you're asking which server-side code to use on Windows IIs Servers?
A: ASP or ASP.net and MSSql. Since Microsoft built these languages, you would get the best support from MS Expression.
If you're asking for software that helps you write code, you'll need to be more specific about which code you want to write and for what purpose.
Nancy O.

What Drivers are you us

I am using a Xtreme gamer and 2.5.006 drivers

jerelot wrote:
I read somewhere on HP's site that windows 7 drivers for this TX2 - 1027CA won't be available until October 2009. Still I am using it now, and the main system is running fine. There is an issue around the fingerprint reader, and possibly the webcam for me at this stage. Until HP delivers updated drivers, I wondered if there might be beta versions of drivers for the TX2 I might try. I'm willing to keep using windows 7, but I'd like to try to install updated drivers asap. That's possibly two months away, and one month into the OS availability to MSDN subscribers (many businesses and developers). I'm guessing there are some other people reading this list who have found what is and isn't possible on the TX2 today under 7. Would you mind giving us a brief run down on what drivers are working or not working? Fingerprint reader and webcam are of high interest for starters. My goal is to get working what can be working.

What armband are you using?

Looking for an armband to use that can accomodate receiver. Just wondering what armbands people were using.
I don't really like the nike armband.

Xtreme mac Sport Wrap http://www.xtrememac.com/cases/nano/sportwrap.php
It's comfortable on either wrist or arm & has a screen. (It has two straps in different sizes.)
I cut a small slit with a box cutter in bottom of the sport case to fit Nike+ sensor and put a hole for the earplug cord. The neoprene has not stretched or torn so it holds the Nano firmily in place (despite the slit--which looks like it was meant to be there--not jagged or rough).
I wear this on my wrist so that I can see the dial. No matter how much I perspire, the Nano does not get wet because it is not flat against my wrist. You couldn't pay me to use a screenless arm/wristband.

Who has no problem with Audigy2Zs Platinum Card what configuration are you usi

Since upgrading to Audigy2Zs Platinum,I've had a host of problem not experience on my previous Audigy's which were simply set-it and forget-it. SO, I'm interested in YOUR configurations, speakers, creative apps, and dvd player since I mostly use my rig to view DVD's. my config is;
PowerDvD 6 Deluxe with all audio paks, set to Spdif
THX console: 5., analog, 96 Khz, speaker above monitor, Volume Balance Adj ALL 6.0"
EAX Console: preset Garage.
Surround Mixer: Volume, Bass, Treble 75%(-7.5db). Wave, Speakers Volume controls 00%.
Speakers Klipsch Promedia 5. THX.
Rig: ALienware 2002 Area-5, P4 2.5 with Intel MBO.
HOw 'bout it!
regards,
AL

ASUS P4P800 Deluxe (Intel SATA RAID controller, VIA IDE RAID controller)
Intel 3 GHz P4 HT (Socket 478)
SB Audigy 2 ZS Platinum
GB Corsair DDR 3200 RAM
ATI Radeon x800 XT All-In-Wonder 256MB AGP 8x
Sony 8x DVD Recorder (all formats up to +DL)
Sony 52x32x52 CD-RW/6x DVD-ROM Dri've
(2) 20 GB Maxtor SATA HDD (RAID 0)
(2) 80 GB Maxtor ATA HDD (2MB Cache, RAID 0)
80 GB Maxtor ATA HDD (Standard config on VIA controller)
Antec Soho Server tower running an Antec 480W NEOPower power supply
After my last reconfig, I tried to load the drivers for the sound card. I kept getting a problem with the computer restarting in mid-install. After finishing the install in Safe Mode, I went to load a midi file and my computer restarted without warning. After trying to upgrade to the new beta drivers, my computer restarted once more (stopping at the soundfont driver). Apparently, the SoundFont drivers no longer work in my setup. I'm currently using the MS GS Wavetable Synth for MIDI.

Is your iOS6 wifi ok? What router are you using?

After trying every possible solution proposed to resolve my wifi connection problems after upgrading to iOS6'the only solution left is to purchase another router. Today an Apple tech support rep told me wifi connection was hardware related only and had nothing to do with iOS6. I don't believe her but it is true that some are claiming they have no wifi connection problems at all after updating to iOS6.
If that is the case please tell me what brand and model router you are using so I can purchase a new one that is compatible with iOS6.
Thanks!

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

What LMS are you using with UPK?

I have been using UPK for about 2 years. I have been tasked with finding an LMS for our organization. If you are using an LMS, please let me know what you are using, what you like and don't like about it.

Hi
We are using Janison - LMS Vs 7.01
Its a bit clunky and visually not what you call cutting edge.
We have over 2.5k users in 13 different institutes who are all tested on the LMS and we use SCORM 1.2 to score a 80% pass.
No pass - no access.
Wouldnt recommend Janison but it may have been our initial setup of the file structure that is causing a lot of our problems and lack or reporting options.
Cheers
J.

What camcorder are you using with FCE that's compatible

I'd like to hear from folks so other folks know what's compatible and what is not. I know Apple has a list but it's outdated. old, and not comprehensive. By you stating what make & model your camcorder is and if it works with FCE will help a lot of folks.

Hi Sheila.
The Apple list causes more trouble than it is worth.
There are possibly thousands of cameras out there but testing is so time-consuming that Apple has only tested a handful - probably all those on the list!
I think you will find that (almost) every mini-DV camera in the world, equipped with FireWire, will work OK in FCE.
You probably stand a greater chance of being struck by lightning than of buying a new camera that will not work.
Having said that, some Canon owners have experienced problems - which have usually been curable.
If you buy from a local dealer you might be able to come to an agreement that you can return the camera in the highly unlikely case that it is not compatible with FCE.
I believe some dealers will let you borrow cameras for short evaluation periods. (I don't expect the large "box-shifters" will do this).
Ian.

What headphones are you using for your play

Im just curious to find what headphones people are using for there mp3 players, i am using some JVC gummy's there not expenci've at about ?6.99 and they come in about 5 colours which is nice if you have a player like a zen micro, n200 etc...... If you want to know where to get them i got them from dixons, there pretty good Message Edited by sababas on 08-24-2005 0:47 PM

I use Koss SparkPlugs on my N200. Cost about ?5, very comfortable and good sound quality and volume.
PB

What CPU are you using on your board?

Hi there,
I like to know what CPU you are using at this time.....
Just to see what AMD's are used....
Bas.

Quote
Originally posted by hardwareman
hi there bas,,
I voted for my first AMD XP 2000+ )
and am using the msi KT3Ultra-ARU 8)
greatings!!
Hey man ..
Im runing a KT3Ultra-ARU also .. and I just picked up an AMD XP 2000+ at a Comp show .. and Im haveing a real hard time getting it to run on my mobo ..
I'm haveing trubble at boot , if I get past that I loose my video ...and if I make it past that I get windows to run for only about 20 seconds ..
can anyone offer any advise ..?

Poll: How many users on your apps and what hardware are you using?

I am curious about the collective experience and performance of others APEX applications and how much "horsepower" your hardware has.
I have a need to support 20-30 users and am using a Windows XP machine with 1.99 Gig of RAM and a 2.8 GHz Pentium 4 CPU.
Any thoughts on this?

For my personal use, I'm renting a Celeron 2.4ghz with 1Gig RAM running CentOS, Oracle XE and Apex 3.2 at a data center 1200 miles away. Seems to work fine. I find the biggest issue is network bandwidth. I originally had a 10Mb link to the datacenter's backbone, now have a 100Mbit. The difference was night and day.
For work (speaking only of our Apex servers), we've got:
One Dell 2way P4 with 4G RAM and 10,000 RPM drives.
It runs 2 10G instances and several Apex apps and it also runs Enterprise Manager Grid Control for 40+ databases. No issues.
Multiple prod/dev/test servers.
All are VIRTUAL running on VMWare ESX3.5. Each database VM has 2 gig of RAM and 2 "CPUs" running 11g/Apex3.2 on Oracle Linux. They all work fine.
I find that a poorly written app can crush just about any hardware you can throw at it. Luckily we don't have any of those ;).
I suspect that your hardware would be fine, particularly if running Linux. I cannot speak to Oracle/Apex on XP. I suspect you might be disappointed, mostly because it is tuned for interactive use rather than background applications (services). Not trying to be a Windows vs Linux troll here, just saying that if you are running a workstation with Oracle/Apex and you on it and expect to support 20-30 other people, you are all likely to be disappointed. Apex/Oracle should be on dedicated server hardware with a server OS.
You also aren't giving us much info on your hardware; 7200RPM IDE/SATA drives aren't going to be as fast as 15KRPM SCSI or SAS, etc.
It wouldn't surprise me if your well written application was able to support 20-30 users with the hardware you are describing (though I won't vouch for the OS).
Google for "apex.oracle.com" and "poweredge 1950" that will take you to this link:
http://joelkallman.blogspot.com/2009/06/who-says-application-express-cant-scale.html
The whole thing apparently serves up 6 million page hits a week with a 1.5Gig SGA. That's a lot of work on a pretty small box.

Neo 2 PLatinum chaps, what drivers are you using?

Similar Messages

Maybe you are looking for