Neo-2 Platinum compatibility issue with ATI cards?

Iv'e just bought a MSI 865PE Neo-2 Platinum board and i get alot of blue screens related to video card drivers... i've tried using catalyst 4.7 to recent 4.11 and it doesn't stop the blue screens...
Is there a way that ATI radeon cards are incompatible with MSI boards? (running a sapphire 9600XT 3 months old)

The 9600 card is on the compatability list, http://www.msi.com.tw/html/products/mainboard/testreport_pdf/6728v2.0/vga.pdf --not the specific Sapphire card though. I would imagine that sapphire cards would work fine with the MOBO. Was this a clean install of windows or did you just plop the old HD from the old MOBO into the new? You need to do a fresh install of windows, or at least a windows repair, when switching MOBOs. I'm guessing here. You need to give us specific system specs, and what is going on when the BSODs occur. We might be able to help you better with more information.

Similar Messages

K8N Neo 2 Platinum - Any issues with with a ATI 1950pro 512MD AGP?

Hello, I have always bought NVIDIA based cards and I am thinking of moving to ATI. The 1950pro 512MB AGP card looks like it is going to be that last AGP card and I want to keep my rig a little longer before I go to PCI-e.
A few years ago I remember that I stayed away from ATI because the catalyst drivers were know to have some issues. Does anybody know of any issues that I might experience with my board and ATI? Of course, I will make sure that I wipe the NVIDA graphic drives from my system completely.
Thanks!

No known issues (as far as I know). Just the fastest agp card around. Drivers quite good, not more or less problems than with nvidia drivers. There will be also no problem because of nvidia chipset board and ati vga, very common combination. Nothing that should hold you back from getting it.
Although I'd choose 256mb version because 512mb won't cause any noticeable performance improvement compared to 256mb. Better buy Powercolor 1950Pro with silent accelero X2 installed: http://www.powercolor.com/global/main_product_series.asp?int=agp&chp=x1950

All of a sudden File compatability issues with IPhoto & digital camera

Anyone have issues or solutions for solving file compatability issues with IPhoto & digital camera? Worked okay for years but all of a sudden giving me error messages about file format. My camera uses Jpeg.

There is an issue ongoing between 10.6 and Kodak cameras. Workround: use a USB Card Reader.
Regards
TD

HT5306 I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? compatibility issues with wh

Hello:
Thank you for the update for remote access for desktops.
Personally, I do not want to give remote access to anyone but myself as privacy is my friend. Can this remote desktop software still be for me personally unless I allow access and for my MAC lap top only? What if I do not update? I do use this lap top in other countries. compatibility issues with what?

Apple Remote Desktop is off be default. It has to be enabled for some one to be able to remotely connect to the computer. And then, you still have to have a user name and password on the computer to remotely connect with.
If you want to see if remote access has is enabled for Apple Remote Desktop; you can find the setting in, Apple Menu, System Prefrences, Sharing. If it's enabled, Remote Management or Screen Sharing will be checked.
Beucase Apple Remote Desktop Agent is part of the Mac Operating System; even if your not using it, Apple Software Updates will from time to time offer updates for ARD Agent. Software Updates can some times be stacked ontop of each other; so chosing not to install an update, can mean other updates you may want may not be offered. At least until you install the updates those updates require. Also software updates can improve the security of your computer.

Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers and my iTunes wifi sync isn't working. Anyone else having the same problems?

Since updating my iPhone 4 to iOS 5.1 I'm having compatibility issues with my speakers / docking station and my iTunes wifi sync isn't working. Anyone else having the same problems? Both worked fine until the update...

Okay. I got it working again by setting it up as a new phone instead of just syncing. Then I backed up. All is good today.

OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.
Everything works perfectly previously on 10.8.4 and 10.8.5. I did not test on 10.9.0 as I went straight to 10.9.1. Anyone else having this problem? Any thoughts on resolution?

OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
Hope this helps if anyone has a similar issue

Adobe Acrobat 8 Standard compatibility issues with Office 2007 and Windows 7

I just updated my platform to Windows 7 and upgraded from Microsoft Office 2003 to Microsoft Office 2007. The PDF printer did not download and realized that there are compatibility issues with Office 2007. How could I get this fixed?

Buy Acrobat 11.

Compatibility issues with mac OS - Lightroom 4 works where CS5 won't

Hope someone can shed some light on this issue...
I tried installing Lightroom 4 on Mac OS 10.6.1 (which is currently running CS5 without issues) but the specs call for OS 10.6.8 or later (10.7). When I updated my OS to 10.6.8, none of my CS5 apps work! They encounter launch errors - InDesign, Illustrator, Dreamweaver... only Photoshop seems to work. So, I reverted back to OS 10.6.1 and all the programs function. Is Adobe working on a solution to fix this issue? I see with the forums that several other users have noted the same issue with CS5 not working in the OS 10.6.8 environment. I don't want to upgrade my OS just to have Lightroom function, but none the CS apps. I was thinking of partitioning my HD to load both OS, but that shouldn't be the workaround. I am very disappointed that I've purchased Lightroom 4 and now am unable to use it due to compatibility issues with the OS with the rest of CS5.0.

Pixelzboy are you receiving any specific errors when launching your applications under 10.6.8? CS5 should work just fine with 10.6.8 as well as 10.7.3. You may also want to post to the product specific forums with your launch errors as the users in those forums will be more familiar with troubleshooting steps specific to those products.

Are there compatibility issues with 1st gen I pad and new wireless printers?

Need to replace HP printer being used with 1st Gen I Pad. Are there any compatibility issues with new wireless printers?

Hello jxroads,
Welcome to the Apple Support Communities!
I understand that you are going to replace your printer and would like more information on what printers are supported for AirPrint. The attached article has a list of AirPrint printers currently supported for iOS devices.
About AirPrint - Apple Support
Cheers,
Joe

LMS 4.2.3 - C6500 VSS - Issue with inline card on secondary chassis

Hello,
We are currently setting up a fresh new LMS 4.2.3 server to administrate a 90 LAN-device-perimiter. Installation is OK (on a Windows Server), devices are up, monitored and their configurations archived.
The core switches are Catalyst 6506 VSS (s2t54-IPSERVICESK9-M - 15.1(1)SY) including 2 inlines cards :
- WS-C6505E-SUP2T
- WS-X6824-SFP-2T
There is an issue with line card WS-X6824-SFP-2T recognition on secondary chassis only. We updated the last software packages for LMS (via Admin > Software Center > Device Update) and situation improved but still, it is not behaving as excepted.
Impact : Topology, Ciscoview and Device Center for C6506-VSS do not show the card and links on the WS-X6824-SFP-2T of secondary chassis.
Do you have this issue as well ? Any direction or help ?
I am afraid of a potential bug...
Rgds,
Yoann

When you were placing the internal test calls, where was your phone located? The RTP streams are usually only set up between the two endpoints (assuming no transcoder or MTP is used).
Have you have already checked calls between IP phones at your central site (where Unity is located) and IP Phones at site A? Are these working fine? If not, then it's likely you do have a QoS issue over the WAN to Site A.
Have you confirmed whether or not calls from the PSTN gateway at site A experience any voice QoS issues when transferred to an IP Phone at the central site?
Is the same codec is being used for the MGCP gateway as for IP Phones at that site (check the Region settings for the Device Pool it's in)?
If these things have all been checked, then you may want to consider collecting a simultaneous sniffer trace from each end of a single call, and comparing what's seen at the two endpoints.
Kind regards,
Craig

Microsoft ERP MA (3.3.1077.2) for SAP and compatibility issues with SAP 6.0

Hi all,
I want to configure the ERP MA (3.3.1077.2) for SAP on ILM 2007 in order to synchronize passwords between AD and SAP. I have several instances of SAP. The SAP versions are as follow:
SAP ECC 6.0 7.00 - 64bit
SAP ECC 6.4 7.01 - 64bit
SAP BI 7.1 7.01 - 64bi
I was wondering whether there are compatibility issues with any of the above mentioned versions.
Your feedback is appreciated.
Regards,

Did you install a Java machine JRE ? If no, when you do the drag and drop you have the popup but it does work
[http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html |http://www.download.com/Java-Runtime-Environment-JRE-/3000-2417_4-10009607.html]

HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

How do you solve an issue with the card? I don't get the option of 'none'

I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
#1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
#2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
#3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
#4 Click on App Store (upper center of screen).
#5 Scroll down the screen page until you see Top Free Apps on the right side.
#6 Choose any one of the FREE apps.
#7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
#8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
What a pain in the keester, eh?

I have to downgrade from Yosemite to Snow Leopard because of compatibility issues with some of my software. Can I use PS Elements 12 with snow leopard?

I have to downgrade from Yosemite to Snow Leopard because of compatibility issues with some of my software. Can I use PS Elements 12 with snow leopard?

PSE12 became a 64 bit app for the first time on Mac. The recommended system requirements are Mac OS X v10.7 through v10.8.
Are you not able to use lion or Mountain Lion?

E2100L Cisco Connect and Network Magic compatibility issues with Mac OS X 10.7 Lion

When you will release the latest version for Wireless router Linksys E2100L?, because I bought a MAC with Lion and I can´t use my Router.
Regards,
Daniel

Older versions of Cisco Connect for Mac computers have compatibility issues with the latest release of Mac OS X (10.7 “Lion”). Only Cisco Connect versions 1.4.11222 and newer are compatible with the Lion operating system.
Here is the link to ensure that Cisco Connect can be installed on your Mac: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=a4e763be954243cfa0ab960c0fac7105_KB_23xxx_EN_v1.xm...
There is no such information about the release of Cisco Connect for E2100L for the Mac OS X (10.7 “Lion”) compatibility, so you need to wait for further release of the firmrware for E2100L.

Known compatibility issues with 2008 and 2008 R2

For some reason i am not able to make remote connections from VS 2013 to my current installation of SQL server 2008 so i thought to uninstall it and install another edition i got from MSDN but i the uninstall process keeps failing saying theres a known
compatibility issues with 2008 and 2008 R2. it also gave me the option to seek solution online but when i click on it it is unable to get a solution online and i am never able to uninstall it. please help me here. i need to get SQL server up and running. thanks

Hi FLORENCEOKOSUN,
According to your description, you encounter a compatibility issue when uninstalling SQL Server 2008. For further analysis, please help to post the full error message and
SQL Server summary log. By default, the log can be found in: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
There is also a KB article about known issues of installing SQL Server 2008 on Windows Server 2008 R2 for your reference.
https://support.microsoft.com/en-us/kb/955725
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Neo-2 Platinum compatibility issue with ATI cards?

Similar Messages

Maybe you are looking for