Neo V Network Selection always Returns to Default "WCDMA/GSM" on Startup

I prefer to set the network selection to WCDMA only to get better voice call quality. However since updating to 4.1.B.0.587, the phone always set to default "WCDMA/GSM" on startup then I need to manually set it again to "WCDMA only". It is not so disturbing, but previous firmware releases doesn't have this problem. Sony, please fix it in next firmware.

This is an already report issue and our developers are looking into to it as we speak.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Select query on table rcv_lots_interface is always returning null

Hi ,
I need a help on the below issue.
The issue is after creating PO in Oracle 11i I receive it in MSCA application.
When we receive it at that point data gets inserted in the table " rcv_transactions_interface " and we have written a trigger on it.
From the trigger on table " rcv_transactions_interface " we are calling a package and in the package we have select query on "rcv_lots_interface."
But the select query is always returning null even though we are passing the correct "interface_transaction_id " and also after the "Receiving Transaction Processor" is executed i can see data in the table " RCV_LOT_TRANSACTIONS " for the same transaction.
Below is the sample code i am using.
CREATE OR REPLACE TRIGGER inv.RCV_TRAN_TRIGGER
AFTER UPDATE
ON po.rcv_transactions_interface
FOR EACH ROW
WHEN (NEW.processing_status_code='PENDING'
AND NEW.destination_type_code IN ('INVENTORY','RECEIVING')
AND NEW.mobile_txn = 'Y')
DECLARE
PRAGMA AUTONOMOUS_TRANSACTION;
v_user_id NUMBER;
v_interface_transaction_id NUMBER;
v_organization_id NUMBER;
v_item_id NUMBER;
v_quantity NUMBER;
v_resp_id NUMBER;
v_mobile_txn VARCHAR2(5);
v_shipment_header_id NUMBER;
v_bill_of_lading VARCHAR2(100);
v_group_id NUMBER;
v_header_interface_id NUMBER;
BEGIN
v_interface_transaction_id := :NEW.interface_transaction_id;
v_organization_id := :NEW.to_organization_id;
v_user_id := :NEW.created_by;
v_item_id := :NEW.item_id;
v_quantity := :NEW.quantity;
v_resp_id :=fnd_profile.VALUE('RESP_ID');
v_transaction_type := :NEW.transaction_type;
v_mobile_txn := :NEW.mobile_txn;
v_bill_of_lading := :NEW.bill_of_lading;
v_group_id := :NEW.group_id;
v_header_interface_id := :NEW.HEADER_INTERFACE_ID;
INV.INV_RCV_TRX_PKG.INV_RCV_LABEL_GEN_PRC( v_user_id,
v_interface_transaction_id,
v_item_id,
v_quantity,
v_organization_id,
v_resp_id,
v_shipment_header_id,
v_bill_of_lading,
v_header_interface_id,
v_group_id);
END;
CREATE OR REPLACE PACKAGE BODY INV.INV_RCV_TRX_PKG
AS
PROCEDURE INV_RCV_LABEL_GEN_PRC( p_user_id IN NUMBER,
p_interface_transaction_id IN NUMBER,
p_item_id IN NUMBER,
p_quantity IN NUMBER,
p_organization_id IN NUMBER,
p_resp_id IN NUMBER,
p_shipment_header_id IN NUMBER,
p_bill_of_lading IN VARCHAR2,
p_header_interface_id IN NUMBER ,
p_group_id IN NUMBER
IS
v_user_id NUMBER;
v_print BOOLEAN;
v_resp_id NUMBER;
v_resp_appl_id NUMBER;
v_lot_num VARCHAR2(50);
BEGIN
BEGIN
SELECT application_id
INTO v_resp_appl_id
FROM apps.fnd_responsibility_tl frt
WHERE responsibility_id=p_resp_id;
END;
apps.fnd_global.apps_initialize(p_user_id, p_resp_id, v_resp_appl_id);
BEGIN
SELECT rli.lot_num , rli.expiration_date
INTO v_lot_num ,
v_expiration_date
FROM apps.rcv_lots_interface rli
WHERE rli.interface_transaction_id = p_interface_transaction_id ;
EXCEPTION
WHEN OTHERS THEN
v_lot_num :=NULL;
v_expiration_date :=NULL;
apps.fnd_file.put_line(fnd_file.log,'Exception while deriving LOT Number ######### '||p_interface_transaction_id||'------'||SQLERRM);
END;
END;
Need your help to understand why the below query is always returning null and what is the solution for it ?
SELECT rli.lot_num , rli.expiration_date
FROM apps.rcv_lots_interface rli
WHERE rli.interface_transaction_id = p_interface_transaction_id ;
Thanks
Jaydeep
Edited by: user10454886 on Mar 25, 2013 6:31 AM
Hi ,
I need a solution to this issue at the earliest.
Appreciate all of your help
Thanks
Jaydeep

Centinul wrote:
There are a lot of bugs listed in Metalink with respect to wrong results and function-based indexes.
Here are a few:
Bug 4028186 Wrong results if function based index exists
Bug 4717546 Wrong results / poor plan when function based index exists
Bug 5092688 Wrong results if function based index exists
Based on reviewing them the workarounds range from dropping the index to setting "_disable_function_based_index" to TRUE.Facinating. It seems to me that if you use the undocumented intitialization parameter you might just as well drop the FBIs too.
Another hazard of FBIs is the Law of Unintended Consequences. 2 years ago we tried to use one to speed up a query in a PL/SQL package. Worked OK for that purpose, but an unrelated loader on the affected table ran and rand but never finished until the FBI was dropped.

Default hostnameverifier always returns false ...

Hi,
I am trying to run wsdl2java by supplying an https URL. The JVM args that I am using are:
javax.net.ssl.trustStore=E:/Romil/projects/AirDeccanPlugin/localhost.ks
java.protocol.handler.pkgs=com.sun.net.ssl.internal.www.protocol
On running wsdl2java, I end up getting the following exception:
java.io.IOException: wrong hostname : should be <...>
I've verified that the hostname (IP address) in the URL exactly matches the CN (IP address) in the server certificate .
When I look at the JSSE code, it seems like the default HostnameVerifier always returns "false".
I also couldnt figure out a non-programatical way of supplying my own
HostnameVerfier to JSSE that returns a "true"
Any solutions/thoughts ?
Thanks and regards,
Romil

try this code before creating a connection
com.sun.net.ssl.HostnameVerifier hv=new com.sun.net.ssl.HostnameVerifier() {
public boolean verify(String urlHostname, String certHostname) {
System.out.println("Warning: Hostname is not matched for cert: "+urlHostname+ certHostname);
return true;
com.sun.net.ssl.HttpsURLConnection.setDefaultHostnameVerifier(hv);
this should solve your problem
cheers

Xcontrol always returns default value

I have an Xcontrol that holds an enum in the data in shift register. I have a control on the Xcontrol and that should update the value that will be returned whent the control is read, but the control only ever returns the default value of the enum. I have tried updating the value in the data in shift register, and the data in element of the display state in shift register, and neither works. I can change the Xcontrol using the value propery of a property node. How do I do the same thing with a front panel control of the Xcontrol?

Post your code so we can see what you're doing. We might be able to give some advice then.
Kelly Bersch
Certified LabVIEW Developer
Kudos are always welcome

CHOOSE Menu Malfunction, HP 48G Always returns "0" regardless of selection

I have a choose menu with various functions that prove useful when dealing with circles. I programmed it on my HP 50g and transferred it directly to my HP 48g via ASCII Kermit. The choose menu does not appear to highlight a specific choice as it does on the HP 50g, there is no indication as to which choice is selected, and jumping to menu options via entereing their number also does not function. On the debugger, no matter if OK or Enter is selected on any option "0" is always returned, as if I had cancled out of the menu. Any help would be appreciated. Perhaps CHOOSE menus are slightly different on the HP 48G?

Hi!, Ranothil: Can you write, the program with, global variables << >>, what your create, in your HP50G, for comparision, if are compatible 100% with HP48G ?. I'm have HP48G+/HP49G/HP50G. I'think, what, isn't compatible. Check entries equivalences ...HP48G/HP48G+https://staff.fnwi.uva.nl/c.dominik/hpcalc/entries/hp48g/entries.pdf HP49/HP50Ghttp://www.hpcalc.org/details.php?id=3248

How can I return to 'default' display parameters?

I opened 'Display' in System Preferences to adjust the brightness of my screen.
Somehow the screen resolution got changed, and there doesn't appear to be any 'return to default' or 'return to previous settings' option.
I now have a display with a 1" border on the left and right (non-adjustable via the mouse) -- also on-screen text doesn't look quite like it did before.
How do I get back to the original settings? (What in fact are the 'original' settings (i.e., factory defaults)?
Thanks!

stevenray1 wrote:
It seems that as soon as the mouse pointer is dragged over the 'screen resolution' options (on the Display page) they just reset immediately on the spot, without requesting confirmation.
(Universal Access settings were all already selected as you suggested.)
Your welcome. Yeah it just happens sometimes. I always include the universal access part because sometimes when this happens they change too.

Checkboxes in nested repeaters always return false

I display a table using nested <netui-data:repeater> tag sets.
<p>
In the left column of the table, I have a checkbox to indicate user row selections for further action. These checkboxes are bound to an array of Row objects that have a boolean field indicating whether they are selected. These work great and I can iterate through the array of Row objects returned in the (pageflow-scoped) form.
<p>
In the first (header) row of the table, each cell contains the column name and a checkbox to allow the user to hide columns they don't want to see. These checkboxes are bound similarly to an array of Column objects with Boolean (used to be boolean, tried the object type to see if it helped) indicating their selected state. The initial values of the checkboxes are correct - they are all displayed as "checked"/true - so the data binding seems ok at this point.
<p>
PROBLEM: The selected values returned from the JSP are always all set to false for the Column objects! The only real coding difference is that the column checkboxes are rendered within a set of nested <netui-data:repeater> tags inside the set that render the row checkboxes (see below).
<p>
The {pageFlow.activity3Form.rows} are of type RowData with fields/getters/setters for fields:
private boolean selected;
private String[] fieldData;
private long oid;
<p>
The {pageFlow.activity3Form.columns} are of type Column with fields/getters/setters for fields:
private Boolean selected;
private String columnName;
private int columnIndex;
<p>
activity3Form contains a bunch of fields including:
private RowData[] rows;
private Column[] columns;
<p>
JSP code for the table:
<code>
<table width="2000" border="0">
<tr class="style3" valign="top" bgcolor="#ffffff">
<th colspan="150" class="style3_3" align="left">
<netui:anchor action="showAllDataAL3" formSubmit="true">Show All Data</netui:anchor>
<netui:anchor action="showDefaultDataAL3" formSubmit="true">Show Default Data</netui:anchor>
<netui:anchor action="showSelectedDataAL3" formSubmit="true">Show Selected Data</netui:anchor>
</th>
</tr>
<tr>

<netui-data:repeater dataSource="{pageFlow.activity3Form.rows}">
<netui-data:repeaterHeader>
<table class="tablebody" border="0" cellpadding="1" cellspacing="3">
<tr class="style3" valign="top" bgcolor="#ffffcc">
<th bgcolor="#89fbfb" nowrap valign="bottom">
<input type="checkbox" name="checkall" onclick="checkUncheckAll(this);"/>All
</th>
<netui-data:repeater dataSource="{pageFlow.activity3Form.columns}">
<netui-data:repeaterItem>
<th valign="bottom">
<netui:label value="{container.item.columnName}" defaultValue=" "/><br>
<netui:checkBox dataSource="{container.item.selected}"/>
</th>
</netui-data:repeaterItem>
</netui-data:repeater>
<th align="left" nowrap valign="bottom">
Transaction Status<br>
<input type="radio" name="setall" value="Update" onclick="setAllRadioGroupsTheSame(this, 'Update');">Update
<input type="radio" name="setall" value="Hold" onclick="setAllRadioGroupsTheSame(this, 'Hold');">Hold
<input type="radio" name="setall" value="Proof" onclick="setAllRadioGroupsTheSame(this, 'Proof');">Proof
<input type="radio" name="setall" value="Reject" onclick="setAllRadioGroupsTheSame(this, 'Reject');">Reject
<input type="radio" name="setall" value="Unset" onclick="setAllRadioGroupsTheSame(this, 'Unset');">Unset
</th>
</tr>
<tr class="style3" valign="top" bgcolor="#facf92">
</tr>
</netui-data:repeaterHeader>
<netui-data:repeaterItem>
<tr class="style3_3" valign="top" bgcolor="#89fbfb">
<td background="#ffffff"><netui:checkBox dataSource="{container.item.selected}"/></td>
<netui-data:repeater dataSource="{container.item.fieldData}">
<netui-data:repeaterItem>
<td nowrap><netui:label value="{container.item}" defaultValue=" "></netui:label></td>
</netui-data:repeaterItem>
</netui-data:repeater>
<td align="left" nowrap>
<netui:radioButtonGroup tagId="subGroup" dataSource="{container.item.oid}" labelStyleClass="style3_1">
<netui:radioButtonOption value="Update">Update</netui:radioButtonOption>
<netui:radioButtonOption value="Hold">Hold</netui:radioButtonOption>
<netui:radioButtonOption value="Proof">Proof</netui:radioButtonOption>
<netui:radioButtonOption value="Reject">Reject</netui:radioButtonOption>
<netui:radioButtonOption value="Unset">Unset</netui:radioButtonOption>
</netui:radioButtonGroup>
</td>
</tr>
</netui-data:repeaterItem>
<netui-data:repeaterFooter></table></netui-data:repeaterFooter>
</netui-data:repeater>
</tr>

</table>
</code>

<p>
A bit more info - how the HTML is rendered to the browser:
<p>
The failing (and initially checked/true) column checkboxes are generated as:
<br>
<input type="hidden" name="wlw-checkbox_key:{pageFlow.activity3Form.columns[0].selected}OldValue" value="false"><input type="checkbox" name="wlw-checkbox_key:{pageFlow.activity3Form.columns[0].selected}" checked>
<p>
The working (and initially unchecked/false) row checkboxes are generated as:
<br>
<input type="hidden" name="wlw-checkbox_key:{pageFlow.activity3Form.rows[0].selected}OldValue" value="false"><input type="checkbox" name="wlw-checkbox_key:{pageFlow.activity3Form.rows[0].selected}">

Wallpaper returns to default

Hello apple genius
I have a MacBook pro 17" i7 with mountain lion installed.
When I go choose my wallpaper folder (that I have made in my pictures folder) it returns to default apple wallpaper folder, after restarting, and my newly folder is gone, and I have to start all over again?
I was thinking that i could find the original wallpaper folder and place all my own photos in that folder, but I can't find it? - anyone knows where that folder is at?
Or, anyone knows why it returns to default folder?
Thanks in advance, for helping me!
/M

No. I was sitting at the Administrator computer. Selected all computers and restarted them when this happened.
If I sit in front of each one of them and select the restart command this DOES NOT happen.
I was able to restart with no problems with every previous versions of ARD (even with Apple Network Assistant in OS9) but current doen´t work anymore.
Using 3.3 version on Administrator and terminals.
Thanks a lot.

Request.getParameter() always returns null

I have a html file and am trying to retrieve the values from a formin my servlet.
here is the html code:
<html>
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<h1><b>Add DVD</b></h1>
</head>
<body>
<form action="add_dvd.do" method="POST">
Title:<input type="text" name="title" />
Year:<input type="text" name="year" />
Genre: <select name='gselected'>
<option value='Sci-Fi'>Sci-Fi</option>
</select>
or enter new genre:<input type="text" name='gentered' value="" />
<input type="submit" value="Add DVD" />
</form>
</body>
</html>
and here is the servlet code:
public class AddDVDServlet extends HttpServlet {
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
// System.out.println("in AddDVDServlet post method");
List errorMsgs = new LinkedList();
//retrieve form parameters
try{
String title = request.getParameter("title").trim();
String year = request.getParameter("year").trim();
*String gentered = request.getParameter("gentered");
String gselected = request.getParameter("gselected");
String genre="";
if("".equals(gentered))
genre = gselected;
else
genre = gentered;
// System.out.println("parameter retrieved");
if(!year.matches("\\d\\d\\d\\d"))
// System.out.println("year not 4 digit long");
errorMsgs.add("Year must be four digit long");
if("".equals(title))
// System.out.println("title not entered");
errorMsgs.add("Please enter the title of the dvd");
if("".equals(genre))
// System.out.println("genre not valid");zdf
errorMsgs.add("Enter genre.");
if(! errorMsgs.isEmpty())
//System.out.println("errors in entry ");
request.setAttribute("errors",errorMsgs);
// System.out.println("error attribute set in request");
RequestDispatcher rd = request.getRequestDispatcher("error.view");
rd.forward(request, response);
return;
//create DVDItem instance
DVDItem dvd = new DVDItem(title,year,genre);
request.setAttribute("dvdItem",dvd);
RequestDispatcher rd = request.getRequestDispatcher("success.view");
rd.forward(request, response);
catch(Exception e){
errorMsgs.add(e.getMessage());
request.setAttribute("errors",errorMsgs);
RequestDispatcher rd = request.getRequestDispatcher("error.view");
rd.forward(request, response);
e.printStackTrace();
System.out.println("exception:"+e);
why does getParameter always return null??? whats wrong?

I don't know. However, I suspect that because you have a tag with the same name as 'title', its causing a name conflict. Chnage the name to something else. If it works, then that's the likely explaination.

Global Temp Table, always return zero records

I call the procedure which uses glbal temp Table, after executing the Proc which populates the Global temp table, i then run select query retrieve the result, but it alway return zero record. I am using transaction in order to avoid deletion of records in global temp table.
whereas if i do the same thing in SQL navigator, it works
Cn.ConnectionString = Constr
Cn.Open()
If FGC Is Nothing Then
Multiple = True
'Search by desc
'packaging.pkg_msds.processavfg(null, ActiveInActive, BrandCode, Desc, Itemtype)
SQL = "BEGIN packaging.pkg_msds.processavfg(null,'" & _
ActiveInActive & "','" & _
BrandCode & "','" & _
Desc & "','" & _
Itemtype & "'); end;"
'Here it will return multiple FGC
'need to combine them
Else
'search by FGC
SQL = "BEGIN packaging.pkg_msds.processavfg('" & FGC & "','" & _
ActiveInActive & "','" & _
BrandCode & "',null,null); end;"
'will alway return one FGC
End If
' SQL = " DECLARE BEGIN rguo.pkg_msds.processAvedaFG('" & FGC & "'); end;"
Stepp = 1
Cmd.Connection = Cn
Cmd.CommandType = Data.CommandType.Text
Cmd.CommandText = SQL
Dim Trans As System.Data.OracleClient.OracleTransaction
Trans = Cn.BeginTransaction()
Cmd.Transaction = Trans
Dim Cnt As Integer
Cnt = Cmd.ExecuteNonQuery
'SQL = "SELECT rguo.pkg_msds.getPDSFGMass FROM dual"
SQL = "select * from packaging.aveda_mass_XML"
Cmd.CommandType = Data.CommandType.Text
Cmd.CommandText = SQL
Adp.SelectCommand = Cmd
Stepp = 2
Adp.Fill(Ds)
If Ds.Tables(0).Rows.Count = 0 Then
blError = True
BlComposeXml = True
Throw New Exception("No Record found for FGC(Finished Good Code=)" & FGC)
End If
'First Row, First Column contains Data as XML
Stepp = 0
Trans.Commit()

Hi,
This forum is for Oracle's Data Provider and you're using Microsoft's, but I was curious so I went ahead and tried it. It works fine for me. Here's the complete code I used, could you point out what are you doing differently?
Cheers,
Greg
create global temporary table abc_tab(col1 varchar2(10));
create or replace procedure ins_abc_tab(v1 varchar2) as
begin
insert into abc_tab values(v1);
end;
using System;
using System.Data;
using System.Data.OracleClient;
class Program
    static void Main(string[] args)
        OracleConnection con = new OracleConnection("data source=orcl;user id=scott;password=tiger");
        con.Open();
        OracleTransaction txn = con.BeginTransaction();
        OracleCommand cmd = new OracleCommand("begin ins_abc_tab('foo');end;", con);
        cmd.Transaction = txn;
        cmd.ExecuteNonQuery();
        cmd.CommandText = "select * from abc_tab";
        OracleDataAdapter da = new OracleDataAdapter(cmd);
        DataSet ds = new DataSet();
        da.Fill(ds);
        Console.WriteLine("rows found: {0}", ds.Tables[0].Rows.Count);
        // commit, cleanup, etc ommitted for clarity
}

Call thirty party java web service but always return null

hi
I call a java web service in my application visual studio 2008 c#, but always return NULL.
I used Tool Fiddler to monitor the traffic between my client and the web service server, it showed the return is not Null.
Here is my code, please see if anything I do wrong.
namespace CanOfficer_THQ_vs_IHQ.TestWebReferenceAppointment {
using System.Diagnostics;
using System.Web.Services;
using System.ComponentModel;
using System.Web.Services.Protocols;
using System;
using System.Xml.Serialization;
/// <remarks/>
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.Web.Services", "2.0.50727.5483")]
[System.Diagnostics.DebuggerStepThroughAttribute()]
[System.ComponentModel.DesignerCategoryAttribute("code")]
[System.Web.Services.WebServiceBindingAttribute(Name="AppointmentServiceSoapBinding", Namespace="http://service.ips.salvationarmy.org/")]
public partial class AppointmentService : Microsoft.Web.Services3.WebServicesClientProtocol {
private System.Threading.SendOrPostCallback deleteAppOperationCompleted;
private System.Threading.SendOrPostCallback importAppOperationCompleted;
private System.Threading.SendOrPostCallback editAppOperationCompleted;
private bool useDefaultCredentialsSetExplicitly;
/// <remarks/>
public AppointmentService() {
this.Url = global::CanOfficer_THQ_vs_IHQ.Properties.Settings.Default.CanOfficer_THQ_vs_IHQ_TestWebReferenceAppointment_AppointmentService;
if ((this.IsLocalFileSystemWebService(this.Url) == true)) {
this.UseDefaultCredentials = true;
this.useDefaultCredentialsSetExplicitly = false;
else {
this.useDefaultCredentialsSetExplicitly = true;
public new string Url {
get {
return base.Url;
set {
if ((((this.IsLocalFileSystemWebService(base.Url) == true)
&& (this.useDefaultCredentialsSetExplicitly == false))
&& (this.IsLocalFileSystemWebService(value) == false))) {
base.UseDefaultCredentials = false;
base.Url = value;
public new bool UseDefaultCredentials {
get {
return base.UseDefaultCredentials;
set {
base.UseDefaultCredentials = value;
this.useDefaultCredentialsSetExplicitly = true;
/// <remarks/>
public event deleteAppCompletedEventHandler deleteAppCompleted;
/// <remarks/>
public event importAppCompletedEventHandler importAppCompleted;
/// <remarks/>
public event editAppCompletedEventHandler editAppCompleted;
/// <remarks/>
[System.Web.Services.Protocols.SoapDocumentMethodAttribute(
RequestNamespace="http://service.ips.salvationarmy.org/",
ResponseNamespace="http://service.ips.salvationarmy.org/",
Use=System.Web.Services.Description.SoapBindingUse.Encoded,
ParameterStyle=System.Web.Services.Protocols.SoapParameterStyle.Wrapped)]
[return: System.Xml.Serialization.XmlElementAttribute("return", Form=System.Xml.Schema.XmlSchemaForm.Unqualified)]
public string deleteApp([System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] int id) {
object[] results = this.Invoke("deleteApp", new object[] {
id});
return ((string)(results[0]));
/// <remarks/>
public void deleteAppAsync(int id) {
this.deleteAppAsync(id, null);
/// <remarks/>
public void deleteAppAsync(int id, object userState) {
if ((this.deleteAppOperationCompleted == null)) {
this.deleteAppOperationCompleted = new System.Threading.SendOrPostCallback(this.OndeleteAppOperationCompleted);
this.InvokeAsync("deleteApp", new object[] {
id}, this.deleteAppOperationCompleted, userState);
private void OndeleteAppOperationCompleted(object arg) {
if ((this.deleteAppCompleted != null)) {
System.Web.Services.Protocols.InvokeCompletedEventArgs invokeArgs = ((System.Web.Services.Protocols.InvokeCompletedEventArgs)(arg));
this.deleteAppCompleted(this, new deleteAppCompletedEventArgs(invokeArgs.Results, invokeArgs.Error, invokeArgs.Cancelled, invokeArgs.UserState));
/// <remarks/>
[System.Web.Services.Protocols.SoapDocumentMethodAttribute(
RequestNamespace="http://service.ips.salvationarmy.org/",
ResponseNamespace="http://service.ips.salvationarmy.org/",
Use=System.Web.Services.Description.SoapBindingUse.Encoded,
ParameterStyle=System.Web.Services.Protocols.SoapParameterStyle.Wrapped)]
[return: System.Xml.Serialization.XmlElementAttribute("return", Form=System.Xml.Schema.XmlSchemaForm.Unqualified)]
public string importApp(
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] int person,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string name,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string territory,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string location,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] bool primary,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] Nullable<System.DateTime> start,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] Nullable<System.DateTime> end,
[System.Xml.Serialization.XmlElementAttribute("categories", Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string[] categories) {
object[] results = this.Invoke("importApp", new object[] {
person,
name,
territory,
location,
primary,
start,
end,
categories});
return ((string)(results[0]));
/// <remarks/>
public void importAppAsync(int person, string name, string territory, string location, bool primary, Nullable<System.DateTime> start, Nullable<System.DateTime> end, string[] categories) {
this.importAppAsync(person, name, territory, location, primary, start, end, categories, null);
/// <remarks/>
public void importAppAsync(int person, string name, string territory, string location, bool primary, Nullable<System.DateTime> start, Nullable<System.DateTime> end, string[] categories, object userState) {
if ((this.importAppOperationCompleted == null)) {
this.importAppOperationCompleted = new System.Threading.SendOrPostCallback(this.OnimportAppOperationCompleted);
this.InvokeAsync("importApp", new object[] {
person,
name,
territory,
location,
primary,
start,
end,
categories}, this.importAppOperationCompleted, userState);
private void OnimportAppOperationCompleted(object arg) {
if ((this.importAppCompleted != null)) {
System.Web.Services.Protocols.InvokeCompletedEventArgs invokeArgs = ((System.Web.Services.Protocols.InvokeCompletedEventArgs)(arg));
this.importAppCompleted(this, new importAppCompletedEventArgs(invokeArgs.Results, invokeArgs.Error, invokeArgs.Cancelled, invokeArgs.UserState));
/// <remarks/>
[System.Web.Services.Protocols.SoapDocumentMethodAttribute(
RequestNamespace="http://service.ips.salvationarmy.org/",
ResponseNamespace="http://service.ips.salvationarmy.org/",
Use=System.Web.Services.Description.SoapBindingUse.Encoded,
ParameterStyle=System.Web.Services.Protocols.SoapParameterStyle.Wrapped)]
[return: System.Xml.Serialization.XmlElementAttribute("return", Form=System.Xml.Schema.XmlSchemaForm.Unqualified)]
public string editApp(
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] int id,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string name,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string territory,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string location,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] bool primary,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] Nullable<System.DateTime> start,
[System.Xml.Serialization.XmlElementAttribute(Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] Nullable<System.DateTime> end,
[System.Xml.Serialization.XmlElementAttribute("categories", Form=System.Xml.Schema.XmlSchemaForm.Unqualified)] string[] categories) {
object[] results = this.Invoke("editApp", new object[] {
id,
name,
territory,
location,
primary,
start,
end,
categories});
return ((string)(results[0]));
/// <remarks/>
public void editAppAsync(int id, string name, string territory, string location, bool primary, Nullable<System.DateTime> start, Nullable<System.DateTime> end, string[] categories) {
this.editAppAsync(id, name, territory, location, primary, start, end, categories, null);
/// <remarks/>
public void editAppAsync(int id, string name, string territory, string location, bool primary, Nullable<System.DateTime> start, Nullable<System.DateTime> end, string[] categories, object userState) {
if ((this.editAppOperationCompleted == null)) {
this.editAppOperationCompleted = new System.Threading.SendOrPostCallback(this.OneditAppOperationCompleted);
this.InvokeAsync("editApp", new object[] {
id,
name,
territory,
location,
primary,
start,
end,
categories}, this.editAppOperationCompleted, userState);
private void OneditAppOperationCompleted(object arg) {
if ((this.editAppCompleted != null)) {
System.Web.Services.Protocols.InvokeCompletedEventArgs invokeArgs = ((System.Web.Services.Protocols.InvokeCompletedEventArgs)(arg));
this.editAppCompleted(this, new editAppCompletedEventArgs(invokeArgs.Results, invokeArgs.Error, invokeArgs.Cancelled, invokeArgs.UserState));
/// <remarks/>
public new void CancelAsync(object userState) {
base.CancelAsync(userState);
private bool IsLocalFileSystemWebService(string url) {
if (((url == null)
|| (url == string.Empty))) {
return false;
System.Uri wsUri = new System.Uri(url);
if (((wsUri.Port >= 1024)
&& (string.Compare(wsUri.Host, "localHost", System.StringComparison.OrdinalIgnoreCase) == 0))) {
return true;
return false;
/// <remarks/>
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.Web.Services", "2.0.50727.5483")]
public delegate void deleteAppCompletedEventHandler(object sender, deleteAppCompletedEventArgs e);
/// <remarks/>
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.Web.Services", "2.0.50727.5483")]
[System.Diagnostics.DebuggerStepThroughAttribute()]
[System.ComponentModel.DesignerCategoryAttribute("code")]
public partial class deleteAppCompletedEventArgs : System.ComponentModel.AsyncCompletedEventArgs {
private object[] results;
internal deleteAppCompletedEventArgs(object[] results, System.Exception exception, bool cancelled, object userState) :
base(exception, cancelled, userState) {
this.results = results;
/// <remarks/>
public string Result {
get {
this.RaiseExceptionIfNecessary();
return ((string)(this.results[0]));
/// <remarks/>
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.Web.Services", "2.0.50727.5483")]
public delegate void importAppCompletedEventHandler(object sender, importAppCompletedEventArgs e);
/// <remarks/>
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.Web.Services", "2.0.50727.5483")]
[System.Diagnostics.DebuggerStepThroughAttribute()]
[System.ComponentModel.DesignerCategoryAttribute("code")]
public partial class importAppCompletedEventArgs : System.ComponentModel.AsyncCompletedEventArgs {
private object[] results;
internal importAppCompletedEventArgs(object[] results, System.Exception exception, bool cancelled, object userState) :
base(exception, cancelled, userState) {
this.results = results;
/// <remarks/>
public string Result {
get {
this.RaiseExceptionIfNecessary();
return ((string)(this.results[0]));
/// <remarks/>
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.Web.Services", "2.0.50727.5483")]
public delegate void editAppCompletedEventHandler(object sender, editAppCompletedEventArgs e);
/// <remarks/>
[System.CodeDom.Compiler.GeneratedCodeAttribute("System.Web.Services", "2.0.50727.5483")]
[System.Diagnostics.DebuggerStepThroughAttribute()]
[System.ComponentModel.DesignerCategoryAttribute("code")]
public partial class editAppCompletedEventArgs : System.ComponentModel.AsyncCompletedEventArgs {
private object[] results;
internal editAppCompletedEventArgs(object[] results, System.Exception exception, bool cancelled, object userState) :
base(exception, cancelled, userState) {
this.results = results;
/// <remarks/>
public string Result {
get {
this.RaiseExceptionIfNecessary();
return ((string)(this.results[0]));

Hi;
I used Fiddler to monitor the process, and it showed the request sent thru web service worked and returned a value, but in my .Net application the return captured as NULL. Could you please look into the code above and the result from Filddler and see if
you can help.
thank you.
REQUEST:
POST https://159.253.140.178/services/AppointmentService HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; MS Web Services Client Protocol 2.0.50727.4252)
Content-Type: text/xml; charset=utf-8
SOAPAction: ""
Host: 159.253.140.178
Content-Length: 1589
Expect: 100-continue
Connection: Keep-Alive
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://service.ips.salvationarmy.org/" xmlns:types="http://service.ips.salvationarmy.org/encodedTypes" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing">
<soap:Header>
<wsse:Security mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:UsernameToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>
[email protected]
</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">
tpi4IPSws!
</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soap:Body soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<tns:importApp>
<person xsi:type="xsd:int">
169275
</person>
<name xsi:type="xsd:string">
Corps Officer (Cahul-Russia) Test12
</name>
<territory xsi:type="xsd:string">
CAN
</territory>
<location xsi:type="xsd:string">
TEST LOCATION 12
</location>
<primary xsi:type="xsd:boolean">
true
</primary>
<start xsi:type="xsd:dateTime">
2013-05-30T00:00:00
</start>
<end xsi:type="xsd:dateTime">
2014-06-04T00:00:00
</end>
<categories href="#id1" />
</tns:importApp>
<soapenc:Array id="id1" soapenc:arrayType="xsd:string[1]">
<Item>
vpsCat1
</Item>
</soapenc:Array>
</soap:Body>
</soap:Envelope>
RESPONSE:
HTTP/1.1 200 OK
Server: Apache-Coyote/1.1
Content-Type: text/xml;charset=UTF-8
Content-Length: 232
Date: Fri, 05 Sep 2014 19:45:22 GMT
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<ns2:importAppResponse xmlns:ns2="http://service.ips.salvationarmy.org/">
<return>
OK_572463
</return>
</ns2:importAppResponse>
</soap:Body>
</soap:Envelope>

Bc4j:RowScope on a Master Detail page always returns 0 rows for detail

Hi,
I have a problem with a Master Detail page that is called from another page. The Master Detail page has two View Objects, Budgets and Budget Versions. These are linked properly in BC4J and when I use these VOs together I can navigate through the Budgets (master) and the Budget Versions (details) are populated correctly.
However, I want to navigate to this page from another page which lists all possible Budgets. I pass the key of the selected Budget to the Master Detail page and the correct Budget is displayed, BUT the Budget Versions are NOT displayed - I get 0 rows returned.
The mechanism I use to pass the selected Budget ID to my Master Detail page is:
<ctrl:property name="key">
<ctrl:selection name="ViewTable" key="key"/>
</ctrl:property>
My BC4J Registry is set up as follows:
<bc4j:registryDef>
<bc4j:rootAppModuleDef name="BudgetModule"
defFullName="BudgetPackage.BudgetPackageModule"
configName="BudgetPackageModuleLocal"
releaseMode="stateful">
<bc4j:viewObjectDef name="ItiBudgetsView1">
<bc4j:rowDef name="CurrentBudgetRow" usesCurrency="True">
<bc4j:propertyKey name="key"/>
</bc4j:rowDef>
</bc4j:viewObjectDef>
<bc4j:viewObjectDef name="ItiBudgetVersionsView2" rangeSize="15"/>
</bc4j:rootAppModuleDef>
</bc4j:registryDef>
I then use
<bc4j:rowScope name="CurrentBudgetRow">
to get the correct Budget row in my master VO. But this always returns 0 rows in my detail VO. If I comment out the rowScope element, I don't get the desired Budget row, but I do get the correct Budget Version rows displayed. Is the rowScope element on the Budget VO interfering with the Budget Version VO?
Hope this is not too confusing!!
Thanks,
Steve

Steve,
I tried to create a comparable set of two pages and initially ran into the same problem. I just realized that my issue (which I hope is yours too) is that the rootAppModule name was different across my two pages. This led to each page having its own application module instance, so the currency was different on each page.
By changing all of my pages to use the same application module name (in the registryDef, in the appModuleScope tags in the page, and in the findAppModule tags in the handlers), I resolved this problem.
My event handler to go to the master/detail page from the master page, FYI, looks like this:
<event name="details" >
   <bc4j:findRootAppModule name="MyApp" >
    
    <bc4j:findViewObject name="CustomersView1" >
     
     <bc4j:findRowByKey>
      <bc4j:keyBinding>
       <bc4j:selectionKey name="viewTable" key="key" />
      </bc4j:keyBinding>
     </bc4j:findRowByKey>
    </bc4j:findViewObject>
    <bc4j:executeQuery />
    <go name="OrdersByCustomer_View" redirect="true" />
   </bc4j:findRootAppModule>
</event>Hope this helps.
-brian
UIX Team

Execute oracle stored procedure from C# always returns null

Hi,
I'm trying to execute a stored procedure on oracle 9i. I'm using .Net OracleClient provider.
Apparently, I can execute the stored procedure, but it always returns null as a result (actually all the sp's I have there returns null)! I can execute any text statement against the database successfully, and also I can execute the stored procedure using Toad.
This is not the first time for me to call an oracle stored procedure, but this really is giving me a hard time! Can anyone help please?
Below are the SP, and the code used from .Net to call it, if that can help.
Oracle SP:
CREATE OR REPLACE PROCEDURE APIECARE.CHECK_EXISTENCE(l_number IN NUMBER) AS
v_status VARCHAR2(5) := NULL;
BEGIN
BEGIN
SELECT CHECK_NO_EXISTENCE(to_char(l_number))
INTO v_status
FROM DUAL;
EXCEPTION WHEN OTHERS THEN
v_status := NULL;
END;
DBMS_OUTPUT.PUT_LINE(v_status);
END CHECK_CONTRNO_EXISTENCE;
C# Code:
string connStr = "Data Source=datasource;Persist Security Info=True;User ID=user;Password=pass;Unicode=True";
OracleConnection conn = new OracleConnection(connStr);
OracleParameter param1 = new OracleParameter();
param1.ParameterName = "v_status";
param1.OracleType = OracleType.VarChar;
param1.Size = 5;
param1.Direction = ParameterDirection.Input;
OracleParameter param2 = new OracleParameter();
param2.ParameterName = "l_number";
param2.OracleType = OracleType.Number;
param2.Direction = ParameterDirection.Input;
param2.Value = 006550249;
OracleParameter[] oraParams = new OracleParameter[] { param1, param2 };
OracleCommand cmd = new OracleCommand("CHECK_EXISTENCE", conn);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddRange(oraParams);
conn.Open();
object result = cmd.ExecuteScalar();
conn.Close();

Hi,
Does that actually execute? You're passing two parameters to a procedure that only takews 1 and get no error?
Your stored procedure doesnt return anything and has no output parameters, what are you expecting to be returned exactly?
If you're trying to access V_STATUS you'll need to declare that as either an output parameter of the procedure, or return value of the function, and also access it via accessing Param.Value, not as the result of ExecuteScalar.
See if this helps.
Cheers,
Greg
create or replace function myfunc(myinvar in varchar2, myoutvar out varchar2) return varchar2
is
retval varchar2(50);
begin
myoutvar := myinvar;
retval := 'the return value';
return retval;
end;
using System;
using System.Data;
using Oracle.DataAccess.Client;
public class odpfuncparams
     public static void Main()
      OracleConnection con = new OracleConnection("user id=scott;password=tiger;data source=orcl");
      con.Open();
      OracleCommand cmd = new OracleCommand("myfunc", con);
      cmd.CommandType = CommandType.StoredProcedure;
      OracleParameter retval = new OracleParameter("retval",OracleDbType.Varchar2,50);
      retval.Direction = ParameterDirection.ReturnValue;
      cmd.Parameters.Add(retval);
      OracleParameter inval = new OracleParameter("inval",OracleDbType.Varchar2);
      inval.Direction = ParameterDirection.Input;
      inval.Value="hello world";
      cmd.Parameters.Add(inval);
      OracleParameter outval = new OracleParameter("outval",OracleDbType.Varchar2,50);
      outval.Direction = ParameterDirection.Output;
      cmd.Parameters.Add(outval);
      cmd.ExecuteNonQuery();
      Console.WriteLine("return value is {0}, out value is {1}",retval.Value,outval.Value);
      con.Close();
}

Cascading LOV always returns first row in af:query

HI
JDEV 11.1.1.3.0
A strange thing is happening with my cascading LOV which is input text with LOV.
I have a read only table with a query section. I then also bring up any of the tables rows in a popup with single record view where the row is then in an af:form for inserting and updating.
Both the af:query and af:form have the cascaing LOV in them.
When testing the cascading LOV in the BC Browser it works fine. When I use it in the popup in the af:form record it works fine. But in the af:query section, no matter which row I choose in the LOV, it always returns the 1st row of the LOV back to my input text component.
Has anyone experienced this...any ideas?
Thanks,
Mario

Aha...and the above log message lead me to the solution!! :-)
The VO is based on an Oracle data dictionary view, DBA_TAB_COLUMNS. When you create the read only VO, by default it does not create any of the attributes as "key" attributes, because the oracle view has no primary key.
Setting owner, tableName and columnName as key attributes solved this issue, now my cascading LOV works in the BC Tester, af:query component and my af:form component.
Regards,
Mario

Always displays the default saved search in af:query

hi,
The saved search drop down lists the saved searches but could not select another saved search. The dropdown selected value always point to the default saved search, as well as it's UI in criteria region. The same behavior in saving a new search, it will always refresh to the default. What seems to be the problem here? The current QueryDescriptor point to the new search but the UI always displays the default.
Thanks in advance.

Found the solution. The queryDescriptor getter calls again the default value that's way it doesn't change. Thanks for the time.

Neo V Network Selection always Returns to Default "WCDMA/GSM" on Startup

Similar Messages

Maybe you are looking for