Neo2 865-ls compatibility issue - plz ASAP need advice

Hey guys,
Im recently building a computer with the new 865pe chipset. I tried IS-7 but it was DOA. I rma it. Then I tried asus p4p800 delux...i rma twice cuz thier was problem with my all in wonder ati radeon 9700 pro pn-XXX-10, it have conflict with that version,. Asus and ABit has bad support. Right now im thinking about either getting MSI Or INTEL. INTEL board are reliable and stable but too freaking slow and too skimpy. I want to get MSI 865pe neo2 -ls but alot off ppl have problems with da board ?( ask am reading in this forum. So im confuse. If anybody thier can give me help or tell me that these parts will be compatible with new 865pe neo2-ls. I need advice soon cuz im going back to college in a week and i have to get it set up by then.
My parts.
Cruciall DDR 400
p4 2.8c (800FSB) HT
WD caviar 80gb 8mb cache
sony dvd player
420watts thermalake pure power
ALL IN WONDER 9700 pro - pn version pn-XXXXXXXX-10
Thank you very much guys. :P

Hi Joni Guapz,
There shouldn't be any issue on this board if you do the proper setups accordingly.
1 word of advice for you. This mobo is very very very particular of the RAMs working on it, therefore, please kindly refer to the following page for a list of compatible RAMs:
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=433
Please note that if you are an o/clocker, I suggest you browsing through the older post of the forum through the search engine and see which are the best selected RAMs for your board, or you can go to the following thread by me on Mobo vs RAMs etc... on the top of 1st page and see the pros and cons listed out from individual users.
All in all, this is a very very very good and stable board for me myself(in my signature) and it rocks very smoothly during gaming, ripping music and multi-tasking.
All the Best... :D!!!

Similar Messages

What is the compatibility issues restricting use of Dreamweaver MX2004 with Windows 7

I can't launch an update my website design on Dreamweaver MX2004. Adobe technicians have informed me the application is not compatible with Windows 7. The Dreamweaver was already loaded onto this computer when I took over this assignment. I assumed it was applicable before, so now what are the compatibility issues? I need to launch these updates. Can anyone help or provide directions what to do?

There are other Forum participants running MX2004 on WIN7, much to my surprise, even on 64bit machines.
You may wish to be sure that whoever did the installation on your WIN7 machine, knew enough to also install the 7.01 Updater
http://www.adobe.com/support/dreamweaver/downloads_updaters.html#dwmx2004

Need Advice on Netgear Router

I have a old snow base station that is connected by ethernet cable to my new wireless internet service. The cable goes to an antenna device that receives and transmits the internet signal. The isp wanted me to configure the base station to connect using PPPOE. That initially worked but the connection drops frequently during the day with a lot of effort expended in reacquiring it. They've had me switch the configuration by manually enter the ip address and dns numbers. This worked for a while but is now dropping again.
The isp has recommended using a netgear router which they claim many of their customers are using without issue. I need advice as to which model would be appropriate for a 3 story townhouse. Any advice would be greatly appreciated.
John
Message was edited by: Pappasbike

The old basestaions are notorious for being completely unreliable. I bought the entry level Netgear Router for about $25 and it has been flawless; providing 3 of my roommates with wirless access for over a year.

Compatibility Issues with CS2 and Windows 2000 XP??? This is supposed to be THE one operating system CS2 DOES WORK ON? Can someone help - I really need my CS2 back! Thanks.

HELP! Years ago - SEVEN to be exact- I PURCHASED Adobe CS2 and used it extensively. Then I was in an accident that took five years to recover from. After my recovery I tried to get back to using my Adobe products only to find that Adobe was discouraging use of CS2 and since I OWN a LICENSE and that was the LAST version I used I wanted to begin again with a version I am familiar with. Many months later, apparently I wasn't the only one who wanted to KEEP USING CS2 and now Adobe has made it possible to download this version for PC and MAC, BUT due to OS compatibility issues Adobe continues to discourage downloading and use. HERE'S THE THING: I have the SAME SYSTEM running the SAME OS as when I first PURCHASED IT. I have downloaded the EXACT SAME VERSION of CS2. It installs fine. But I cannot OPEN the application and the troubleshooter reports there are "COMPATIBILITY ISSUES". WHY?!?!?!?!?
I'm on a PC running Windows 2000 XP. I OWN a LICENSE for Adobe CS2 and it used to run on this very same machine. I had to re-format my system two years ago so it has much more free space but when I try to OPEN the application it won't run. When I run the Windows Troubleshooter it reports system compatibility issues?! Can anyone advise me what to try now??? Thank you.

Yes, I have. My system was completely cleaned of everything and I'm just now RE-INSTALLING CS2 for Windows2000 XP from the Adobe site that gives you versions to select for your OS. I have successfully downloaded disks 1,2 and 3 and I can INSTALL disks 1 and 2, but it FAILS at disk 3. I REALLY need to resolve this today because I need to submit some work by tomorrow and the troubleshooting isn't helping!
Can you advise anything else . . . anyone? Thank you!
Khrystle13

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
See:
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Be well...

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

I have just purchased and installed a new Airport extreme base station but now the Airport Utility cannot see my old Airport Express. Are their compatibility issues and do I need to purchase a new Express?

When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

Need help with Snow Leopard compatibility issue

We have a new iMac in (with Snow Leopard) and have loaded all our programs. Due to budgets, we have not made the jump to CS4 and are still on CS3 (waiting for 5). We work in an InDesign/InCopy workflow.
In launching InDesign on the MAc with Snow Leopard, we have noticed that the assignment folders are nonexistant and within the program you can't even open an assignment window. When you reopen on a system without Snow Leopard, the individual assignments are there, but the program states it can't find the main assignment, so it's cancelling out the assignments if opened on the Snow Leopard unit.
Does anyone have any info on compatibility issues with Indesign CS3 and Snow Leopard? My tech guy found nothing on this before we ordered the new system.

First things first. CS5 was announced today and preorders are being accepted.
I believe if you upgrade to CS4 you'll get a free copy of CS5. This is important because if you're upgrading a suite, tiered pricing makes CS3 to CS4 $200 less than waiting til CS5 comes out.
That out of the way, is everyone fully patched to CS3 5.0.4? Is Snow Leopard fully updated to 10.6.3? Do you have full read/write permission on the server?
Bob

Advice Needed - Escalating Legria HF20/HF200 Compatibility Issues

I have tried to alert Apple Australia of the compatibility issues between the Legria HF20/HF200 and iMovie 11 now that this camcorder has been added to the Apple PAL supported camcorders list for iLife 11. There has been many posts on this compatibility issue on this Forum.
They are arguing that because the list doesn’t specifically mention the term ‘Legria’ in front of the HF20/HF200 that there is no issue. I have tried unsuccessfully to explain that there is only one version of the PAL HF20/HF200 and that is the Legria HF20/HF200, and that therefore the list must be referring to this camcorder.
Unfortunately, they aren’t accepting this view. Therefore, could somebody please advise how I can escalate this further. My motivation for doing this is purely to assist other users.
PS: I hope that this post doesn’t get deleted like the previous much longer post that I drafted. I am doing this to help others. I am not trying to cause trouble.

I also have problems with my canon legria hfr 106, which is on the supported list.
I recently discovered that I can switch the camera settings so that it records in PF25. I don´t understand the actual difference between 50i and PF25, but I tested shooting in PF25, and when I import at full original size, there are no interlacing issues. That´s a good start : - )
I´m trying now to burn with the 1080p preset using toast (haven´t had the chance to look at the result yet).
I see in your post that you loose half the resolution if you apply scaling effects. What exactly does this mean? Is it for example if you use picture in picture, Ken Burns and other effects that change the size of the clip? Does the entire project loose half the resolution, or just the clip where the effect is applied? Im sorry if this is a newbie question, but I´m not very technical.

ILife 08 and iMovie 06 compatibility issues?

Sorry if any of this has already been covered in other threads...
Has anyone had a chance to thoroughly test the 6.04 version of iMovie (download version if you install iLife 08) and know what compatibility issues there are?
I.E. How well does iPhoto 08 play with iMovie 06, or iMovie 06 with iDVD 08. Are the third party plugins problematic with v6.04?
From what I saw at the Apple store, iPhoto08 and iDVD08 would be the only apps that I would really want since iMovie08 seems to be a step backwards and iWeb is still lacking in everything that I wanted improved. But I don't want to waste the money to discover all sorts of "gotchas" with trying to get iMovie06 to play nice with the rest of iLife08...
Also, has anyone done an install excluding iMovie08 entirely? Do you still need to download 6.04 if installed this way? Are there any pitfalls?
This is like Deja vu or something...When iLife06 first came out, I installed everything but iMovie and stuck with iMovie05 for a long time cause of all the bugs and how long it took to get the third party plugins working...

Of all the things for people to moan about with iMovie '08, the real unfortunate thing is it's inability to import effects, etc. (essentially your completed movie) from iMovie HD. One could somewhat forgive Apple for this debacle, if only it played nice with iMovie HD. Then it could be everything it's supporters say it is, i.e. "a different app," "a simple app for simpletons in a hurry" (although I find it's lack of tools and compatibility issues more difficult to manage).
...and a lot of us feel like this is the thing we're going to be stuck with going forward.
I keep thinking that something else is going to happen, because this can't be right. I think this diver/video engineer who came up with this concept is suffering from the bends.
Apple doesn't need the money, (as in making us buy Final Cut Pro for decent video editing), trust me, so I don't understand why it would take the PR hit.
iMovie '08 spoofs are already on YouTube, etc.
Message was edited by: rmig68

Compatibility issue between your power management system and Windows 8.1

I have purchased a new Lenovo Ideapad S410 and have this problem.
Compatibility issue between your power management system and Windows
It also gives a message "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll restart for you. (100% complete)
If you'd like to know more, you can search online later for this error:
VIDEO DXGKRNL FATAL ERROR
Please help! My laptop is only 5 days old.

What model do you have? Can you post your MTM or model name?
Sometimes these messages are a false alarm.

Boot Camp / Windows 8.1 64-bit / Driver compatibility issues

Hi everyone,
I have been struggling to install Windows 8.1 Pro 64-bit version through Boot Camp on my MacBook Air 13 inch mid-2012 for a few days and I have finally decided to give up and write this thread to see if anyone has encountered the same problems as I have and if they've found a solution.
What I've tried so far:
1. First attempt
     a. Download the ISO from Microsoft (We are a Microsoft Partner and have access to internal use licences of Windows 8.1).
     b. Use the Boot Camp utility to create a bootable USB drive, download the latest Boot Camp drivers and partition my SSD drive.
          Issue: Upon rebooting, I got the "No bootable device found" error message. I still tried to boot on the USB drive, which I was able to, but           when installing Windows, I was unable to format the partition created by the Boot Camp utility as it contained a "MBR partition table"           instead of a GPT.
2. Second attempt
     a. I searched the Internet about the error message about the MBR partition table.
     b. The solution I found was to format the partition created by the Boot Camp utility as "Free space".
     c. I was then able to start Windows installation by formatting the partition I wanted to allot it to through the Windows installation process.
          Issue: The installation went smoothly until my computer rebooted the first time and the "Peripherals preparation" step (sorry about the           approximate translation, I'm used to the French version of it) got stuck at 10% and was brutally followed by a black screen. Forcing the           computer to restart would show the Windows logo and go straight back to the black screen situation...
3. Third attempt
     a. I decided to create a bootable Windows installation USB drive using UNetBootin utility and creating a "Free space" partition through Disk      Utility on which to install Windows.
     b. I then booted on the USB Drive and was able to install Windows properly.
     c. I donwloaded the set of Boot Camp drivers through Apple's wesbsite corresponding to my MacBook Air model.
          Issue: Somehow, the graphics driver installed by Boot Camp made my system crash as I got a black screen when it tried to install. Even           without doing anything and having Windows try to install the right driver by itself, I got a black screen and an unusable installation of           Windows 8.1.
What am I missing here? Why isn't the Boot Camp utility working when it should be so easy? Is there a compatibility issue of my graphics driver (Intel HD Graphics 4000) with Windows running under Boot Camp?
Thanks in advance for your help. I'm in desperate need of a solution as I don't want to go back to using virtualisation softwares such as Parallels Desktop, VMWare, etc. though they work just fine...
Best regards,
Alex

1. Your MBA does not support EFI/Free Space method.
2. You need to ensure that your USB is a USB2 device.
3. The MBR should be checked, because there are known cases where BCA fails to create the MBR.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Why can't I use WebCT chat with my computer? I get the 'spiral of death' every time I try to type in my chat. I have a feeling it has to do with compatibility issues between Java and Tiger.

Hi Elizabeth,
Do your Mac meet any of these requirements?
http://www.wvnet.edu/services/webct/requirements.html
From this it appears to be PC only!???
http://sourceforge.net/projects/awebctcclient/files/Pancake%20%28it%20own%20proj ect%20now%29/Pancake%20Console%20V1.0.0/PancakeConsole-1.0.0-src.zip/download
Can you provide any more info on which bersion or file you have?
Can you tell us why you need this for your use?

I can't create PDFs from CS3 programs in Acrobat Pro XI. Compatibility issue or just Acrobat?

I was just upgraded to Acrobat Pro XI this morning. InDesign, Photoshop, and Illustrator don't seem to be supported file types for creating a PDF from Acrobat. While I usually create my PDFs from the authoring program, I occasionally need to make a lot of PDFs of different files at once, and making them from Acrobat makes sense instead of opening each individual file.
Is this just a compatibility issue? We have requested upgrades to CS6, but it will be a while before it gets approved (if it gets approved). Did someone think it was a brilliant idea not to allow PDFs from the CS products to be created from Acrobat instead of the authoring program?

Can you describe your workflow a little more? Are you saying that you created PDFs of InDesign documents using Acrobat directly -- not using InDesign?
If that was possible in CS3, I must have missed it.
FWIW, I can't select CS6 InDesign, Illustrator or Photoshop documents in Acrobat X. You can only select a handful of image formats, HTML or PostScript/EPS.

Major Issues with installing 4tb internal. Really need advice please

In the process of a long needed upgrade to my 2010 Mac Pro Quad core 2.8 and have run into a serious headache that I really need advice on so I can get back to work. I've already spent 2 days dealing with all of this...
Just did a new SSD install and Migration which went fine but I'm also updating the rest of the internal drives. My main (non boot) drive was being upgraded from a Seagate Barracuda 3tb to a 4th Deskstar NAS (it was showing as compatible with my desktop, see links below). My 3tb ran fine for years but now due to it being heavily used I want to switch to a new drive and I can also use a bit more space.
The issue I'm running into is that initially on boot, my system was telling me it couldn't recognize the disk and it wasn't even showing up in Disk Utility. I had to purchase a SATA USB 3 kit to attach it as an external to get it to show which worked without problem. With the USB kit I was then able to partition it (GUID, Mac OS extended journaled) and format it properly. After reinserting the drive into my tower as an internal it failed to show again. After a few attempts of restarts and trying various bays it popped up but showed as a non formatted drive and I was told again that the system didn't recognise it. I was then given the option to initialise and was then actually able to then format and partition it though Disk Utility while it was installed as an internal.
Figured that was problem solved but when I went to check the drive and getting ready to transfer files over I noticed that Disk Utility was only allowing the First Aid and Partition options but not Erase, RAID, Restore which I'd never seen before. I then also noticed that none of the drive connection info was in the same format nor will it even provide drive bay info, connection info or read/write status (See screen shots). This is what I can't figure out and really need to clarify before I put full trust into using this drive.
Any info would be greatly appreciated...
Deskstar 4tb internal info which is installed in Bay 2
3tb Seagate which I trying to retire and transfer from.
Here are the weblinks to the Deskstar 4tb drive and the compatibility list but I support isn't allowing me to add direct links so add the www. before hand.
(Drive - eshop.macsales.com/item/HGST/0S03664/) (compatibility list - eshop.macsales.com/Descriptions/specs/Framework.cfm?page=macpromid2010.html).

What OSX version?
Disk Utility in later versions of ML and I think Mavericks have problems formatting with 4 TB internal drives.
http://forums.macrumors.com/showthread.php?t=1661024
http://apple.stackexchange.com/questions/112266/why-doesnt-my-mac-pro-see-my-new -4tb-sata-drive

Neo2 865-ls compatibility issue - plz ASAP need advice

Similar Messages

Maybe you are looking for