Neo2 and X2: mostly success!

Hi all, for the past few days I've been running an X2 4200+ in my new Neo2 Platinum, with almost no issues. With the Zalman 7000AlCu running at 50% in Speedfan, my temps are about 42C idle, 48C load.
When I first got the board, it had bios 1.5 which didn't recognize the 2nd core, so one of the first things I did was flash it to 1.A3mod. The interesting thing is, CnQ WAS working at first! I saw my cpu going from 1GHz/1.1v to 2.2GHz/1.35v. It was definitely working and completely stable, and my idle temps were about 5C lower than now. Unfortunately, while debugging another issue, I set CnQ to disable in the bios. Now, it doesn't work anymore. :( I tried changing the bios setting back to AUTO, re-installing the CPU driver from AMD and I'm set to minimal power management, but for some reason I can't enable CnQ anymore. I wonder if the 1.5 bios had CnQ defaulted to on, so that setting stuck after I flashed, but once I hit disable in 1.A3 that setting stuck for good. I won't risk flashing back to 1.5 to test my theory though. I just hope MSI gets this fixed soon, or someone figures out how to mod CnQ support back in.
I was experiencing very strange HD benchmarks (sometimes way too high, sometimes way too low), until I added the "/usepmtimer" option to boot.ini. This was supposed to be done by the AMD CPU driver install, but for some reason it didn't for me.
Also, the bios (and speedfan) are reporting that my Vcore is about 0.04-0.05v too low. It should be 1.35v but often runs 1.30-1.31v. I wonder if this isn't just an inaccurate sensor reading, because my system is 100% stable in everything I've thrown at it. My 12v line is actually reading too high 12.3-12.6v), so I may look at replacing my PSU. Everything is working great for now though, I'm afraid to mess it up.

Quote from: jettoblack on 17-August-05, 17:17:55
Also, the bios (and speedfan) are reporting that my Vcore is about 0.04-0.05v too low. It should be 1.35v but often runs 1.30-1.31v. I wonder if this isn't just an inaccurate sensor reading, because my system is 100% stable in everything I've thrown at it. My 12v line is actually reading too high 12.3-12.6v), so I may look at replacing my PSU. Everything is working great for now though, I'm afraid to mess it up.
Listen to SAB and realize that the software voltage readings are not accurate. The "high" reading on your 12 volt line most likely means, if your power supply is good, that your system reads 12 volts as 12.45 +/- 0.15 volt. I have had MSI (and other) motherboards that show 12 volts as low as 11.4 and as high as 12.58. Switching out the psu on the basis of those readings gave almost exactly the same readings with the new psu, so I realized that it was just the motherboard/software.

Similar Messages

(MacBook 2014 model) most of keybord stopped working can't login. Restarted, screen started flashing bootup was slow and but no success. Tried safe boot but still no effect. Any suggestions please!! Urgentw

(MacBook 2014 model) most of keybord stopped working can't login. Restarted, screen started flashing bootup was slow and but no success. Tried safe boot but still no effect. Any suggestions please!! Urgentw

Try SMC and NVRAM resets:
https://support.apple.com/en-us/HT201295
https://support.apple.com/en-us/HT204063
Then try the safe boot again:
https://support.apple.com/en-us/HT201262
If no success, make an appointment at an Apple store genius bar for a FREE evaluation.
Ciao.

The "Most Successful Product Launch in History!"

"Apple today announced that it has sold over 1.7 million of its iPhone 4 through Saturday, June 26, just three days after its launch on June 24. The new iPhone 4 features FaceTime, which makes video calling as easy as one tap, and Apple's new Retina display, the highest resolution display ever built into a phone, resulting in stunning text, images and video.
"This is the most successful product launch in Apple's history," said Steve Jobs, Apple's CEO. "Even so, we apologize to those customers who were turned away because we did not have enough supply."
....do i need to say more?

angelofsins21 wrote:
"Apple today announced that it has sold over 1.7 million of its iPhone 4 through Saturday, June 26, just three days after its launch on June 24. The new iPhone 4 features FaceTime, which makes video calling as easy as one tap, and Apple's new Retina display, the highest resolution display ever built into a phone, resulting in stunning text, images and video.
"This is the most successful product launch in Apple's history," said Steve Jobs, Apple's CEO. "Even so, we apologize to those customers who were turned away because we did not have enough supply."
....do i need to say more?
Imagine the numbers if all of BestBuy's pre-orders had been fullfilled!

My girlfriend gave me a $25 iTunes gift card for Christmas, so I switched to the Canada store and spend most of it with .02¢ remaining. *Now I want to switch back to my original store, but I can't.

My friend gave me a $25 iTunes gift card for Christmas, so I switched to the US store and spend most of it with 11¢ remaining. *Now I want to switch back to my original store, but I can't. iTunes keeps saying "You have a store credit balance; you must spend your balance before you can change stores.*

You might just have to contact Apple and ask them to remove it (losing it). Usually people clear a balance by buying one song and having the exact remainder charged to their credit card, but if you don't have a US credit card you cannot do that.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

My iPhone 4 will not sync my new voice memos from the "Voice Memos" app to my computer. This is frustrating, should not be so hard, can someone please help. I use PC with windows 7 with iPhone version 6.1.3 and iTunes most recent. Thanks.

In the Music tab of iTunes, do you have 'Include Voice Memos' checked?

Syncronization: How can i store mail for different accounts remotely, and copy most important mails manually to local folders on two devices?

Hello. I have two devices and two accounts, so what i want is this:
I only want to store mail from both accounts in a remote place and copy most important mails to local folders.
(I will be grateful for any ideas as to where/how this "cloud" can be - specially free places)
* Can I have a copy of these local folders in both devices and the remote storage?
* Could i synchronize devices so that: when i move a mail to a local folder in any device, its copied to the same folders in
the other device and the remote storage place?
* The remote storage place will have many other folders. When I open Thunderbird, I also want to see these and the mail
inside, and also be able to move mail from the inbox to these folders.
* One of the accounts is gmail. In Account Setting tool, there is an option for synchronization. If there is no easier way, I can have mail for other account copied to gmail, and just syncronize gmail mail. For this, how will I copy my present folder structure to gmail. And how can I syncronize the local folders on the two devices?
Thanks in advance.

The first awkwardness I see is that there's no obvious format in which to store messages remotely such that you can work with them in an email client. It may be possible to set the "Local Directory" option in the account in Thunderbird to point at some remote folder (DropBox comes to mind) but I have never tried this and I'd be nervous about what happens if connection can't be made, or if you happened to access it from two different places simultaneously. The other concern is that mail stores get big, quickly, and you'd be forever uploading and downloading large (multi gigabyte) files. Thunderbird stores what looks like a folder containing many separate messages as one big file, so there's no simple opportunity for incremental changes to be up/down loaded.
The whole idea of Local Folders in Thunderbird is to detach messages from servers, so they don't track what happens on servers. I say this to point out the distinction between files stored locally and permanently ("Local Folders"), versus cached copies of online files ("synchronized"). It's not safe to regard your synchronized folders as permanent.
So, synchronized folders on an IMAP server are "mirrored" in Thunderbird so you do have a local (albeit temporary and transient) copy of messages; this is done mainly to avoid repeatedly downloading messages if you re-read them, and it makes searching faster an more efficient. But these "synchronized" message track what's being done on the server, and so if they are deleted anywhere, all synchronized devices will at some point also see the deleted messages vanishing. (Unless you made a local copy in the Local Folders account.)
I use a gmail account pretty much as you have described; I copy or move messages to that account so they are visible in my phone, my tablet, my own laptop and my works computer. It's free, and it's "in the cloud"; the only reservation I have is its privacy. There are other providers (e.g. 1&1/gmx) who don't seem to have the data collection fetish that google thrives on.
It's fairly simple to create filters in Thunderbird to automatically copy messages to your "cloud account"; even better is to set up forwarding rules on the other accounts' servers, so your messages are automatically sent on and waiting for you when you next login, already in the cloud account.

I purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be

i purchased 2 books for my iPad and they downloaded successfully. They show up in iTunes when my iPad is connected to my Mac but do not show up on the Mac. Is this a synch issue? When I click the Synch box I am warned that downloads on my iPad will be erased. Is that true? My ultimate goad is to be able to read the books on my iPhone as well. Thanks.

You should be able to copy them to your computer's iTunes via File > Transfer Purchases and you can then sync them to the iPhone (or you could re-download them directly on the iPhone)

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

I had over 200 e-mails. I went to my webmail and deleted most of them. However, my iPhone still shows 200 e-mails. How can I force my iPhone to update from the e-mail server? Or will I have to delete each e-mail from my iPhone as well? Thanks.

You may have to try deleting all the music from your phone (by going to Settings>General>Usage>Music, swipping All Music and tapping Delete), then sync it all back on with iTunes in order to fix this.

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

I'm going to guess videos buffer for a while also...
Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
To close apps: Double click home button, swipe up to close the apps.
To solve internet problem, contact your provider. Basic internet is not enough for video games and movies. Your router may be old and slow.

I did everything lllaass suggested and removed most of the itunes related components, but when I tried to remove itunes, I got the message, "The feature you are trying to use is on a network resource that is unavailable" so I was not able to uninstall it.

I did everything lllaass suggested and removed most of the itunes related components, but when I tried to remove itunes, I got the message, "The feature you are trying to use is on a network resource that is unavailable" so I was not able to uninstall it.

(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

New 13" Macbook Pro trying to connect to a Panasonic VIERA TC-L42U30 as second monitor. I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. The Macbook does not sense the second monitor (TV). Help?!

I've been a Mac since 2008, so I know my way around the system pretty well. This issue, however, has me stumped. I had an iMac until now and only now am I experiencing some difficulty with my new MacBook Pro. The model I have is the newest 13" Macbook Pro model and I'm trying to connect a Panasonic VIERA TC-L42U30 42" HDTV as a second monitor via the Thunderbolt port.
It worked the first two times and hasn't worked since, after 10-15 attempts with different configurations, turning things on n off, restarting the mac, unplugging the cables, adapters, TV, resetting the P RAM, etc... I've used multiple hdmi-thunderbolt/mini displayport adapters and multiple hdmi cables and still no success. No matter what I do, the Macbook does not sense the TV as a second monitor anymore.
I took the MacBook Pro to the Apple Store, and their "genius" there had it working fine with a DVI connection to a regular monitor. The Panasonic TV I have has HDMI connections and one VGA connection which does not support HD, but no DVI option. I want an HD connection to mirror or extend my MacBook Pro screen. At the Apple Store, they didn't have a Thunderbolt/Mini DisplayPort to HDMI adapter, so he could not try that out for me.
Anyone else have this configuration or another similar one with a Panasonic HDTV?
Ideas? Suggestions? Anything?! Help!!
P.S. I'm running Mountain Lion, if that wasn't already obvious. Everything is up to date in my App Store as well.
Thanks!

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Unistall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??

I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.

I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!

I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so slow that I wind up having to crash and restart most of the time. This is true regardless of the app I am using at the time. The specs of th

I have no idea whether there is a causal relationship but since moving to Lion and iCloud, my iMac has become so unresponsive that I wind up having to crash and restart most of the time. This is true regardless of the app I am using at the time.
The specs of this iMac are:
iMac 27 inch, late 2009 model with a 3.0 GHz Intel Core 2 Duo with 4 Gig 1067 Mhz DDR3, using OSX Lion 10.7.4 (11E53)
I have Mackeeper installed and according to the scans I have run, everything is fine. No virus, no junk files . . . no problems at all . . .
Except that for all practical purposes, my computer isn't working.
I am nearly totally deaf and live in an isolated, rural area of NW Missouri and this computer is what I mainly rely on to contact friends, relatives and business associtates!
Any and all suggestions will be greatly appreciated!

First, back up all data immediately, as your boot drive may be failing.
If you have more than ten or so files or folders on your Desktop, move them, temporarily at least, somewhere else in your home folder.
If iCloud is enabled, disable it.
Disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable. Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone

hi, l authorized my computer using iTunes and it said successful, but when l start syncing my applications l get this error: "The iPhone "My name" could not be synced because this computer is no longer authorized for purchased items that are on this phone".
May you help
Thanks

Try TS1389: iTunes repeatedly prompts to authorize computer to play iTunes Store purchases.
tt2

Neo2 and X2: mostly success!

Similar Messages

Maybe you are looking for