Neo2-FISR new bios wont post

I just upgraded my bios to the "more stable" bios downloaded via MSI live update 3.0 Now my system will not even post!
my system is
intel p4 3.2 800fsb
Kingston hyperX 2x512
420w PS 12v=13a 5v=32a 3v=26a
video card Geforce FX 5200 Ultra
Hard drive = WD Raptor 40 gig
I have been reading about problems with the MSI boards and graphic cards could this possibly be my issue. The system worked fin eunder the older bios.. not sure what version.

Quote
Originally posted by POTI
.. and BTW I wont be loading the live destruction utility next time.
P
sorry , I'm sure it's very harrowing for you to lose your mobo like that , but that is a bit OTT!!!

Similar Messages

1.8 bios wont POST, what can I do?

Well... it seems to me that the beta 1.81 bios is more stable than their final release. Now I don't know what to do. My computer wont POST. It just beeps continally until I turn it off. There are no patterns, its just one beep after another with about 1-2 seconds between beeps. Can anyone help?

Hi Guys n Dolls
heres another prob ive found with bios 1.8
after a successful flash in windows and reboot everything seams OK cept for a worrying message ... Checking NVRAM .. NO NVRAM
the new bios stole my NVRAM so now im scared to turn puter off in case it wont boot again .. lol
anyone else got this .. if so did your pc turn off and on again .. geeeeee what a nightmare
EDIT : well i got brave and switched pc off ... thankfully it restarted .. so not sure why it stole my NVRAM .. lol

K8N Neo2 Platinum 939 -new bios

Hey,
I wonder if there is any newer bios then the one on the homepage (msi) some beti bios or so for the K8N Neo2 Platinum 939 mobo ? If so please post link as well, thanx!

There is a beta bios floating around here 1.25 i think, i tried it but Cpuz didnt work properly afterwards

New BIOS Posted

Hey All W100 and 105 owners...Toshiba US has posted a new BIOS. It has some major changes. I installed the night, so far so good...
Version 1.30 - 2011-01-26
•Improved Battery Management.
•Improved Deploy Center 5.5 recovery speed.
•Added support for the McAfee Endpoint Encryption eToken.
•Added support for the Paragon Backup & Recovery Suite.
•Implemented the INTEL specification for the Intel 5 Series Chipset to improve stability.
•Implemented the INTEL specification for the Intel Pentium U5400 Mobile Processor Series to improve stability.

I installed this yesterday and it looks like this may have helped the battery run-down problem when the PC is switched-off or hibernated. After leaving it overnight I still have 98% battery left, this seems to be a major improvement but will need to leave it for a few more days to make sure.

X58 pro mobo M flash wont pick up new bios

Hi all, i am trying to flash my boards bios with the latest bios, but for some reason M flash wont pick up the new bios. I have extracted it to the root directory of my flash, and a seperate folder as well and M flash wont pick up the bios file or the seperate folder, please advice.

Quote
hoping a bios update would maybe improve speed
Well, usually a different BIOS has no big impact on system performance.
Anyway, if you ever decide to switch to a v8.x BIOS, there are basically two options:
1) Fool the M-Flash File Scan by simply renaming the desired v8.x BIOS File to A7522IMS.7x0 (x=any number you like).
- or -
2) >>Use the MSI HQ Forum USB flasher<<
In any case, I'd suggest to use option #2, however, if it is not really necessary to update the BIOS, you may as well leave it alone.

Z68A-GD80 Wont post with new GPU.

I have two working Asus 7970 Matrix cards that my PC wont post with them in. All power connectors plugged in, tried two different PSU's a Corsair HX850 and a Corsair AX1200i. Tried both PCI-E slots on the motherboard with both cards.
The cards work in a second PC however, so it seems like its the motherboard.
No display signal, no beeps, no post.
Also, the system posts and works fine with a GTX 590 instead of the Asus 7970, and Sapphire's 7970 works fine as well.
i7-2600k
MSI Z68A-GD80
Corsair AX1200i / Corsair HX850
Asus 7970 Matrix
Corsair Dominator Platinum 4x4gb 1866

Hello Svet, even it has been posted more than one year ago. I experienced the same problem with a HD 7950.
I just want to say : Yes it works finally BUT where did you find this Bios ???
I use the global website and this version is simply missing !!!*
The first thing I did while seeing that I didn't have no video signal and no boot is to upgrade the bios but I only find the .H5 or the bios for Ivy.
Anyway I have a mixed feeling, quiet happy and yes ... thank you for your help now it seems working fine.
But on the other hand ...what a pity from MSI to have a so bad listing of their bios.
Once again thanks

New rig 990fxa-gd80v2 wont post debug code 19

I am building a new rig for my gf's brother and i can not get my new mobo to post. I am getting debug code 19. I couldn't find a lot of info on what the code means but from what I have seen its apparently a problem with the BIOS not being updated for my new CPU. I have tried all of my current working components from my rig on the board as well and it still showed code 19. Here are the specs on the rig.
MOBO 990fxa-gd80v2
CPU AMD FX-8320
PSU 500W RAIDMAX
GPU EVGA GeForce GTX 560 Ti (Fermi) 1GB
RAM G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600
Like I said however I took apart my rig completely and switch all my known working parts onto the new MOBO and got the same error code. So I am not sure if the issue is really an outdated BIOS because it wouldnt post with my AMD Phenom II X6 1100T Black Edition. Any help would be greatly appreciated.

ok so it has been a few days since I last posted because I have been busy but I just finally had time to work on it. I essentially took out my mobo and replaced it with the new one that had been posting code 19. Using all my known working components from my computer including my PCU I am still recieving the same error code, even after moving my known working RAM into each different slot.I'm getting quite desperate here now and just am plain lost in trying to understand what seems to be the issue. I'd be very grateful for anyadditional information/tips here. Thanks.

New Bios for 865PE Neo2 FISR2

Does anyone have any idea when a new BIOS version might come out for the 865PE boards might come out? I'm wondering because I was hoping one might come out to fix the problems they are having with OCZ and other ram's with manual cnofigurations and overclocking
Thanks
Trevor

I think it would do MSI better if they better organize their "tweak options" so people can understand what's going on and NOT end up surprised.
E.g. as observed by PeteJ61 in with memory timing = by SPD and DRAM Freq = Auto
[ http://www.msi.com.tw/program/e_service/forum/index.php?threadid=24347&boardid=10&styleid=1 ]
SLOW = no PAT/MAT + standard memory SPD settings + standard FSB + standard AGP/PCI
FAST = PAT/MAT + fast memory timing + overclocked FSB overclocked AGP/PCI
TURBO = PAT/MAT + fastER memory timing + overclocked FSB + overclocked AGP/PCI
ULTRA = PAT/MAT + fastEST memory timing + overclocked FSB + overclocked AGP/PCI
standard AGP/PCI = 66/33 MHz vs overclocked AGP/PCI = 70/35 MHz
on "C" rev P4's, standard FSB = 200MHz vs overclocked FSB = 210 MHz
So if you want to be able to individually control them:
1. To control PAT/MAT, select SLOW vs FAST
2. To control memory timing, select anything other than Auto in DDR timing
My main problem is that Neo BIOS 1.6 (and probably Neo2 also) does NOT allow selection of standard AGP/PCI clock once I move up the FSB - bummer :( . For this, I use a windows utility named ClockGen to fine tune down to reasonable levels.
Would there be a valid reason why MSI just didn't select fixed ratios rather than all this "fine tuning"?

K8N NEO2 shut down/wont post

Long story short. I cleaned my case, put it back together. System ran for a few minutes then shut down. It did that a few times then all it would do was turn on for a few seconds. Now it wont post at all. Any ideas? Thanks. SIK.

put components out one by one until it posts
also try to swap memory/power supply/ cpu and see if it post again
I know it is a long and hard process but it is the most effective way of solving the problem.

New 955X Platinum and new BIOS relase for 915P Neo2 Platinum

Hi all,
Just wanted to bring some news to this forum so that not all topics are trouble related:-))
Hope it's ok with the moderators....
MSI has just relased their new 955X Platinum mobo, and I must say it looks great.
It has some special features like 9.1! Dolby sorround and E-SATA brackets for external S-ATA's. It fully support all the Intel? Dual Core processors such as the 820, 830 and 840 families and the highest Pentium 4 Extreme Edition series processors like P4EE 840.
Best of all, it delivers power to the cpu finally tru a 4.phase voltage regulator, so I hope this board OC better then its predecessors.
Sinse this is a Platinum board, I hope MSI havent skiped the 955X DIamond board they showed at CeBit2005 tough.
Anyway, look out for this board and you can read the press release here.
I know some of you 915P PLatinum owners have had som troubles with youre boards, I just want to inform you that MSI hase just released a new BIOS(1.7) to youre board. You can dowlad it here.
Well, thats all. Have a nice weekend everybody:biggthumbsup:

I know, but I,m hoping the 955X mDiamond will support SLI. nVidea has just revealed that they will support SLI on Intel chipsets.

NEW BIOS version for Satellite A200 PSAEC!

They've posted new Bios updates on the download page!
5.20-WIN : This Bios is NOT compatible for Notebooks with Windows Vista!!!
1.80-WIN : This Bios is ONLY compatible for Notebooks with Windows Vista!!!
But I don't really know how to use this. Because I have currently XP installed. Let's assume I update the bios with the XP version. What if I decide later to put back the Vista? That would be impossible, because I have BIOS for XP. And couldn't install the Vista BIOS neither, as i have XP installed...
Any ideas?

Hi,
its not so tragically if you have a XP bios and vista installed. It will work but with many limitations and it wont work stable, so its better to have the version which is intended for the operating system you currently use.
Thanks for posting this news, I assume that many uses with that machine appreciate some good news. :)
Greets

Please help 790GX G65 wont POST

Hi MSI community,
I have a brand new 790GX-G65 as part of my all new build and it wont POST.
here's the system
790GX-G65 - winki edition (winki not connected)
Phennom X4 965 Black (AM3 package, 3.4GHz)
Corsair 400W PSU
2*2GB Corsair Dominator DDR3 - p/n cmd4gx3m2b1600c8 , which according to the reseller's website is guaranteed to support all DDR3 platforms from AMD
using the onboard ATI RADEON 3300 via the vga socket
I have the board outside the chassis on a peice of cardboard
the 24 pin connector, 4pin connector, heatsink fan, CPU, ram, keyboard(tried PS2 and USB ones) and monitor are the only things connected.
I have tried using each ram stick individually in slot1, both together in slots 1 and 2 and no ram at all.
In each case when i start the system the fans come on, the reset and power buttons light up, the five blue LEDs in the top right corner come on NB1,LED2,LED3,LED4 first then LED1 a second or so later, but nothing else happens.
no beep codes(have tried with and without the system speaker connected), no signal to the monitor (tried several monitors)
I've tried clearing the CMOS several times.
it seems to me like its a dead chip or board but i cant truly rule out ram.
anyone have any thoughts or suggestions?
I will ask around to see if i can find another AM3 chip or board to test against but most of my friends went the intel route
many thanks

Hi Guys,
Thankyou all for replying, sadly though it still doesn't work :(
nt650
I could understand the psu struggling if i had load of othe things running off it, but it's just the board and chip.
I'm happy that its not the board shorting out on the cardboard.
I've tried it with a couple of old ATI rage IIs I had lying around and theres no joy from either of those. both known to work in other pcs
I'm using the standard AMD HSF so the clip on that shouldn't have caused a problem. I didn't need a hammer to fit it!
HDD is not connected
CMOS battery seems fine
paperclip test was fine, fan spun up immediately
Fredrik
I cant be sure what bios version i have, its a brand new board and i havn't flashed it so whatever it shipped with, v1.4 I guess. Are there any known issues?
Bas
I checked the pins again, all there and straight.
Hans
I'll try and lay my hands on a beefier PSU tomorrow, but with just chip and board it should run ok. I know it's near the bottom end of the recommended range but the PSU companies will always want to sell you more than you need.
One other thing I tried just for kicks was to start the board without the chip in at all,
the hsf still came on, the speaker still did nothing but only LED1 LED2 LED3 and LED4 came on, not NB1. I have no idea what (if anything) that means, but hopefullly someone on here does.
Anymore ideas out there? They would be gratefully received

MSI DKA790GX wont POST |SPLIT

msi DKA790GX
PHENOM 11 X4 940BE
OCZ FATALITY 800MHZ 8GB
EVGA GTX 285
ANTEC 650 WATTS
2X WD 320GB RAID 0
I am having almost the same issue but if i turn the switch of to power supply then press the power switch on mainboard it will boot
if i try to restart from windows it will not post if i try to turn power on with switch on case (antec 900) lights come on alot of sound but will not post, unless i use switch on motherboard it will not post at first it was random but its getting worse i tried the new bios 1.9 no luck
it works great other than i have to use power switch on motherboard for boot up
temps are normal, i have reseat the cpu, memory power cables nothing ran tests after test it all seems fine but it wont post with windows restart or power switch on tower

Since both problems and fixing has to do with the power supply unit (PSU), I would check power connections. Perhaps try with another PSU, but it sounds like if some devices share the wrong power line. Antec PSUs usually come with a manual, have a look there for good distribution of the cables/connections.
Could also be traces - metal debris - in the motherboard, that creates power "jumping".

So, has anyone had better luck with the kt4 ultra's new bios?

ive seen so many posts on here about probs with the board (mines memory related) wondering if anyone has any positive notes on the new bios, or if they are still having problems... i had to box mine back up and install the trusty old FIC board, cause i COULD NOT get the msi to work. VERY frustrating to have what seems like a great piece of hardware boxed up for bios/other issues. do the msi engineers read this board?????? come on guys.....

the p/n is pp-303XP
thats funny cause my system is working fine now on an older mobo. ive seen many people with similar problems (see the "MSI and a total lack of support" thread) and i really dont think its the power supply. i will reiterate:
the system runs fine with only 256 megs installed (pc2400) as soon as i plug in the other stick, wallah, nothing. your saying that the 3.8 volts or whatever it is that the stick of memory consumes, prevents the computer from starting up or even posting? i seriously dont think so. ive even tried all different hardware configs (took the ati card out and replaced it with an old TNT card) and it still wont work.
i dont need to get a bigger power supply.
MSI needs to provide better support, and get off their %$#%$ and at least get a stable bios out. from the looks of the forum, these boards are totally $%^&&.

MSI 785GTM-E45 wont post with 4 GB ram just about at witts end help please

I have a MSI 785GTM-E45 with a AMD Athlon 7750 Black Edition Dual Core 2.7 (all overclocking was restored to normal for install of new ram) that ive been putting together its just about done except vid card and memory.. K heres my problem I"ve been using a 1 X 1gb single channel ddr2 800 pc2 -5300 1.8v 240 pin to set stuff up untill i got my new ram. well i got my new ram today its 2 sticks 2 GB each PC2-8500 DDR2-1066Mhz ..CL 5-7-7-25 dimm when I install it on my board the machine wont post. seems like it boots theres no beeps or anything so i cleared the CMOS Flashed and upgraded the bios set bios to defaults still wont post. I tried one stick then other tried one slot then other nothing took it out put in my old ram fires right up. HELP what am i doing wrong. PC2-8500 DDR2-1066Mhz owners manual and everything i read online says this should work they are a new maching pair.

hey mark thanks i took it to a shop today guy said it was 100% compatible so i asked him to test it came back bout 5 min later said it was completely dead worthless so in sendin it back bout some from the guy at the store machine runs awsome now i just need a good inexpensinve graphics pci-e pretty sad when you spend good Money and a few days looking for excactly what you want / need and when you get it its trash im just glad it wasnt my main board

Neo2-FISR new bios wont post

Similar Messages

Maybe you are looking for