Neo2 Platnium can't not install OS in Raid 0 ; agp frequency 66 or 67 ?

1. just bought a neo2 plat. to replace my old k7n2 delta ilsr motherboard, plug 2 Raptor in sata3 & 4,
set NV raid, stripe, 64k, add 2 hard drive in,
 boot from xp disk, press F6, S, insert flopy disk, press Enter, choose NV Raid, press S again, choose NV storage..,
Enter, then black screen, tried over 10 times, still same thing, Enabled everything about sata 3&4 in BIOS,
i did try install the OS in single hard drive, and everything works fine,(everything was pull out from my old system)
2. when overclocking, the AGP frequency should be set 66 or 67?
3. how to set Ram & fsp ratio in Bios
 please help me out, thanks in advance!
Venice 3000+  AC Freezer 64
K8n neo2 plat. 0503
2* Raptor 74g
g.skill 2*512 tccd LC
galaxy 6800GU
Tt butterfly 480w

Make sure both drives are wiped clean for foreign data/raid whatever .
I had simular problems with one disk , it had "old" leftover raid data stored on it .
OS install crashed .
Had to wipe the problem drive clean first connected as a single drive by creatings single partition and format it , then placed it in raid and create array .
And OS install with create partition and format went okay after that.
And don't forget to use the (B) to set them as bootable in the raidbios before exiting .
Another approach is to set them up at sata port 1/2 , install OS , make everything
of drivers and os settings finished .
Then move the raid disks to sata 3/4 .

Similar Messages

  • Why can I not install Acrobat Reader in a different drive / directory

    why can I not install Acrobat Reader in a different drive / directory. I need to install this in a different drive. I prefer to keep the Os drive free of rubbish. Is there an option in an install to allow this to happen?

    What is your operating system & version?
    If you are on Windows, download the offline installer from http://get.adobe.com/reader/enterprise/ and click 'Change Destination Folder' and the first install panel.
    [topic moved to Adobe Reader forum]

  • Why can i not install it mavericks

    why can i not install it mavericks i have downloaded it but it is not letting me install it on to my micintosh HD.

    Choose About this Mac from the Apple menu, click on More Info, and check the model identifier against the following, which are the earliest Macs of each type that can run Mountain Lion and Mavericks:
    iMac7,1
    MacBook5,1
    MacBookPro3,1
    MacBookAir2,1
    Macmini3,1
    MacPro3,1
    Xserve3,1
    (92913)

  • Crystal Reports XI R2 SP6 can be not installed?

    I download SP6 via https://websmp230.sap-ag.de/sap%28bD1lbiZjPTAwMQ==%29/bc/bsp/spn/bobj_download/main.htm.
    But  Crystal Reports XI R2  SP6 can be not installed.
    It prompt message:
    Crystal Reports Service Pack 6 is for Crystal Reports XI R2 only, and can not be installed on top of other Business Object XI R2 products.
    I check my Crystal Report developer, and its version is Crystal Reports XI Release 2 sp3.
    Who do anyone know?
    Thanks.

    Hi
    I would recommend to open a case by SAP support (http://service.sap.com/support) about this.
    Regards,
    Stratos

  • Dear Apple why after restoring my 3GS can I not install older versions of apps automatically

    Dear Apple why after restoring my 3GS can I not install older versions of apps automatically?

    Jeff,
    Sorry for the delayed response.
    I'm running Windows 7; 64-bit.
    Version:
    2.0.4000.0
    I'll keep trying.
    -JJ

  • Bios not install error and Raid Configuration not showing physcial HDD in Lenovo

    Is this a SATA hard drive by any chance?  Sounds like you have an Adaptec SCSI controller, but no hard drive attached to it.  Are you booting an install DVD of some sort?

    Bios not install error and Raid Configuration not showing physcial HDD in Lenovo RD 120 Server (New)
    updated bios still same error
    and at array configuration it is not showing any hard disk
    hard disk utility it is showing hard disk 
    we are trying to install OS with single hard disk in Lenovo RD 120 Server
    This topic first appeared in the Spiceworks Community

  • Can I not install Final Cut Studio 2 on my new Mac Mini?

    I just purchased a new Mac Mini - it's time to retire my G5 Power Mac.
    FCS 2.0 is unverisal - so why can I not loan the software..???

    I am having a major problem, I have an old mac purchased 7 years ago and my hard drive got problems but is still working, I got a new mac having OS X system, I have final cut pro 6 and I installed it on the new os X but it didn't work, I also used the conversion method mentioned on the net in order to work on final cut pro x because final cut pro 6 is not supported on OS X, with the conversion the final cut pro X was only able to read the original tapes but was not able to read the edited material, am really stuck and I need help, can someone recommend a helpful solution? when i went to mac technical support office they said that for old macs we can only offer to change the hard drive and RAM and replacing the old hard drive for OS with a new hard drive does not gaurantee that final cut pro 6 will work also, and if something later on doesn't work in the old mac OS we can not fix it or replace it because apple does not provide any other spare parts besides the RAM and hard drive.

  • Why can I not install updates or upgrade to 8?

    When I try to install updates, all I get is "Connecting to the update server" And when I "download" version 8, and then go to open firefox again, it is still version 7...

    Hi crazytwin123-
    There can be a number of reasons why the updates are not installing correctly. Here is a link to an article describing how you might fix the problem:
    [[Software Update Failed]]
    Hope that helps!

  • Why can I not install adobe flash, I get a message saying it will not install while firefox is runing

    When I try to download adobe flash player everything goes fine and the download finishes. When asked to install I get a message that says it will not install while an application is running. Which is Mozilla Firefox

    Adobe Shockwave Flash needs to install plugins for Firefox, and Flash needs to do that with Firefox closed. So close Firefox and run the Flash installer.

  • Why can i NOT INSTALL latest version of itunes

    I cannot update itunes, it just will not install, my iupdad is freezing --- APPLE WHAT ARE YOU DOING, WE BUY THESE ITEMS AND YOU THEN BLOCK US EVERY WAY WE TRY, I AM SO SICK OF BEING USED

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Why can I not install Adobe Flash Player on my Samsung III phone!?!? Are you kidding me!?

    .Why can I not load Adoble Flash Player onto my Samsung III phone !?!?Are you kidding me!? Or am I doing something wrong?

    Hi, I don't know. It is not too helpful to only know that you have a computer.
    eidnolb

  • Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

    Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
    I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
    I tried those solutions for my trash and that helped after some trying.
    However, I still have the problem with copying and moving files.
    I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
    Who can help me??
    Cannot seem to find any info on it on the support-forums or elsewhere.
    My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
    Any help would be greatly appreciated...
    Otto

    Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
    - make sure you have at least 10% of your harddisk in free space (I had only 5%).
    - do a PRAM-reset (http://support.apple.com/kb/ht1379)
    - perform a hardware test (http://support.apple.com/kb/HT1509)
    - make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
    - after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
    So far I only cleared up some space on my HD, and already the problem occurs less.
    Still, I will go through the other tips too.
    (will post progress)

  • Why can I not install fonts? Office for Mac will not recognize them?

    My wife and I tried many times to install several fonts that we could use in Microsoft Office for Mac. Even though it said they were installed in the Mac, we could not see them in Word. We are new to the Apple products. We are not novice computer users, just novice Mac users. The font book shows them installed. We tried to choose several of the font families to add the fonts to. We could not see them there either. My wife does some foreign correspondence and likes to use pretty script fonts (TTF). Please help if you can.
    THANKS IN ADVANCE
    Billy

    Sorry also not.
    I signed in to the App Store (and to itunes store just to make sure) with both my apple ids but i do not have the sub- section 'Hidden Purchases' within 'Itunes in the cloud' section. I guess I do not have hidden purchases then...
    More interestingly: I checked the 'Top Charts' section in the AppStore and under category 'Top Free' all the iWork stuff (Numbers, Keynote, pages etc) shows up! But it has a price (e.g. numbers = 2000Yen) underneath... very strange.
    Somewhat the app store knows that it should be free for me but the price is not displayed as 'Free'...
    Help please.

  • Why can I not install safari

    What has happened to safari? Macbook pro 10.10.  After installing antivirus, I can only get and use firefox. 

    I use DiskWarrior, Drive Genius, Onyx, Cocktail and BatChmod and have for years and while most if not all of what they do can be done from the terminal these save time and give me an interface thats easier for me to work with. These are some of the many legitimate Mac utilities but not the only ones. There are really just a handful of bad ones, MacKeeper happens to be the most controversial of them and on these forms I have not seen anyone defending it, but I have read supposed experts who claim it's legit on Mac websites from time to time. 
    and a fool is someone who takes nothing from the experience.

  • Why can I not install Presenter v.9

    Downloaded and installed eLearning suite 6.1. All components appear to have installed correctly, with the exception of Presenter v.9.
    The install GUI indicates that there is a previous version installed.
    However having swept drive, and checked for hidden apps and files, I can find no reference to this, or previous versions.
    We were hoping to run tests for comparison - various types of presentation software. Key to designing and recomending to our future users. However with this perceived issue and time runnig out. we may have to ignore this product.
    Is there a downloadable Adobe Product that can tidy up or prep. for uninstall / install scenarios?
    All help gratefully received.

    Hello,
    I am Mukul from Adobe Presenter Engg. team.
    I can see from your post that you need to get started on Presenter on urgent basis.
    Can we schedule an online meeting, connect to your machine using Connect meeting and check the issue.
    That way we can try to resolve your issue at the earliest.
    Quick tip - Please check if you have older version of eLearning Suite installed. If yes, please uninstall it and then try installing Presenter.
    If above tip is not useful, please let us know your comfortable time and timezone. We will meet as soon as possible.
    Please email you your details at [email protected]
    Regards,
    Mukul

Maybe you are looking for

  • File creation using OS command

    Hi all, I am working on a scenerio wherein receiver is a flat file.At output i need 2 files to be created: file one has the actuall payload and second file should contain the name of first file. This second file needs to be created with a OS command(

  • Hp pavilion g6-2231dx no speaker or headphones plugged in error

    Since update to windows 8.1 the sound and audio has stopped working.  Voice recognition has stopped and the speaker on the bottom tray has an X.  The response on the X on the speakers indicates "No speakers or headphones are plugged in." When I plug

  • Spinning wheel everytime I click on content

    I just installed DW CS3 on my MacBook Pro (2GB memory, 2.33GHz Core2Duo) running 10.4.10 with all updates installed. Everytime I open a page to edit, whenever I click on or higlight text (or tables, or anything at all), I always get a spinning wheel

  • HT4489 Where do I see my calendar usage?

    There's a maximum calendar entries of 25.000. I've got mutiple calendars with many enties and my iCloud gives some error messages. Where do I see my current usage?

  • About the implicit fact table

    Hi all, Can any one has any idea about the implicit fact table, where it is used. Any doc or screenshot with example will be helpful for me. Thanks once again.