Neo2-PLS fails to POST

hey guys, i just recently got a Neo2-PLS and the Prescott 2.8GHz. i previously had a 1.6GHz, so i had two processors to test. The first time i used the 1.6GHz, turned it on, and the D-bracket showed all red. i double checked the CPU and everything looked fine to me, although i did smell something funny. I put my 2.8GHz in and the same thing occured. the 2.8 is brand new. do you think i could've fried the motherboard and that was what the smell was? or could it be another problem? thanks guys!
Antec Truepower 480 watt (+5V 38A +12V 22A +3.3V 30A)
MSI Neo2-PLS motherboard
P4 2.8GHz 1mb 800fsb
512 PC2700 Kingston RAM
1-80GB hard drive
1-200 GB hard drive
GeForce 4 ti4200 128
some random pci cards-LAN, sound card.

Destroying a component can be something as simple as a static discharge which will leave no visible evidence to literally frying something which will normally leave a smoke trail as a clue. If your board powers up but will not boot and you have tried two cpu's, neither of which works, I would isolate the board from the case, connect the minimal number of components to it to see if it will boot.

Similar Messages

  • GDT-SCSI Controller and 865G Neo2 PLS

    Hi
    I try to install a GDT-SCSI RAID (GDT6528RS) Controller on a 865G Neo2 PLS. While POST of the controller works fine (it detects all the SCSI Disks, says "1 Disk for BIOS"), I can not boot of the RAID. The BIOS simply does not even try. I selected "SCSI" in the BIOS as first in the boot order, but no boot sector gets detected. I already updated the Firmware on the SCSI Controller, I tried to update the mobo BIOS, but I'm not sure which one to take, as it says "BIOS > 3.x are not supported on 865G Neo2".
    Has anybody a hint what I'm missing? The SCSI Card seems to need a PCI-Bus Master-Slot, there is nothing mentioned about one of those in the manual. May this be my Problem?
    Thank you for your help
    Flavio

    I got the same issue here with a K8T-Master1 AMD64 Mainboard. The BIOS detects and displays the RAID-Controller (a ICP Vortex GDT8546RZ 4-Channel S-ATA RAID Controller), but regardless what is configured for bootup, the BIOS doesn't even try to boot from this (say SCSI) device. All worked fine with the old ASUS Mainboard before (CUBX-E). I will upgrade the BIOS now, and if this doesn't work either, i need a simple IDE "Boot-HDD", since this is a developer workstation and the RAID is very important.......

  • Weird 865G Neo2 PLS OC Problem

    Ok, I consider myself a pretty good overclocker, but this has confused me to no end. Ok here is the situation. I got a neo 2 pls 865, with a p4 3.0 E prescott. I have 3 sets of ram I have been using to get an overclock, 1 512 kingston value ram, 4 256 Vdata, and dual channel kingson hyper X (performance ram) all PC 3200. I know the kingson hyper X can overclock pretty far from my AMD 64 overclocks.
    Ok so I got this 3.0 at fsb at 225 for a 3375 clock witch is OK, but Im sure I should be able to go further. Oh and that is with the mem at 333, so memory is running 391, still way under stock. And just to let you know it runs fine stock with memory running at 400.
    Ok so I turn up the fsb a little more like 231 ta 235 and I get tons of errors on memtest. So I clock the ddr clock to 266, (so the memory is running at like 312) and it still errors at around 67% of memtest. That was all with the kingston valuel ram and vdata stuff. So I put my kingston hyper X that I was thinking was going to run fine, but still SAME EXACT PROBLEM. :0(
    Sorry for the long post, got any help? Need more data? CPU and RAM voltage are stock.
    THANKS FOR ALL HELP.

    The MoBo model/version is printed between the PCI slots.
    Important thing is to separate the "old" 865 Neo2 from the "new" 865 Neo2 P-series.
    According to your description - 865G Neo2 PLS - you´ve got the newer P-serie MoBo and you should use the 3.x biosversions.
    http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=557&kind=1
    I believe 3.8 and 3.A are considered to be the best versions.
    Don´t get fooled by the 3.31a figures - this is the biosflashprogram version and not the actual MoBo bios version.
    The warning text about "cannot be used on the 865PE/G Neo2" - is related to the old 865 series.
    I see no need for you to go below 333mhz RAM speed, that should be enough up to a 250FSb OC.
    If you have trouble with that, the reason would be something else.
    To get best RAM performance you should run 2x512 ( or 4x256) RAM, in dual channel mode.
    You may need to raise your RAM voltage to 2.7v ( as dcasole already suggested) and be sure that AGP/PCI is locked to 66/33.
    It is possible that the onboard Graphics could limit your OC ponetial as well - Tried with AGP Graphiccard ?
    You also may have to raise the cpu voltage in the end, but be a bit carful with the prescott since it got it own flexibel voltage/ thermal control. No more then 1.5v. - Also recommend a good cpu cooler and good case airflow.
    You should be able to reach 3,6Ghz (240FSB) if your cpu has a "normal" potential.
    Your PSU is too weak on the 12v line - we usually recommmend 20amps or above with a prescott cpu and OC.
    Even more if you would get a high end VGA card.

  • JBO-26041: Failed to post data to database during "Insert": SQL Statement "

    Dear All,
    I am trying to insert the data into custom table,getting the following error. Please help me to resolve the issues.
    I have created one custom table in APPS schema having the primary key and History Columns.
    Created the EO based on the custom table and generate the create method.
    Created the VO based on the EO and generated the VOImpl, RowImpl Java Files.
    I am using the PER_PEOPLE_S sequence to populate the value into Primary key column.
    Calling the below code into create method of EO object to populate the value into Primarykey column.
    setPersPersonid(getOADBTransaction().getSequenceValue("PER_PEOPLE_S"));
    oracle.apps.fnd.framework.OAException: oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Insert": SQL Statement "INSERT INTO XXUTS_PERSON_T(PERS_PERSONID,PERS_FIRSTNAME,PERS_LASTNAME,CREATION_DATE,CREATED_BY,LAST_UPDATED_BY,LAST_UPDATE_DATE,LAST_UPDATE_LOGIN) VALUES (?,?,?,?,?,?,?,?)".
         at oracle.apps.fnd.framework.OAException.wrapperInvocationTargetException(Unknown Source)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(Unknown Source)
         at xxuts.oracle.apps.csc.person.webui.XXCreatePersonCO.processFormRequest(XXCreatePersonCO.java:67)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:72)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:597)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:521)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    ## Detail 0 ##
    java.sql.SQLException: ORA-00911: invalid character
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
         at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3074)
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:427)
         at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5740)
         at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4539)
         at oracle.apps.fnd.framework.server.OAEntityImpl.postChanges(Unknown Source)
         at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2996)
         at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2807)
         at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1971)
         at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2173)
         at oracle.apps.fnd.framework.server.OADBTransactionImpl.commit(Unknown Source)
         at xxuts.oracle.apps.csc.person.server.XXPersonMainAMImpl.savePersonToDatabase(XXPersonMainAMImpl.java:39)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(Unknown Source)
         at xxuts.oracle.apps.csc.person.webui.XXCreatePersonCO.processFormRequest(XXCreatePersonCO.java:67)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:72)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:597)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:521)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    java.sql.SQLException: ORA-00911: invalid character
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
         at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
         at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1161)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3074)
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:427)
         at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5740)
         at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4539)
         at oracle.apps.fnd.framework.server.OAEntityImpl.postChanges(Unknown Source)
         at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2996)
         at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2807)
         at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1971)
         at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2173)
         at oracle.apps.fnd.framework.server.OADBTransactionImpl.commit(Unknown Source)
         at xxuts.oracle.apps.csc.person.server.XXPersonMainAMImpl.savePersonToDatabase(XXPersonMainAMImpl.java:39)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:585)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAUtility.invokeMethod(Unknown Source)
         at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.invokeMethod(Unknown Source)
         at xxuts.oracle.apps.csc.person.webui.XXCreatePersonCO.processFormRequest(XXCreatePersonCO.java:67)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequestChildren(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.beans.OABodyBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.processFormRequest(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(Unknown Source)
         at OA.jspService(_OA.java:72)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:597)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:521)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
         at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
         at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Thanksm
    Sai Sankilisetty

    Dear Kumar,
    I have checked the datatypes of the table and datatypes of the Pageitems, both the datatypes are same.
    I have created the region using the wizard based on the VO.
    My custom table having only 3 columns and History Columns.Out of 3 columns PersPersonid is Primary key column and I am assigning the sequence value to the column in create method of EO as below
    public void create(AttributeList attributeList) {
    super.create(attributeList);
    setPersPersonid(getOADBTransaction().getSequenceValue("PER_PEOPLE_S"));
    //Here PER_PEOPLE_S is the Sequence
    Thanks,
    Sai

  • Aperture 2.1.3 fails to post an Album to my MobileMe Gallery

    Not sure if this is specific to my MacPro but in 10.5.7 Aperture has consistently failed to post an Album to my MobileMe Gallery. Is anyone else having a problem? I've exported the 53 versions as JPG full size and imported them to iPhoto 9 and created an Album. This has successfully posted the Album on my MobileMe Gallery.
    Failure is evidenced by the sudden disappearance of the Album from the MobileMe Album list of titles in Aperture, with nothing registered in MobileMe.
    Any clues gratefully received!

    Thanks - Ernie and Pistol! I suspect the the matter of a file version name could be the cause, but I'll have to conduct a careful check of them all in the recalcitrant album. The same Album - once in iPhoto 9 - has posted OK though, and it has the same version names. But there may be differences between iPhoto and Aperture. I think there's a Knowledge Base article about this - will check out later.
    Thanks very much for both posts!

  • PSUNX failed to post files to the report repository

    Dear All,
    i've just faced this issue. Before submitting here, this i've tried various things posted on web but not getting the solution,So posting here.
    If someone might have an idea about this...
    These are my settings
    Report Node Definition URL
    http://irshr.irs.co.id:8000/psreports/irshr
    URI Host: irshr.irs.co.id
    URI Resource:SchedulerTransfer/irshr
    Peoplesoft ligin URL :http://irshr.irs.co.id:8000/psp/irshr/EMPLOYEE/HRMS......
    and the error
           11:18:07AM      Request is reassigned from server PSNT to server PSUNX      
    10      11:18:19AM      Process request completed successfully.      
    10      11:18:33AM      Java Exception: Error while wr ite to file:java.lang.StringIn dexOutOfBoundsException: Strin g index out of range: -1  (63, 49)      
    10      11:18:33AM      SchedulerTransfer Servlet error.      
           11:18:33AM      PSUNX failed to post files to the report repository.  Server scheduled to try again on 2011-02-07-11.18.47.999881.  See log      
    10      11:18:48AM      Java Exception: Error while wr ite to file:java.lang.StringIn dexOutOfBoundsException: Strin g index out of range: -1  (63, 49)      
    10      11:18:48AM      SchedulerTransfer Servlet error.      
           11:18:48AM      PSUNX failed to post files to the report repository.  Server scheduled to try again on 2011-02-07-11.19.02.999526.  See log      
    10      11:19:03AM      Java Exception: Error while wr ite to file:java.lang.StringIn dexOutOfBoundsException: Strin g index out of range: -1  (63, 49)      
    10      11:19:03AM      SchedulerTransfer Servlet error.      
           11:19:03AM      HTTP transfer error.Also have the role "process sheduler admin" assigned to PS.
    Standard reports of Peoplsoft are running well but this is a customised SQR report that is giving error.
    -Regards

    Michel,
    This is the SQR code.(My first SQR report) :-)
    ! IRSEMPCN.sqr: Employee Report                                 *
    !  Description:  Employee Report 
    !               Confidentiality Information:                           *
    ! This module contains confidential and proprietary information        *
    ! of Oracle; it is not to be copied, reproduced, or transmitted        *
    ! in any form, by any means, in whole or in part, nor is it to         *
    ! be used for any purpose other than that for which it is              *
    ! expressly provided under the applicable license agreement.           *
    ! Copyright (C) 2007 Oracle. All Rights Reserved.                      *
    !       Creator     : ****                                    *
    !       Date       : 29 Juni 2010                                      *         
    #Include 'setenv.sqc'    !Set environment
    #Include 'datetime.sqc'  !Routines for date and time formatting
    #Include 'number.sqc'    !Routines to format numbers
    #Include 'stdapi.sqc' 
    #Include 'datetime.sqc'  !Routines for date and time formatting
    #Include 'datemath.sqc'  !Routines for date arithmetic
    #Include 'number.sqc'    !Routines to format numbers  
    begin-report
      do Init-DateTime
      do Init-Number
      do Get-Current-DateTime
      do Init-Report
    !  do Reset
      do Stdapi-Term
    end-report
    begin-setup
    declare-variable
        text      $BU
    !    text1     $plant
    !    text2         $empid
    end-declare
    end-setup
    ! Procedure: Init-Report
    ! Description: Initialise header and run control variables.
    begin-procedure Init-Report
      move 'IRSEM1' to $ReportID
      move 'IRS Employee' to $ReportTitle
      do Stdapi-Init
      if $prcs_process_instance = ''
      else
         do Select-Parameters
      end-if
      do Report
    end-procedure
    ! Procedure: Select-Parameters
    ! Description : Select the parameter values from the run control page
    begin-procedure Select-Parameters
    begin-select
    PARA.IRS_BU
      let $BU    = &PARA.IRS_BU
    !  let $plant = &PARA.IRS_DEPT
    FROM PS_PRCSRUNCNTL_EMP PARA
    WHERE PARA.OPRID       = $prcs_oprid
    AND   PARA.RUN_CNTL_ID = $prcs_run_cntl_id
    end-select
    do Get-OPRCLASS ($prcs_oprid,$oprclass)
    do Get-SetId($oprclass, $setid)
    !do Process-Get-Employee-Details($emplid)
    end-procedure
    ! Procedure: Get-OPRCLASS                                              !
    ! Descr:     Get operator class                                        !
    BEGIN-PROCEDURE Get-OPRCLASS ($PRCS_OPRID, :$oprclass)
    LET $OPRCLASS =''
    BEGIN-SELECT
    OPRCLASS    &OPRCLASS
       move  &OPRCLASS   to $oprclass
    FROM PSOPRDEFN
    WHERE OPRID = $PRCS_OPRID  
    END-SELECT
    END-PROCEDURE Get-OPRCLASS
    ! Procedure: Get-SetId                                                 !
    ! Descr:     Get Set ID                                                !
    BEGIN-PROCEDURE Get-SetId($OPRCLASS, :$setid)
    LET $setid =''
    BEGIN-SELECT
    SETID    &SETID
       move  &SETID   to $setid
    FROM PS_OPR_DEF_TBL_HR
    WHERE OPRCLASS = $OPRCLASS  
    END-SELECT
    END-PROCEDURE Get-SetId
    ! Procedure: Report
    ! Description:
    begin-procedure Report
        !let $FileName = 'E:\psft\psdmo\sqr\' || 'IRSEM1' || to_char(#prcs_process_instance) || '.csv'
        let $FileName = '{FILEPREFIX}' || '\IRSEM1' || '.csv'
        open $FileName as 1 for-writing record=20000:VARY
        write 1 from 'Business Unit,Department,Grade,Count'
        do Process-Get-Employee-Details($BU)
        close 1  
    end-procedure
    ! Procedure: Process-Get-Employee-Name
    ! Description: Get Employee Name
    begin-procedure Process-Get-Employee-Details($BU)
    begin-select
    PS_BUSUNIT_HR_VW.DESCR        &BUSINESSUNIT ,
    PS_DEPT_TBL.DESCR             &DEPARTMENT ,
    PS_JOBCODE_TBL.DESCR          &GRADE ,
    COUNT(PS_JOBCODE_TBL.DESCR)   &COUNT
       move &BUSINESSUNIT  to  $BUSINESSUNIT
       move &DEPARTMENT    to  $DEPARTMENT
       move &GRADE         to  $GRADE
       move &COUNT         to  $COUNT
       write 1 from $BUSINESSUNIT ',' $DEPARTMENT ',' $GRADE ',' $COUNT
    From PS_JOB,PS_JOBCODE_TBL,PS_BUSUNIT_HR_VW,PS_DEPT_TBL
    Where PS_JOB.Jobcode=PS_JOBCODE_TBL.Jobcode
    and PS_JOB.BUSINESS_UNIT=PS_BUSUNIT_HR_VW.BUSINESS_UNIT
    AND PS_JOB.DEPTID=PS_DEPT_TBL.DEPTID
    AND PS_DEPT_TBL.EFF_STATUS='A'
    And Rownum<5
    Group by PS_BUSUNIT_HR_VW.DESCR,PS_DEPT_TBL.DESCR,PS_JOBCODE_TBL.DESCR
    Order by  PS_BUSUNIT_HR_VW.DESCR
    end-select
    end-procedure          
                          

  • Urgent JBO-26041: Failed to post data to database during (in insert Clob)

    HI ,
    we have a code to get the clob and then write it to the database
    HttpSession session = UIServices.getHttpSession(context);
    byte] payloadByteArray = (byte[)session.getAttribute("FILE_BYTES_fileName");
    String payloadStr = null;
    try {
    //get the string
    payloadStr = new String(payloadByteArray, "UTF-8");
    // System.out.println("---payloadstr --->>>>"+payloadStr) ;
    ClobDomain cd =new ClobDomain(payloadStr);
    XhubRoutingRulesAMImpl am = (XhubRoutingRulesAMImpl)Jbo.getApplicationModule(context);
    SnwRoutingRulesVOImpl SnwRoutingRulesVO= (SnwRoutingRulesVOImpl) am.findObject("SnwRoutingRulesVO");
    Jbo.applyViewCriteriaOneRow(SnwRoutingRulesVO,"RoutingRuleId",routingRuleId);
    SnwRoutingRulesVO.executeQuery();
    SnwRoutingRulesVORowImpl row=null;
    while (SnwRoutingRulesVO.hasNext())
    row =(SnwRoutingRulesVORowImpl) SnwRoutingRulesVO.next();
    row.setPreXslt(cd);
    row.setOverridexslt("Y");
    row.setPostXslt(null);
    //commiting the data
    Jbo.commit(am);
    session.removeAttribute("FILE_BYTES_fileName");
    catch(Exception e){
    e.printStackTrace();
    session.removeAttribute("FILE_BYTES_fileName");
    THE exception are :
    oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Update": SQL Statement "null".
    at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:8139)
    at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:7994)
    at oracle.apps.snw.schema.server.WhoEntityImpl.doDML(WhoEntityImpl.java:200)
    at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6319)
    at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3168)
    at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2976)
    at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2014)
    at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2273)
    at oracle.apps.snw.uicommon.Jbo.commit(Jbo.java:148)
    at oracle.apps.snw.tpadmin.webui.TPRouteRulesEvent.fileUpload(TPRouteRulesEvent.java:241)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.cabo.servlet.event.MethodEventHandler.handleEvent(Unknown Source)
    at oracle.cabo.data.jbo.servlet.event.ChainingEventHandler.handleEventImpl(Unknown Source)
    at oracle.cabo.data.jbo.servlet.event.FindRootAppModuleEventHandler.handleEventImpl(Unknown Source)
    at oracle.cabo.data.jbo.servlet.event.BaseEventHandler.handleEvent(Unknown Source)
    at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
    at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
    at oracle.cabo.data.jbo.xml.parse.JboParserExtensionImpl$SynchronizingEventHandler.handleEvent(Unknown Source)
    at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
    at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
    at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
    at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
    at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
    at oracle.cabo.servlet.BajaServlet.doGet(Unknown Source)
    at oracle.cabo.servlet.UIXServlet.doPost(Unknown Source)
    at oracle.cabo.servlet.BajaServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:159)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:326)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3592)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2202)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2108)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1432)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused by: java.lang.NullPointerException
    at oracle.jbo.domain.ClobDomain.writeCharsToLob(ClobDomain.java:1322)
    at oracle.jbo.domain.ClobDomain.saveToDatabase(ClobDomain.java:464)
    at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:8114)
    ... 49 more
    This same code is running fine sometime and we didnt get any issue but sometime it is throwing the error .Its very strange

    EDIT: Nevermind you're using ClobDomain. I was thinking of standard jdbc CLOB's.
    Edited by: Jan Nawara on May 5, 2010 10:35 AM

  • What are the ways to handle Idocs which are failed to post to R/3

    Hi Experts
    What are the ways to handle Idocs which are failed to post to R/3  after sucessfully configuration of the Scenario.
    Thanks & Regards
    Aravind

    Hi
    Check the Idoc Status in R/3 with WE05.
    Idocs will fail in following conditions
    1) Idoc will be in error if all the mandatory field are not mapped.
    2) If partner profile is not maintained.
    3) Most of the times, idocs will be in error due to functional issues.....check the status and take help from functional guys.
         Once the error resolved, reprocess the same idoc using BD87
    Regards
    Abhijit
    Edited by: Abhijit Bolakhe on Mar 18, 2010 3:11 PM

  • JBO-26041 Error Failed to post data to database

    This is the error I am getting. This works for one database schema fine and the other I get this error.
    oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Insert": SQL Statement "BEGIN INSERT INTO PTS_COMMUNICATIONS(PTS_ID,CATEGORY_CD,LOGIN_ID,MEDIA_TYPE,COMM_IN_OUT,SUBMIT_DT,CBER_RECEIVED_ISSUED_DT,NOTES,COMMUNICATION_STATUS) VALUES (:1,:2,:3,:4,:5,:6,:7,:8,:9) RETURNING COMM_ID INTO :10; END;".
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:498)
         at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5413)
         at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4235)
         at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2937)
         at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2748)
         at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1922)
         at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2115)
         at gov.fda.cber.pts.model.services.CberPtsServiceImpl.insertCommunication(CberPtsServiceImpl.java:2604)
         at gov.fda.cber.pts.controller.strutsactions.CreateCommunicationPageAction.onSaveCommunication(CreateCommunicationPageAction.java:191)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java)
         at oracle.adf.controller.lifecycle.PageLifecycle.handleEvent(PageLifecycle.java:544)
         at oracle.adf.controller.struts.actions.StrutsPageLifecycle.handleEvent(StrutsPageLifecycle.java:252)
         at oracle.adf.controller.struts.actions.StrutsUixLifecycle.handleEvent(StrutsUixLifecycle.java:237)
         at oracle.adf.controller.lifecycle.PageLifecycle.processComponentEvents(PageLifecycle.java:477)
         at oracle.adf.controller.struts.actions.StrutsUixLifecycle.processComponentEvents(StrutsUixLifecycle.java:163)
         at oracle.adf.controller.struts.actions.DataAction.processComponentEvents(DataAction.java:236)
         at oracle.adf.controller.struts.actions.DataAction.processComponentEvents(DataAction.java:430)
         at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:126)
         at oracle.adf.controller.struts.actions.StrutsUixLifecycle.handleLifecycle(StrutsUixLifecycle.java:70)
         at oracle.adf.controller.struts.actions.DataAction.handleLifecycle(DataAction.java:223)
         at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:155)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:527)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    ## Detail 0 ##
    java.sql.SQLException: ORA-04098: trigger '$PANDEYS.PTS_COMMUNICATIONS_BIUR' is invalid and failed re-validation
    ORA-06512: at line 1
         at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:304)
         at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:271)
         at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:625)
         at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:180)
         at oracle.jdbc.driver.T4CCallableStatement.execute_for_rows(T4CCallableStatement.java:790)
         at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1101)
         at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2901)
         at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:2973)
         at oracle.jdbc.driver.OracleCallableStatement.executeUpdate(OracleCallableStatement.java:4145)
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:356)
         at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:5413)
         at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:4235)
         at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:2937)
         at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:2748)
         at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:1922)
         at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2115)
         at gov.fda.cber.pts.model.services.CberPtsServiceImpl.insertCommunication(CberPtsServiceImpl.java:2604)
         at gov.fda.cber.pts.controller.strutsactions.CreateCommunicationPageAction.onSaveCommunication(CreateCommunicationPageAction.java:191)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java)
         at oracle.adf.controller.lifecycle.PageLifecycle.handleEvent(PageLifecycle.java:544)
         at oracle.adf.controller.struts.actions.StrutsPageLifecycle.handleEvent(StrutsPageLifecycle.java:252)
         at oracle.adf.controller.struts.actions.StrutsUixLifecycle.handleEvent(StrutsUixLifecycle.java:237)
         at oracle.adf.controller.lifecycle.PageLifecycle.processComponentEvents(PageLifecycle.java:477)
         at oracle.adf.controller.struts.actions.StrutsUixLifecycle.processComponentEvents(StrutsUixLifecycle.java:163)
         at oracle.adf.controller.struts.actions.DataAction.processComponentEvents(DataAction.java:236)
         at oracle.adf.controller.struts.actions.DataAction.processComponentEvents(DataAction.java:430)
         at oracle.adf.controller.lifecycle.PageLifecycle.handleLifecycle(PageLifecycle.java:126)
         at oracle.adf.controller.struts.actions.StrutsUixLifecycle.handleLifecycle(StrutsUixLifecycle.java:70)
         at oracle.adf.controller.struts.actions.DataAction.handleLifecycle(DataAction.java:223)
         at oracle.adf.controller.struts.actions.DataAction.execute(DataAction.java:155)
         at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
         at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
         at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1485)
         at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:527)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16)
         at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:239)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
         at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
         at java.lang.Thread.run(Thread.java:534)
    any clues?

    Seems like you have a database trigger on the table that is in invalid mode - talk with your DBA to find out why.
    (Or open it in JDeveloper and make sure it compiles).

  • Jdeveloper 11.1.1.6 fail to post data with uploaded orddoc file

    I migrated our application in 11.1.1.6 from 11.1.1.4
    everything works fine except from posting data of entity with OrdDocDomain attribute.
    Anyone have the same issue?
    the log is
    JBO-26041: Failed to post data to database during "Update": SQL Statement "UPDATE DOCUMENT Document SET FILENAME=:1,LOBCONTENT=:2,UPDATED_BY=:3,UPDATED_ON=:4,OPTLOCK_VERSION=:5 WHERE ID=:6".
         at com.sun.el.parser.AstValue.invoke(Unknown Source)
         at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
    Caused by: oracle.jbo.DMLException: JBO-26041: Failed to post data to database during "Update": SQL Statement "UPDATE DOCUMENT Document SET FILENAME=:1,LOBCONTENT=:2,UPDATED_BY=:3,UPDATED_ON=:4,OPTLOCK_VERSION=:5 WHERE ID=:6".
         at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:583)
         at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:8647)
         at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:8579)
         at com.intralot.igp.model.base.EntityImpl.doDML(EntityImpl.java:96)
         at oracle.jbo.server.EntityImpl.postChanges(EntityImpl.java:6816)
         at oracle.jbo.server.DBTransactionImpl.doPostTransactionListeners(DBTransactionImpl.java:3290)
         at oracle.jbo.server.DBTransactionImpl.postChanges(DBTransactionImpl.java:3093)
         at oracle.jbo.server.DBTransactionImpl.commitInternal(DBTransactionImpl.java:2097)
         at oracle.jbo.server.DBTransactionImpl.commit(DBTransactionImpl.java:2378)
         at oracle.adf.model.bc4j.DCJboDataControl.commitTransaction(DCJboDataControl.java:1615)
         at oracle.adf.model.dcframe.LocalTransactionHandler.commit(LocalTransactionHandler.java:139)
         at oracle.adf.model.dcframe.DataControlFrameImpl.commit(DataControlFrameImpl.java:1226)
         at com.intralot.igp.view.utils.ADFUtils.dcCommit(ADFUtils.java:466)
         at com.intralot.igp.taskflows.view.backing.documents.Documents.editDocumentListener(Documents.java:67)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         ... 72 more
    Caused by: java.sql.SQLException: Undefined type
         at oracle.jpub.runtime.Util._convertToOracle(Util.java:277)
         at oracle.jpub.runtime.Util.convertToOracle(Util.java:167)
         at oracle.jpub.runtime.MutableStruct.getDatumAttribute(MutableStruct.java:323)
         at oracle.jpub.runtime.MutableStruct.getDatumAttributes(MutableStruct.java:347)
         at oracle.jpub.runtime.MutableStruct.toDatum(MutableStruct.java:118)
         at oracle.ord.im.OrdSource.toDatum(OrdSource.java:93)
         at oracle.jpub.runtime.Util._convertToOracle(Util.java:183)
         at oracle.jpub.runtime.Util.convertToOracle(Util.java:167)
         at oracle.jpub.runtime.MutableStruct.getDatumAttribute(MutableStruct.java:323)
         at oracle.jpub.runtime.MutableStruct.getDatumAttributes(MutableStruct.java:347)
         at oracle.jpub.runtime.MutableStruct.toDatum(MutableStruct.java:118)
         at oracle.ord.im.OrdDocBase.toDatum(OrdDocBase.java:96)
         at oracle.jdbc.driver.OraclePreparedStatement.setORADataInternal(OraclePreparedStatement.java:10450)
    Anyone have the same issue?
    Thanks

    We are getting the same issue when migrated to latest WLS version 10.3.6.0(ADF runtime 11.1.1.6) from WLS 10.3.3.0.
    The Exception we are getting while trying to post an ORD type object:
    java.sql.SQLException: Undefined type
    at oracle.jpub.runtime.Util._convertToOracle(Util.java:277)
    at oracle.jpub.runtime.Util.convertToOracle(Util.java:167)
    at oracle.jpub.runtime.MutableStruct.getDatumAttribute(MutableStruct.java:323)
    at oracle.jpub.runtime.MutableStruct.getDatumAttributes(MutableStruct.java:347)
    at oracle.jpub.runtime.MutableStruct.toDatum(MutableStruct.java:118)
    at oracle.ord.im.OrdSource.toDatum(OrdSource.java:93)
    at oracle.jpub.runtime.Util._convertToOracle(Util.java:183)
    at oracle.jpub.runtime.Util.convertToOracle(Util.java:167)
    at oracle.jpub.runtime.MutableStruct.getDatumAttribute(MutableStruct.java:323)
    at oracle.jpub.runtime.MutableStruct.getDatumAttributes(MutableStruct.java:347)
    at oracle.jpub.runtime.MutableStruct.toDatum(MutableStruct.java:118)
    at oracle.ord.im.OrdImageBase.toDatum(OrdImageBase.java:99)
    at oracle.jdbc.driver.OraclePreparedStatement.setORADataInternal(OraclePreparedStatement.java:10450)
    at oracle.jdbc.driver.OraclePreparedStatement.setObjectInternal(OraclePreparedStatement.java:11651)
    at oracle.jdbc.driver.OraclePreparedStatement.setObject(OraclePreparedStatement.java:11631)
    at oracle.jdbc.driver.OraclePreparedStatementWrapper.setObject(OraclePreparedStatementWrapper.java:253)
    at weblogic.jdbc.wrapper.PreparedStatement.setObject(PreparedStatement.java:357)
    at oracle.jbo.server.OracleSQLBuilderImpl.bindInsertStatement(OracleSQLBuilderImpl.java:2035)
    at oracle.jbo.server.EntityImpl.bindDMLStatement(EntityImpl.java:10516)
    at oracle.jbo.server.OracleSQLBuilderImpl.doEntityDML(OracleSQLBuilderImpl.java:412)
    at oracle.jbo.server.EntityImpl.doDMLWithLOBs(EntityImpl.java:8647)
    at oracle.jbo.server.EntityImpl.doDML(EntityImpl.java:8579)
    at oracle.apps.grc.cms.model.eo.MediarepositoryimagesImpl.doDML(MediarepositoryimagesImpl.java:52)
    Can anyone please help on this. Is there any work around available?

  • Portege R500 fails during POST

    Hello all,
    I've got a Portege R500 for an year now and yesterday it started to fail during POST, I presume.
    The display is stuck at the power on screen, with the boot device selection icons, but no action can be taken (entering bios, selecting boot device, etc...). I've already tried to remove the battery for a couple of hours, without any result, but I assume that It would take more than a couple of hours to deplete the backup battery and reset the CMOS...
    Other than the boot screen, no other information is available, so I'm thinking that this machine is dead... Does anybody had a similar problem?
    Best regards,
    Paulo

    Hi
    The POST (power on self test) is executed by BIOS.
    During the POST some components and parts on the motherboard would be checked.
    For example POS checks the CPU, CPU related modules, CMOS RAM, CPU cache, GPU memory, main RAM and other hardware components, etc
    In most cases a hardware problem on the motherboard can be the reason if the POST cannot be passed properly.
    Usually the technician would recommend replacing the motherboard but as you know the motherboard is not cheap. Its one of the expensive notebook parts.
    Its not easy to say what the best solution for you is; I think you should ask a technician for a hardware check and then you would know whats exactly wrong
    After that you can decide what you want to do

  • G33M-FI Fails to POST without clearing CMOS

    Hello,
    I purchased a new system with a G33M-FI mainboard in December.  Everything worked great on the first boot, but the first time I restarted it failed to POST.  I had to clear CMOS settings using the jumper.  On the next boot I updated the BIOS to 1.2, restarted multiple times and everything worked fine for a while...
    Now occasionally the system again fails to POST.  This does happen on both a restart or a cold boot.  Each time this has happened clearing the CMOS settings with the jumper does "fix" the problem and allows the system to boot again but it is VERY annoying.  The problem also appears to be getting more and more frequent as time goes on (but maybe this is just my imagination).  I have been leaving all of the CMOS settings at the default values so I don't think this is caused by something I did.
    Any thoughts?
    Here are the system specs:
    MSI G33M-FI (bios version 1.2, default settings)
    Core 2 Duo E4500 2.2G (800MHz)
    Patriot 2GB Kit PDC22G6400LLK (2 sticks of 1GB, 800MHz 4-4-4-12)
    Antec NSK3480 micro ATX case w/ 380w power supply
    WD 320GB 3200ks SATA hard drive
    Samsung sh-s203b/bebn DVD+/-RW sata drive

    List PSU details, look for them over PSU sticker.
    Try with just one memory stick alone in a 1st DIMM slot near to CPU socket and see if problem persist.
    You may need to up memory vcore a bit,(in BIOS ==> "Frequency/Voltage Control", "Memory Voltage", Setup 2.0V and re-test)
    PDC22G6400LLK:
    http://www.patriotmem.com/products/detailp.jsp?prodline=5&catid=2&prodgroupid=38&id=317&type=1

  • Safari crashes on launch -- but Request for Help fails to post...

    For a week, I've tried to post a message,to the "Safari for Mac" forum. But it fails to post.
    Instead, I get a message, advising "We'll be right back".
    Other people have been posting messages during this week -- so what's wrong with mine?
    My message is a request for a solution to my problem of Safari crashing immediately on launch.
    The message includes a Safari Crash Report, which is quite detailed (as a textEdit file, compressed Archive, it runs to 29KB).
    Hoping that this brief plea gets through. TIA.

    The problems are caused by third party input managers/enhancers that have not yet been updated by their developers to comply with the standards used by Safari 4.1.and/or Safari 5.
    In your case these are:
    007af000 /Library/InputManagers/SIMBL/SIMBL.bundle/Contents/MacOS/SIMBL
007f4000 /Library/InputManagers/Ecamm/Ecamm Plugin Loader.bundle/Contents/MacOS/Ecamm Plugin Loader
    00e0a000 /Library/InputManagers/Ecamm/Plugins/iGlasses.plugin/Contents/MacOS/iGlasses
00e45000 /Users/john/Library/Application Support/SIMBL/Plugins/VideoboxSafariPlugin.bundle/Contents/MacOS/VideoboxSafari Plugin
    02cd6000 /Users/john/Library/Internet Plug-Ins/iGetterBundle.plugin/Contents/MacOS/iGetterBundle
02e02000 /Users/john/Library/Internet Plug-Ins/iGetterBundle.plugin/Contents/Resources/iGetterSafariBundle.bundle/Con tents/MacOS/iGetterSafariBundle
    You fill find them in one or either of these folders:
    Home/Library/Input Managers
    Hard Disk/library/Input Managers
    Hard Disk/Library/Application Support
    although the exact location is indicated in your crash report as quoted above - look under 'Binary Images'.
    Close Safari and delete them, then restart Safari and it should be working normally. Alternatively drag them to the desktop and restart Safari. then add them back one at a time, restarting Safari every time, until you find the one (or more) causing the crash.
    Check with the developers of the plug-in/s in question for updates that are Safari 5 compliant.

  • G41m-P34 Fail to post

    Fails to post unless you power off and power on 5 to 10 times then will post and runs fine.
    I have taken everything out of case and tried this way as well, same problem.
    Running Pentium d 820 2.8g
    Kingstone khx1333c7d3k2/4gx
    tried 2 pci video cards out of working systems.
    Tried 2 power supplies
    The LED light on the mother board will stay on when it fails to post but if you power off and power on 5-10 times it will post and was able to install windows just fine. until reboot..

    See here http://www.msi.com/product/mb/G41M-P34.html#?div=CPUSupport
    It supports this one: Pentium D  Smithfield  SL8CP  820  2.80  2M   B0   
    Is that the one you have ? Check the code SL8CP
    Please advise your BIOS version as the CPU is supported from 7592vP6  dated 2011-02-14, which is pretty recent.
    If you have an older BIOS then you will have to get a compatible CPU first to do a safe BIOS flash.
    Use the forum flasher if you are going to flash. >>Use the MSI HQ Forum USB flasher<<

  • Max VDIMM on 865G neo2 pls?

    I can't find this info anywhere.  Please clue me in. Thanks!

    My 865PE board v.1 (pcb1) - 3.30v with bios 1.9
    My 865G neo2 PLS v.2 ( pcb2) - 3.0v with bios 3.A

Maybe you are looking for

  • Error while assigning group

    Hi friends,   1. Iam getting the following error when assigning the group to a user.   <b>An error occurred while adding group assignments; to see the correct status, perform a new assigned groups search</b> 2. When uploading the template also its th

  • Can't get Airport Express to work with Windows

    I got a used Airport Express to use as a wireless print server. I got only the Airport Express; no manuals or CD's or anything. I have been reading through the manuals and everything online, but I can't get anything to work. It seems like I need to g

  • Problem after creating a costumer view

    hi guys, i just created a new view from a costumer table. the problem is that when i access the view from sm30, i click on add new entries, and some fields have label and some has only the +, symbol, i dont now why! something like this: begda________

  • US BANK RE-CON?

    Has anyone had succes recently with overturning a denial for a US Bank business card?  I waited five plus months from my last CC app. and froze ARS before applying for the Business Edge card, and was immediately declined for "high balances."  I do ha

  • How-to: mail a bunch of QT or poster frames that link ...

    to a site where the high res of them resides? tx JP