Neo4 board: alarm going off when booting up, for no obvious reason?

Hi,
I have a Neo4 Platinum with a AMD 3200+ / 1024 MB TwinMOS / ATI X800XL.
When booting up from cold, the Neo4 starts to beep. (comes out of the "MSI CoreCell" I think, the standard beeper is detached)
The alarm stops suddenly when the WinXP loading screen appears.
Everything is working fine, no malfunctions whatsoever. I would just like to stop my PC from waking up all of my house whenever my Neo4 boots up.
Any suggestions?
Thanks!

Thanks for the replies so far.
I took a look at the PC Health overview in my BIOS, and it states the following:
System Temp = 42°C
CPU Temp = 48°C
System Fan Speed = 0 rpm
CPU Fan Speed = 1622 rpm
Northbridge Fan Speed = 7850 rpm
CPU VCore = 1.42
+3.3V = 3.34
+12V = 11.97
+5V = 5.10
Nothing dramatical there I think..?
There is no value flashing, and no obvious culprit as you suggested, bassmadrigal.
SAB, where can I change the "low rpm" settings for my CPU fan? I am not sure if I can adjust the speed of my CPU fan, but I will take a look.
Anyways, is there no way to simply shut off that annoying alarm? Everything seems OK, there should be no need for screwing with everyone's nerves in this household 

Similar Messages

  • Is there a way to stop the brightness from going up when alarm goes off?

    I have an iPhone 5s running iOS 7.0.6. I plug it in at night next to my bed and use it as an alarm clock. I am running the NiceClock app because it has a great black background with slim red clock numbers (doesn't throw a lot of glare). I am using the built-in Clock app that comes with the current iOS as the alarm (NiceClock, while great for a simple bedside clock with no glare, does not come with an alarm). I set my iPhone's brightness on the lowest possible setting to keep the backlight glare down. It's great. Low glare, and I can still see the time if I wake up in the middle of the night without having to fumble with the iPhone. My problem is when the alarm goes off the brightness level jumps up to maximum. Is there a way to prevent the brightness level of the iPhone from changing when the alarm goes off?

    Yes the calendar is gone. I guess it is the notification center I am referring to that comes down when I accidently swipe the top of the screen. Is there a way to stop of notification center from coming down if you swipe the screen? I figured out how to stop the control center from coming up if you swipe the bottom on the screen. Now I just need to figure out how to stop the top of the screen from doing the same thing

  • My Iphone 5 clock alarm isnt going off when its "on sound", it acts as if its on vibrate and doesnt wake me up. Started with the IOS upgrade. Is there a bug?

    My new Iphone 5 clock alarm isnt going off where I can hear it.  Its started on my 4S when I upgraded to IOS6 and even on the Itouch too.  I set the clock alarm, turn on sound (not silent), the alarm goes off, but no sounds comes out.   I have to reset home to get it to recognize its off, but that doesnt always work, it did it on both my Itouch and Iphone5 I almost over slept this morning because never of them went off and woke me up.   Acted as it the sound was down (which it wasnt) and it was on silent mode (which it wasnt)  Is there a bug with this?  I cant trust my phone now to wake me up.  Any help?  Thanks Tracey

    Same problem here. Me and my girlfriend swapped iphone 5's (she has white, I have black) in may and I rely on the alarm every morning to wake me up for work. It hasn't let me down.
    A few days ago I set 2 alarms very early in the morning to wake me up for an early morning flight. Neither alarm made a sound & I missed the flight!!
    We then swapped our phones back & she has just had exactly the same thing happen & has missed an important meeting at work. Again, quite an early morning alarm. The odd thing is I have a black iphone 5, also latest OS,  never had this happen to me...
    Has anyone solved this problem. I can't make it repeat (reset the same alarm for a different time & it goes off fine).
    Does I need to buy her a dedicated alarm clock!?!

  • Get a Boolean When a DSC Alarm Goes Off

    Hello LabVIEWers!
    I've got probably 30 shared variables that I'm monitoring and logging using the DSC module.  I'm starting to use the alarms functionality and what I'd like to be able to do is run some code that sends my team a text / email when an alarm goes off. 
    It seems to me the easiest way to do this would be to somehow monitor the alarms and produce a T/F value that I can use to run a case structure.  For whatever reason I'm not seeing how to do this easily.  Is there a VI I'm missing?  I just want to be able to produce a True value when the variable is in alaram and a False value when it's not.
    Thanks for the help!
    -Mike

    Hi Mike,
    I've attached a few articles that you might find useful. They include descriptions and instructions.
    Configuring Alarms for Shared Variables (DSC Module):
    http://zone.ni.com/reference/en-XX/help/371618F-01/lvdscconcepts/set_alarms_for_sv/
    Configuring Alarms for Boolean Shared Variables (DSC Module):
    http://zone.ni.com/reference/en-XX/help/371618F-01/lvdschelp/config_blalm_in_db/
    I also ran across this Discussion Forum that you might help you out once you've established your alarm configuration.
    Send Email and Text when an Alarm goes off - LabVIEW DSC
    http://forums.ni.com/t5/LabVIEW/Send-Email-and-Text-when-an-Alarm-goes-off-LabVIEW-DSC/m-p/1568580?r...
    Hope this helps!
    Jordan

  • My iPhone 4 takes pictures when phone rings and alarm goes off.

    My camera flash goes off when I receive an incoming call and when my alarm goes off.

    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
    Have you tried ALL the troubleshooting steps?  If you have and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible exchange.

  • Nano crashes (reboots) when alarm goes off

    When the alarm goes off on my Ipod it just reboots and shows the Apple logo.
    I have the language set to Swedish but when I set the language to English the alarm works without any problems, so my guess is that it's something with the firmware.
    So here is my questions:
    Is anyone experiencing similar problems?
    Is it possible to reinstall the latest firmware, just to make sure it's installed correctly?
    Can anyone test to set the language to Swedish and see if it happens for you too?
    I have a Nano 3g with v.1.1 PC version.
    /Andreas
    Message was edited by: asjokvis

    Ok, then I guess it's a well known bug (at least in Sweden) now when we at least have three iPods with the same problems. So I guess we just have to wait for a firmware that fixes this issue.
    I reported it as a bug to Apple (if they care), so let's hope they can fix it until the next update.
    Thanks for your answer and if anyone else is having this problem maybe they can let us know in this thread. It would also be interesting if someone that has the language set to Swedish still can use the alarm (reminders) without it crashing.

  • How-do-i-use apple calaendar to-allow-my-staff-and-i-to-share-calendars-but-not-have-my-alarms-going-off-on- their-ihones

    how-do-i-use apple calaendar to-allow-my-staff-and-i-to-share-calendars-but-not-have-my-alarms-going-off-on- their-ihones
    Really annoying can it be done.?
    Searched everywhere for an answer surely other people have had this problem
    Cheers

    https://discussions.apple.com/message/19818985#19818985

  • Is there any way to keep the flash from going off when you receive a text or other notification?

    I have an iphone 4s.  Is there any way to keep the flash from going off when you receive a text or other notification?  I keep it next to my bed at night and keep thinking there is lightning when something comes thru.  LOL

    Go to Settings>General>Accessibility and turn LED Flas for Alerts to Off.

  • Alarm going off in core center

    I have an alarm going off in core center Theres a red arrow next to wherer it says 12 v. then in the white box it says 10.95 v  any one know what it means and what I could do about it I don't know whats normal for the readings I get in core center. My pc has been locking up and certian games wont load unless it's really cool in the room.

    Good questions! Some folks have acceptable readings with CoreCenter, by verifying them with the Hardware Monitor (in BIOS). I compared them with my SpeedFan program, and as far as temps go..I use a laser temp gun to check CPU, case, and video card temps. Voltages on the PSU can be verified with a voltmeter of course. The specifications on your NB fan should be in your manual. Or you can check out this thread at Anandtech:
    http://forums.anandtech.com/messageview.aspx?catid=29&threadid=1513370&STARTPAGE=2&enterthread=y

  • Backight goes off when unplug charger

    Can someone help ?please. A few days ago the backlight of my T61 started to goes off when i unplug the A/C charger. I can still see the computer running fine, it's the screen is very dark. this also happen when i use FN + end key to dim the light  but only after the third level. After the screen goes dark i have to shutdown, plug in the charger and turn it back on then the screen is fine.Could this be something is wrong with the THINKVANTAGE PRODUCTIVITY CENTER?? Any help is highly appreciated

    SOLVED!
    in bios changed in battery section - USER DEFINIED.
    in OS chose instead of [Ubuntu 9.04 and Fedora 11 ] the new Ubuntu 9.10.
    works like charm!

  • When FT is full screen, camera goes off when swiping to a different app

    When FT is full screen, camera goes off when swipping to a different app or the desktop. This is frustrating to the other person. We were having a discussion and I said I wouls look it up and when I swipped to Safari, the camera went off. It makes the other person think the connection has been lost. Anywhere to report issues like this to Apple?

    In reading other threads, I found a few that recommend a hard reset to solve the issue.  I have tried it, and thus far haven't expereienced the problem again.  Hopefully that's it then

  • My iphone 3g running ios 4.2.1 goes off when it is idle

    i need help,
    My iphone 3g running ios 4.2.1 goes off when it is idle and i have to reboot it before it starts work.
    it does not go off when it plays music..... or plugged into the PC.

    It's likely running slow because of iOS4, not because of apps being open.  Standard troubleshooting...
    Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    If still a problem restore from your backup.
    If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    You'll most likely need to restore as new to get it running as good as it can.  A 3G will never run as good on iOS4 as it did on iOS3.

  • 'Get info' does not open after alarm goes off

    Using iCal, before an alarm goes off, I'm able to 'get info'/'edit' the event, but after an alarm goes off, I'm unable to edit the event unless I quit and reopen the app. Any ideas why and how to resolve?

    I posted this over a week ago. Does anyone have an idea how to rectify this. I can't be the only one having this problem!
    (Using iCal, before an alarm goes off, I'm able to 'get info'/'edit' the event, but after an alarm goes off, I'm unable to edit the event unless I quit and reopen the app. Any ideas why and how to resolve?)

  • My alarm goes off one hour early and this is a nuisance. How can I solve it

    Every morning I wake up an hour early because my iphone 3GS alarm goes off an hour early. Please tell me how to sort this out.
    Thanks

    Welcome to Apple Support Communities.
    To cause Mail to display outgoing attachments as icons instead of in-line, you can open Terminal.app and insert this command:
    defaults write com.apple.mail DisableInlineAttachmentViewing 1
    To enable in-line attachments again once disabled (so attachments again appear as documents displayed in-line, not icons):
    defaults write com.apple.mail DisableInlineAttachmentViewing 0

  • My display goes off when Battery being charged on Acer E5-511 after upgrading to Windows 10

    I upgraded my window 8.1  to Window 10 on Acer E5-511 machine yesterday.  I notice that when I switch on power to charge its battery, a beep sounds and display goes off. when power is again switched off the display comes back with a beep again.  However, when the machine battery  is allowed to charge for some time, either it goes to hibernation mode or stops working since display does not come back even after switching off the power supply.  This peculiar problem did not existed when I had used this Notebook with windows 8.1 for past eight months.   Can any one help me to solve this problem as i am being forced to charge the battery only when Notebook is not powered on.

    A BIOS update fixed Grey Bat's (a.k.a. Myotis grisescens) problem. http://community.acer.com/t5/Windows-10/Restart-problems-with-Acer-E5-511-P8C8-laptop/m-p/370322#M24 http://us.acer.com/ac/en/US/content/drivers  Edit: Acer also said that "Your system may require additional software, firmware, and/or a BIOS update to install and run Windows 10." http://us.acer.com/ac/en/US/content/windows10-eligible-models

Maybe you are looking for

  • Coloring a Symbol in "Vellum" Theme??

    The "Vellum" theme provides a square keyline box at the beginning of a text line - I would like to change its color to Red but can not highlight the object only the following text. Any ideas??

  • How to install Premiere Pro CS6 via Creative Cloud Desktop (32-bit-system)

    Hello community, I have used Premiere Pro CS6 as a Creative Cloud Version on my PC with windows xp. After upgrading to Windows 7 Premiere Pro is not longer available in Creative Cloud Desktop App because it is an older PC with 32bit-system. I have re

  • Vendor Evaluation Configuration

    Configuring the vendor evaluation there is no any subcriteria under "delivery" for early delivery that can be evaluated, I know we can create subcriteria, however I do not know how the new subcriteria will be evaluated if there is no any "scoring met

  • How to implement File to jdbc scenario

    Hi Guys,            I am implementing a scenario where in data is passed from File to the database. I have completed the file adapter configuration part. now how do I implement the jdbc adpter part? Which database can I use for testing on the local m

  • Why IVisualElementContainer does not have "getChildren" method defined?

    Hi all, In Flex 3 SDK Container.as has method getChildren() and rawChildren property typed as IChildList. But In Flex 4 the interface IVisualElementContainer does not have a definition for getChildren() > thus neither SkinnableContainer nor Group hav