Neo4 + OCZ Value PC3200 2x1GB Sticks = Issues?
Has anyone had any issues with OCZ value memory and the neo4? This is the memory.... (OCZ4002048V3DC-K)
http://www.newegg.com/Product/Produ...N82E16820146841
Just wanted to know if anyone is using this and if there are any KNOWN issues...THANKS!
Hi,
A friend of mine is using OCZ value ram pc3200 and she has not had any problems. Her pc is neo4 plat 3000v venice. not O/C'ed.
Hope this helps
Similar Messages
-
Copy functionality which did not copy Long Text values causing us an issue
Two new Master Recipes created in Bathurst by using copy functionality in transaction C201 contained SRC value errors believed to be caused by changes in the copy
functionality which did not copy Long Text values causing us an issue when creating Process Orders. Current workaround is to manually edit the
value fields and re-save the MRs, the issue is then resolved.This will resolve the issue
SAP Note 1452700 - "New" button is disabled after
displaying text
Note Language: English Version: 1 Validity: Valid Since 03/25/2010
Summary
Symptom
In display mode you navigate via the text hyperlink to the text view.
When you navigate back, the "New" button on the "Notes" assignment block is
disabled. -
Satellite C660 - have problem using 4GB Ocz Rally2 Turbo memory stick
Hi,
Came a cross this tread [http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=217818|http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=217818]
Sorry my bad English,
So, I have 4GB Ocz Rally2 Turbo memory stick, and it won't mount in the computer. My other 1GB Fujitsu Siemens and 32GB Verbatim USB sticks work.
This is brand new, 2 weeks old laptop. And it seems to be a problem in the hardware.
Windows 7 64bit.
Should I just send it to Money Back repair/warranty ?!?!Hi JoneK,
Have you already tested this USB stick on another computer or notebook? Maybe the new USB stick is defective and so it doesnt work.
At the moment I doubt its a problem of your notebook because other USB sticks are working properly.
At least it could be a compatibility problem between USB stick and notebook but test it on another computer first. -
am using a spring bean (singleton) and this is how it looks like
public class MySingletonService {
private Map<String, List<TaskVO>> alerts = new HashMap<String, List<TaskVO>>();
//spring will call this method every 15 minutes
public void pollDatabase() {
//initialize the alerts instance variable and create/fill the alerts instance variable with new alerts for the employee(from database) .The key for the hashmap is the employee id
//some client code (e.g. GUI) will call this method to get the alert for the operator id.This can be called anytime to get the latest info from the alert Map
public List<TaskAlertVO> getOutstandingAlerts(String operatorId) {
return alerts.get(operatorId);
The issue here is that when getOutstandingAlerts is invoked by a thread,some other thread(Spring) calling the pollDatabase method might be updating the value.Please give me some idea and solution to get around this issue.
I was thinking of creating a copy of alerts instance variable in the getOutstandingAlerts method and then use the copy to find the key and return the alert for that operator id.This way we dont have to worry about data conflict.
Please adviceManjit wrote:
jtahlborn wrote:
if the pollDatabase() method is getting a complete new copy of the alerts every time, and the alerts map isn't being modified at all after load, then you can just:
- make the alerts member variable volatible
- create a new HashMap each time pollDatabase() is called, fill it in, and then assign it to the alerts member variable. Jtalhorn,I think I got your point.Basically you are suggesting that by creating a brand new map in each pollDatabase operation, then I dont have to worry about get operation ,simply because the client code is still looking at old memory location(old copy) and hence should not worry about values getting changes by pollDatabase method.
I got it.
But the small doubt is that why even I should bother about making the instance variable volatile ? Your suggestion should work without making it volatilebecause volatile ensures correct memory visibility between threads. if you didn't use volatile, then a caller to getOutstandingAlerts() could see some partially initialized/corrupt version of the map. -
MSI P67A-C43 (B3) & OCZ Vertex 3 VTX3-25SAT3 Issues
Specifications:
Quote
Mobo/Laptop: MSI P67A-C43 (B3)
BIOS: 1.B (2011-04-14)
CPU: Intel Core i5-2500K
RAM: 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 CML8GX3M2A1600C9B
Vid: ASUS ENGTX560 TI DCII TOP/2DI/1GD5 GeForce GTX 560 Ti
PSU: HX750 (CMPSU-750HX)
HDD: OCZ Vertex 3 VTX3-25SAT3-120G v2.11
Chipset: Intel P67 (B3) RSD v10.6.0.1002
OS: Windows 7 Ultimate 64 Bit SP1
Let's start from the beginning: So I built my PC in July and ever since I've been having on and off BSODs with the Vertex 3 drive. Mostly they'll happen once a week. When I first built the machine my drive came with Firmware 2.06. I installed all the drivers from MSI's website as well as the latest Intel Rapid Storage Drivers. Eventually I flashed the SSD to 2.11 when it was released but still had similar issues. Hotplugging was enabled when I installed Windows 7 for the first time AND when I flashed to 2.11 from 2.06. Some members over on the OCZ boards stated this might have been the cause of the BSOD. Basically the PC froze, BSOD'd, restarted, and then the system couldn't detect the drive. I had to power the system down, remove the power cable, wait 10 seconds, re-connect the cable and power on the PC. After I did this Windows booted normally.
I received some advice on the OCZ forums to reset CMOS and leave hotplugging disabled. Then re-flash the drive to 2.11 with hotplugging disabled. Some members thought this would make the drive act like an internal drive, not an external drive. However, a week after doing this the same BSOD appeared. I've started from scratch last week by secure erasing the drive and re-installing Windows, but same issues. I noticed MSI released a new BIOS for my board in July. I have the one from April currently.
Is it worth upgrading my BIOS? The listed fixes don't say anything about SSDs.
I plan on trying this when I get home from work:
Quote from: Tony;676791
Going to keep this brief and to the point, this hack will force the 2 primary sata2 or sata3 ports on the motherboards to be designated Internal only...You can do this hack for all Intel chipsets from around ICH8 onwards in win7 and Vista.
You also need to make sure hotplugging is disabled in uefi/bios if your boards bios has the option(s) do this first before you do any of these regedits etc
1 Remove all traces of Intel drivers on your system, that means remove the management engine driver, the RST driver and the INF driver, you do this thru the programs and features option in control panel. I remove them all before I reboot, the system will automagically set you using the MSAHCI driver.
2 Now reboot, let win7 detect the ssd and reboot again.
3 now open a elevated command window (CMD with administrator privileges) and copy/paste the following...then hit enter.
Code: [Select]
reg.exe add "HKLM\SYSTEM\CurrentControlSet\Services\msahci\Controller0\Channel0" /f /v TreatAsInternalPort /t REG_DWORD /d 0x00000001
Once you hit enter you can then add the following again using copy/paste.
Code: [Select]
reg.exe add "HKLM\SYSTEM\CurrentControlSet\Services\msahci\Controller0\Channel1" /f /v TreatAsInternalPort /t REG_DWORD /d 0x00000001
Hit enter and close CMD.EXE down, reboot
This will now force the 2 sata 3 ports to Internal only, this means they will apply LPM if you set it and will support Automatic Partial to slumber.
I now suggest you experiment with power schemes, for some high performance may work better than balanced...try both
You also need to make sure hotplugging is disabled in uefi do this first before you do any of these regedits etc
If you want to go a step further than this you can try the following...ONLY do this after you have done the steps above.
remove the SSD to start
1 create a temporary win7 install on a hdd, use the msahci driver and once installed do the hack to force the 2 ports to internal only. Have the hdd connected to port 1 on the motherboard.
2 once the install is ready and you have installed toolbox to it power down and connect the SSD to port 0
3 now boot to the HDD, use the manual boot menu option to make sure you are booting to the HDD and make sure hotplugging is OFF in UEFI
4 once in win7, flash the FW to the drive, when its finished flashing, close toolbox, reboot back to the HDD and back into win7...make sure the SSD is detected in my computer.
5 now power off, remove the HDD...then boot to UEFI and make sure to set the SSD as first boot device
6 Power up, boot to the SSD
Stay using the MSAHCI driver for now, do not install any INF, IME or RST drivers.
Edit 09/09/11
Had a few end users quoting disabling TRIM solved BSOD for them...now im not saying it will solve BSOD for all but it may be worth trying. Remember the SandForce controller was originally designed without TRIM in mind, it functions just fine without it so you should see no loss of performance. If you want to help the controller stay fast you could always add some extra over provisioning by reducing the volume on the drive and leaving that space unallocated...totally up to you what you do though....
I like 25% OP on my drives, this means if I have a 120 with 115GB showing in windows I lose 15GB to OP and use 100GB for the volume....
A forum member wrote a little script to enable /disable trim...he wrote in support for wiper for Indilinx drives also...just ignore that part and use the TRIM function only...
http://www.ocztechnologyforum.com/forum/showthread.php?63830-A-small-script-to-enable-disable-Trim
Here is a link to force TRIM also.. http://www.ocztechnologyforum.com/forum/showthread.php?73888-Here-s-a-tool-to-force-TRIM-your-entire-drive&p=523305&viewfull=1#post523305 you could if you wanted use this once a week to force the drive to TRIM all marked deleted blocks if you turn off native TRIM in win7.
Again....not saying this cures any BSOD but a few end users have said they disabled TRIM and issues went away...anything I have suggested here is totally reversible and will do no harm to your systems.
If this doesn't work and I get a BSOD after a week I'll disable TRIM and if that doesn't work I have no idea. OCZ said they're working on a new firmware release so who knows. I just hate feeling like I am a beta tester.
If anyone has any suggestions let me know.OK, had some time to go test your suggestions here
These are the 1.5V Vengeance RAM Modules. Tried installing 2 of the RAM on slots 2 and 4 on their own. System Boots Fine.
Went into the BIOS and changed the voltage applied to the RAM modules from
AUTO to 1.575V. On AUTO it says is applying 1.5V to the 2x 4GB modules.
Installed the full 4x RAM on all slots... and the system just shuts down. Power cycling again.
What do you think here? Bad Motherboard? Can't think of anything else to try... totally stumped!
Thanks! -
Exception while defining value attribute/View configuration issue
Hello,
I am facing an issue in view configuration. I have added value attributes to an existing context node in component BT116IT_SRVO, GenricItem view, BTADMINI context node. Now after adding the atrribute an exception is triggering as
"Cannot display view BT116IT_SRVO/GenericItem of UI Component BT116IT_SRVO
An exception has occurred Exception Class CX_SY_MOVE_CAST_ERROR - Source type \CLASS=CL_BSP_WD_MIXED_NODE is not compatible, for the purposes of assignment, with target type \CLASS=CL_CRM_BOL_ENTITY
Method: CL_CRM_UIU_BT_ITEMEOV_CN=>GET_QUANTITY
Source Text Row: 25 ".
I have checked source code of mentioned class, reference of CL_BSP_WD_MIXED_NODE class is coming after adding value attribute .
Exception is triggering at statement: lr_entity ?= current. => In current ref of CL_BSP_WD_MIXED_NODE class is coming while lr_entity is type ref to cl_crm_bol_entity.
I would really appriciate your reply on this as how can I avoid this exception? Do I need to redfine this method?
Moreover the value attributes that I have added does not appear in Available Fields in View Configuration. Could you help me out in how can I make these fields available in configuration?
Appriciate your replies on same.
Regards,
RashmiThe problem is solved.
Thanks
-Rashmi -
Can't boot Arch for installation. USB stick issue.
I got stuck. I tried to install arch on my dekstop, but booting Arch from USB stick freezes in same point, after running hooks. I tried with two usb sticks, new iso etc. Ubuntu was installed before without any problem from the same stick.
It freezes after showing:
Waiting 30 seconds for device /dev/disk/by-label/ARCH_201108 ...
[4.053579] sd 12:0:0:0: [sdb] No Caching mode page present
[4.053634] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[4.056259] sd 12:0:0:0: [sdb] No Caching mode page present
[4.059035] sd 12:0:0:0: [sdb] Assuming drive cache: write through
In some attempts I also got this:
ata_id[12376]: HDIO_GET_IDENTITY failed for '/dev/sdb': Invalid argumentProblem is sovled, but the solution is really courious.
In fact, there was no issue with usb stick. Display freezes on first showed lines and does not follow the rest. Arch booted successfully but I cannot notice that, because I still see first lines (messages from first post were just warnings). Switching FullHD, 16:9 monitor to old 3:4 display solved the problem.
It's really strange. Should I report it somewhere?
Last edited by 0xddr (2012-05-12 23:30:53) -
Updation of MCHB-CLABS value on Post Goods Issue through VL01n
When POsting Goods Issue I need to change MCHB-CLABS value.
My requirement:
When quantity left in the stock is less than (MCHB-CLABS) .005 I am adding the remaining quantity left to delivered quantity, but the stock (MCHB-CLABS) is not getting updated. It remains the same quantity less than .005.
Could you tell me any parameter in user exit which I need to modify?Hi,
VL01N has one BAdi called "DELIVERY_PUBLISH".
Why don't you use User exit for solving your problem?
Following are the user exits availble for the transaction:
V53W0001 User exits for creating picking waves
V53C0002 W&S: RWE enhancement - shipping material type/time slot
V53C0001 Rough workload calculation in time per item
V50S0001 User Exits for Delivery Processing
V50R0004 Calculation of Stock for POs for Shipping Due Date List
V50R0002 Collective processing for delivery creation
V50R0001 Collective processing for delivery creation
V50Q0001 Delivery Monitor: User Exits for Filling Display Fields
V50PSTAT Delivery: Item Status Calculation
V02V0004 User Exit for Staging Area Determination (Item)
V02V0003 User exit for gate + matl staging area determination (headr)
V02V0002 User exit for storage location determination
V02V0001 Sales area determination for stock transport order
VMDE0004 Shipping Interface: Message SDPACK (Packing, Inbound)
VMDE0003 Shipping Interface: Message SDPICK (Picking, Inbound)
VMDE0002 Shipping Interface: Message PICKSD (Picking, Outbound)
VMDE0001 Shipping Interface: Error Handling - Inbound IDoc
Regards,
Dharitree -
Hi,
How can I convert HEX value to CHAR value.
The Code in <b>non Unicode</b> system is:
DATA: t_text LIKE tline OCCURS 0 WITH HEADER LINE.
constants: c_hex_20a5(2) TYPE x VALUE '20A5'.
t_text-tdline = 'seller of the item so listed. A legend of the Seller Code(s) is as'.
TRANSLATE t_text-tdline USING c_hex_20a5.
The same code give error in <b>Uni-Code</b> system:
<b>error is "c_hex_20a5 must be an character type object (C, N, D, T or String type)."</b>
If anyone know, what is the solution, please let me know.
Thanks!
Puneet.Hi,
Try declaring the Hex chars using the ABAP char utilities. This is just a sample piece of code on how to declare and use:
CLASS cl_abap_char_utilities DEFINITION LOAD.
DATA: ws_lf TYPE c VALUE cl_abap_char_utilities=>cr_lf.
data: c_newline TYPE x VALUE '0D'. [ it is zero D, for carriage return ]
ws_lf = c_newline.
CONCATENATE it_tab-maktx
ws_lf
ws_template
INTO it_notificatn-template.
Hope this helps...
Regards
Subramanian -
Hi Techie !!!!
I have list object from DB inwhich i want compare a field in <logic:equal> Struts EL ....... I have written the following code.....
<%
List list = (List)request.getAttribute("AppointmentDetailNavigationList");
pageContext.setAttribute("list", list, pageContext.REQUEST_SCOPE);
%>
<body>
<ul>
<logic:iterate id="item" name="list" type="com.bean.AppoinmentInformation" scope="request">
<logic:equal property="rsc_name" value="rsc_name"> // This is for test only
*// Here i want compare rsc_name if comes two times in list i want come out of this scope....*
</logic:equal>
</logic:iterate>
</ul>
</body>
</html> My requirement is a field with duplicate, wanna come out of the scope from the list...
Any one help me out.....Wouldn't it be easier to use a Set which does not allow duplicates? That would nip the problem at the source rather than bringing it all the way to the jsp and not displaying it.
However if you have to have it this way, there is no easy way to break out of a loop in logic tags. Maybe some murky servlet code with a break command in scriptlets would do the trick, but you really have to scour the source code to confirm that.
cheers,
ram.
Edited by: Madathil_Prasad on Apr 26, 2010 1:00 PM -
Web service Task - Value pair as variable issue
firstly .. I not an .net Developer.
We have scenario in which I have a execute SQL task which sends a set of rows with two columns as an variable (object) to a for each loop container.The for each loop container has the web service task and each time it runs.
The web service task accepts allows/accepts a single variable but I need to provide the above two columns as pair to this complex type.....any help is appriciated....3rd ssis variable should be string.
The input variables have to be specified in the ReadOnlyVariables property. The output result variable has to be specified in the ReadWriteVariables property.
inside the script task
Dts.Variables("variable3").Value = Dts.Variables("variable1").Value.ostring() +Dts.Variables("variable2").Value.tostring();
Make sure before you are concatenating, both the values in the variable1 and variable2 should be string.
Thanks,
Anilkumar -
Value of package size issue with partner
Hi
Iam trying to configure idoc type in the partner, but when i try to save it, is giving the following error
"Please enter a value for package size".Hi Kalyan,
Check we20 (partner profiles) and the mode (in outbound) it it is collect you need top specify a size for package
Check this thread too
Re: ale/idoc setting
Regards
Suraj
Edited by: S.R.Suraj on Oct 12, 2009 12:09 PM -
Yesterday, I noticed that all my Stickies were deleted from my iMac (Snow Leopard). I checked my Stickies Database to see if I could recover any files, and that too was blank. I checked my Time Machine Backups and went through to the latest backup and found the files. Today, they disappeared again. I checked all my Time Machine Backups and all the Stickies Database files were also deleted. However, the Stickies file was found here http://tinypic.com/r/8vngpi/5 . I tried to move the file into the Backups.updb folder, but that didn't work either.
Any help with this matter would be greatly appreciated!Have you done a Repair Disk on both?
Can you look to see what is in that file?
Can you move it to your internal drive? -
Programmatic changes to textbox values won't stick...
Using BC4J I have created textboxes that are bound to the Oracle backend. When data is entered or edited manually the app sees the change and activates the save and rollback arrow icons.
Code behind my buttons can change the data in the bound textboxes but the changes don't cause the save and rollback icons to activate. If any controls on the page are then manually edited the programmatic changes disappear. I know this is because the mSomeAttribute.setText("somevalue") isn't connecting to the bound data sets (rowset ?) but I have been unable to find where/how to access such bindings.
I can see the in the *RowImpl.java methods the get<someattribute>() and set<SomeAttribute>() functions, but I am not able to access these 'accessors' in in the Form java script, only the constants that reflect the field nnumber for the attributes.
So, how do I connect programmatically to the attributes in a way that the modified data is seen by the bindings?You want to change the value in the view-row, not in the text box.
Certainly one way to get access to this (all from memory, so the method names might be slightly out) is to get the application module from the panelBinding and then find the view from the application module and then get the current row from the view. Er, i.e.
Row row = panelBinding.getApplicationModule().findViewObject("the-name-of-the-view-to-which-you-bound-the-control").getCurrentRow();
Then you can use the set / get methods you spoke about. (Strictly speaking, from the client-tier you should generally be using the Row interface rather than the RowImpl class.)
However, I wonder whether a more encapsulated way of getting access to the view-row is to start with the control and get the row via some ControlBinding or other. Only I'd have to dig around myself to work out how to do that so I'll leave it to someone else....
HTH
Mike. -
Multiple value in one column issue
Dear proffessionals,
i'm trying to put more than one value in one column, so i have next problem:
1. Query select cr_pjid from acc_users where username='ACCBTPS121' give result
CR_PJID
'26','63'2. Query select * from acc_accbtp_nova_view where ed_id=2 and to_char(pj_id) in ('26','63'); return 186 rows.
3. Query: select * from acc_accbtp_nova_view where ed_id=2 and
to_char(pj_id) in (select cr_pjid
from acc_users
where username='ACCBTPS121'); doesn't return any row... :(
Could anyone help me ?
Thx in advance,
AdnanAfter researching, I think that the best idea is to create another table with multiple rows and different values for one column...
[http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:210612357425|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:210612357425]
Maybe you are looking for
-
Event Handler Error while Creating User
Hi, I am not able to create users in OIM 11gR1 - " Event handler DemoNotificationEventResolver implemented using class/plug-in nrma.DemoNotificationEventResolver could not be loaded." I have deleted this plugin from the "plugins" table in the databas
-
Fact table to Dimension table ratio in RSRV
Hi all, I want to analyze how best the modeling is done, because I came to know that line item dimensions are not being used/designed at all, so want to know the ratio between fact to dim table. I read in some documentation that we can find that inf
-
Business Package for PLM Document Management by ECS
Is anyone using this business package? How did you go about obtaining this? I found a link to the company (in German) but gives no purchasing information. Does SAP have a similiar package that is available for download?
-
Is the "Slideshow" option removed from Action pull down menu in Leopard?
In Tiger, I had the ability to launch a quick slideshow from the Action pulldown menu. Did that get moved somewhere else? Or did Apple remove it from Leopard?
-
I have got MacKeeper adware and other junk on Safari. My Flash player won't work either. Can I uninstall Safari and reinstall it or is there an easier way to fix this?