NEO4 Plat/sli and the Active armor/network issues

Ok first of all my computer was running fine with my ethernet pluged into the primary nforce gig lan. After installing this software it worked for about 5 hours then just cut off my internet. I then plugged it into the Yukon pci-e gig lan and it worked then. After uninstalling this software i can no longer get a connection on my Nvidia lan. it connects but wont send/recieve any packets. Also windows will not even let me repair my connection without it locking up the network settings. If anyone can help i will appriecate it.
Andrew

no yellow marks in device manager the card says its working but i disabled it because it wouldnt work. i have the newest drivers and the most updated windows xp sp2.
Andrew

Similar Messages

Using the "silicon controller" on the MSI NEO4 PLAT SLI, quick question!

I have a stable OC w/ my FX55 (261x11) 2.87GHz, but now I want to use the Silicon Controller, and not just my NVIDIA controller. Does the MSI NEO4 PLAT SLI "LOCK" the silicon controller, so since my FSB is OC'ed, I dont want any problems.... By not using all 4 ports on the NVIDIA controller, will this maybe "relax" the nvidia controller, and not let it work so hard, or does it not matter. (overall speed wise)

Quote from: newls1 on 12-April-05, 08:06:00
I have a stable OC w/ my FX55 (261x11) 2.87GHz, but now I want to use the Silicon Controller, and not just my NVIDIA controller. Does the MSI NEO4 PLAT SLI "LOCK" the silicon controller, so since my FSB is OC'ed, I dont want any problems.... By not using all 4 ports on the NVIDIA controller, will this maybe "relax" the nvidia controller, and not let it work so hard, or does it not matter. (overall speed wise)
All of the PCI-E devices are locked, so that includes the SiI3132 controller and the Marvell Gigabit NIC. One note, it's best to use the SiI3132 "last". AnandTech did a benchmark of the two controllers, and the onboard nVIDIA controller was faster, although the 3132 PCI-E controller was much faster than the competitions use of PCI based SiI3112 controllers. If you've already used your nVIDIA controller for 4 SATA or SATA II devices, then by all means use the SiI3132 without overclocking fear.

Difference between K8N Neo4 Platinum/SLI and K8N-SLI Platinum

Hey guys.... I have one question and i hope you can help me.
I'm about to get an MSI SLI Platinum motherboard, but it seems that there are two versions, the K8N Neo4 Platinum/SLI and the K8N-SLI Platinum.
What is the real difference between them? As i can see in the manual, the Neo4 version has the additional SATA2 and Gbit LAN controller.
Anyone: Does your K8N-SLI board have 4 or 6 SATA2 ports? and 1 or 2 LANs?
At this picture http://www.midtdata.dk/asp/index.asp?varernr=K8N-SLI-PLAT&goto=productinfo&mainfunc=link I can see that there are 6 blue SATA connectors (lower right corner), and 2 LAN ports left to the LPT port... But the description says 4 SATA and 1 LAN, and so says the manual.
To all owners of this mobo: Does this picture look like your K8N-SLI Platinum or does it look like your K8N Neo4 Platinum/SLI ?

https://forum-en.msi.com/index.php?board=36.0
d/l a raid manual and all should be clear

Neo4 Plat SLI & geforce 8800 GTX

Can anyone confirm if the geforce 8800 GTX will run in a Neo4 Plat SLI? The last bios mentions support for the GX2's but no new updates for the 8800 series.

Quote from: Biggs25 on 17-November-06, 13:48:05
Can anyone confirm if the geforce 8800 GTX will run in a Neo4 Plat SLI? The last bios mentions support for the GX2's but no new updates for the 8800 series.
Tested it and it works You might have to fiddle around with the cooler a bit - There's a capacitor next to the PCIE slot wich is in the way
Only 1 card tho, you can't run SLI on this board as the 8800GTX requires a full x16 slot and won't work on a x8 slot
so x8 - x8 SLI won't work.

Can anyone explain this bizarre Neo4 plat/sli circumstance?

Just had mobo upgraded to Neo4 plat/sli. I only have IDE drives in the system currently. They are PHYSICALLY connected in this way:
IDE socket 1 cable
master - 80GB HDD, empty drive
slave - DVD burner
IDE socket 2 cable
master - 120GB HDD, OS installed here (WIN XP PRO SP2)
slave - 120GB HDD, data resides on this disk.
HOWEVER...
The drives are being recognized at bootup in this way:
Primary Master - 120GB HDD with OS (physically on IDE socket 2 as master)
Primary Slave - DVD Burner (physically on IDE socket 1 as slave)
Secondary Master - 80GB HDD (physically on IDE socket 1 as master)
Secondary Slave - 120GB HDD with data (physically on IDE socket 2 as slave)
Further, the WIN XP disk management utility shows the drives in a similar manner:
Disk 0 - 120GB w/ OS (drive C:)
Disk 1 - 80GB (no drive letter)
Disk 2 - 120GB w/ data (drive E:)
DVD burner - (drive D:)
How can this be? I thought that to show as primary master, a drive must be connected to IDE socket 1 as master? And how in the world can the Primary master and slave drives reside on two different IDE cables?
I didn't do this installation and cannot talk to the tech who did until Monday. FWIW, everything is working just fine. And it all appears to be jumpered properly. But before I go about the process of loading up all my software, etc., I feel a need to understand why this is happening. Is this a function of a bios setting that I can't find?
Can anyone help?
Thanks so much!

Well, in the first place welcome to the forum, secondly what you present it's correct, the system drive (OS drive) it has to always be the drive C: that's not a question of Master and Slave because if you go to the system properties you will see those drives as they are configured in the BIOS.
But for me that is a strange configuration....
Be well....

MOVED: K89 NEO4 PLAT/SLI Do I have to send it back?

This topic has been moved to AMD64 nVidia Based board.
K89 NEO4 PLAT/SLI Do I have to send it back?

No worries.
As for the Bios flash all you need to do with a newer core top get it to come up for posting or Bios Adjustments/Flashing is to use a single Stick of RAM. That forces the CPU's Memory Controller into single channel and that will get it done. If you try to post in dual channel with older Bios's that do not fully support a newer chip it will lock and you need then just to remove all RAM except from Slot 1 and reset the Bios as per your user manual.
No worries as it is not as hard as it sounds.

Neo4 plat SLI raid configuration

I made a striped raid config from my 2 160gig SATA drives in SATA 1 and 2. but when i tried to install windows on it, it didnt recognize the raid config and saw it as 2 seperate hard drives. I tried SATA ports 3 and 4. and it made no difference. then i tried 5 and 6. but it uses an old raid controller and it worked fine and i installed windows on it. BUT, im about to reformat and i want to use the newer raid controller. I have the MSI neo4 plat SLI mobo. But i saw that my mobo came with 2 floppys and i only installed 1 of the floppys during windows install... do i need to install both of them? I guess that might be why it didnt work... but can anyone assure me thats the problem? I didnt think i needed both of them...

Quote from: lupolian on 13-February-05, 06:09:50
I made a striped raid config from my 2 160gig SATA drives in SATA 1 and 2. but when i tried to install windows on it, it didnt recognize the raid config and saw it as 2 seperate hard drives. I tried SATA ports 3 and 4. and it made no difference. then i tried 5 and 6. but it uses an old raid controller and it worked fine and i installed windows on it. BUT, im about to reformat and i want to use the newer raid controller. I have the MSI neo4 plat SLI mobo. But i saw that my mobo came with 2 floppys and i only installed 1 of the floppys during windows install... do i need to install both of them? I guess that might be why it didnt work... but can anyone assure me thats the problem? I didnt think i needed both of them...
YOU HAVE TO INSTALL BoTH DRIVERS ON THE NVIDIA FLOPPY,THE RAID DRIVER AND THE MASS STORAGE DRIVER. HIT S TWICE TO DO IT. The other floppy is for the silicon image drivers,dont use it unless you use ports 5 and 6.

MOVED: Neo4 Plat/SLI + Winnie.. Is MSI a respectable company? How can I trust them now?

This topic has been moved to Overclockers & Modding Corner.
Neo4 Plat/SLI + Winnie.. Is MSI a respectable company? How can I trust them now?

It seems strange that after you simply swapped a heatsink that your mobo blanked out.
Fiirst, you should check to see if your power supply is still working.
Second, if you psu is working, you need to go to the simpliest setup....1 vid card, 1 hard drive, 1 floppy, 1 stick of ram, etc and see if you can boot...just my 2 cents.

K8N Neo4 Platinum SLI and BIOS goofiness

A couple nights ago I figured I'd flash my K8N Neo4 Platinum SLI to the latest BIOS version, since I hadn't touched it in over a year. I was using 3.1, and I decided to use the 3.A. Big mistake. Computer boots fine, but immediately bluescreens as soon as Windows tries to load. After diddling around on my brother's computer trying to make a bootable CD, I manage to get back to a state where I can flash again, and try the 3.7. Same problem...bluescreen on Windows startup. At that point I just gave up and went back to 3.1, ignoring the 3.3 and 3.2 BIOSes.
Is anyone else having issues trying to flash the more recent BIOSes?
(I just recently found out that MSI's US site doesn't have a complete list of available BIOSes, while the Taiwanese site does. I might have to give 3.9 and 3.8 a try.)
EDIT: My system specs are in the link in my sig.

Ok, quick update. I just spent about half an hour with 3.1, 3.2, 3.3, 3.4, 3.7, 3.8, 3.9, and 3.A. None of them work except 3.1...they all bluescreen while starting Windows. I made sure to clear the CMOS completely, yes I left APIC/MPS settings the same (they've always been on default so that hasn't been an issue), and I tried the various safe modes.
Here's the error code given on the BSOD: 0x0000007B (0xF78A6528, 0xC0000034, 0x00000000, 0x00000000)
A quick search on the 0x0000007B error code gives a fairly lengthy MS KB article, but no real solution. I'm at a loss as to why 3.1 works great but nothing else does.

SCCM report to show last logged on user and the Active Directory department attribute of that user.

I need to create an SCCM report to show last logged on user on all machines and the Active Directory department attribute of that last logged on user.

You problem is here.
right
join v_R_User USR on USR.ResourceID
= CS.ResourceID
USR.ResourceID != CS.ResourceID, you need to map the username to the user logon to the PC. By using the user’s department information you will
end up with unreliable results.
Anyways you need to make these changes to your query.
left
join v_R_User USR on USR.Unique_User_Name0
= CS.UserName0
http://www.enhansoft.com/

I'm trying to get rid of logmein. I threw away the entire application but I can't remove it form my overhead menu bar and the activity monitor tells me it's still running.

I'm trying to get rid of logmein. I threw away the entire application but I can't remove it from my overhead menu bar and the activity monitor tells me it's still running. How do I get rid of it completely?

Install it again and use the developers uninstall instructions
How to uninstall/install software on your Mac

Differences between the Portal Data Collector and the Activity Data Collect

Hello,
I want to know what are the differences between the Portal Data Collector and the Activity Data Collector?
Best Regards.
Pablo Mortera.

All of my SQL Server instances are sql server 2008r2 standard edition(10.50.2500). MDW is existing database, I try to setup collection sets for multiple instances and store data in one central MDW database
I create MDW in one instance, then run run configure Management Data Warehouse in target intance. collection sets were created successfully, but job failed with following error:
Executed as user: COCAD\INTDEPT01SQLAgentC10. The Management Data Warehouse version "00.00.0000.00" is not supported by the current data collector. Please upgrade the Management Data Warehouse by running the Management Data Warehouse Configuration
Wizard. Process Exit Code 5. The step failed.
Thanks
PAULqaz

Can I use firefox in webview? what is the package name and the activity name?

Can I use firefox in webview? what is the package name and the activity name?
I saw : intent.setClassName("com.tencent.mtt", "com.tencent.mtt.MainActivity");
but what is the name for firefox?

rahulmcadit wrote:
The phone is from UK and the carrier on which phone has been locked is "ORANGE". I want to use the same phone in India. I want to unlock the phone. Can you please suggest me what is the procedure to unlock the phone. How can I pay the amount to ORANGE carrier and can use my iphone in India.
Contact ORANGE to unlock it.
See this -> http://support.apple.com/kb/HT5014

ADF BC and the Active Data Service

hi
The OFM Fusion Developer's Guide for Oracle ADF 11g Release 1 (B31974-05) has a section "42 Using the Active Data Service"
at http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/adv_ads.htm
that says "... If you want your components to update based on events passed into ADF Business Components, then you need to use the Active Data Proxy. ..."
but it does not seem to explain how to use ADF BC and the Active Data Service.
I have been able to create this example application ...
http://www.consideringred.com/files/oracle/2010/ActiveDataServiceADFBCApp-v0.01.zip
... that does not have a af:poll component (but has moved polling into a managed bean).
<managed-bean>
    <managed-bean-name>sumSalBean</managed-bean-name>
    <managed-bean-class>activedataserviceadfbcapp.view.SumSalBean</managed-bean-class>
    <managed-bean-scope>session</managed-bean-scope>
    <managed-property>
      <property-name>empSumSalVO</property-name>
      <value>#{data.activedataserviceadfbcapp_view_sumSalPagePageDef.SumSal.viewObject}</value>
    </managed-property>
</managed-bean>This is some code in the SumSalBean class:
package activedataserviceadfbcapp.view;
// also based on code found in "ADF’s Active Data Service and scalar data (like activeOutputText)" by Matthias Wessendorf
// at http://matthiaswessendorf.wordpress.com/2010/01/07/adf%E2%80%99s-active-data-service-and-scalar-data-like-activeoutputtext/
public class SumSalBean
     extends BaseActiveDataModel
     protected static final String SUM_SAL_NAME = "sumSal";
     protected final AtomicInteger fCurrentChangeCount = new AtomicInteger(0);
     protected long fActiveDataUpdateEventTime;
     protected EmpSumSalVO fEmpSumSalVO = null;
     @PostConstruct
     public void setupActiveData()
          ActiveModelContext vActiveModelContext =
               ActiveModelContext.getActiveModelContext();
          Object[] vKeyPath = new String[0];
          vActiveModelContext.addActiveModelInfo(this, vKeyPath, SUM_SAL_NAME);
          ScheduledExecutorService vSEService = Executors.newScheduledThreadPool(1);
          vSEService.scheduleAtFixedRate(new Runnable()
                    public void run()
                         if (hasDataChanged())
                              triggerActiveDataUpdateEvent();
               3, // let's wait some seconds
               2, // period between the updates
               TimeUnit.SECONDS);
     public void triggerActiveDataUpdateEvent()
          setActiveDataUpdateEventTime(System.currentTimeMillis());
          incrementCurrentChangeCount();
          ActiveDataUpdateEvent vEvent =
               ActiveDataEventUtil.buildActiveDataUpdateEvent(
                    ActiveDataEntry.ChangeType.UPDATE,
                    getCurrentChangeCount(), new String[0], null,
                    new String[] { SUM_SAL_NAME },
                    new Object[] { getSumSal() });
          fireActiveDataUpdate(vEvent);
     public String getSumSal()
          EmpSumSalVO vEmpSumSalVO = getEmpSumSalVO();
          return "" + vEmpSumSalVO.getFirstSumSal();
     protected void startActiveData(Collection<Object> rowKeys,
          int startChangeCount)
     protected void stopActiveData(Collection<Object> rowKeys)
     public int getCurrentChangeCount()
          return fCurrentChangeCount.get();
     protected boolean hasDataChanged()
          EmpSumSalVO vEmpSumSalVO = getEmpSumSalVO();
          return vEmpSumSalVO.hasDataChanged(getActiveDataUpdateEventTime());
     public void setEmpSumSalVO(EmpSumSalVO pEmpSumSalVO)
          fEmpSumSalVO = pEmpSumSalVO;
}How all this behaves a runtime can be seen in this screencast
at http://www.screentoaster.com/watch/stUEpQSkxIR19aSV9YW1NRVF9W/activedataserviceadfbcapp_v0_01_zip_demo
I would welcome comments on how the example application in ActiveDataServiceADFBCApp-v0.01.zip can be improved, or references to information on how this should be done properly.
question
(q1) Where can I find some example code that does use ADF BC and the Active Data Service?
many thanks
Jan Vervecken

Jan,
ADF BC does not natively support ADF yet. Its planned for a next release. The only Data Control that out of the box support ADS is BAM. To use ADF BC with e.g. databae change notifications you
- create a shared AM
- Configure the VO to respond to database changes (check box)
- Configure the database to broadcast changes
- Use an af:poll component for the refresh because the update would be on the model layer only
So what is in the documentation is a doc bug. In the current releae you can use ADS best with a POJO model (that you use directly for dashboard use cases). You can though use a POJO data control, but this at the current stage would just act as a pass through for the data access.
See example 156 on http://blogs.oracle.com/smuenchadf/examples/ for how to do it with ADF BC
Frank
Ps.: Of course, the plan is to make everything working out of the box with no developer action required.
Edited by: Frank Nimphius on Feb 12, 2010 6:56 AM
Re-read your post. Maybe I need to revise my comment. Are you accessing AM directly or via the ADF layer. If the latter - I did not yet look at your sample - then this may work if you don't release the AM module you access directly (may not scale well)

Hello, today I am subscribed to photoshop CC but still has not passed and the activation of the post did not come serial number that do tell me?

Hello, today I am subscribed to photoshop CC but still has not passed and the activation of the post did not come serial number that do tell me?

creative cloud does not use a serial number. it uses your adobe id.
download the creative cloud desktop app (after signing in with your adobe id), Download Adobe Creative Cloud apps | Free Adobe CC trial
and use the desktop app to install your adobe creative cloud programs.
if you already have the cc desktop app and you need to refresh your adobe id, Sign in, Sign out | Creative Cloud desktop app

NEO4 Plat/sli and the Active armor/network issues

Similar Messages

Maybe you are looking for