Neo4/SLI doesn't recognize X2 3800+

Is it normal for the MSI BIOS and Windows XP (Properties of My Computer) to both say 'AMD Hammer Family processor - Model Unknown' when running an X2 3800+ in a MSI Neo4/SLI motherboard?
Does the processor still work at full capability this way?
My bios is the latest which is dated March/2005 which is the latest found on the MSI web site for this motherboard.
CPU-Z shows the Processor Name as AMD Athlon 64 X2 3800+ (E4) but the Specification shows 'AMD Hammer Family processor - Model Unknown'

Hi there,
March 1995 eh? that is surely the oldest BIOS on any Neo4!
If you meant March 2005, well there have been numerous BIOS updates since then. The latest non-beta BIOS is 3.8 dated Late Nov/Early Dec 2005.
The microcode for the new dual cored CPUs was included in the last 2 BIOS releases I believe...3.7 and 3.8. Anything older will not see the new CPU properly.
Update your BIOS but do not use the Auto download feature, download it and flash it by hand using a boot floppy (Win98 Boot floppy is ideal) and flash it from the ram drive that the boot floppy creates.
K6dude
PS, Make sure you are not overclocking the CPU or memory whilst flashing the BIOS!

Similar Messages

  • Newly Built System. MSI K8N Neo4/SLI Plat with AMD X2 3800 Crashing in all Games

    I just built this system yesterday..
    MSI K8N Neo4/SLI Plat with AMD X2 3800  latest BIOS 3.7 amd MB drivers
    I have a Albatron Geforece 7800 GT PCI-E 256Mgs with the latest Drivers. 78
    WINXP SP2 latest stuff.
    DirectX 9.0C
    I have 2 512 DDR3500 Memory Sticks.   
    SATA 160 Hard Drive
    DVD 8X NEC Burner
    All 3d games lok it up.  3DMark2001 SE locks it up too.
    I ran Memtest and everything passed fine.
    Anyway all 2d video works fine. but any 3d video screen goes black and the system locks up solid.
    Any help work be appriciated
    DaaDoctor

    Welcome to the forum DaaDoctor
    If you creat a signature (in profile) it will save you having to type your spec's  out each time or us looking for it. Use mine as a template.
    What PSU are you using ? Can you list the power output ? (writen on side of psu)
    Going from your specs you listed your graphics card is very hungery on power so I would suggest your psu isn't up to the job under load.
    Post the spec and we will know for sure.

  • WHAT BIOS SETTINGS FOR RAID 0 MSI NEO4 SLI-F-AMD 3800+MANCHESTER

    What are the M-Board settings for raid-0 I have 2 Seagate 7200.3 500gb drives MSI NEO4 SLI - f board and a AMD 3800+ Manchester. Thanks

    Setting up raid
    http://www.nvidia.com/object/feature_raid.html
    There are two guides here :
    Media Shield User's Guide  PDF
    RAID Floppy Disk Install  PDF
    Most things are covered in thees guides if running a nForce4 system.
     

  • Confused - whats the difference between K8N Neo4 SLI Platinum and Diamond??

    MSI web page says the Diamond has:
    "Silicon Image's SATA RAID supports another 2 SATA II ports. Transfer rate is up to 300MB/s."
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=638
    their Platinum page doesn't list the Silicone Image raid as a feature on the Platinum.
    I have K8N Neo4/SLI Platinum and it has the Silicone Image raid - I'm using it now. 
    Can anyone explain this? 
    Another question:  for both boards it shows:  "NV RAID (Software) - - RAID function available for ATA133 + SATA HD drives or 2 SATA HD"   
    How can the Raid fuction work for ATA133 drives since the cables for SATA and PATA are different?   What do the mean Raid for 133?
    Thanks!!!
    Tony

    https://forum-en.msi.com/index.php?board=36.0
    d/l a raid manual and all should be clear

  • Does k8n neo4/sli platinum support creative 6.1 surround speakers?

    I own an MSI k8n neo4/sli platinum mother board with an on-board SB live 24-bit sound chip. I have confirmed that the retail version of the sound blaster live 24-bit pci sound card will support a 6.1 speaker set up (specifically creative labs megaworks 650) with creative labs proprietary plug configuration of having front center, sub, and rear center speakers all on the same (orange) plug. The plug configuration on the back of the k8n neo4/sli platinum is color coded the same as the retail version of the sound blaster live 24-bit sound card. what I need to know is... Does the k8n neo4/sli platinum support a 6.1 surround sound speaker configuration? I can find no documentation in the literature confirming or denying this. FWIW... the creative sound card softwear that came with this motherboard will allow me to configure and test for 6.1 speakers... but I get no sound from my rear center speaker. On testing, the 5.1 speaker configuration works as it should but I am unable to test for 7.1 config as I lack a 7.1 speaker setup. I am using Version 5.12.1.356 of the creative drivers downloaded from the MSI driver support.
    Thanks for your time.
    Malpighi44
     

    Update...
     Last night I noticed that, in windows sounds and audio devices_advanced speaker settings, there is no 6.1 speaker configuration option. (GO to: control panel \sounds and audio devices \sounds and audio devices properties \ volume \speaker settings advanced \advanced audio properties \speakers \speaker setup pull down menu).
     I don't know if this pull down menu is generated by windows XP auto detection or the MSI/Creative drivers and .inf files that are installed for the SB 24-bit chip, but it leads me to believe that this MB does _not_ support 6.1 sound.
     Can anyone else confirm that this 6.1 speaker option is present or missing in windows with:
    1) This MB
    2) Windows XP in general
    or 3) if it is available to those that have an audigy or 6.1 compatible sound card
    Once again...
    Thanks for your time,
    Malpighi44
    My system:
    ANTEC SLK3000B ATX CASE
    ATHLON 64 3800+ NEWCASTLE
    MSI K8N NEO4 PLATINUM SLI
    OCZ PREMIER DDR PC3200 2X512MB
    2-MAXTOR MAXLINE III 250GB
    POWERCOLOR RADEON X800XL PCI-E 256MB VIVO
    ENERMAX EG495P-VE NOISETAKER 485W PS
    LITEON SOHW-1673S 16X8X16 DVD+RW
    LITEON SOHD-16T9S 16X DVD-ROM
    1.44MB 3.5IN FLOPPY
    WINDOWS XP PRO service pack 2

  • NOT Stable overclock on K8N Neo4 SLI Platinum 3.9 MOD + Venice 3000+

    Hi, to all the people that make this forum so usefull. 
    I´m wondering what i´m doing wrong? ??? ??? ???
    I have a Venice 3000+ E3 on a K8N Neo4 SLI Platinum and 1 Gb OCZ Rev2, TCCD.
    I have overclocked the CPU to 9 x 290 Mhz (2610Mhz) HTT 3X, MEM 1:1 290Mhz 2.5-4-3-10 1T 2.75V.
    Memory is ok at this setting on MEMTEST v1.65.
    I have tried Every VCORE possible to the CPU and Nforce Chipset and can´t make it stable.
    I can work on windows with this settings but some times the computer locks. >:(
    If any of you in the forum have a suggestion or recomendation, please Let me Know.
    For a list of complete hardware of my rig, look at the signature.
    Thank for all.
     

    I had this exact same problem, same RAM, same MOBO, with an X2 3800+.
    For some reason it wouldnt overclock 1:1, and that RAM at wouldnt run at 2.5-x-x-x-1T timings (and i dont think it did 2T stable for too long either). So i was limited to either 2 or 3.
    So right now I'm running my X2 at 2.55ghz and my OCZ Platinum 1gb TCCD @ 232(2-3-3-6-1T). Done so by using 183 divider at 255fsb. HTTmulti=3x
    Does dual prime 95 for 10-12 hours (havnt tried for longer)
    Oh also, for voltage, the RAM has 2.80-2.85, and NF4 gets 1.55-1.60v.

  • Itunes 10.6 doesn't recognize my iphone 4s 32gb, could you please help me?

    I bought an iPhone 4s 32gb from Singapore. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0013AC2C0E8DEF50
    Current user is an administrator.
    The current local date and time is 2012-06-12 20:13:12.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Tue Jun 12 19:48:36 2012
    Lease Expires:       Wed Jun 13 07:48:36 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.1.7 is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Well, you do not mention what computer OS you are using, so here are the support documents for both.
    Windows:     http://support.apple.com/kb/TS1538
    OS X:     http://support.apple.com/kb/TS1591

  • ITunes doesn't recognize either of my iPods

    I downloaded the latest update recently and since then iTunes doesn't recognize either of my two iPod touches (4th gen), even though the computer does. My iPad (1st gen) is still recognized normally. I tried uninstalling iTunes and reinstalling it several times, and that didn't work. The iPods are recognized by iTunes on other computers. The computer in question runs windows 8.1, if that makes a difference. From the look of these forums it looks like I'm not the only one who has this problem. Please help.

    Hi Tanskalinen,
    If you are having issues with iTunes not recognizing some of your devices on your Windows machine, you may find the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    After I reset my Ipod (deleted all data and settings) windows 7 doesn't recognize by ipod touch, and it doesn't appear in the itunes library or in the device menu, but it does charge. How can I get my computer to recognize it again?

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    My apple ID and password, recognized through out the Cloud, is not being recognized in the itunes store. I am signed into itunes.When I want to change something in my account, the sign in prompt comes up and doesn't recognize my PW

    Solved the problem. I had to allow cookies for safari and it run - as here: Re: itunes keeps asking for my apple id password. it's NOT entered incorrectly.

  • After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?

    After i plug in my iphone 5s, it always asks me to trust the laptop, i click trust and my laptop makes that noise as if I've pulled my phone out, but i haven't, so now my itunes doesn't recognize my phone, please please help me?
    THis also happened with my old iphone 4s
    I need help!

    Hi loist,
    Thanks for visiting Apple Support Communities.
    If your iPhone is not being recognized by your computer after you click "Trust," the troubleshooting steps found here can help:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jeremy

  • Tecra M4 - DVD drive doesn't recognize any disk under Vista

    Hi,
    after the installation of Vista my dvd drive doesn't recognize any disks !
    No upgrade from XP! It was a clean Vista installation.
    I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
    I tested the drive under XP it works fine and recognizes everything.
    Drivers are correctly installed no problems in the device manager is prompted.
    So i have no idea how to get it working, seems to be a Vista problem
    Could any one help me ? I'm really frustrated about this
    Thanks for your help

    Maybe this helps:
    - Remove the CD/DVD drive from the device manager.
    - Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    - Then reboot the notebook
    But what happens exactly? What disks are not recognized?

  • [Resolved] No boot with K8N sli Platinum & AMD 64 X2 3800+

    Hye,
    I've received these new stuff last night (everything is good until here) :
    - Antec Sonata II 450W
    - MB MSI K8N SLI Platinum
    - Proc. AMD 64 X2 3800+
    - GC Sapphire X800 XL 256Mo
    I've assembled all and turned it on... No bip... but all the fans are turning... and the screen says "No signal" and becomes black ( and me    )
    Can someone help me? Please?
    On the MSI site, I also found this :
    http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=641&kind=1
    Maybe the proc. and the Motherboard are not compatible? Has someone already tried this combinaison (MB+Proc.)?
    My Thanks in advance.

    Quote from: darinn on 12-November-05, 03:22:08
    I will ask the sellers if they can update the Mobo for me.
    But with the last version of the bios, will the mobo accept the dual-core with this proc. AMD 64 X2 3800+?
    And if it's not possible I'll change the mobo.
    Thanks .................................. again.
    Pretty much any SLI motherboard supports the X2 3800. MSI is just really pathetic sometimes. So, I had the Abit AN8 SLI before and their latest BIOS (17) supports all X2 CPUs. But Im sure most other brands support them too.

  • How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    How do I pair a bluetooth headset when my MAC doesn't recognize it? The hedset work properly because they are paired with my iPhone. The headset is not an Apple product. It'd 3rd party.

    Ask the headset manufacturer.
    Barry

  • This Question is at least 2.5 years old.  But still an issue.  I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7.  Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.

    iTunes does not use the .xml it uses the .itl
    If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one.

Maybe you are looking for