Neophyte needs help avoiding file name conflicts!
My companion and I share a single computer with a single copy of PSE7. We use nearly identical cameras (Fuji FinePix E series 510 and 550). Both cameras use the same system for assigning file names. As a consequence when we up load from our respective cards and the names are the same for different photos only the first in goes into the organizer. We have just discovered the problem. I'm embarrassed to admit the discovery comes almost four and one half years late. I had tried to create stand-by copies to CD but the same problem may exist there.
Can I massage the file names to distinguish "his from hers". If so at what point. What can I do about making the same discrimination with the photos already on the hard drive? Perhaps Bob... as opposed to Katie...?
Any help at all will be greatly appreciated. I'm now sitting on two 1G cards for my camera and one for hers trying to determine how to handle the problem.
Thanks,
ibbobby
Hi,
Use APD to download photos from your cameras, and while downloading specify the Rename Files option (Probably Bob_<ShotDate>).
This will create unique file names and all the files will then get imported into Organizer.
Alternatively, if you have only jpeg files, you can stamp the file with Author/Copyright metadata in APD. When this value is provided, all the files with get imported in Organizer.
Thanks/Tarun
Similar Messages
-
Need help getting files names from directory
I have never done anything in php before and I'm struggling.
In an attempt to search through potential document names in a directory, I've added the following code to a new php document:
<?php
if ($handle = opendir('.')) {
while (false !== ($file = readdir($handle))) {
if ($file != "." && $file != "..") {
echo "$file\n";
closedir($handle);
?>
with no luck. When executed all I get is a blank screen. Any ideas why?
End goal is to list the file names in the directory so that the user can choose to open desired document. Thanks!Click here and pick the option which best fits your situation.
(93771) -
I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?
The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
Matt -
frnds,
Im using the FM "KD_GET_FILENAME_ON_F4" to get F4 help for file name in presentation server... but it does not seem to work...Y?????????
and is there any FM to get the file name from the application server..
points assured to all the answers...
regrds,
Madan...Try to use WS_FILENAME_GET
call function 'WS_FILENAME_GET'
exporting def_filename = space
def_path =
mask = ',. ,..'
mode = 'O'
title = text-038
importing filename = os_name
RC = DUMMY
exceptions inv_winsys = 04
no_batch = 08
selection_cancel = 12
selection_error = 16.
or
at selection-screen on value-request for p_file1.
data wa_file like file_table.
refresh filetable.
call method cl_gui_frontend_services=>file_open_dialog
EXPORTING
WINDOW_TITLE =
DEFAULT_EXTENSION =
DEFAULT_FILENAME =
FILE_FILTER =
INITIAL_DIRECTORY =
MULTISELECTION =
WITH_ENCODING =
changing
file_table = filetable
rc = rc
USER_ACTION =
FILE_ENCODING =
exceptions
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
others = 5.
if sy-subrc = 0.
if rc = 1.
read table filetable into wa_file index 1.
move wa_file-filename to p_file1.
endif.
endif.
Max
Message was edited by: max bianchi -
Revision: 20587
Revision: 20587
Author: [email protected]
Date: 2011-03-03 14:11:37 -0800 (Thu, 03 Mar 2011)
Log Message:
update the echoService destination name to qa.axis.EchoService to avoid a name conflict in ria package.
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/WEB-INF/flex/proxy-config.mods.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/dataTypesTest/p roxy-config.xml -
Revision: 3512
Author: [email protected]
Date: 2008-10-07 13:28:56 -0700 (Tue, 07 Oct 2008)
Log Message:
rename flex4 mx.effects.easing to mx.effects.fxEasing to avoid a name conflict in the framework
Modified Paths:
flex/sdk/trunk/frameworks/gumbo-manifest.xml
flex/sdk/trunk/frameworks/mxml-2009-manifest.xml
flex/sdk/trunk/frameworks/projects/flex4/manifest.xml
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/Animation.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/FxAnimate.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/FxAnimateFilter.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/FxAnimateInstance.a s
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/fxEasing/Constant.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/fxEasing/EaseInOut.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/fxEasing/IEaser.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/fxEasing/Linear.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/fxEasing/Power.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/fxEasing/Sine.as
Added Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/fxEasing/
Removed Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/easing/
flex/sdk/trunk/frameworks/projects/flex4/src/mx/effects/effectClasses/CallAction.asThats good news.
-
Need Help With File Matching Records
I need help with my file matching program.
Here is how it suppose to work: FileMatch class should contain methods to read oldmast.txt and trans.txt. When a match occurs (i.e., records with the same account number appear in both the master file and the transaction file), add the dollar amount in the transaction record to the current balance in the master record, and write the "newmast.txt" record. (Assume that purchases are indicated by positive amounts in the transaction file and payments by negative amounts.)
When there is a master record for a particular account, but no corresponding transaction record, merely write the master record to "newmast.txt". When there is a transaction record, but no corresponding master record, print to a log file the message "Unmatched transaction record for account number ..." (fill in the account number from the transaction record). The log file should be a text file named "log.txt".
Here is my following program code:
// Exercise 14.8: CreateTextFile.java
// creates a text file
import java.io.FileNotFoundException;
import java.lang.SecurityException;
import java.util.Formatter;
import java.util.FormatterClosedException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class CreateTextFile
private Formatter output1; // object used to output text to file
private Formatter output2; // object used to output text to file
// enable user to open file
public void openTransFile()
try
output1 = new Formatter("trans.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
output2 = new Formatter("oldmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openOldMastFile
// add transaction records to file
public void addTransactionRecords()
// object to be written to file
TransactionRecord record1 = new TransactionRecord();
Scanner input1 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0) and amount.","? ");
while (input1.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record1.setAccount(input1.nextInt()); // read account number
record1.setAmount(input1.nextDouble()); // read amount
if (record1.getAccount() > 0)
// write new record
output1.format("%d %.2f\n", record1.getAccount(), record1.getAmount());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input1.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0) ",
"and amount.","? ");
} // end while
} // end method addTransactionRecords
// add account records to file
public void addAccountRecords()
// object to be written to file
AccountRecord record2 = new AccountRecord();
Scanner input2 = new Scanner(System.in);
System.out.printf("%s\n%s\n%s\n%s\n\n",
"To terminate input, type the end-of-file indicator",
"when you are prompted to enter input.",
"On UNIX/Linux/Mac OS X type <ctrl> d then press Enter",
"On Windows type <ctrl> z then press Enter");
System.out.printf("%s\n%s",
"Enter account number (> 0), first name, last name and balance.","? ");
while (input2.hasNext()) // loop until end-of-file indicator
try // output values to file
// retrieve data to be output
record2.setAccount(input2.nextInt()); // read account number
record2.setFirstName(input2.next()); // read first name
record2.setLastName(input2.next()); // read last name
record2.setBalance(input2.nextDouble()); // read balance
if (record2.getAccount() > 0)
// write new record
output2.format("%d %s %s %.2f\n", record2.getAccount(), record2.getFirstName(),
record2.getLastName(), record2.getBalance());
} // end if
else
System.out.println("Account number must be greater than 0.");
} // end else
} // end try
catch (FormatterClosedException formatterClosedException)
System.err.println("Error writing to file.");
return;
} // end catch
catch (NoSuchElementException elementException)
System.err.println("Invalid input. Please try again.");
input2.nextLine(); // discard input so user can try again
} // end catch
System.out.printf("%s %s\n%s", "Enter account number (> 0),",
"first name, last name and balance.","? ");
} // end while
} // end method addAccountRecords
// close file
public void closeTransFile()
if (output1 != null)
output1.close();
} // end method closeTransFile
// close file
public void closeOldMastFile()
if (output2 != null)
output2.close();
} // end method closeOldMastFile
} // end class CreateTextFile--------------------------------------------------------------------------------------------------
// Exercise 14.8: CreateTextFileTest.java
// Testing class CreateTextFile
public class CreateTextFileTest
// main method begins program execution
public static void main( String args[] )
CreateTextFile application = new CreateTextFile();
application.openTransFile();
application.addTransactionRecords();
application.closeTransFile();
application.openOldMastFile();
application.addAccountRecords();
application.closeOldMastFile();
} // end main
} // end class CreateTextFileTest-------------------------------------------------------------------------------------------------
// Exercise 14.8: TransactionRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
public class TransactionRecord
private int account;
private double amount;
// no-argument constructor calls other constructor with default values
public TransactionRecord()
this(0,0.0); // call two-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public TransactionRecord(int acct, double amt)
setAccount(acct);
setAmount(amt);
} // end two-argument TransactionRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set amount
public void setAmount(double amt)
amount = amt;
} // end method setAmount
// get amount
public double getAmount()
return amount;
} // end method getAmount
} // end class TransactionRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: AccountRecord.java
// A class that represents on record of information
package org.egan; // packaged for reuse
import org.egan.TransactionRecord;
public class AccountRecord
private int account;
private String firstName;
private String lastName;
private double balance;
// no-argument constructor calls other constructor with default values
public AccountRecord()
this(0,"","",0.0); // call four-argument constructor
} // end no-argument AccountRecord constructor
// initialize a record
public AccountRecord(int acct, String first, String last, double bal)
setAccount(acct);
setFirstName(first);
setLastName(last);
setBalance(bal);
} // end four-argument AccountRecord constructor
// set account number
public void setAccount(int acct)
account = acct;
} // end method setAccount
// get account number
public int getAccount()
return account;
} // end method getAccount
// set first name
public void setFirstName(String first)
firstName = first;
} // end method setFirstName
// get first name
public String getFirstName()
return firstName;
} // end method getFirstName
// set last name
public void setLastName(String last)
lastName = last;
} // end method setLastName
// get last name
public String getLastName()
return lastName;
} // end method getLastName
// set balance
public void setBalance(double bal)
balance = bal;
} // end method setBalance
// get balance
public double getBalance()
return balance;
} // end method getBalance
// combine balance and amount
public void combine(TransactionRecord record)
balance = (getBalance() + record.getAmount());
} // end method combine
} // end class AccountRecord -------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatch.java
import java.io.File;
import java.io.FileNotFoundException;
import java.lang.IllegalStateException;
import java.util.NoSuchElementException;
import java.util.Scanner;
import java.util.Formatter;
import java.util.FormatterClosedException;
import org.egan.AccountRecord;
import org.egan.TransactionRecord;
public class FileMatch
private Scanner inTransaction;
private Scanner inOldMaster;
private Formatter outNewMaster;
private Formatter theLog;
// enable user to open file
public void openTransFile()
try
inTransaction = new Scanner(new File("trans.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openTransFile
// enable user to open file
public void openOldMastFile()
try
inOldMaster = new Scanner(new File("oldmast.txt"));
} // end try
catch (FileNotFoundException fileNotFoundException)
System.err.println("Error opening file.");
System.exit(1);
} // end catch
} // end method openOldMastFile
// enable user to open file
public void openNewMastFile()
try
outNewMaster = new Formatter("newmast.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openNewMastFile
// enable user to open file
public void openLogFile()
try
theLog = new Formatter("log.txt");
catch (SecurityException securityException)
System.err.println("You do not have write access to this file.");
System.exit(1);
} // end catch
catch (FileNotFoundException filesNotFoundException)
System.err.println("Error creating file.");
System.exit(1);
} // end method openLogFile
// update records
public void updateRecords()
TransactionRecord transaction = new TransactionRecord();
AccountRecord account = new AccountRecord();
try // read records from file using Scanner object
System.out.println("Start file matching.");
while (inTransaction.hasNext() && inOldMaster.hasNext())
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
account.setAccount(inOldMaster.nextInt()); // read account number
account.setFirstName(inOldMaster.next()); // read first name
account.setLastName(inOldMaster.next()); // read last name
account.setBalance(inOldMaster.nextDouble()); // read balance
if (transaction.getAccount() == account.getAccount())
while (inTransaction.hasNext() && transaction.getAccount() == account.getAccount())
account.combine(transaction);
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
transaction.setAccount(inTransaction.nextInt()); // read account number
transaction.setAmount(inTransaction.nextDouble()); // read amount
else if (transaction.getAccount() != account.getAccount())
outNewMaster.format("%d %s %s %.2f\n",
account.getAccount(), account.getFirstName(), account.getLastName(),
account.getBalance());
theLog.format("%s%d","Unmatched transaction record for account number ",transaction.getAccount());
} // end while
System.out.println("Finish file matching.");
} // end try
catch (NoSuchElementException elementException)
System.err.println("File improperly formed.");
inTransaction.close();
inOldMaster.close();
System.exit(1);
} // end catch
catch (IllegalStateException stateException)
System.err.println("Error reading from file.");
System.exit(1);
} // end catch
} // end method updateRecords
// close file and terminate application
public void closeTransFile()
if (inTransaction != null)
inTransaction.close();
} // end method closeTransFile
// close file and terminate application
public void closeOldMastFile()
if (inOldMaster != null)
inOldMaster.close();
} // end method closeOldMastFile
// close file
public void closeNewMastFile()
if (outNewMaster != null)
outNewMaster.close();
} // end method closeNewMastFile
// close file
public void closeLogFile()
if (theLog != null)
theLog.close();
} // end method closeLogFile
} // end class FileMatch-------------------------------------------------------------------------------------------------
// Exercise 14.8: FileMatchTest.java
// Testing class FileMatch
public class FileMatchTest
// main method begins program execution
public static void main( String args[] )
FileMatch application = new FileMatch();
application.openTransFile();
application.openOldMastFile();
application.openNewMastFile();
application.openLogFile();
application.updateRecords();
application.closeLogFile();
application.closeNewMastFile();
application.closeOldMastFile();
application.closeTransFile();
} // end main
} // end class FileMatchTest-------------------------------------------------------------------------------------------------
Sample data for master file:
Master file
Account Number Name Balance
100 Alan Jones 348.17
300 Mary Smith 27.19
500 Sam Sharp 0.00
700 Suzy Green -14.22Sample data for transaction file:
Transaction file Transaction
Account Number Amount
100 27.14
300 62.11
300 83.89
400 100.56
700 80.78
700 1.53
900 82.17 -------------------------------------------------------------------------------------------------
My FileMatch class program above has bugs in it.
The correct results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 173.19
500 Sam Sharp 0.00
700 Suzy Green 68.09The correct results for the log.txt:
Unmatched transaction record for account number 400Unmatched transaction record for account number 900------------------------------------------------------------------------------------------------
My results for the newmast.txt:
100 Alan Jones 375.31
300 Mary Smith 111.08
500 Sam Sharp 0.00
700 Suzy Green -12.69My results for the log.txt
Unmatched transaction record for account number 700-------------------------------------------------------------------------------------------------
I am not sure what is wrong with my code above to make my results different from the correct results.
Much help is appreciated. Please help.From the output, it looks like one problem is just formatting -- apparently you're including a newline in log entries and not using tabs for the newmast output file.
As to why the numbers are off -- just from glancing over it, it appears that the problem is when you add multiple transaction values. Since account.combine() is so simple, I suspect that you're either adding creating transaction objects incorrectly or not creating them when you should be.
Create test input data that isolates a single case of this (e.g., just the Mary Smith case), and then running your program in a debugger or adding debugging code to the add/combine method, so you can see what's happening in detail.
Also I'd recommend reconsidering your design. It's a red flag if a class has a name with "Create" in it. Classes represent bundles of independant state and transformations on that state, not things to do. -
File name conflict in File Download filter in Policy Studio
Hi,
I am trying to use File Download filter to download the file from sftp server and saving it on local machine using Save to File filter. File format is ABC_MMDDYYYY,zip
i need to get the name of the file at run time. what would be Attribute Selector i should use in File Download filter for File name. I tried ABC_${date}
but its not able to understand that format. i tried lot nothing seems to be working.
Please help.i am Getting Auth Fail error in trace logs when creating Policy for SFTP File Download and Saving it.
Problem Description
Getting Auth Fail error in trace logs when creating Policy for SFTP File Download and Saving it on server.
Steps to Reproduce
1. Create a policy with Add HTTP Header and FileDownload filter with SFTP server details (need to specify fingerprint)
2.Add Save to File filter with correct path and file name.
3.Add scheduler that runs after every 20 sec
4.Verify file at Save location and check trace logs. -
Need to validate file Name,split the file name and store the splited values into Variables
Dear All,
Below is the my requirement.
I have a folder, in that folder I have bunch of text files. The file name is below format
ACA_122_pay_20140430_001
Initially the file name start with ACA code,groupid,group name and date time stamp. This is the standard structure of file name.
I want to check each and every file in the folder with this structure. The structure should be standard for all the files. If the structure same for all files I need to get codes form file name. For example
If you see the below file name, I need to get ACA and put into variable,I need to get 122 and put into variable. For group name and date time needs to put in variable.
If the file format is not valid state then I need to log exception.
Let me know if I am not clear.
Kindly provide the C# code for achieving the above requirement.
As I am new to .net programming. kindly help me.
Thanks in Advance,
Regards,
Madhava Ganji
Madhava GanjiHi MadhavaGanji,
I have post how to validate the file name, header row against definition table which stored the file name and column definition.
Take a look and see if this is helpful.
http://sqlage.blogspot.com/2013/11/ssis-validate-file-header-against.html
http://sqlage.blogspot.com/ -
Save a string to a file ...my file need a particular file name (time, date, etc)
hello to all,
i have to save a file with a string..,with results of a test
the file name must include time and date of my test, and has to append 2 underscore if my test failed
some idea?
Using LabVIEW 7.1gigi85 wrote:
for months i need abbreviation of name JAN, FEB and so on
It is all right there in the online help: time format strings.
In this case use <%b> and optionally convert it to upper case.
LabVIEW Champion . Do more with less code and in less time . -
Need to reference file name within the XML Output
Not sure if this is possible, as I'm new to the livecycle/XML world. But I need to be able to reference a file within the XML output from the PDF.
The Scenario is that a pdf form of a business card will be issued to 50 franchisees for them to type in their names and mobiles, click submit and the XML file to be sent to myself, and be imported in to InDesign populating their data ready for printing. Up to here I have it working perfectly.
However as each franchisee have a combination of up to 5 logos to place in the bottom corner to save having to have various templates with different combinations of logos and having to ensure the correct templates are used. I intend to reference each companies combination as an EPS and make the reference within the xml out and have it import directly in with the other data. I can type the code directly within the xml but I would like to have the form reference it directly in the xml output. Is this possible or am expecting to much of livecycle? Any help/advice greatly appreciated.
DavidHi MadhavaGanji,
I have post how to validate the file name, header row against definition table which stored the file name and column definition.
Take a look and see if this is helpful.
http://sqlage.blogspot.com/2013/11/ssis-validate-file-header-against.html
http://sqlage.blogspot.com/ -
PHP disaster with entropy installation need help with file location
I have a mac mini snow leopard server running 10.6.5 ,and I was trying to resolve a mcrypt module issue so that I could install wordpress and magento on some of our sites.After doing what I thought was extensive research, I decided to download the entropy php 5.30-3pkg from Marc Liyanage since it was already compiled and had an automatic install.I had the xcode tools installed and was going to attempt to compile it myself,but did not quite understand the instructions on Michael Gracie's site.When I installed the entropy package it told me that i needed to first disable the existing module,and I attempted to uncheck the php5 module,with no luck,as every time I tried to save it it rechecked itself,which I later discovered was happening because of dependency issues, as I had the mail,wiki,etc services on the sites checked. So my problem is that I wasn't aware at the time of the dependency issue,and I just renamed the module and the file name by putting a # in front of both (Inside the server admin dialog box through the pop up window).I didn't think it would hurt since is was going to be disabled,but now i get blank pages when trying to connect,and can't even see a test.php file, nor can I even locate where they say:
software is supposed to be installed into a new directory /usr/local/php5 on my boot volume. If you ever want to get rid of the package, you only have to remove this directory and a symbolic link called +entropy-php.conf in either /etc/apache2/sites or /etc/apache2/other, depending on whether you run OS X Client or Server.
Any help would be appreciated !Thank you so much, that works just like i wanted it to as it downloads the file but then i have the problem of the file being called firename.png (or whatever i put in there instead)
using this i changed the code and made it this instead which works 100%
set download to text returned of (display dialog "Enter IGN" default answer "" buttons {"Download", "Cancel"} default button 1)
set the destination to (choose folder)
do shell script "curl -L http://minecraft.net/skin/" & download & ".png" & " -o " & quoted form of ((POSIX path of the destination) & download & ".png")
so i used the input name again with download and added a .png for the extention and now it downloads the file to the locaiton i specify with the name of the user im entering with the correct exention, 100% awesome ^^
Thank you everyone who help me with that issue, grately appreshiated -
i have a brand new MuVo n200
i need help, i put my cd's in and everyhting and i filled it with songs ans i can play them and everything, but i hate thats itssorted in ABC order. i cannot figure how to put them so it is in order by the CD or the bandname.
please help.
message me on aim if you want [email][email protected]][email protected][/url]To group the songs into albums or artist groups, I would definitely suggest putting all the tracks from each album/group in its own folder on your PC and put the folder on the muvo in just the same way as you would put a single mp3. The player (in normal play mode) will then play each folder all the way through before moving on to the next one alphabetically (or numerically, if you put numbers at the start of the folder names) and you can then use 'skip folder' to skip through to find the particular album or artist you're looking for. Play around with the shuffle modes too - you can shuffle within folders or just shuffle everything if you want.
Tracks will normally be played alphabetically. To get them to play in order of track number, put numbers at the beginning of each file name. E.g.: file 'examplesong.mp3' would become '0_ examplesong.mp3' If you've got tonnes of songs and you're worried about it taking ages, the computer will do it for you! Click on 'my computer', then click on 'Muvo N200 media explorer'.. This shows the contents of your player. Choose a folder to reorder the songs in and click on it to display the songs. In the pictures along the top of the window, 4th from the right is an icon with a downward facing arrow and an A above a Z. Click on this, it's called 'custom sort'. You can then use the arrows at the bottom to change the order of your tracks to how you want them. Click OK, and they'll all be numbered in that order!
For instructions on how to create folders in mediasource, read the thread in this link:
http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=926
I don't think you can put folders within folders in the muvo, but just the one layer really helps organisation.
Hope that helps!
x Flaneur
PS- scroll down in the thread in the link: Jeremy CL was nice enough to give pictures in his instructions! If you'd like more help, type 'create folders' or something into the forum search as there's probably quite a lot of advice kicking about here!Message Edited by flaneur on 03-27-2005 :8 PM -
[JS] Need Help Removing File extension (in CS2 and CS3)
Hello All.
I have a menu in a dialog that needs to list some file names, but without their file extensions (which will always be .txt in my case). The following is some code that successfully does this in CS3, but I also need it to work in CS2. Do you have any other ways to do this? One code that works in both versions (CS2 and CS3) is ideal.
myNameWithoutExtensionFunction = function( myNameWithExtention ) {
myNameWithoutExtension = myNameWithExtention
myEndOfFileName = myNameWithoutExtension.lastIndexOf( "." ) // get the last period (.) in the filename
if ( myEndOfFileName > -1 ) {
myNameWithoutExtension = myNameWithoutExtension.substr( 0, myEndOfFileName )
return myNameWithoutExtension
Thanks in advance.
DanI realized my mistake. The above code works just fine in CS2. My mistake was elsewhere. The name I was sending to this function wasn't being recognized by CS2. Once I corrected that and sent a valid name to this function it worked. So in case someone needs to remove file extensions, feel free to use the above function!
-
Need help for file upload - reposted for Steve Muench
Hi Steve,
I have been involved developing a web application that requires a file upload operation. I have studied your example on Upload Text File and Image Example in the Not Yet Documented ADF Sample Applications section. I got the file upload part worked but could not get the original file name to populate the name field..i.e. if I upload myFile.txt to the database, the name field will be myFile.txt (not the name enter by user). Is there a way to capture the filename info? or is it possible to do so within ADF framework? I am using ADF/Struts/JSP with ORDDoc data type. Thanks very much.
BillHello Nani,
You need to change any settings in 'FILE' transaction. This transaction is used to set up Logical file paths. ( In general it will be set already for your system).
You can use the following code.
DATA: LC_LOGICAL_FILENAME_EXPSRC LIKE RCGIEDIAL-IEFILE
VALUE 'EHS_IMP_SOURCES'.
DATA: L_EMERGENCY_FLAG TYPE C.
DATA: L_FILE_FORMAT LIKE FILENAME-FILEFORMAT.
data : X_RCGIEDIAL LIKE RCGIEDIAL occurs 0 with HEADER LINE.
read the default pathname on application server
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
LOGICAL_FILENAME = LC_LOGICAL_FILENAME_EXPSRC
OPERATING_SYSTEM = SY-OPSYS
parameter_1 = ' '
PARAMETER_2 = ' '
USE_PRESENTATION_SERVER = ' '
WITH_FILE_EXTENSION = ' '
USE_BUFFER = ' '
IMPORTING
EMERGENCY_FLAG = L_EMERGENCY_FLAG
FILE_FORMAT = L_FILE_FORMAT
FILE_NAME = X_RCGIEDIAL-IEFILE
EXCEPTIONS
FILE_NOT_FOUND = 1
OTHERS = 2.
write :/ 'file format', L_FILE_FORMAT,
/ 'file name', X_RCGIEDIAL-IEFILE.
Thanks,
Jyothi
Maybe you are looking for
-
I download apps but they do not show up on home screen.
on app store they say downloaded. i have tried restarting, logging out/in. everything. any ideas? this has happened to multiple apps.
-
Hi All The Long Range Requirements report (MD47) visible via the portal for suppliers. It is showing in weekly buckets instead of periods(Months). The portal side has no problem, but that some configuration or setting must have changed in SAP ERP ,
-
By default, the system generated mailbox comes from sender “Microsoft Outlook” like the screen shoot below .Sometimes we might need to change the display name of the system generated mailbox because of some reasons. The simplest way to change the fie
-
Unable to write more than 10 case statements in an object in designer
unable to write more than 10 case statements in an object in designer XI 3.0 and XI 3.1 Please let me know, any known issues.
-
JSP 2.0 on OAS 10g R2 (10.1.2.0.2)
I am wondering if it is possible to update the JSP spec of OAS to use 2.0 instead of 1.2. We were starting to develop on 10.1.3 but had to push back to the lower version because of customer requirements. I was wonder if there was a way to do this to