NES Plugin and Page cannot be displayed

As soon as we start using the Netscape Plugin with our clustered
environment, we start seeing the 'Page cannot be displayed' error quite
often. Does anyone have any idea if there's any tuning that we can do
to alleviate this? This is even happening if there's only one person in
the app. I'd really appreciate any suggestions at all.
Thanks in advance,
Lynn

Hi RAdha,
CRSJavaAdmin.exe is controlled by UCCX node manage servicer, Can you go to the serviceability tool (start - programs - Cisco unified CCX administrator - Cisco Unified CCX serviceability ) and in process ACtivation tab make sure all the services aren enabled specialy "cisco unified CCX administrator" if not enable it and restart the node manager service from the services menu
Hope this helps
Thank you
Anuj

Similar Messages

Work managers threads constraint and page cannot be displayed

Hi,
We have a memory intensive processing for certain functionality and we would like to limit the number of parallel requests to process these requests. We are able to acheive configure by using "Work Managers" in WebLogic and putting a limit on the number of threads for that servlet.
For example, if we put maximim thread limit as 3, then if there are 10 parallel requests; 7 requests are in queue. There could be situations where these the requests waiting in queue could take up to 30-40 minutes to be processed.
We are observing that some times we get page cannot be displayed after 15 mins and some times we get this afer 1 hour. Is there a setting in WebLogic that drives page cannot be displayed or is this a browser setting?
Thanks

Hi RAdha,
CRSJavaAdmin.exe is controlled by UCCX node manage servicer, Can you go to the serviceability tool (start - programs - Cisco unified CCX administrator - Cisco Unified CCX serviceability ) and in process ACtivation tab make sure all the services aren enabled specialy "cisco unified CCX administrator" if not enable it and restart the node manager service from the services menu
Hope this helps
Thank you
Anuj

Not able to browse to the CRS Administration URL and "Page Cannot be Displayed error appears"

I have installed IPCCX 7.0 in VMware
I have finished the installation without any error.But after installation when I tried to open the Admin page from
Start > Programs > Cisco Unified CCX Administrator > Application Administration
Getting error message "Page Cannot be displayed".
From troubleShooting Guide found that these services should be running
Check that the CRSJavaAdmin.exe is running (in Windows Task Manager).
World Wide Web Publishing service.IIS Admin service
Can anyone tell me How to run CRSJavaAdmin.exe ??
Thanks in advance.
Reena

Hi RAdha,
CRSJavaAdmin.exe is controlled by UCCX node manage servicer, Can you go to the serviceability tool (start - programs - Cisco unified CCX administrator - Cisco Unified CCX serviceability ) and in process ACtivation tab make sure all the services aren enabled specialy "cisco unified CCX administrator" if not enable it and restart the node manager service from the services menu
Hope this helps
Thank you
Anuj

Page cannot be displayed' error when 2 events (FireAction and GO) fired

We have created a framework page where FireAction event will be executed
when the value of a calendar item is modified. When we modify the
value and leave the cursor in the field (without tabbing out), and click
GO button, 'Page cannot be displayed' error message will be displayed.
When FireAction event is started, we use CO to retrieve the event. And
when the cursor remains in item1 after being modified and click GO,
2 events will be started (the FireAction event and the GO button's event)
and 'Page cannot be displayed' error will be shown since CO is retrieving
2 events at the same time.
Since by changing certain fields of framework page without tabbing out
is a regualar operation, how can we go around this error when we are
using FireAction event?
sample34_00co.java
package oracle.apps.xx03.ap.webui;
import oracle.apps.fnd.common.VersionInfo;
import oracle.apps.fnd.framework.webui.OAControllerImpl;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.OADialogPage;
import java.util.Calendar;
* Controller for ...
public class Sample34_00CO extends OAControllerImpl
public static final String RCS_ID="$Header$";
public static final boolean RCS_ID_RECORDED =
VersionInfo.recordClassVersion(RCS_ID, "%packagename%");
public StringBuffer message = new StringBuffer();
* Layout and page setup logic for a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
Calendar cal = Calendar.getInstance();
// When the browser back button is not executed
if (!pageContext.isBackNavigationFired(false))
System.out.println("NOT FROM BACK BUTTON!! ["+cal.getTime()+"]");
// When the browser back button is executed
else
System.out.println("FROM BACK BUTTON!! ["+cal.getTime()+"]");
//Action being performed when the browser back button is executed
OADialogPage dialogPage = new OADialogPage(STATE_LOSS_ERROR);
pageContext.redirectToDialogPage(dialogPage);
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
Calendar cal = Calendar.getInstance();
if ( "updateItem1".equals(pageContext.getParameter(EVENT_PARAM)) )
//When FireAction is executed
System.out.println("item1 FireAction is executed! ["+cal.getTime()+"]");
else
//When other actions beside FireAction is executed
System.out.println("item1 FireAction is not executed! ["+cal.getTime() +"]");
sample34_00pg.xml
<?xml version = '1.0' encoding = 'UTF-8'?>

<page xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:ui="http://xmlns.oracle.com/uix/ui" version="9.0.3.8.11_1183" xml:lang="en-US" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$">
<content>
<oa:pageLayout id="PageLayoutRN" windowTitle="Sample34_00 WindowTitle" amDefName="oracle.apps.fnd.framework.server.OAApplicationModule" title="Sample34_00 PageHeader">
<ui:corporateBranding>
<oa:image id="corporateBrandingImage" source="/OA_MEDIA/FNDSSCORP.gif"/>
</ui:corporateBranding>
<ui:contents>
<oa:messageComponentLayout id="MainRN" controllerClass="oracle.apps.xx03.ap.webui.Sample34_00CO">
<ui:contents>
<oa:messageTextInput id="item1" prompt="item1" dataType="DATE">
<ui:primaryClientAction>
<ui:fireAction event="updateItem1"/>
</ui:primaryClientAction>
</oa:messageTextInput>
<oa:messageLayout id="ButtonLayout">
<ui:contents>
<oa:submitButton id="Go" use="/oracle/apps/fnd/attributesets/Buttons/Go"/>
</ui:contents>
</oa:messageLayout>
</ui:contents>
</oa:messageComponentLayout>
</ui:contents>
</oa:pageLayout>
</content>
</page>
----------

Shive...good one..!!
One thing that you can do if you don't wanna have PPR, is to validate date column in fire action event in CO in process form request, and raise an error if you don't find appropriate format or null , as per your requirement.
--Mukul

XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

XML page cannot be displayed cannot view XML input using XSL style sheet Please correct the error and then click the REfresh

Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
''If it displays in Firefox:''
It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
''If it displays in IE or embedded in another Microsoft application:''
In a web search I found these suggestions:
(1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
(2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
Any luck?

WebUtil and "This page cannot be displayed"

Hi,
After installing WebUtil, using the steps in the Familiarization manual and the notes in the Readme.txt file, when I ran a previously working form in the Builder, Internet Explorer complains the page cannot be displayed. I have reviewed the install steps, but I could not find what I did wrong.
What should I be looking for to correct this error? Thanks much.

Ok, I got the problem fixed. In the Familiarization manual, it says to add to the orion-web.xml file the following statement to create a virtual directory:
<virtual-directory virtual-path="/webutil" real-path="c:/webutil/lib" />
I changed the line to:
<virtual-directory virtual-path="/forms90/webutil" real-path="c:/webutil/lib" />
And it works.
Cheers!
rmc

In the Graphic Tab and Work Center Error The Page Cannot be displayed

Hi In the Solar01 and also in the Solman_Workcenter I am getting error "The Page Cannot be displayed"
In the Solar01 - I have Business Processes save and under the Graphic Tab when I am clicking on the correct Business Scenario Node. I am expected Graph to display. But Showing error
In the Solman_Workcenter - I set up the added the Starndard Role Busing Solaman Basic Role and + implementation role. When i go under Solman_workcenter transaction I am getting the same prolbem i.e "The Page Cannot be displayed"
Any Idea friends.
Appreciate your help
-Santh

Hi,
Refer note 834832. Check activation of services in transaction SICF and the patch level of your SAP GUI.
Thanks.
Kathir

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

Just installed LMS 3.2 and get "Page Cannot Be Displayed" when trying to access it.

I installed CiscoWorks LMS 3.2 on a Server 2008 SP1 machine. Installation went fine. I am using IE 7.0 on the server to access LMS 3.2. I get the web interface for the unsecure site but when I provide my login credentials, I get redirected to the 443 site and the generic IE Page Cannot Be Displayed is returned.

Could be CSCtb17186:
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb17186
https://supportforums.cisco.com/message/1328649#1328649
Also, LMS 3.2 calls for manually setting the amount of swap on Win2k8:
https://supportforums.cisco.com/message/680507#680507

When i open my SQL reporting URL it says this page cannot be displayed

Hi All,
I am using SQL Server 2008 with SP3. When i open my open my reporting manager URL. i get the error as "This page cannot be displayed" HTTP Error 500 internal server error. I read few blogs posted below. Tried both but could not help me out
http://social.technet.microsoft.com/Forums/en-US/1a03196f-f8ee-4a66-b08b-b2e02447a25e/can-not-open-page-for-report-manager-url-httplocalhost8080reports-for-sql-server-2008?forum=sqlreportingservices
and
http://ashwaniashwin.wordpress.com/2014/02/28/the-url-has-already-been-reserved-error-while-configuring-the-report-server-url-in-reporting-services-configuration-manager/
But none of them helped.
I tried deleting the reserved URL and re reserved but still did not help.
Tried changing the port number but still no luck.
I analysed the sql reporting error log and found the below.
===============================================
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: Unable to validate data.
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: HTTP status code --> 500
===============================================
at ReportingServicesHttpRuntime.BaseWorkerRequest.FilterAndThrowException(Exception e, String message)
at ReportingServicesHttpRuntime.RsWorkerRequest.GetUserToken()
at System.Web.HttpContext.get_ImpersonationToken()
at System.Web.ClientImpersonationContext.Start(HttpContext context, Boolean throwOnError)
at System.Web.HttpApplication.ThreadContext.SetImpersonationContext()
at System.Web.HttpApplication.ThreadContext.Enter(Boolean setImpersonationContext)
at System.Web.HttpApplication.OnThreadEnterPrivate(Boolean setImpersonationContext)
at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)
library!ReportServer_0-1!e0c!06/07/2014-03:30:49:: Call to GetItemTypeAction(/).
library!ReportServer_0-1!f10!06/07/2014-03:30:49:: i INFO: Catalog SQL Server Edition = Enterprise
library!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Catalog SQL Server Edition = Enterprise
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Initializing crypto as user: E2K\Lg161489
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Exporting public key
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Performing sku validation
crypto!ReportServer_0-1!e0c!06/07/2014-03:30:50:: i INFO: Importing existing encryption key
library!ReportServer_0-1!e0c!06/07/2014-03:30:50:: Call to ListParentsAction(/).
library!ReportServer_0-1!e0c!06/07/2014-03:30:50:: Call to ListChildrenAction(/, False).
webserver!ReportServer_0-1!e0c!06/07/2014-03:30:50:: i INFO: Processed folder '/'
library!ReportServer_0-1!ad4!06/07/2014-03:30:51:: Call to GetPermissionsAction(/).
library!ReportServer_0-1!f10!06/07/2014-03:30:51:: Call to GetPropertiesAction(/, PathBased).
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPermissionsAction().
library!ReportServer_0-1!f10!06/07/2014-03:30:52:: Call to ListChildrenAction(/, False).
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
library!ReportServer_0-1!f10!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: Unable to validate data.
ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: HTTP status code --> 500
I have also attached all the logs in a FTP for further analysis. Please download it from the below link.
https://depositfiles.com/files/cfe6af33b
Can any one please help me. Seems to be a never ending issue to me.

Take a look on link
http://pcsupport.about.com/od/findbyerrormessage/a/500servererror.htm
In case If you rebuilt the server then then linking will break , go in encryption keys option if only delete button is enabled, and backup button is disabled the delete the keys .close the report configuration manager and reopen the manager .Now try
to open report manager url.
Please click "Propose
As Answer" if a post solves your problem, or "Vote
As Helpful" if a post has been useful to you

"XML page cannot be displayed" error

Using XML output on a table with more than a few rows falls over with a "XML page cannot be displayed" error. Sometimes only the error is displayed, sometimes some rows are displayed with this error at the end of the page (eg the DEMO_STATES table)
Can anyone advise if there is some sort of limiter at work here?
Thanks,
Barry

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

XML Page cannot be displayed An invlaid character

While testing a report, I have noticed two issues and I believe this is the correct forum for the subject.
A report is completing successfully with a completion status of Normal in the concurrent manager. The report has data. However upon inspection of the XML of the request (Diagnostics -- View XML) the following error message appears
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'http://sinudy07.devtst.go2uti.com:4110/OA_CGI/FN...
<ITEM_DESCRIPTION>Office supplies
Upon inspection of the data, it appears that the offending character is an ACSII 150.
Can you provide a solution by which alphanumeric data is properly handled in XML? Is this an encoding issue?
Why does XML Publisher exit successfully when it has an error? When this error is detected, I am assuming that the report is incomplete, but to the end user it looks complete.
Many thanks for your suggestions and advice.
Tom

Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
''If it displays in Firefox:''
It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
''If it displays in IE or embedded in another Microsoft application:''
In a web search I found these suggestions:
(1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
(2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
Any luck?

XML Page cannot be displayed error on interactive reports

Hi, I am having trouble with a user downloading an interactive report as a CSV output. When a user tries to download the interactive report (as it is displayed when the web page loads, no alterations), they are getting this error:
The XML Page cannot be displayed.
Cannot view XML input using XSL style sheet. Please correct the error and then click the refresh button, or try again later.
A name was started with an invalid character. Error processing resource 'http.............'.
This is only happening with a small group of users which doesn't include me, so it has been very hard to troubleshoot. I can download the report and open in Excel without any problems.
I am using Apex version 3.2 and IE 8. The user did not have multiple windows or tabs open logged into ApEx at the same time.
Has anyone ever had this problem before? I could not find a thread with the same issue.
Thanks!

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

XML page cannot be displayed?

Hi,
I'm getting this error message when trying to view the XML for a data template:
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name was started with an invalid character. Error processing resource
<system name>
This is my Data Template:
<dataTemplate >
     <dataQuery>
          <sqlStatement name="Q1">
               <![CDATA[SELECT r.short_desc arec_type,
             NVL (t.short_desc, 'No Group') aprospect_group,
             p.prospect_id,
             t.hierarchy_order asort_order,
             DECODE (r.record_type_priority_value,
                     0, 99,
                     r.record_type_priority_value
                    ) asort_rec
        FROM prospect p,
             prospect_entity pe,
             entity e,
             tms_prospect_group t,
             tms_record_type r
       WHERE p.prospect_id = pe.prospect_id
         AND pe.id_number = e.id_number
         AND e.record_type_code = r.record_type_code
         AND p.prospect_group_code = t.prospect_group_code(+)
         AND p.active_ind = 'Y']]>
          </sqlStatement>
</dataQuery>
</dataTemplate>
Sorry if this is answered somewhere else. Couldn't find anything on it.
Thanks!

Hi..
Your data template should look something like below...
<dataTemplate name="dataTemplateName" description="Template description">
     <dataQuery>
          <sqlStatement name="Q_1">
               <![CDATA[SELECT r.short_desc arec_type,
NVL (t.short_desc, 'No Group') aprospect_group,
p.prospect_id,
t.hierarchy_order asort_order,
DECODE (r.record_type_priority_value,
0, 99,
r.record_type_priority_value
) asort_rec
FROM prospect p,
prospect_entity pe,
entity e,
tms_prospect_group t,
tms_record_type r
WHERE p.prospect_id = pe.prospect_id
AND pe.id_number = e.id_number
AND e.record_type_code = r.record_type_code
AND p.prospect_group_code = t.prospect_group_code(+)
AND p.active_ind = 'Y'
]]>
          </sqlStatement>
</dataQuery>
     <dataStructure>
          <group name="G_1" source="Q_1">
               <element name="short_desc arec_type" value="short_desc arec_type"/>
               <element name="aprospect_group" value="aprospect_group"/>
               <element name="prospect_id" value="prospect_id"/>
               <element name="asort_order" value="asort_order"/>
               <element name="asort_rec" value="asort_rec"/>
          </group>
     </dataStructure>
</dataTemplate>

XML page cannot be displayed - Servlet error

Hi,
I am trying to extract XML data from a source using a servlet.But i am getting this error when i run my servlet in IE :
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The download of the specified resource has failed. Error processing resource 'http://serverA.h.c.com:9300/p2pd/cog...
</dataset>
Can someone please guide me why i am getting this error? Here is the servlet code that i am using :
package com.cognos.demo;
import javax.servlet.http.*;
import java.io.*;
import com.cognos.developer.schemas.bibus._3.*;
import java.io.IOException;
import java.io.PrintWriter;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServlet;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
* To change this generated comment edit the template variable "typecomment":
* Window>Preferences>Java>Templates.
* To enable and disable the creation of type comments go to
* Window>Preferences>Java>Code Generation.
public class XMLGenerator extends HttpServlet
     //Logging information goes here
      public void doGet(HttpServletRequest request, HttpServletResponse response) throws IOException
          response.setContentType ("text/html;charset=utf-8");
          response.setCharacterEncoding("utf-8");
          String xml = null;
          RunReport reportRunner= new RunReport();
          CRNConnect connect=new CRNConnect();
          String url="http://serverA.h.c.com:9300/p2pd/servlet/dispatch";
          String nameSpace="ADS_NS";
          String uid="cognos";
          String pwd="abcd45";
          Logon sessionLogon = null;
          int REP_XML=1;
          try {
          connect.connectToCognosServer(url);
          catch (Exception e)
               e.printStackTrace();
               //System.out.println("Not able to connect to Cognos Server");
               response.getWriter().print("Cannot connect to Cognos server");
          sessionLogon=new Logon();
          String logonOutputSource = "";
          String reportOutput=null;
          //Till the user gets logged in or he exits
          while (!Logon.loggedIn(connect)) {
               try
                    logonOutputSource = sessionLogon.quickLogon(connect,uid,pwd);
                    //System.out.println("Connected to the Cognos server..");
                    System.out.println(logonOutputSource);
               catch(Exception ex)
                    System.out.println("Error : Unknown host ");
               if (!Logon.loggedIn(connect)) {
                    response.getWriter().print("Unable to logon");
                    System.exit(0);
          //Report Processing here
          //String reportName=args[0].trim();
          //locate the selected report
          BaseClassWrapper selectedReport=null;
          selectedReport=reportRunner.findReport(connect);
          reportOutput=reportRunner.runReport(connect,selectedReport,REP_XML,false);
          xml=reportOutput;
          //System.out.println("Main:" + reportOutput);
          System.exit(0);
          try
               response.getWriter().print(xml);
               response.getWriter().flush();
          catch (IOException e)
               response.getWriter().print("Unable to publish xml");
               System.out.println(e);
}I am using some classes to extract xml data from a data source and retrieve that as a string and then i am displaying it using response object.
Any help in this regard would be highly appreciated.
Thanks,
Shishir.
Edited by: Invinc4u on Dec 15, 2008 6:56 AM

i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
hope this helps,
raj

NES Plugin and Page cannot be displayed

Similar Messages

Maybe you are looking for