Nessessary Field Required in Master Data to run Of MRP

Dear All
As Per The Requirement of MRP Whats the nessessary Field fillup in Master Data Of a Particular Finished Product & Also Raw Material.
Thanks
Pankaj Agarwal

Hi Pankaj,
For MRP Type PD, other important fields for MRP are
MRP1
   - Lotsize
   - MRP Controller (Reporting purpose)
   - MRP Group (Generally not a mandatory field) but certain parameters can be defaulted in configuration for an MRP group.
MRP2
- Procurement type
- Special Procurement type (if special planning process is going to be used)
- Inhouse Prodn / Planned delivery time
- Schedule margin key
- Safety Stock details if safety stock is planned for material
MRP3
- Strategy Group
- Consumption mode and Forward consumption and Backward consumption details if it is a MTS strategy used.
- Availability check (Group)
MRP4
- BOM Selection method
- Individual and Collective indicator
Hope this helps....Reward your points....,
Regards,
Prasobh

Similar Messages

Requirements for master data template

HI,
Please let me know the basic requirements for master data template. What all the infotype to be involved in collecting master data template.
Thanks and regards,
Aylwin

Hi Alwyn,
If you dealing with india payroll definately Yes subject to you business process again.
Even though it is indian payroll some item may not applicable
For exmple other income resourece will be if you go to manufaturing industries you may face problem even though they got some they don't want reveal it to the employee.
in such that infotype is not required as per your business process.
Some states like UP there is no profession tax. Genrally we say profession tax need to be configure you need that master data.
If such case that might be wrong for that you need to give all the info
use PA30 t code go in side check what are the mandatory fields and take them as master data fields and put it in template.
If your client is able to give other field you can very well add them no harm in it.
But make sure you filled mandatory fields
That is the reason i was asking you to tell which coutry payroll you using
Best Regards

Custom Field in Asset Master Data

Dear Experts,
I want to ask about a problem I'm having when adding a new field in Asset Master Data ( AS01 & AS02 ).
I'm adding new field on the Time-dependent Tab. I already create the exit & the new custom field, and with the help of the functional registered the new field.
I'm using a new installed SAP GUI 7.3 .
The problem is that the new field doesn't appear when I access the tcode unless I click on the new field location.
The problem seem doesn't appear in SAP GUI 7.1 & 7.2.
Is there any setting that need to be done or this is the problem with the SAP GUI 7.3
Thank you.

Hi Karim
You can go through the steps below to customize the field u2018Planned. retirement onu2019
1, AS02 -> Menu: Environment -> screen layout -> Master data -> select layout and double click on Logic field group -> Select Logic field group 2 u2018Posting informationu2019 and double click on field group rules -> Change field group 13 to u2018Suppressed entry fieldu2019.
Alternatively
2, Use AO21 to customize the field as above.
Note: field u2018Planned. retirement onu2019 in asset master is connected to the function u2018Simulate up to planned retirement dateu2019 in asset reports. After field u2018Planned. retirement onu2019 of asset master data is deactivated, the function u2018Simulate up to planned retirement dateu2019 in asset report will be disabled.
Hope itu2019s helpful
George

How to display field Functional Location Field in Asset Master Data

Dear Experts,
I really appreciate for your advices on how to display Functional Location Field in Asset Master data.
I have checked the configuration on path IMG:\Financial Accounting->Asset Accounting->Master Data->Screen Layout->Define Screen Layout for Master Data
I have chosen the screen layout and review all Logical Field Groups. And there's no field "Functional Location" is available. I also didn't find "Add New" button to add "Functional Location" field.
Thank you
Best regards,
Frans

Dear Frans,
I am sorry this is not possible.
Note 140482:
The field was created as a precaution. However, it is not being used at
present and consequently is not supplied.
In particular, you cannot use the field as a criterion for a selection
in Asset Accounting reporting. This is still true even if this field has
been included in the selection view delivered for the dynamic selections
by modification.
regards Bernhard

Add additional field in Vendor master data for VAT Reg. No.?

Add additional field in Vendor master data for VAT Reg. No.?
Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
Current Settings:
Country : LFAS-LAND1
VAT registration no.: LFAS-STCEG
I need to add one additional field for text information. Is this possible?
Thanks you very much
Luis G.

If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
In SPRO, go to:
>Logistics-General
->Business Partner
-->Vendors
--->Control
>Adoption of Cusomter's Own Master Data Fields
and read the documentation provided there.
You will need to implement following BAPIs
Processing Master Data Enhancements: VENDOR_ADD_DATA
Customer Subscreens: VENDOR_ADD_DATA_CS
I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
regards,
Aabhas

MM Manage mandatory field in material master data

Hi,
i need to manage some fields in MM01 and MM02 in order to have these fields mandatory if other fields have particular value. For example, if material type is ZFER and Prod.hierarc (in Basic Data 1) is AL001, only in this case i want that field Comm./imp. code ,in view Foreign Trade import, is mandatory.
I'm looking for an user-exit. I find EXIT_SAPLMGMU_001 but with this solution i have a problem. The mandatory of field is active only during saving, on the contrary i would like that this mandatory will be similar to the standard.
Thanks for help,
Michele Garofalo

Hi,
I would like to make a field mandatory in Master Data.....how can i make a field mandatory field?
please provide me solution for this one
Cheers...

What are the dependent master data for running MRP

Hi Experts,
My client wants to Run MRP After 8 Months of implementation. Now i want to know
1) What are the Master Data need to be check. They are Using the Strategy 20.
2) They have confirmed sales order for few customers. Forecast sales orders for few customers.How to map it in sap.
3) Where will i get Gross Requirement in SAP. Because MRP run will generates the net requirements.
4) Is there any report in SAP displays the Forecast values for the selected material.
Please help me on the above points.
Thanks
Satheesh

HI Vishwa Upadhyay,
Thank you Once again,
The first point is cleared. Can you please suggest me on the 2,3& 4 points please. What are the configuration settings needed for the different sales order type( i.e.. confirmed and forecast)
Thanks
Satheesh.N

Master data change run.

dear all,
quick and easy question... after loading 0asset_attr_text, do i need to have an attribute change run? if not why? thanks.

Hi......
Whenever master data attributes or hierarchy is loaded an attribute chnage run need to be performd due to the following reasons:
1. When a master data is changed/updated it gets loaded into the master data table as version "M"(modified). It is only after a attribute chnage run that the master data becomes activated i.e. version "A".....and while activation of master data SID gets generated........SID is very essential for Extended Star Scema...........Otherwise Transaction data load will fail due to SID issue......
2. Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.
But it is required for attribute but not for text.......So for 0asset_attr_text attribute change run is not required.......
Hope this helps......
Regards,
Debjani.......
Edited by: Debjani Mukherjee on Oct 18, 2008 12:18 AM
Edited by: Debjani Mukherjee on Oct 18, 2008 12:20 AM
Edited by: Debjani Mukherjee on Oct 18, 2008 12:21 AM

Issues with Master Data Change Run after upgrade 7.3.1

We have upgraded to 7.3.1 on both our BW and ECC clients. When we first run out change run in BW it chose to drop and rebuild aggregates
on changes that usually don't cause a drop and rebuild. They usually do a delta.
Has anyone had this issue once upgraded?
We looked at our performance setting in SPRO for aggregates and the settings have not changed.

I loaded data for 0Material, 4 fields are not getting populated....when I checked in R/3 base table and RSA3, I am able to see data for those 4 fields. But in PSA and 0MATERIAL I am not seeing data for those fields.
THose 4 fields are Z fields mapped to Standard fields in MARA table.
As you say you can see the values of these fields in RSA3, We can rule out that the fields arent hidden. Check the mapping on the BI side, do you have all the Zinfoobjects added to the Omaterial and the corresponding mapping of source fields to target fields.
0CUSTOMER_ATTR has some data...I added new field in datasource as well as in BW also. After creating transformation I executed the DTP, it is throwing same error in every data package
"Record filtered in advance as error records with the same key exist".
Load till PSA is Init with data transfer and DTP is delta.
there are some duplicate records in the master data values that are coming in. You can manually change them in PSA and load. And if you are sure the duplicated records can be dropped, you can tick the HANDLE DUPLICATE RECORDS in DTP - update tab

Specific Field Selection for Master data

Hi Gurus,
I am looking for a master data field which is suitable to my requirement.
Requirement : We have GL accounts and loading data into Hyperion. in Hyperion they are doing data summarising GL Accounts to FRP Codes. Lets say we have 2000 GL account and they are reducing to 150 FRP Codes. This FRP contains different description as well. Mapping between GL account and FRP Codes is in Flat File, right now we want to upload FRP values thru this flat file but in the future when we create new GL Account using FS00 we need to update FRP Codes in the respective master data fields.
We have SKA1 and SKB1 (GL account master data tables). Please some tell me which are the field in this tables or any other tables use for my requirement. My client dont want to go for Generic. I m not FI consultant......
Thanks
Ganesh.

Do you want to maintain GL Account - FRP Code data ..? or Just FRP Codes from Flat Files.
If it is just FRP Codes from flat file then when you create InfoObject for FRP code, also create data flow and load the FRP values
My recommendation here is that, instead of maintaining seperatly for GL Account and FRP codes combinations, I am suggesting you go by adding FRP code to 0GL_ACCOUNT infoObject.
when you maintain Enhancement in the R/3 system where you do look up in SKA1 or SKB1 tables ..we are straight way getting even FRP Code from R/3 system. So, when a new GL Account records is extracted to BI system, you also bring the FRP Code for that GL Account (as it populated in the code)
Hope I have said you need otherwise, please give a detail on how you want to maintain with an example..
Regards,Vj

To Understand requirement for master data

Hi Experts,
i am given a requirement to create a master data   and was asked to do below
Extraction from r/3 for the new object ZCPAR
Similar to ZNTORD (get key & text from 0COORDER)
Restricted to Order type Z040 only
and
Based on value of ZCPAR_ZCFAM and ZCPAR_ZCTYN
     update attribute ZCFAM_ZCTYN
How do we do that please guide .
Thanks In Advance,
Nitya.

Hi Nitya,
Just create a char infoobject ZCPAR with required Datatype & length. In the IO properties screen, you will find a tab Master data attribute/text. Just make sure that the check box "Attribute" is checked/ticked.
Loading is same as loading any other BW DS. Just create a Infopackage & load to DS. create a Transformation from DS to MD IO ZCPAR & load the data using DTP.
Similar to ZNTORD (get key & text from 0COORDER) Restricted to Order type Z040 only
Similar to 1st point. Make sure both Attribute & text is checked. You can restrict for Order type either is Infopackage or you can write a small field routine in transformation like
IF Order type EQ Z040.
Result = 'XYZ'.
ENDIF.
Based on value of ZCPAR_ZCFAM and ZCPAR_ZCTYN update attribute ZCFAM_ZCTYN
Simple field level routine for ZCFAM_ZCTYN.
IF ZCPAR_ZCFAM EQ 'XYZ' and ZCPAR_ZCTYN EQ 'XYZ'.
RESULT = 'XYZ'.
ENDIF.
Note : Replace 'XYZ' with suitable values
Hope its clear & helpful!
Regards,
Pavan
Edited by: PavanRaj_S on Dec 26, 2011 2:45 PM

How to add new fields in asset master data

Hello,
i was wonder if anyone knows how to add new fields that arent defined in the asset master data.
Thanks.
Pedro

Hi Pedro,
SAP allows entering upto 8 fields on the asset master. These fields are called 'Evaluation group'. Out of 8, 4 are four character long and others are 8 character long.
You can configure them @ the following 3 nodes in IMG:
Financial Accounting>Asset Accounting>Master Data-->User Fields: Define 4-Character Evaluation Groups & Define 8-Character Evaluation Groups & Change Key Words in the Evaluation Groups.
Regards,
Vishal Thakur

Help Required in Master data Data model

Hello,
May some one help me in explaining the relation with the sales org, sales office, sales group, distribution channel, division, plant, material, Customer, controlling area, profit centre and cost element.
These are the info objects I have in my COPA data source. I need to decide about the master data now. I need to know which info objects can be used for master data.
Thanks in advance!
Help me with the inputs please!!
Points will be assigned!
Regards
Sri

Sales Organization
A organizational unit in Logistics that structures the company according to its sales requirements.
A sales organization is responsible for selling materials and services.
Sales Office
A organizational unit in a geographical area of a sales organization.
A sales office establishes contact between the firm and the regional market.
Sales Group
A organizational unit that performs and is responsible for sales transactions.

Distribution Channel
CA channel through which saleable materials or services reach customers.
Distribution channels include wholesale, retail, and direct sales. You can assign a distribution channel to one or more sales organizations.
Please search <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm">Glossary</a> for more....

Error "field required" in master-detail form with FORMS 10G!!

I have a Master-Detail Form.
When the cursor stay in detail block and i chage the master record with the mouse, clicking in scroll bar, i get error "field required".
In Forms 6i, works fine!!

Master block has more than one record displayed. When I click on any item in detail (except first one) and then click on different master record (return navigation to master block, but not current record) I have FRM-40202: Field must be entered on first item in detail block.
I found that reason is this part of clear_all_master_details procedure (automatically created by Oracle Forms):
IF :System.Cursor_Item <> startitm THEN
Go_Item(startitm);
Check_Package_Failure;
END IF;
Does any have same experience?
Is it Oracle bug or I am missing something?

How to maintain the e-mail field in customer master data

Hi to all,
i need to do the field e-mail obligatory in the customer master data when i create a new customer(transaction FD01), but in customizing and in the user exit SAPMF02D this field is not present in the various structure/tables enabled (the table is ADR6 but not is in the list).
How i can do? Thanks in advance for any reply!!

Dear,
Check the Functional Module through SE37 : BPAR_M_FI_MODIFY_EXECUTE_NEU
And also check the Note: 703094.
Hope it will solve.
Regards,
Kishore K
Edited by: kishore babu on Dec 21, 2009 3:38 PM

Nessessary Field Required in Master Data to run Of MRP

Similar Messages

Maybe you are looking for