Nested If condition in Routine - Literals that take up more than one line

Hi All,
       I am writing following code at object level of routine but its giving following exception: Please help me on this.
Exception:
E:Literals that take up more than one line not permitted.
CODE:
IF SOURCE_FIELDS-/BIC/TOTAL >= 900.
    RESULT = 'A.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 800 AND SOURCE_FIELDS-/BIC/TOTAL < 900.
    RESULT = 'B.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 700 AND SOURCE_FIELDS-/BIC/TOTAL < 800.
    RESULT = 'C.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 600 AND SOURCE_FIELDS-/BIC/TOTAL < 700.
    RESULT = 'D'.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 500 AND SOURCE_FIELDS-/BIC/TOTAL < 600.
    RESULT = 'E'.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 400 AND SOURCE_FIELDS-/BIC/TOTAL < 500.
    RESULT = 'F.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 350 AND SOURCE_FIELDS-/BIC/TOTAL < 400.
    RESULT = 'G.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 300 AND SOURCE_FIELDS-/BIC/TOTAL < 350.
    RESULT = 'H.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 200 AND SOURCE_FIELDS-/BIC/TOTAL < 300.
    RESULT = 'I.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 0 AND SOURCE_FIELDS-/BIC/TOTAL < 200.
    RESULT = 'J.
ENDIF.
Thanks in advance.
Anitha.B

Hi Anitha
Just check
RESULT = 'A.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 800 AND SOURCE_FIELDS-/BIC/TOTAL < 900.
RESULT = 'B.
ELSEIF SOURCE_FIELDS-/BIC/TOTAL >= 700 AND SOURCE_FIELDS-/BIC/TOTAL < 800.
RESULT = 'C.
Whether it needs to be under two quotes. I feel one is missing. it should be 'A' and not just 'A.
Regards
Sriram

Similar Messages

Can takes from more than one track be comped at the same time?

Greetings,
I know that this question has been asked recently in this forum (http://discussions.apple.com/thread.jspa?messageID=9527542&#9527542), but I don't think that the respondents completely understood the question... Or perhaps I did not understand the suggested solutions to the problem. I will ask the question in a slightly different way...
Suppose that I record guitar with 2 microphones (a pickup mic, and a room mic). The first microphone is recorded onto track 1, the second microphone is recorded onto track 2. Multiple takes are done in this manner. When it comes time to comp the tracks, how is it done? Can the takes from more than one track be comped together at the same time? I have tried to do this by grouping both tracks together, but it does not work.
Any suggestions?
Thank you.

You had the right idea grouping the tracks together. You must make sure that in the group settings, the box titled "region selection (edit)" is checked. This will allow you to make the same cuts (or in this case, swipes) on all regions in the group.

App that can send more than one attachment at a time....

Does anyone know of a app that I can send more than one attachment at a time like resumes + cover letters. Not having any luck with gmail or pages for the Ipad.
Please help

The MPEG Streamclip app can batch process videos. It can even convert up to 4 videos at the same time.
http://www.squared5.com/
It's free...
Just drop as many videos as you like into the batch window.

Wireless AP that will allow more than one security setup

I have a customer that is looking to install a new AP and have
it accessible by their employee's and visitors. So is there an AP out there that will allow you to setup more than one SSID and have one of the SSID's with access to the local network/internet and the other SSID set to have only access to the Internet??
Thanks in advance for any thoughts on this.
Mike

We used the 1131 AP. We set up 2 different WLAN's.
Business WLAN = 172.16.x.y with WPA security
Guest WLAN = 192.168.x.y with WEP security
The AP was connected to a 3560 switch on a trunk port. So the Guest WLAN is in a different VLAN and access was controlled through an ACL. Guest can only access the Internet.
I'm sure some of the other Cisco AP's wil do the same thing.

Video Converter app that can convert more than one video at a time?

Hi everyone,
I;m after an app that i can convert my videos with. I want a free app where i can add multiple videos and have them convert one after the other? does anyone know of a free app that i can get?
I know theres smartconverter (free) but you cant add multiple videos and i dont want to pay $10 for pro!
can someone please HELP Thanks

The MPEG Streamclip app can batch process videos. It can even convert up to 4 videos at the same time.
http://www.squared5.com/
It's free...
Just drop as many videos as you like into the batch window.

Grouping on fields that have more than one value entered. Please need help fast!!!

Post Author: DennisC
CA Forum: General
I am creating a report that is to be grouped on a particular field that can have more than one entry. My user said they did not care how I did it but to only count the record one time. The field that is selected is a dropdown on an form that is in Alpha order. So the entries always appear in the the field in alpha order. This is for use as an example: Record 1 has a value of CAT in the field, Record 2 has a value of CAT, DOG in the field and Record 3 has a value of CAT, DOG, HORSE in the field. I get 3 separate groupings for the 3 records.
Group = CAT
      Then the detail information appears here
Group = CAT, DOG
      Then the detail information appears here
Group = CAT,DOG,HORSE
      Then the detail information appears here
What is would like to see using this example is one group for CAT with all 3 records appearing under it and ignore the other two. This way there would all be getting counted but the report would look a little more streamlined.
Group = CAT
      record 1 detail information
      record 2 detail information
      record 3 detail information
thanks in advanced for any help!!!!

Post Author: shawks
CA Forum: General
I am trying resolve the same/similar issue in Crystal Reports 10. For example, on a table there is a column called X with values Xsub1, Xsub2, Xsub3, etc. The user can select a parameter that includes Xsub2 and Xsub4. If this is selected 2 reports are generated (one for Xsub2 and Xsub4). What we really want is one report with the combined information for Xsub2 and Xsub4. How is (or is it) possible to do this in Crystal Reports 10? FYI - When the report was initially created the main body of the report was placed in the Group Footer so if the Group Footer is suppressed the content of the report is suppressed, too.
Thanks

My Mac mini won't recognize photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space.

My Mac mini won't recognize iphone 4 photo library in itunes so I can download pics from library and free up space in memory, I was able to download camera role but not photo library that takes up more space. Help thanks

The photo sync is one-way: Computer to phone. Photos synced to your phone will have to be extracted from your phone using third-party software, if you want them on your computer, as Apple makes no provision to do so. Since you're using a Mac, you can use this:
http://www.ecamm.com/mac/phoneview/

Script to find users that are a member of more than one of a list of specific groups

Hi,
I need to generate a list of users that are members in more than one group, out of a list of specific security groups. Here's the situation:
1) We have about 1100 users, all nested under a specific OU called CompanyUsers. There are sub-OUs under CompanyUsers that users may actually be in.
2) We have about 75 groups, all directly under a specific OU called AppGroups. These groups correspond to a user's role within an internal line of business application. All these groups start with a specific character prefix "xyz", so the group
name is actually "xyz-approle".
I want to write a script that tells me if a user from point 1) is a member in more than one group in point 2). So far, I've come up with a way to enumerate the users to an array:
$userlist = get-qaduser -searchroot 'dq.ad/dqusers/doral/remote' | select samaccountname |Format-Table -HideTableHeaders
I also have a way to enumerate all the groups that start with xyz that the user is a member of:
get-QADMemberOf -identity <username> -name xyz* -Indirect
I figure I can use the first code line to start a foreach loop that uses the 2nd code line, outputting to CSV format for easy to see manual verification. But I'm having two problems:
1) How to get the output to a CSV file in the format <username>,groupa,groupb,etc.
2) Is there any easier way to do this, say just outputting the users in more than one group?
Any help/ideas are welcome.
Thanks in advance!
John

Here is a PowerShell script solution. I can't think of way to make this more efficient. You could search for all groups in the specfied OU that start with "xyz", then filter on all users that are members of at least one of these groups. However, I suspect
that most (if not all) users in the OU are members of at least one such group, and there is no way to filter on users that are members of more than one. This solution returns all users and their direct group memberships, then checks each membership to
see if it meets the conditions. It outputs the DN of any user that is a member of more than one specfied group:
# Search CompanyUsers OU.
strUsersOU = "ou=CompanyUsers,ou=West,dc=MyDomain,dc=com"
$UsersOU = New-Object System.DirectoryServices.DirectoryEntry $strUsersOU
# Use the DirectorySearcher class.
$Searcher = New-Object System.DirectoryServices.DirectorySearcher
$Searcher.SearchRoot = $UsersOU
$Searcher.PageSize = 200
$Searcher.SearchScope = "subtree"
$Searcher.PropertiesToLoad.Add("distinguishedName") > $Null
$Searcher.PropertiesToLoad.Add("memberOf") > $Null
# Filter on all users in the base.
$Searcher.Filter = "(&(objectCategory=person)(objectClass=user))"
$Results = $Searcher.FindAll()
# Enumerate users.
"Users that are members of more than one specified group:"
ForEach ($User In $Results)
    $UserDN = $User.properties.Item("distinguishedName")
    $Groups = $User.properties.Item("memberOf")
    # Consider users that are members of at least 2 groups.
    If ($Groups.Count -gt 1)
        # Count number of group memberships.
        $Count = 0
        ForEach ($Group In $Groups)
            # Check if group Common Name starts with the string "xyz".
            If ($Group.StartsWith("cn=xyz"))
                # Make sure group is in specified OU.
                If ($Group.Contains(",ou=AppsGroup,"))
                    $Count = $Count +1
                    If ($Count -gt 1)
                        # Output users that are members of more than one specified group.
                        $DN
                        # Break out of the ForEach loop.
                        Break
Richard Mueller - MVP Directory Services

Upgraded to iOS 6 and now I can't open anything in the kindle app? I have to say that I have had my ipad3 for 6 months and intensely dislike the problems with using it. Also is there any way of opening more than one screen as it is hopeless otherwise?

I Have had my iPad for 6 months as I cannot access my work emails using windows. I have to say that it is the most unhelpful device I have ever used and although it looks like there isn't an answer for some of the questions I have asked below, I thought I would try!
1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
IT might just be that I don't have the correct settings (I am a technophobe) but I absolutely hate the iPad and only have it for work emails, it is so annoying that I can get my mobile phone and kindle3g to work fine, but always have problems with the iPad. I am sure it could be good (and for reading emails on the go in the uk it is great, as I like the key board) but it just seems to make everything else difficult.
i Hope you can help and sorry for asking questions others have, but I am just hoping that something new might have been developed!
thanks,
K
Message was edited by: K Paton

1) I have upgraded to ios6 and the kindle app will open but crashes and disappears when I try to access a book?
Try rebooting your iPad, that should fix he issue. I that doesn't work, delete the app and re-download it. The Kindle books should all be in he Kindle cloud services and you can get them again. I have an iPad2 w/ Kindle app and it works just fine - no issues.
2) is there any way I can open more than one page at a time, as opening one at a time is hopeless?
Page as in a kindle book way? turn iPad to landscape position from portrait position. If, however, you mean open more than one application at a time, then no. And not hopeless, as it takes a bit of time to get used to, going from a desktop/laptop format to tablet format.
3) Is there any way you can replicate the right click function on word? As pasting and copying on the iPad is irritating to say the least!
It's actually fairly easy. Press down on the word, then you can expand by drawing your finger to cover word/sentence/paragraph/page, hit select or select all then it gives you the option to cut, copy, paste, define. If you want to use a word processing app on the iPad, Pages is a good application.
4) why can't my Samsung 11 phone connect to my iPad via Bluetooth? A they can't seem to 'see' each other? I may have turned a setting off when I was recently abroad and didn't want huge roaming charges.
It's the connection on your phone. Samsung Galaxy SII? Android software? What you have to do is go to the phone's settings and connect via wireless, not Bluetooth. Go to System Settings (on phone) and under Wireless and Networks click 'more' and go to the Tethering and Portable Hotspot option. Set up your mobile wifi hotspot, name it though it will probably come up with 'AndroidAP', choose a WPA2 security level and put in a password. Go back to previous screen and turn on 'Portable Wi-Fi Hotspot' box. Then on your iPad in the Settings - Wi-Fi section, it should then recognize your phone for tethering. If it's a Windows Phone 7, I don't know the layout of that software, but presumeably similar.
5) Why do the submit buttons on some websites not work and how can I get them to? I never have a problem with windows, but it is often a problem with the iPad.
Sometimes the issue is with the website design, not all websites are optimized for mobile devices - not just iPad but also Android devices. It happens. They're getting there, but occasionally the page might need a refresh.
6) I have several websites which I have built and usually upgrade on the windows desktop, usually through Internet explorer, but I can't access the sites properly on the iPad (I can see them but can't alter them) and when sending emails through the websites they won't show the page and I can't navigate the page (the size of the email page is bigger than the iPad screen, but I can't either shrink the page to size or move the page around as you normally would on the pad, any ideas?
It depends on what you use to build the websites on the computer. Recommend a free program on the computer called CoffeeCup Free HTML Editor. I don't recommend using IE period; Firefox or Chrome are my choices on Windows machines. I have two websites that I manage, both using this program. I'm assuming that when you mean you can't access the sites on the iPad you mean to update them? Ostensible there are apps to let you do this. What format are the sites? Without seeing what exactly you mean and what you want to do, it's hard to explain.
As for seeing full page while emailing within a site, turn iPad to portrait mode, and try to finger-pinch touch the screen to see if that will bring the fuller page into view. Other option is opening a second tab with same website and just go between tabs to reference material.
7) finally, when roaming abroad recently, I had no problems using the wifi, but when trying to use the cellular data (using the roaming function) I could not get it to work? The ipad seemed to be connected to the network with no problems, but wouldn't actually update the emails? I tried turning it on and off, but that didn't make a difference. My kindle and mobile phone (both also on 3G ) worked great, it was just (as usual) the ipad playing up.
If you were outside the US or Canada, my guess is the problem lies within the SIM card in your iPad. If you were outside North America, there are different band levels - I'm guessing you have a SIM thats locked to a particular provider. Band level frequencies differ per country/continent, so a SIM card that will work in Canada/US will not likely work in UK/Europe/Asia/Australia, etc. you will be able to get your emails again when back on a wifi network. Mobile phone may have a different type SIM card (GSM/HSPA) from your iPad SIM. Also, check your email settings.
8) when wanting to alter part of a sentence, I can't always get the cursor in the right place? Sometimes it is simple the wrong line, but often it will only go at the end or start of a word and not where I want it. Is there any way of making it more exact? Again I never have a problem with moving the cursor on windows, either by mouse or on the touch screen function on windows 7. Any ideas? As after pressing the screen multiple times I just want to throw it out of the window!
Moving the cursor on a sentence is a matter of putting your finger on the screen where you want it. It's exceptionally easy to do. I'm using the Notes app to write this whole segment and I just need to put my finger where I want to change things and presto it's ready for me to change where I want it.
Here's a solution: sell your iPad (after you wipe your data off it) to someone who will appreciate it, and put your money towards the Windows Surface Tablet out later this year/early next year, where you can (reportedly) connect a mouse to it. It will have some of the Windows 7/8 functionality that you're more familiar with, or get a netbook.
- Ceridwyn2

VPN with more than one filter / nested ACL

Dear All,
Is there a way to assign more than one ACL to a VPN profile or implement a nested ACL structure?
I am trying to avoid modifing a large list of ACLs to insert the same ACE in each ACL bound to different VPN profiles.

Hi,
I know only the few basics ways to control the VPN users traffic they basically are
Changing the global "sysopt" setting and controlling all user traffic on the external interface ACL
Use separate VPN Filter ACLs
If using subinterfaces for local interfaces then tie the VPN connection to a specific Vlan which would allow connectivity only towards that Vlan subinterface for those VPN users.
In some cases we might use a separate device to do the access control.
But I guess if the requirement is to have a specific ACL for each VPN user group then the original suggestion is not an option for you.
I was just thinking that using the same ACL would make it easier to generate the new configuration addiotion. Atleast in the sense that the ACL name for each rule would be the same. If you didnt make too broad ACL rules it would not really allow any connectivity between the different networks involved though that would also depend on the NAT configurations, not just the ACL.
- Jouni

Can't select more than ONE conditional text tag in FrameMaker 10?

Hi, I work with lots and lots of Conditional Text (CT) tags in FrameMaker. We moved to v10, and now I can't select more than ONE CT tag at a time---this means when I need to apply 10 CT tags to one item, I have to select the item, click one tag, click In, and then click Apply---3 clicks, 10 separate times = 30 clicks! (I used to be able to select the item, select all the CT tags I wanted applied into the In box, and then click Apply.) This is very frustrating. I've tried to click all the Ctrl, Shift, and Alt keys separately and then try and select more than one tag, but nothing works. Please help---this is going to be a nightmare for me if this can't work!
Please help and show me that I can add more than one tag to an item at a time. Thanks so much!!!

Unfortunately, this capabiliy wasn't carried over to the Conditional Text pod when the new interface design was created. You're stuck selecting the tags one at a time and then applying a condition. It's a bit faster if you select the conditions sequentially, then you have fewer clicks for applying subsequent tags to the same content.
I fully agree that this sucks.
Please fill in a bug report and a wish list item at: FrameMaker Bugs & Wish List
You can also add/vent to the following thread (that is monitored by Adobe):
Seeking inputs on desired features in FrameMaker

Can we maintain more than one shipping condition for a customer

Hi,
Can we maintain more than one shipping condition for a customer

Hi Raj,
Yes you can maintain the different shipping condition for one customer but for this that SOLD To Party should have different SHIP to Party also as we mainatin the shipping condition for Ship for the party. In other words you can maintain as many shipping condition equal to the number of ship to party.
Other way is if that customer is in different sales area then you can maintain the different shipping conditions for that customer in all the different sales area.
Hope I could make myself clear enough to help you.
Please reward if its useful.
Regards,
Abhi.

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Why is my cursor taking holidays and choosing to not respond to my mouse or mice as I have more than one that I can use and it refuses to respond for a period of time

Hi
Yes you can delete the expired certificate which are showing as it is not functional anymore and they remain as stale entries
You can use below command
Remove-ExchangeCertificate -Thumbprint "specify the value "
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Trouble nesting more than one Character Style...

I am trying to create the below heading in CS5 on a Mac:
Lesson 2.1: Who am I?
So I made the Lesson 2.1 a character style called "Lesson #." And then I made Who am I? a paragraph style called "Lesson title" and nested the "Lesson #" though 1 colon. And that worked great. But then I felt like the space between "Lesson #" and "Lesson Title" was too big. (This seems really nit-picky I know but the boxes the lesson titles need to fit in are small and the titles vary in length so I was trying to save all the space I could for the longer titles.)
Lesson 2.1: Who am I?
So I made the space (see the underline above) a character style of it's own that was the same as the "Lesson Title" in all aspects except that it was 11 pt font. I then made this a nested style in the "Lesson Title" that came after "Lesson #" through 1 letter.
But it doesn't seem to be working very well...which made me question if there was something else I needed to do in order to nest more than one character style? Or whether I should be even approaching this issue in this way....
Thank you for any thoughts on this!

YES!!! IT WORKED! I think InDesign and I are now friends. All my styles are working! (knock on wood.)
Weird that the horizontal scaling would work though and not changing the font size? or maybe I jsut don't understand exactly how InDesign thinks yet...

Light Switch 2011 "C#" How to allow filter which take more than one entry to take * and show all other entries?

Dear All,
I have created the following code which extended my filter functionality and allowed a to take more than one entry (Comma have to be inserted after
each entry).
For example:
"Country Filter" can take ----> Germany,Egypt,Holand<o:p></o:p>
"City Filter " can take ---------> Berlin,Münster
if (Country_PAR != null)
String[] Country_Array = Country_PAR.Split(new Char[] { ','});
query = from p in query where Country_Array.Contains(p.Hotel_Country) select p;
if (City_PAR != null)
String[] City_Array = City_PAR.Split(new Char[] {','});
query = from p in query where City_Array.Contains(p.Hotel_City) select p;
Now want to extend it more and say something like:
If * is included ---- > Give me all entries
ex. Ge* This will give me everything which starts with Ge
If <> is entred -----> Give me entries which are not equal to a certain entry
ex. Country Filter = <> Germany give me all other entries except Germany
Thanks alot,
Zayed

Thanks your reply. I mean no one know my feeling. except if the new car is your. If Geek Squad can't install it. Just let me know and go. right? I ask many time? Are you ok to finish? He said yes. First time fail after 5 hours long wait and tow my car to Toyota repair. Second time said only take 20 to 30 minutes to program the key. but fail again after about 4 hours 30 minutes long wait and head light is not automatic turn on at night. I have to take a day off drive to Toyota repair. My time is money. wait there more than 10 hours and done nothing. 5 days no car and take the subway Bus and long walk. How do I feel? I m the customer. if without the customer. How you get pay? Geek Squad use my remote start and alarm and I can't return it. I loss time and money. My new car has a repair record. That is what Bestbuy want to do for the customer. Geek Squad work for Bestbuy. right? You are not just loss one customer. You will loss more and more than the remote start alarm cost. Bestbuy will not know? How come just 200$ remote start alarm and the 50$ module. Bestbuy don't want to reimburse. I m not tell you to pay me 5 days for rental car. why don't just want a happy ending? Bestbuy is big company. I m very small. 250$ it cost Bestbuy nothing. You can't let the customer loss money because you. right?

Nested If condition in Routine - Literals that take up more than one line

Similar Messages

Maybe you are looking for