Nesting .fxml component in another .fxml component using SceneBuilder

Hello,
Is it possible to use SceneBuilder to nest one JavaFX component into another?
Thanks

Yes we can do it from SceneBuilder by File-->Import--> <<select the .fxml file which you want to import>>.

Similar Messages

  • Model component using table of impedance versus frequency

    I would like to model a device which I may describe as something that has a measured impedance versus frequency in a tabular format. Is there a way to do this in Multisim. I have tried researching the Analog Behavior Model (ABM) using possibly a B Source but can't come up with the syntax that works.
    The following example was slightly modified for my purposes from another competing Spice Simulator user forum and it works there. This model shows a table using frequency, a real and an imaginary resistance. The resulting AC Analysis interpolates values of resistance and reactance based on this table. If I could get this to work in Multisim, or if there is another solution, it would be nice to receive help.
    .subckt DeviceRI 1 2
    R1 1 10  0.001
    V1 10 11 0
    B1 11 2 V=I(V1)  R_I FREQ=
    + 1000, 8, 0.5
    + 1100, 8.1, 0.7
    + 1200, 8.2, 0.5
    + 1300, 8.33, 0.6
    .ends
    Thank you.
    Daniel

    Daniel,
    The best potential workaround is to use the TRANSFER_FUNCTION_BLOCK component under Sources/CONTROL_FUNCTION_BLOCKS
    The model that this component uses supports a frequency domain transfer function that is described using rational polynomials. If you can curve fit your complex data into an equation of this format, that should do the job.
    It is theoretically possible to reproduce the response of your transfer function by created a lumped model using discrete components (by connecting together integrators, derivatives, delays, etc) but this far more challenging than to use the Transfer Function component mentioned above. 
    Let me know if that helps.
    Oleg
    Max
    National Instruments

  • Possilbe to create only mxml component using Catalyst ?

    Sorry if this has been covered elsewhere, but is it possible to only create an mxml component using Catalyst and not an entire Flex Project (fxp)? There are areas where I would like to use this tool to simply creation of components, but also I might like to write the main app in Flash Builder and just wondering if this is possible?

    Hi Jeremy,
    Yes, it's definitely possible, though it's not immediately obvious. There's another thread on this subject here:
    http://forums.adobe.com/thread/447199?tstart=0
    One trick that came up was that you can take the entire contents of your project in Catalyst and convert it to a custom component--that simply moves all the content into a separate non-application MXML component file, which you can then import into Builder and use in your Builder project.
    THanks,
    nj

  • What's the component used in this example?

    Hi,
    I'd like to know what's the component used to make those nice 'drawable' panels (like curtains) just like the lateral menu in this substance's example:
    https://substance.dev.java.net/webstart/test.jnlp
    Thanks.

    those nice 'drawable' panels (like curtainsAre you talking about JTaskPane?
    ICE

  • SAP BPC 10 NW - component used by admin module

    Hello Gurus,
    We are on BPC 10NW - SP04
    We were trying all the features using some test data.  Now, we have received actual data from the business.  We are trying to delete the previously created master data and create the new one give by the business.
    It gives an error while processing the dimension (ENTITY Dimension)
    To get processed we had done following activities too -
    1.  Deleted the transaction data from Consolidation, Ownership and Rate cubes
    2.  Deleted the BPFs
    3.  Deleted the inout forms and/or changed the references wherever we had used the hardcoded values.
    4.  Deleted the data from the referencial dimension (INPUTCURRENCY)
    5.  Tried to delete the ENTITY data from the backend (From BW)
    Still it gives the error while processing the ENTITY dimension as "Error in admin module, Component used by admin moduile"
    Only remaining part I can think of is of JOURNALS.  We had created few data using journals.  However, I am not sure how to delete the journal data. (if that is the root cause of the issue)
    Can anyone suggest the remedy for this issue.
    Let us know if you need more information.
    Regards,
    Rashmi

    Hi Rashmi,
    Please check if there is journal data. The journal data would be in a generated table. Please check for the journal generated table using the program UJ0_GET_GEN_TABNAME. You can check the entries in the table. The tables start with /1CPMB.....
    - If you simply want to clear, then  in BPC 7.5 there would be seprate task profile 'Admin Journal' which would enable the option of clearing the journals in admin console.
    Thanks,
    Sreeni

  • How to create a new component using SPICE?

    People, I don't know how to create a new component using SPICE.
    I know that it's possible to create a new component and use a SPICE code, but I don't know how to do this very well, and I need the TI ISO124 (Isolation Amplifier), and I have no idea on how to do that. Can somebody help me? I need to develop a layout.
    Thank you!!

    Hi,
    Here is a tutorial that explains in details how to create your own component in Multisim using a SPICE model.
    Hope you find it helpful,
    Mahmoud W
    National Instruments

  • Setting source property of Trinidad image component using java script

    Hi,
    Can anyone tell me how to set the source property of Trinidad Image component using javascript.
    i tried document.getElementById("f1:img").source="/images/neha.gif".
    But its not working
    Thanks
    Neha

    Hi,
    Bases on the solution you suggested, i tried the img component to change the image on OnMouseOver and OnMouseOut. Its working fine in a normal browser but doesnt work in Mobile browser. May be because mobile browser supports only trinidad components. I then tried the option of backing bean
    " Or you can expose the component to a backing bean by setting its "binding" attribute. JDeveloper can create a backing bean from the wizard if you don't already have one. This will get you a CoreImage object in the bean, and you can change the source with its setSource method."
    . So i bound the omMouseOver event of the trinidad image component to a backing bean. Inside that i am changing the source and refreshing the component.
    <tr:commandLink id="cl1" action="goAlerts" styleClass="listingLink2">
    <tr:image source="/images/alert.gif" id="i4"
    binding="#{Images.alertOnMouseOver}"
    onmouseover="#{Images.alertOnMouseOver}"/>
    </tr:commandLink>
    Images.java
    public void setAlertOnMouseOver(CoreImage alertOnMouseOver) {
    this.alertOnMouseOver = alertOnMouseOver;
    alertOnMouseOver.setSource("/images/alertSelect.gif");
    RequestContext context = RequestContext.getCurrentInstance();
    context.addPartialTarget(alertOnMouseOver);
    System.out.print("Test");
    So what i found is setAlertOnMouseOver is getting called but not MouseOver event but when the page is loaded. Can you please tell me where i am going wrong?

  • Error while enhancing the BP_ADDR component using BSP component workbench

    Hi ,
    I am trying to enhance the BP_ADDR component using the BSP component workbench. But when I try to regenerate GET_I methods of my context node, I am getting the following error:
    "Component GET_ADDRESS_GUID does not exist.
    Determination of BOL attributes failed"
    Please let me know the reason for this error and how to resolve it.
    Thanks
    Mreddy

    Hi,
    You may manually create the Get method for the attribute ADDRESS_GUID in your context node class.
    Regards
    Prasenjit

  • Table component uses outdated attributes

    The text editor's table plugin [The table component] uses outdated markup for centering items vertically in a table cell:
    It renders: <td valign="middle">
    instead of using the modern:
    <td style="vertical-align:middle">
    This breaks the layout. I need to find out how to update the table plugin for the text editor.
    Anyone knows how to fix this?
    Thanks in advance,
    David

    I got a patch from Adobe support:
    You can do this change in [1] around line 672. You can change it to [3].
    Note that isIE is declared in [2] around line 67. You can remove the setAttribute all together if you want to use style attribute for all browsers.
    [1] /libs/cq/ui/widgets/source/widgets/form/rte/commands/Table.js
    [2] /libs/cq/ui/widgets/source/ext/source/ext-core/src/core/Ext.js
    [3]
    if (config.valign) {
                if (config.valign != noneConfig) {
    com.setAttribute(dom, "valign", config.valign);
                    if (!CQ.Ext.isIE){
    dom.style.verticalAlign = config.valign;
                } else {
    com.removeAttribute(dom, "valign");
                    if (!CQ.Ext.isIE){
    dom.style.verticalAlign = "";
    Regards,
      Pierre Chamoun

  • How to skin the UI Component using AS3

    Hi,
    My application demands skinning the scroll bar component using  coding.
    Aware of manual skining but how can we change the skin programmatically using AS3.
    Help please.

    When you create content dynamically, using the dot notation doesn't work and you have to use getChild...  methods if you want to access via the parents.  However, you shouldn't need to do that since you already have a direct reference to the object...
    nextChild.addEventListener(MouseEvent.CLICK ,onChildClick);
    function onChildClick(evt:MouseEvent):void
    trace("Last Child is Clicked");
    You probably could have realized this when you were implementing this line (assuming it worked)...
    myChild.addChild(nextChild);
    With the parent approach to targeting, wouldn't you have tried to use... myMovie.myChild.addChild(nextChild); ?
    and "Click" should be "CLICK"

  • Component uses

    hi guru,
        what is  component uses in web dynpro abap.
    Edited by: crm_technical on Apr 30, 2011 5:09 AM

    You have made a cluster of posting today that all seem as though you are asking interview questions.  The tone of the questions combined with the subject matter would lead to this conclusion.
    Might I suggest instead that you search the forums and the WIKI as well as the SAP online Help.  I believe that you will find your answers to these very basic questions - particularly since each of these topics you posted have an entry in the online help. 
    I'm am locking these threads.

  • I lost my iPhone device, how can I get my data back on another one without using an iCloud backup just back up on i Tunes, Please Help.

    I lost my iPhone device, how can I get my data back on another one without using an iCloud backup just back up on i Tunes, Please Help.??

    You can find the backup files and then copy them to a safe place if you are worrying about this.
    iTunes places the backup files in these places:
    Mac: ~/Library/Application Support/MobileSync/Backup/
    The "~" represents your Home folder. If you don't see Library in your Home folder, hold Option and click the Go menu.
    Windows Vista, Windows 7, and Windows 8: \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    To quickly access the AppData folder, click Start. In the search bar, type %appdata%, then press Return.
    Windows XP: \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    To quickly access the Application Data folder, click Start, then choose Run. In the search bar, type %appdata%, then click OK.

  • We have a router at home supposed to support 10 devices but when i try to connect my mac book pro it says another device is using your computer's ip address

    we have a router at home that is supposed to support 10 devices but when i try to connect my mac book pro it says another device is using my computer's ip address

    Are the IP addresses statically assigned (wrong ), or does the router give them out using DHCP (right )?

  • I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    Hello AKCamus
    To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • When I close Photoshop CS6, the following message appears: "Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file.

    When I quit Photoshop CS6, the following message appears:
    " Could not save Preferences because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
    If I try to change the Workspace in PS6 from Essentials to any other Workspace, the following messsage appears:
    "Could not apply the workspace because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the ‘Get Info’ command in the Finder to ensure the file is unlocked and you have permission to access the file. If the problem persists, save the document to a different file or duplicate it in the Finder."
    I have checked the Sharing and Permissions section of the "Get Info" panel accessed from the Finder and I have set Read and Write Privileges for my user account for Photoshop CS6. System and Admin are also set to Read and Write.
    I have a MacBook Pro with OS X Version 10.9.5 and have all available updates for Photoshop CS6, Lightroom 5 and Bridge CS6.
    I tried uninstalling the program and downloading it again and reinstalling, but nothing changed.
    Can you help?
    Thanks,
    cjpnm

    You may get better help in Photoshop General Discussion
    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
    If FINDER means Mac, read below (and try to give more information when asking a question)
    Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

Maybe you are looking for