Nesting pages within pages?

I really like iWeb. Already I have redesign my .Mac homepage and created a new podcast site. However, I can't find any way to nest pages. In other words, I want to have a Photos page, and then put various albums inside that page. I dont want a new photos page for every set of photos. Rather, I want the top navigation to show Home About Photos Movies, Etc. Then when you click on Photos, you have options as to which albums you want to view. I am at a loss right now as to how to do that.
I suppose there are workarounds like publish a photo cast and then create a link to them...but that's not really what I had in mind.
Any ideas?

hi Randy,
You can try it this way...
-Highlight the Album page in the left hand column of iWeb
-Go to view>show inspector in the menu bar
-In the inspector window click on the second icon for "page"
-uncheck the box that says "include page in navigation menu"
-do this for each album page
On your Photo album menu page:
-Click the "T" in the toolbar to add a text box
-Drag the text box to where you want it and resize it
-double click in the box and type your album name
-now highlight the text and go to Insert>hyperlink>webpage
-The inspector will change to the Link menu
-check "enable as hyperlink"
-In the drop down menu, go to "one of my pages"
-choose the page and the hyperlink will be added
-do this for each album page
Example:
http://web.mac.com/loridilo/iWeb/

Similar Messages

Delete a "page" within pages

I am desperate to delete several pages within a saved Pages document. The problem is: it appears all my pages are "merged" or something. When I click "View - Page Thumbnails" the thumbsnails do appear on the left. However, I cannot select ONE page to delete. Whenever I attempt to click on ONE page it selects all of them. There is a bold yellow line that wraps around all of the pages preventing me from deleting one.
So I attempted to delete manually by going into the document and selecting the text. However, that ultimately selects the design aspects and then it deletes the designs on every single page throughout the document.
HELP! It can't be that **** hard to delete something.
Thanks.

Select and delete the content of the pages and the document will shrink accordingly. You don't actively add pages when you write in the document (in Word Processing documents that is) nor do you have to delete "pages". just delete the content you don't want just like when you delete one word you don't want.
With adding section break you are at risk at getting blank or near blank pages if you add content to a section.

Indesign CC 2014 crashes when duplicated pages within pages panel

running InDesign CC 2014 - mavericks 10.9.3. If I have content on say page one and within the pages panel I click and drag page one to the new page icon (something I do all the time to duplicate a page and it's content) it crashes InDesign. This is happening when I have copy pasted gradient mesh objects from illustrator to indesign. they paste in just fine, and I can copy paste those objects around, but not the whole page within the page panel

Hello march67,
Thanks for the test file. We could reproduce the crash.
We've identified the reason for the crash in your file. The problematic object is the RSS feed icon at the top right of the spread.
We've determined a fix for the crash and it should be available to all users in one of the upcoming patches. In the meanwhile, to prevent the crash, you could use the following workaround : Cut this object onto the clipboard. Duplicate the spread. Then paste the icon back in its place (Edit > Paste in Place).
Sorry for the trouble.
Thanks,
Ravi Kiran
Adobe InDesign team

Is there any way to do pages within pages?

This is the best way I can describe what I'm trying to do. I am creating an 8.5"x11 manual. Each page is broken into 4 separate squares (cards? tiles?), each with content about a particular product my company sells. The manual is in alpahabetical order, so when I have to insert a new product, I end up having to move around every tile that comes after it. I was wondering if there was any way to set up those tiles to behave like pages in InDesign, where I could just create a new one, and all of the others would automatically make room, by moving down the page and onto the next.
I have done them with a Data Merge before, but that seems needlessly difficult. I should also mention that I have other content on the page instead of just the cards, so I can't just have the pages be the size of the tiles and print 4 to a 8.5" x 11" page.

The short answer is no. What you can do is create a flow using linked text boxes and then insert elements into this.

How to skip to a new page within Pages?

This always used to work with ''Ctrl + Enter'', but now i've upgraded to the newest Pages, this doesn't work anymore, this is actually driving me mad and i can't find anywhere how to skip to a new page.. this is really anoying when working with big files where i have to change things on certain pages.
Thx in advance

Pages 5.1 is a bug - ridden disaster lacking about 100 features present in Pages 09. There are many complaints of data loss, corrupted Filene, docs that can't be opened etc. do not use it for any serious work. Pages 09 should still be on your system. Use that instead

Report Row With Detail (IFRAME) - How to reload Main Page within iFrame

Hi,
Based on Carl's example - Report Row With Detail (IFRAME), i.e:
http://htmldb.oracle.com/pls/otn/f?p=11933:17
Within my scenario, I have a button within the iframe section of my report that calls a pl/sql process that performs some database processing.
What I basically need is a means of performing a page refresh of the main page, when this button within the iframe is pressed. In Carl's example, that would be page 17.
As mentioned, I call a PL/SQL process within the iframe, but unsure how to then refresh the main page - parent page.
Any help would be appreciated.
Thanks.
Tony.

Tony,
you could insert the following script to the region footer of a region located on your "iframe"-page.
<script>
parent.location.reload();
</script>
But this is dangerous because everytime the parent is being reloaded, the iframe is loaded, too. Risk of loop...
A possible solution is to conditionally display a html region (with the script) on your iframe-page basing on a request. You could post the request as a result after your plsql processing in a branch.
Regards,
Jens

Simple button action that goes to a page within the same doc

I can't figure this out. I have a button I want to use that takes a person back to the first, or second page of the same doc. It's a catalog section with a table of contents. I need to make links for the pdf that takes people to certain pages within the same document.
In the Buttons panel, I see how to make the button, but when I assign an action, the only choice that makes sense is "Go To Destination", but I don't get or see any way to choose "page 2" of the document, or another selection method.
I did this before a few years ago on hundreds of pages, and when I open those old documents up to copy/paste the same buttons, they don't even appear to have actions on them anymore, as if it never happened.
So, what's the secret? Certainly there's a way to link to another page in the same ID file, no?

Finally figured it out. I do NOT use the button panel at all. No buttons needed. Just select the grouped object that I want for my button, and hit the "add hyperlink" button in the Hyperlink panel. Then choose "Page" from the menu that opens up and be on my way. What was throwing me for a bad loop, was that I had copied and pasted the button graphic form another document. Well, since the link made previously was broken now, I had the red flag in the Hyperlinks panel...and thus, the "new hyperlink" button was greyed out, sending me in circles. The minute I deleted the old hyperlink it carried over from the old document, the new hyperlink button worked again and all was well.
Thanks.

How to merge pages within the same document?

Can I merge pages within the same pdf document? I have two large maps, an east and west, can I put the two pages together to make one map?

How different are the layouts?
You can vary the left and right pages:
+Inspector > Layout > Section > Configuration > Left and right pages are different+
But the position of the headers, footers and margins will be the same.
You could make different designs and capture those but each would have to be its own section. This sort of thing works better in Layout mode, where every page is a different section, but you won't get automatic text flow nor TOC, footnotes etc.
Pages rapidly gets very clumsy when you try to do detail layout to this extent.
Peter

How do I move a section of Pages within a document ?

Hi there,
I am writing my thesis and I want to move a group of 6 pages (representing a chapter) from one area of my document to another. I inserted a 'Section Break' at the end of the page preceeding the first page of my grouping, and inserted another at the end of the 6th page of my grouping. I've done this for all the chapter groupings of my document.
When I look at the thumbnail view on the side of the document, I can see that each chapter grouping is enclosed by a yellow line box if I click on a page within the chapter grouping. So far so good, I think. Except now when I click of one of those groupings and try to drag it and insert it in between two other other chapter groupings i.e. I'm trying to reorganise my chapter order, it doesn't move the section I want to move at all.
Can anyone tell me what I'm doing wrong ? Thanks in advance.
Matt.

Thanks for your advice Peter.
I continued to play around with trying to move the sections around (I didn't change any sectioning to what I had previously done). I found out - and I don't know why - that I could not move sections upwards as I was trying to do...only downwards.
So I eventually reorganised my sections by strategically moving them downwards until I had the document looking like I wanted it to. Still strikes me as odd. It was like doing one of those puzzles, deciding which block goes where without moving up, in as few moves as possible - but I eventually got it done.

Pages 5.2 - When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?

When I try to reorder different pages it just takes all the pages within the document and turns them into a stack! Why is this happening and how can I oder pages as the update is meant to let me?
Any Help?I know the update has only been out a while but if anyone has an idea why it is doing this, please let me know!

But you are telling me something I already know.
Be precise.
It is not Pages '09 that is broken.
I am back in Mavericks and testing Pages 5.2.
There are improvements, we shall see how useful, but in less than a minute I have already discovered bugs.
Peter

Table Problem x2 within Pages: 1) In the Header; 2) Maintaining a table's starting point when carrying over to the next page.

Pages '09 v4.1
Problem 1:
     I am working with a 2-column Page document. Its my goal to have three items listed in a header in particular positions. Far left shows the paragraph number the page starts with, in the center is a title of the contents of the page, and on the far left is the last paragraph number to appear. To place these three items in the desired positions requires the insertion of a lot of spacing on both sides of the 'centered' title along with counting the characters of the title to find its center to alighn with the center of the page. 253 pages of this to will qualify me to be labled with a severe case of Obsessive Compulsive Disorder. I don't want OCD.
     However, by installing a one row/3 column table in the header my task was made a lot easier in alighnments. But, another problem reared up. Within the header underneath the table is a vertical space remaining. This vertical 'tallness' is equivalent to the font size of 10. Its taking up too much space between the header and the text. It needs to be reduced or eliminated.
     On the left-hand page I am able to reduce the font as far down as '1'. I've settled on using '3'. However, on the right-hand page the font will not accept any size selections be they less or more and remains stubbornly at font 10. Within a Header that does not have a table, I am able to change the font of both left and right pages.
     Is there a another way to approach what I desire for the header other than installing a table in it? Is there a way to alter the font on the right hand pages?
Problem 2:
     Whenever I create a table following text already on a page all is right until the table's growth in construction laps over to the next page. At that point the first row snaps to the top of the following page leaving an undesired area (space) between the last line of the text on the preceding page. Whenever I attempt to drag the table to the desired position it snaps back. This only happens when the table is larger than the remaining area of the page. If the table is started at the top of an unused page and runs beyond the confines of that page than it continues as expected onto the next page duplicating the table header. But to do this it must begin at the top of an unused page. Is there a means to have a table placed in the remaining space of a page and what does not fit continues to the next page in effect having a partial of the table on each page?
So there you have it. Christmas is over and its back to work. Thank-you for your attention.

Regards re-positioning a table:
I went to Inspector>Wrap>Object Placement/Inline (moves with text) and found that the inline option was selected. Some of the rows within the table have two lines of text. Again, I dragged the table to the desired position on a page that is partially composed with text and got the same results as before - the table snapping back to the top of the following page where it initially resided. In this current position the 2-page table does break as it should on the following 3rd page. Below is a schematic of the appearance of the 2-pages involved.
Page 1 left side.
TEXT 1-line as 1-column
TABLE (5-rows)
TEXT (2-columns) 14-lines left column and 13-lines right column.
[Layout Break] otherwise the above textual columns would be all on the left side of the page.
TEXT 1-line as 1-column
* The desired insertion point for a two page table on a page that is 40% filled with the above descriptions.
Page 2 right side.
A 2-page table flowing or breaking into a 3rd page.
Page 3 left side.
The overflow of the subject table.
[Layout Break]
[Section Break]
Is there some other way to anchor a table to the text other than Inspector>Wrap>Object Placement/Inline (moves with text)?

Hyperlink from within a Word Document to a specific page within a PDF document.

I was hoping that someone would be able to assist me. I would like to create a hyperlink (used as a citation) on my Word document that opens directly to a specified page within a PDF document (possible other word docs and so on, but less
often). How do I go about performing this? Another note, all the documents would reside within a SharePoint site.

I was hoping that someone would be able to assist me. I would like to create a hyperlink (used as a citation) on my Word document that opens directly to a specified page within a PDF document (possible other word docs and so on,
but less often). How do I go about performing this? Another note, all the documents would reside within a SharePoint site.
I am not a Word guru, but I don't think you can run a macro from a hyperlink. But you can create an active X label that runs a macro when clicked. You can use the following macro to go to a specific page in a PDF file.
Sub OpenPDFPageView(DisplayPage As Integer)
'In order to use the macro you must enable the Acrobat library from VBA editor:
'Go to Tools -> References -> Adobe Acrobat xx.0 Type Library, where xx depends
'on your Acrobat Professional version (i.e. 9.0 or 10.0) you have installed to your PC.
Dim PDFApp As AcroApp
Dim PDFDoc As AcroAVDoc
Dim PDFPageView As AcroAvPageView
Dim PDFPath As String
Dim DisplayPage As Integer
PDFPath = "C:\Users\doudou\documents\test1.pdf"
'Set the page you want to be displayed
'DisplayPage = 3
'Initialize Acrobat by creating App object
Set PDFApp = CreateObject("AcroExch.App")
'Set AVDoc object
Set PDFDoc = CreateObject("AcroExch.AVDoc")
'Open the PDF
If PDFDoc.Open(PDFPath, "") = True Then
PDFDoc.BringToFront
'Maximize the document
Call PDFDoc.Maximize(True)
Set PDFPageView = PDFDoc.GetAVPageView()
'Go to the desired page
'The first page is 0
Call PDFPageView.GoTo(DisplayPage - 1)
'Set the page view of the pdf
Call PDFPageView.ZoomTo(2, 50)
End If
Set PDFApp = Nothing
Set PDFDoc = Nothing
On Error Resume Next
'Show the adobe application
PDFApp.Show
'Set the focus to adobe acrobat pro
AppActivate "Adobe Acrobat Pro"
End Sub

Why do I have to re-zoom (via ctrl +) after renavigating to every page (ie, clicking on various pages within Facebook site)

I have Firefox 3.6.13 on a high-resolution (1920x1200) laptop screen. It used to be that I could CTRL+ and zoom in on a website such as Facebook.com or NYT.com once, and then every time I clicked on a page within that site, such as one individuals' Facebook profile or one NYT article, it would remember my zoom settings and allow me to read comfortably. However now, every time I click on a new page, it resets the zoom to the default, which is very small font. The default is way too small for my eyes. This is becoming a huge problem as every time I navigate to a new page, I have to squint to see what's there and resize/zoom. I have to do this thousands of times a day??

If you need to increase (or decrease) the font size on websites then look at NoSquint or Default FullZoom Level.
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
If you need to increase or decrease the size of fonts and other elements in the user interface and web pages then increase the String pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 steps to see what works best.
In current Firefox versions this pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely.
See also http://kb.mozillazine.org/about%3Aconfig

RUSH HELP!! Use button to "go to" a certain page within a document

I need to do something like a hyperlink to take me to a certain page within my adobe document I have added buttons but I dont know what scripting to use to "call" the page that I need. I have a long document and do not want the end user to have to scroll through it all

Please refer to xfa.host.setFocus() method in documentation. That might help. Please post your findings.
Good Luck,
SekharN

Go to a specific page within the PDF

Hi,
I try to figure out how to make a link to another page within the PDF doc.
I tried with a button, but cannot specify the page number where I want the link.
Does anyone can help me to make a link on a specific page within my doc?
thanks

This article should be of some help: http://acrobatusers.com/tutorials/how-do-i-link-button-specific-page-my-pdf-document

Nesting pages within pages?

Similar Messages

Maybe you are looking for