Net access via wireless PC - possible?
I have a Power PC Mac Mini (as well as an eMac) that I'll be taking on an extended holiday with me. I also have a laptop pc with a wi-fi card, whereas my mac mini has no wireless capablility. Now, my question is, is it possible connect to the net on my Mini by using the wi-fi capabilities of the laptop PC, with my mac mini networked via an ethernet cable to the laptop? I was under the impression that you can 'piggy back' this way, but I could use some confirmation.
Thanks in advance
Mr.Gone
Mac Mini 1.25gHz 1gig Ram & eMac 1.42gHz 1.25Gig RAM Mac OS X (10.4.7)
Hi Simon,
yes, it is possible to do this. First, you have to configure your PC to access the internet wirelessly. Then you have to enable internet sharing and DHCP on your PC. Last, connect your Mac via ethernet, open System Preferences > Network, select "Built-In-Ethernet" and set it to use DHCP.
-Petra
Similar Messages
-
E4200v2: Local Management Access via Wireless *ALWAYS* Enabled
I just found a slightly unsettling bug in the E4200v2 (running the latest firmware 2.0.36 build 126507).
Administration > Local Management Access > Access via Wireless ... set to DISABLED.
HOWEVER, when I attempted to access the web interface on a handy iPAD I had absolutely no problem getting through to the web interface (after providing username and passsword).
Limiting access to wired clients seems like a simple a prudent measure ... which is why this option is there for the paranoid among us.
This seems like a black-and-white bug. Comments welcome. Fix in the next firmware revisio even more welcome.It was mentioned in another thread that disabling wireless management does indeed disable http access over port 80. However, if you're using https access--which uses port 443, that access is not blocked. So for anyone who wants to disable wireless management access, you need to enable management access via http only, and then disable the wireless access. That combination will indeed work.
I have confirmed this on my own router and can now only manage via wired connections over http.
Strange bug/oversight! -
Not able to get internet access via wireless
When connected via hardwired or sprint pcs card and am able to access internet with not issues. When connected via airport I cannot. When checking the settings of airport everything looks correct (ip, router, netmask, etc.). Went to Apple store they played with the laptop and it started working, they made no changes they said. Got home with laptop and again no internet. My Windows based laptops/pc are able to use the same wireless access point and access the internet with out issue.
Is there away to reset airport? or some mac tools to help identify the issue?Robert Jenkin wrote:
Is there away to reset airport? or some mac tools to help identify the issue?
You might try resetting your connection settings using the steps listed in this message:
http://discussions.apple.com/thread.jspa?messageID=10695921&start=1
They're not guaranteed to solve the problem, but they'll only take you a minute or so to try. -
Conneced to wireless router but no internet access via wireless
I don't recall the physical connections being directly attached to the router. The router in question is a Linksys WRT54G/GL/GS. My initial thought was since we rolled out Voip fairly recently one of our phones might have ganked the IP address, but that is not the case. Each of them have their own IP addresses and I don't see any conflicts. I am also able to ping the router and log into it remotely from my office, which is in a different city. Could it possibly be a firmware issue?
Hi Everyone,
One of my offices' routers is broadcasting but has no internet access. The office does have internet if you hardwire in but outside of that nothing has worked so far in regards to the WiFi. I have power cycled the router and modem to no avail and DHCP is enabled but no one can get online via WiFi. It seemed to just up and decide one morning that it was not going to allow internet access.
This topic first appeared in the Spiceworks Community -
Mx880 connected to LAN. Cannot access via wireless. ???
I have an end user on campus who has a Canon MX880 multi-function printer/copier/scanner, etc. I have it configured to a specific IP address, and connected to the college LAN via data cable, data drop. The drop is good, I have tested with a laptop. I manually set the IP4 settings on the MX880, and can ping the printer when connected via ethernet to LAN. As soon as I try to get on the the college wireless LAN, I can't ping it. I took another laptop, disconnected the data cable from the printer, plugged it into the laptop, and manually config'd the laptop to the same manual IP4 settings as the printer is set to. This time, from the other laptop, I can ping connected to the printer port wirelessly or when ethernet connected. So there is nothing wrong with the campus wired or wireless network. It's only when I try and ping the MX880, via the campus wireless network, that I have a problem. Again, I have the MX880 ethernet connected to a data drop. I have the LAN settings enabled, and IP4 manually set. I can ping the printer IP address when ethernet connected from somewhere else on the network, but I can't when I'm using the campus wireless network. And again, If I use two laptops, one used in place of the printer, but set to same IP settings, I have no problem pinging the IP address via LAN or campus wireless. Any ideas???
Most public networks (like the ones on a college campus) have built in firewalls that prevent communication between devices. They're designed primarily to give a device internet access but not to let 2 devices on the network talk to each other for security purposes (so the guy in the dorm next to you can't hack your computer). Trying to use the printer with a public network probably wont work.
-
Hi,
I'm looking to enforce internet usage rules during a typing class. Is there a way to block access to Safari for only certain times under OpenDirectory and/or the Workgroup Manager? I have kids that need access at other times of the day, but during one particular period I'd like to be able to disable their net access.It should be possible with 24 'recurring' statements.
-
Bridge to bridge and bridge to access-point via wireless is it possible.
here;s my topology i am trying to configure. i have a router whose ethernet is connected to a bridge.this bridge 1 is connected to a bridge 2 via wireless. now i am trying to connect a access-point via wireless to this bridge2. is it possible for bridge 2 to support connectivity to the bridge1 and the access-point both of them via wireless.
can someone pls help me on this.
waiting for someone to reply.
regards
sebastanYou can set up each radio in the access point for different functionality. Considering the scenario, this can be done by setting up the SSID for the G radio and another SSID for the A radio. Then, set the role in the radio network parameter for the G radio to access point and for the A radio to the root bridge role.
ou can prevent unauthorized users from reconfiguring your access point/bridge and viewing configuration information. Typically, you want network administrators to have access to the access point/bridge while you restrict access to users who connect through a terminal or workstation from within the local network.
To prevent unauthorized access to your access point/bridge, you should configure one of these security features:
Username and password pairs, which are locally stored on the access point/bridge. These pairs authenticate each user before that user can access the access point/bridge. You can also assign a specific privilege level (read only or read/write) to each username and password pair.
http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a00804ed6d4.html -
Web-UI error message "Access via 'NULL' object reference not possible"
I need some help, I'm not a Basis person but I need to get this connection problem resolve.
This problem is in our DEV ICWeb system. After logging in to Web-UI, I got a error message "Access via 'NULL' object reference not possible". We have 3 clients (100, 220, & 310) in DEV and all 3 clients are giving me the same error message.
From the help.sap.com, I found this topic http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
but in the document it asked to go to SM59 to check the ESH_APPL_WS_TEMPLATEENGINE destination. But we don't have that destination setup in all our systems.
Here is the complete error message:
Error when processing your request
What has happened?
The URL http://crm-dev.staff.copa:8000/sap/bc/bsp/sap/crm_ui_frame/BSPWDApplication.do was not called due to an error.
Note
■The following error text was processed in the system CD1 : Access via 'NULL' object reference not possible.
■The error occurred on the application server CRM-DEV_CD1_00 and in the work process 0 .
■The termination type was: RABAX_STATE
■The ABAP call stack was:
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: GET_DATA_LOSS_HANDLER of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: EH_TRIGGER_NAVIGATION of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: SET_WORKAREA_CONTENT of program CL_CRM_UI_CORE_APPL_CONTROLLERCP
Method: PROCESS_NAV_QUEUE of program CL_BSP_WD_VIEW_MANAGER========CP
Method: DO_INIT of program CL_CRM_UI_FRAME_APP_CONTROLLERCP
Method: DO_INIT of program CL_BSP_CTRL_ADAPTER===========CP
Method: GET_PAGE_CONTEXT_CURRENT of program CL_BSP_CONTEXT================CP
Method: ON_REQUEST_ENTER of program CL_BSP_RUNTIME================CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
What can I do?
■If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CD1 in transaction ST22.
■If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server CRM-DEV_CD1_00 in transaction SM21.Hi Michael,
Refer to the link below and check the procedure.
http://help.sap.com/saphelp_nwes70/helpdata/en/84/43f0d786304e19a652a8f80909a8ec/content.htm
Regards,
Arjun -
Hi all ,
Im getting the below error , actually recently i created my own custom table zstudent, later i wrote select query to fetch data from the same and dump at internal table and then bind this to the table node.
But im getting below error, even i removed the select query still same error is occuring.
Error when processing your request
What has happened?
The URL http://********00.*****b.com:8000/sap/bc/webdynpro/sap/zdemo_student/ was not called due to an error.
Note
The following error text was processed in the system IDS : Access via 'NULL' object reference not possible.
The error occurred on the application server axsids00_IDS_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: WDDOINIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/YUSM2Q74A826Y0JY1I4V==CP
Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
Method: IF_WDR_RUNTIME~CREATE of program CL_WDR_MAIN_TASK==============CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CPThanks Rama,
Acutally i accidentally commented the lo_nd_student = wd_context ....etc
this line was commented .
i have one small requirement to fetch data from local customised table and fill the same to internal table and bind that to table node.
my table node is student having attributes as name , city and number , all are of type strings.
now i created one custom table zstudent having ID - char of length 10,
name of type string
city of type string
num of type string
i have inserted records
but when i use select query to fill data from this zstudent to my internal table of type lt_student type wd_this->elements_student ,
im getting same above error. -
Hi Guru's,
i am new for WebDynpro programming.I am trying to use select-options tutorial.
System showing select options and table binding on screen when i test the application.
I have using search button to get the value which user will i/p.for that onaction method created, i have writen the code to get the values which user will input.
Method given below is of componentcontroler
method wddoinit .
data: lt_range_table type ref to data,
rt_range_table type ref to data,
read_only type abap_bool,
lt_range_table1 type ref to data.
data: lr_componentcontroller type ref to ig_componentcontroller,
l_ref_cmp_usage type ref to if_wd_component_usage.
create the used component
l_ref_cmp_usage = wd_this->wd_cpuse_select_options( ).
if l_ref_cmp_usage->has_active_component( ) is initial.
l_ref_cmp_usage->create_component( ).
endif.
wd_this->m_wd_select_options = wd_this->wd_cpifc_select_options( ).
wd_this->m_handler = wd_this->m_wd_select_options->init_selection_screen( ).
wd_this->m_handler->set_global_options(
i_display_btn_cancel = abap_false
i_display_btn_check = abap_false
i_display_btn_reset = abap_false
i_display_btn_execute = abap_false ).
lt_range_table = wd_this->m_handler->create_range_table( i_typename = 'S_CARR_ID' ).
wd_this->m_handler->add_selection_field( i_id = 'CARRID'
it_result = lt_range_table i_read_only = read_only ).
call method wd_this->m_handler->add_horizontal_divider
exporting
i_id = 'LINE'.
endmethod.
Method given below is of VIEW.
method ONACTIONSEARCH .
DATA: NODE_FLIGHTS TYPE REF TO IF_WD_CONTEXT_NODE.
DATA: RT_CARRID TYPE REF TO DATA.
DATA: ISFLIGHT TYPE TABLE OF SFLIGHT.
DATA: WSFLIGHT TYPE SFLIGHT.
FIELD-SYMBOLS: <FS_CARRID> TYPE TABLE.
Retrieve the data from the select option
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Assign it to a field symbol
ASSIGN RT_CARRID->* TO <FS_CARRID>.
CLEAR ISFLIGHT. REFRESH ISFLIGHT.
SELECT * INTO CORRESPONDING FIELDS OF TABLE ISFLIGHT FROM SFLIGHT
WHERE CARRID IN <FS_CARRID>.
NODE_FLIGHTS = WD_CONTEXT->GET_CHILD_NODE( NAME = `FLIGHTS` ).
NODE_FLIGHTS->BIND_ELEMENTS( ISFLIGHT ).
endmethod.
while executing appln. error is trigger on line given below
RT_CARRID = WD_THIS->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD( I_ID = 'S_CARR_ID' ).
Err: The following error text was processed in the system BCD : Access via 'NULL' object reference not possible.
please help me out on this issue.
Thanks and Regards
Vinayak Sapkalhi ,
The attribute M_HANDLER is an attirbute of component controller (as told by your post) and so you cannot access it as you have done it.
You will have to access it as .
WD_COMP_CONTROLLER->M_HANDLER->GET_RANGE_TABLE_OF_SEL_FIELD(I_ID = 'S_CARR_ID' ).
Try doing it.
Or else , if you have created a similar attribute in your view itself , then it is "INITIAL" and hence you are getting the dump.
You will have to assign the view attribute "M_HANDLER" with the value of your component controller attribute "M_HANDLER" ,because all the initializations are done in WDDOINIT of comp controller and on component controller atribute "M_HANDLER".
Thanks,
aditya. -
Runtime error in WebDynpro - Access via 'NULL' object reference not possibl
Hi,
Structure of the CONTEXT in the VIEW::
WDSCREEN1
--> IMPORTING
--> S_KUNNR <- its a select option
--> EXPORTING
--> T_REPORT <- Which is table to hold the output data (with 4 fields)
In the context area i have root node (WDSCREEN1) and Sub nodes are IMPORTING and EXPORTING and child nodes as shown above. When i am referring them everything is fine except T_REPORT.
* Declaration
DATA: node TYPE REF TO if_wd_context_node,
node_exporting TYPE REF TO if_wd_context_node,
node_importing TYPE REF TO if_wd_context_node,
node_report TYPE REF TO if_wd_context_node,
node = wd_context->get_child_node( wd_this->wdctx_wdscreeb1 ).
node_exporting = node->get_child_node( wd_this->wdctx_exporting ).
node_importing = node->get_child_node( wd_this->wdctx_importing ).
* Bind the data to the context
node_report = node_exporting->get_child_node( name = 'T_REPORT` ).
node_report->bind_elements( lt_report ).
Its giving run time error 'Access via 'NULL' object reference not possible. ' when it comes to ' node_report->bind_elements( lt_report ).' I checked the content while debugging and found that it was initial. Not sure why Node_report is initial. all others have data.
node ->
node_exporting ->
node_importing ->
node_report ->http://wiki.sdn.sap.com/wiki/display/EP/PointersforTroubleshootingPortalRuntime+Errors
Hope this helps.
-Veer -
is it possible to show a presentation from the original iPad via wireless on an older projector with no HDMI input? If so, what equipment is needed?
The ipad not support wireless projector yet.
The workaround is you are using computer that connected wirelessly [needs 2 wireless adapter] / via cable to projector and connected also to the wireless router.
You are controlling the computer via wireless connected to the router using remote desktop app like splashtop, teamviewer, logmein, vnc, etc. You must set the remote desktop port and app at the computer too as ipad app support. -
IC WEBCLIENT: Access via 'NULL' object reference not possible
Hi,
Iam working in ABAP, and learning CRM ABAP on CRM5.0 IDES Demo system I was trying to create a new WebIC by copying one view from CRM_IC to ZCRM_IC bsp application. Following are the steps I following according to Cook book documentation.
1. I copied BuPaDisplayCustomer view and controller from CRM_IC to ZCRM_IC from
BSP_WD_WORKBENCH by selecting CRM_IC and runtime profile = 'DEFAULT'.
2. Created a runtime profile from SPRO->CRM->IC Webclient->Customer specific modifications->Define
runtime profile.
3. Copied the 'DEFAULT' runtime profile to my new profile 'Z_COOKBOOK'. Assign 'ZCRM_IC' by
clicking on 'Controller and substitues'.
BSP Replaced Controller BSP ReplacmentController
CRM_IC BuPaMoreContactView Z_CRM_IC BuPaMoreContactView
4. Define IC Webclient profile:
SPRO->CRM->IC Webclient->Define IC Webclient profile->Copy the DEFAULT profile and assign it to
'Z_COOKBOOK',
5. Assigned the Webclient profile to the user from t-code 'PPOMW'. Selected 'USER' from the
existing 'Position' and Goto->Detail object->Enhanced obj descrption.Selected IC webclient from the
list and created Infotype assigned Webclient profile 'Z_COOKBOOK'.
6. Execute the ZCRM_IC from SE80 by rightclick and Test. Here is my problem,Iam receiving the
following error in the webpage.
The following error text was processed in the system CR7 :
Access via 'NULL' object reference not possible.
The error occurred on the application server CR7_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: SET_MODELS of program CL_CRM_IC_BUPADISPCUSTOME=====CP
Method: SET_MODELS of program CL_CRM_IC_BUPADISPCUSTOME=====CP
Method: SET_MODELS of program CL_CRM_IC_BUPADISPCUSTOME_IMPLCP
Method: DO_REQUEST of program CL_BSP_WD_VIEW_CONTROLLER=====CP
Method: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Method: ON_REQUEST of program CL_BSP_RUNTIME================CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_HTTP_EXT_BSP===============CP
Method: EXECUTE_REQUEST_FROM_MEMORY of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
I check the CRM services and all are active, using IE8 web browser. I just copied the view and controller
from CRM_IC into Custom BSP application i.e., ZCRM_IC.
Above error is occuring even If i run the standard CRM_IC BSP application and select one simple view.
from SE80.
Not sure whether any additional configuration or any special roles to be assigned to the Webclient profile.
Thanks,
Venn.hello swapna,
we are facing the same error while accessing the leave request link, all jco are testing fine, i checked backend connection and its fine, please tel me how did u resolved that issue,
Thanks in advance.....
ajay -
No access via webinterface possible
hey,
i'm working with oracle 11g for a few weeks now. But now i have a problem and need some help.
Yesterday, i deleted the database and created a new one. afterwards i configured the listener. during the listener configuration i recieved a port error (standard port is used by another application). i told oracle to go on because i thought the error ocured because of another application in the background, but i was wrong.
now i am not able to access the oracle webinterface. but i'm able to access via sql developer.
who can help me to get webaccess again?
cu and thx
itchy2yes the instance is ccrfinal.
i will translate it as good as possible:
C:\Documents and Settings\dufdmz>lsnrctl
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 01-JUL-2010 16:00
:48
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Willkommen in LSNRCTL. Geben Sie "help" ein, um Information zu erhalten.
LSNRCTL> status
Sign in on (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=DEBONWNC6010890.dp-itsol
utions.de)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Beginning date 30-JUN-2010 18:57:17
Uptime 0 Tage 21 Std. 3 Min. 35 Sek.
Trace-level off
security ON: Local OS Authentication
SNMP OFF
Parameter file of the listener C:\app\team\product\11.2.0\dbhome_2\network\admin\listener.ora
Log-File of the Listener c:\app\team\diag\tnslsnr\DEBONWNC6010890\listener\alert\log.xml
Summary/Conlusion of the listening endpoints
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEBONWNC6010890.dp-itsolutions.de)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEBONWNC6010890.dp-itsolutions.de)(PORT=9090))(Presentation=HTTP)(Session=RAW))
Service Overview
Service "CCRfinal" has 2 instances
Instance "CCRfinal", Status UNKNOWN, has 1 Handler for this service
Instance "ccrfinal", Status READY, has 1 Handler for this service...
Service "CCRfinalXDB" has 1 Instance.
Instance "ccrfinal", Status READY, has 1 Handler for this service...
Service "CLRExtProc" has 1 Instance.
Instance "CLRExtProc", Status UNKNOWN, has 1 Handler for this service...
The command has been executed successfully
LSNRCTL>
I tried to change the port of the http listener before to 9090 but there was no possibility to get access to the webinterface. -
WebDynpro Abap MSS: Access via "NULL" object reference not possible
hi,
My customer send me the following link to Appraisal Documents (Manager) MSS
http://server.sap.portal:1810/sap/bc/webdynpro/sap/HAP_START_PAGE_POWL_UI_MSS/
http://a.imageshack.us/img685/5959/mss3.jpg (logon in Costumer SAP System)
http://a.imageshack.us/img225/4008/mss4.jpg (Appraisal Documents (Manager) MSS run succesful)
Link that also run by the SICF in my customer is correct.
But when I run in my SAP System see the following error
http://a.imageshack.us/img715/5355/mss1j.jpg (SCIF in my SAP System)
http://a.imageshack.us/img44/5346/mss2.jpg (SCIF - test service)
http://a.imageshack.us/img840/1677/mss2b.jpg (Error, without window logon)
<b> Access via "NULL" object reference not possible</b>
Other question is: In what part of MSS is this option? because the ESS is in Career and Jobs / Appraisals Documents
http://a.imageshack.us/img683/9900/careerjob3.jpg (Employee Self Service / Career and Jobs / Appraisals Documents)
thanks for your posts and answer
IvanHello
The most important information is (again) missing: which object reference is initial ("NULL")?
The ABAP dump will tell you.
Below I show an example how this can happen (and be avoided):
LOOP AT lt_accountings INTO ls_accounting.
lo_po_account ?= ls_accounting-accounting.
ENDLOOP.
" QUESTION: Are you sure that lo_po_account hold an instance ???
" If LO_PO_ACCOUNT is empty the following statement will give you the dump.
ls_mepoaccounting = lo_po_account->get_data( ).
" And that is how to avoid this (at least the dump. Whether your logic is still ok is another matter...)
CHECK ( lo_po_account IS BOUND ).
ls_mepoaccounting = lo_po_account->get_data( ).
Regards
Uwe
Maybe you are looking for
-
Service Requests-Business days when year changes
Hi All, I am trying to calculate for how long a SR has been open in business days only. I have successfully used Mike Lairson's formula for the last 9 months but it seems it cannot cope with year changes. If the begin data is in 2009 and the end date
-
I was wondering if u knew how to download the songs off of my daughters ipod touch to my iphone 4s. We do have 2 different libraries
-
Dear All, When ever I am creating a purchase order system issuing a warning messages like mentioned below: <b>Effective price lower than material price (variance > 30.00 %) Effective price is 0.00 INR, material price is 80.00 INR</b> Can you suggest
-
Hi In addition to my [previous post|http://forums.sun.com/thread.jspa?threadID=5336770&messageID=10453744#10453744], I have the following need: In a rule how can we use something like a "checkout view" ? I would like to have something like what is di
-
Aggregate Storage And Multi-Threading/Multi-Core Systems
Please pardon if this question has been asked before, but the Forum search is not returning any relevant results. We are in the process of purchasing hardware for an 11.1.2 Essbase environment. We are going 64-bit, on Windows 2008, with either 32 GB