Net connection trouble: "No Ethernet cable connected or the device is not responding"

Hello
I have been plagued by a dropping Net connection for a couple of months, and as it has been getting worse lately I have tried to sort out the problem.
I have simplyfied my connection between the computers and the VSDL fiber modem by bypassing my AirPort Express and Ethernet hub and connecting the three computers directly to the built in ports on the modem.
Since I did that a new error message has started appearing on my Mac Mini, saying that I have no Ethernet cable connected to the modem, or the device is not responding. At the moment I have two of the machines connected, and the Mac Book Air seems to work without problems. There are lights on the Ethernet ports on the modem, and they are lighting up for the iBook even when the Mac Mini connection drops. When the Mac Mini connection drops the lights go off on its Ethernet port on the modem.
This seems to point to some sort of trouble with the Mac Mini. Is there a way to monitor what's going on? Can I use Terminal, for instace? It can't be the settings, and it cant' be the cable, so it must be related to the hardware I suppose. I am using DHCP to connect to the modem.
The connection drops arbitrarily, sometimes for long periods of time, and then comes back up again by itself.
Any ideas for trouble shooting etc?
Best
Hans Karlsson

BDAqua
Thanks again. Unfortunately, the problems are back again. Had a stable connection and connected the AirPort again. Everything was working fine. Then all of a sudden the connection dropped again today.h
Connected a LAN cable directly to my MacBook Air and got the connection to work immediately.
Took that cable and connected to my MacMini, again, connection came back immediately.
The AirPort (in Brigde Mode) is also connected, but gives me a blinking orange light, and the same "no cable or (modem) is not responding" message again.
I guess this must rule out hardware problems in the computers.
Ligth for the LAN cable port on the modem connected to AirPort is dead. Moved the cable to another port, light still dead.
Shut down AirPort Express, still same orange blinking light when I switched it on.
I now suspect there is something going on with the AirPort Express. Just bought it, and I had the same problem with it's predecessor, but...
Is there any way to trouble shoot the AirPort Express?
I can connect to it Wirelessly, But AirPort Utility says it has been removed from the Network. In the Network Preferences it says it has a self-assigned IP. For Network Settings I get green lights for everything except Network Settings, which gives me a yellow light. It also says the Internet connetcion is working correctly.
Indeed, when I made the direct Ethernet connection inactive I still get a working connection over WiFi, in spite of the blinking orange light on the AirPort and a yellow light for Network settings in Prefereces....
In the console things look normal:
8/7/12 10:04:27.269 PM Apple80211 framework[231]:
com.apple.message.domain: com.apple.wifi.timeout.scan
com.apple.message.signature: Success
com.apple.message.result: pass
com.apple.message.value: 3149.000000
com.apple.message.summarize: YES
Still confused

Similar Messages

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. Any tips on how to do this?

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I am trying to connect a Windows 7 / 64 bit to an Epson printer on my Mac. The printer is hooked into the Mac via USB; the Mac is networked to a Linksys wireless router with an ethernet cable, as is the Windows box. I installed the current Bonjour printer services software on the Windows machine, and separately installed the driver software for the Epson printer on the WIndows machine. Running the bonjour wizard, I get an alert saying 'I don't have sufficient access to my computer to connect to the selected printer'.
The printer has 'sharing' turned on from the Mac end; this works with a Powerbook via the wireless connection. Sharing is also turned on in the Windows printer control panel for this printer (under properties). The Mac is a G5 running 10.5.8. When I try to print a page from the Windows machine it gets hung in the print queue.
Any advice how to proceed would be appreciated!
thx,

I have a Macbook Pro (2013) OS 10.8.1. Moved into a university house and need to use ethernet cable. Bought the Thunderbold connection but when I try to use the ethernet with it a webpage comes up saying Wireless Setup? No idea what to do.

I have a Macbook Pro (2013) OS 10.8.1. Moved into a university house and need to use ethernet cable. Bought the Thunderbold connection but when I try to use the ethernet with it a webpage comes up saying Wireless Setup and Router Setup? I have previously used ethernets in similar situations and never had to input information like this?

I have tried to turn of the wi-fi but that doesn't work either. I think it could be a something to do with the internet provider because virginmedia comes up on the webpage. This is what comes up:
Wireless Setup
WGR614V9
V1.0.11_1.0.1VGUK
Wireless Setup
Name (SSID):
Security Passphrase (WPA-PSK):
(8-63 characters)
Channel:
01 06 11
Router Setup
Router Password:
(8-63 characters)
any ideas?!?

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

My iphone is no longer working I have black screen with a picture of the itunes logo and a USB cable. When I try to connect my iphone to itunes the device is not detected, can anyone help me? I desperatley need my phone back

I have had a 3GS for 2+ years. After upgrading to IOS 4 (now 4.3.5) I began having problems. In the past week, my screen went to the itunes logo and USB cable twice -- unprovoked -- just found it sitting there like that! I connected to itunes and it did restore from a backup but it is a major inconvenience. I am also searching for answers, but better back-up regularly!

My PC is connected to my airport by Ethernet. I can connect to the network, but not the internet. My wireless devices can access the internet

My PC is connected to AirPort Extreme by ethernet, I can access the network, but not the internet. The wireless devices on the extreme can access the internet

Hey DM,
Is the Wireless(WL) router signal coming through the wired-router?
My ISP requires that my Wireless Router is identified from their end. I use AirPort Express, so they need its MAC address from the router. Without that, my network will show up, but my ISP doesn't recognize it and won't allow it to route he internet. I don't know your exact situation though.
Can other wireless computers access the internet? If they can through the WL router, then it might be the MacBook. If they can't, then you might want to contact your ISP and ask if they can see your wireless router?
Let us know.
Adam

LaserJet Pro M1536dnf MFP ToolboxFX, cannot connect to the device

Hi , I see you have put a great deal of effort into getting the ToolboxFX to work again, I'd be happy to help you with this. I found a post written by a colleague that I think might help. Please take a look at what suggested to another user: Toolbox FX error. Please let me know if this helps, or if you require further assistance. Thanks.

Hello, I am new to HP Forums.
I have tried to search these forums for a working solution for my issue, without success.
I apologize if I have provided too much information all at once. I see many people seem to have problems with the HP ToolboxFX software. Thanks to anyone that can help me solve my current issue. Product: HP LaserJet Pro M1536dnf MFP
Model: CE538A
Firmware Date: 20140630 (was 20100615) Computer: Dell OptiPlex 980 Mini-Tower
OS: Microsoft Windows 7 Ultimate 64-bit SP1
RAM: 8GB Background: ****
We have a small quantity (4 via USB, 2 via wired Ethernet) of this model AIO printer in use here since 2010. I have never had any problems printing to or scanning from these printers. The HP ToolboxFX software DID function on my PC without issue until it was recently uninstalled.
I have never tested the Faxing function of the printer connected to my PC, so I don’t know if that part of it works. The fax function does work on another (same model) printer installed on our network. Originally this printer was connected to my PC via the supplied USB cable and installed using the supplied HP software media (Installer v1.5.6.4020 I believe).
My PC had a couple USB ports that did not work, and during the troubleshooting process, a second copy of this printer became installed and linked to a different USB port. I wanted to see if I could have HP ToolboxFX deliver faxes received on one of our networked HP LaserJet Pro M1536dnf MFP printers to my PC instead of another PC currently receiving these faxes. So I thought I would uninstall the printer and software on my PC and reinstall it using the updated software (Installer v3.0.3.5253) downloaded from the HP website. That is when my problems started. Problem: ****
HP ToolboxFX seems to be running in the system tray, but when I right click the system tray icon and select “Open HP ToolboxFX”, I receive a popup error window. By the way, the printers name no longer appears in the right click context menu. **** Window content:
Cannot connect to the device. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information. [ OK ] <---<< Button Clicking the [OK] once displays the same popup window again. Clicking the [OK] button a second time opens HP ToolboxFX but shows my printer status as not connected displaying a red square with white “X” inside it. I can still print to and scan from this printer. It is only the HP ToolboxFX software that is not working. What I have tried to resolve problem: **** o- I have tried uninstalling and then reinstalling the printer and software (Installer v3.0.3.5253), using USB. Same “Cannot connect to the device” window.
o- Thinking the newer software might need newer firmware installed on the printer, I ran the “Firmware Update Utility” found on the HP website. Firmware version 20140630 successfully installed.
o- I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using USB. Same “Cannot connect to the device” window.
o- Thinking the perhaps the newer software was the problem, I uninstalled (Installer v3.0.3.5253) and then reinstalled (Installer v1.5.6.4020, original working) the printer and software using USB. Same “Cannot connect to the device” window.
o- Then I uninstalled (Installer v1.5.6.4020) and then reinstalled (Installer v3.0.3.5253) the printer and software using USB. Same “Cannot connect to the device” window.
o- Wondering if this was a USB software issue, I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using wired Ethernet. Still no problems printing or scanning. Could now access the printer using its IP address, but the HP ToolboxFX error changed. Now the popup window contained a different error. **** Window content: HP ToolboxFX has encountered an error and can not recover. Please re-start HP ToolboxFX, or re-start your PC. You will not be able to receive alert messages, or use other HP ToolboxFX features until HP ToolboxFX has been restarted. Windows version: Win32NT - 6.1.7601.65536
HP ToolboxFX version: 006.015.01163 [ OK ] <---<< Button I believe clicking the [OK] button NEVER clears the popup window (or just makes it reappear). The normal HP ToolboxFX program window never appears.
o- As this was not helpful, I uninstalled and then reinstalled the printer and software (Installer v3.0.3.5253), using USB again. Still no problems printing or scanning, but the HP ToolboxFX error remained the same. The popup window still contained the following error. **** Window content:
HP ToolboxFX has encountered an error and can not recover. Please re-start HP ToolboxFX, or re-start your PC. You will not be able to receive alert messages, or use other HP ToolboxFX features until HP ToolboxFX has been restarted. Windows version: Win32NT - 6.1.7601.65536
HP ToolboxFX version: 006.015.01163 [ OK ] <---<< Button I believe clicking the [OK] button NEVER clears the popup window (or just makes it reappear). The normal HP ToolboxFX program window never appears.
o- I then tried a forum posted claimed solution (follows). This did not resolve my ToolboxFX problem but did reset the error window content and software functioning back to its original non-working state. Now I am back at square one. Printer still works but cannot use ToolboxFX at all. Posted claimed solution START: ****
From pcwizard on 08-03-2012 08:52 AM
Re: LaserJet M1536 ToolboxFX error Hi Maddie54, Try the following and see if it works for you;
o- Please go to the following directory C:\ProgramData\Hewlett-Packard\ToolboxFX\Settings
o- Under this directory delete all the files in Settings folder.
o- Then reboot pc and restart the printer. *This can occur when the IP has changed or the printer had lost communication and been re-connected. I am an HP employee.Posted claimed solution END: **** **** Window content:
Cannot connect to the device. Make certain that the device's power cord is plugged in, the power is turned on, and that all cables are properly connected. Check the Troubleshooting tab or product documentation for more information. [ OK ] <---<< Button Clicking the [OK] once displays the same popup window again. Clicking the [OK] button a second time opens HP ToolboxFX but shows my printer status as not connected displaying a red square with white “X” inside it.
*-*-*-*-*- I noticed that the HP uninstall process leaves a large quantity of abandoned folders and files scattered on the file system. I can only imagine that it has done something similar to the registry files. I can only imagine that since I know ToolboxFX works on other PC’s and DID work on mine, at one time, there must be a way to get it to work again. Perhaps there is a better uninstall utility (or manual procedure) that can remove whatever is causing the ToolboxFX software to not work. I hope someone has some useful insight into this problem. Would be nice to use the HP ToolboxFX software to receive faxes from one of our networked printers.
Thank you very much for your assistance.
Paul

Yesterday I reset my settings on my iphone 4 to correct another problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?

Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device.

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows 8?

I have just upgraded to Windows 8 and my scyning and upgrading my phone with new apple software fails, Itunes looses connection with the device (phone), cant backup the phone or download new software, is this an issues with Windows

Hi, stig2013.
I would recommend the steps in the article below. See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you are receiving an error message, find the exact error number that you recieved in the article below and process the steps.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
Cheers,
Jason H.

The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumar

try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif

"iTunes couldn't connect to this iPad. Can't establish a secure connection to the device."

Hello anyone this might concern,
I'm having a problem with my week-old iPad 3 WiFi + 4G (although not 4G in Sweden, but anyway). When I yesterday (19th of June 2012) tried to hook my iPad to my mid 2011 iMac 27" wanting to synchronize it, I got a warning message that I've never seen before and not being known on the interwebs when searching for it.
Translated from Swedish it says: "iTunes couldn't connect to this iPad. Can't establish a secure connection with the device". No error code or anything. Just a window saying this and an OK button. Wierd I thought, tried to search for it and got hits that were similar but not in my opinion the same problem at all. Some people had problems a couple of years ago giving the similar error message, that had to do with the date and time not being the same on the iDevice as the computer hooking it up to. I checked my settings but everything checks out all right.
After a couple of tries of restarting both the iPad and the iMac, reinstalling iTunes etc etc I tried to connect my iPhone 4S. That went just fine, without a hitch. I was able to synchronize it, do whatever. So I took out my MBA 13" late 2010, connected the iPad to it and started iTunes - voilá it worked just fine! But still, the issue remains on the iMac today. I can't for the love of Steve understand what the problem is.
So, anyone out there sitting on an awesome fix?
Thanks,
Jacob

OK!
So I myself had this issue and have solved the issue. Let me recap:
1: Purchased a 13" Mac Book Pro
2:Already owned an Ipad that was syned with the PC I was previously using
3: When I connected my Ipad to the brand new Mac and opened Itunes was told (paraphrase) "Itunes can not connect to your Ipad...can not find secure connection
4: Called a multitude of Apple customer service folks who were really nice but couldn't help
          1) I tried different ports
          2) various apple connectors were used (not technical word but you know the cord that you use to connect your iPad to your cable with the usb)
          3) and on and on.....and no the date and time thing mentioned on many forums didn't work
          4) was able to sync photos through iPhoto with no issues
So what solved it:
1) Back up your iPad to iCloud (make sure it fully completes)
2) Go to General~Reset~Erase All Content and Settings
3) When iPad restores it will eventually get to a promp "restore from iCloud" say yes
4) At this point you are home sweet home...connect to itunes and Walla!
I also discovered how to sync Google calendars (if you have multiple like me) and google contacts to address. Holler at me if you need those too...don't waste your entire day like me. Peace Out!!

Keep getting error message "Failed to connect to the device" when......

Hi,
I keep getting the following message:
(this is an icon in this area of a camera sitting on pictures)
Failed to connect to the device.
-Check the I/F cable connection between the device and your computer
-Please turn off the device once, and then turn ON the device again.
Then try again.
[MTW005] OK (this is highlighted like you can click on it, but nothing happens when you click on it)
I don't have this device even plugged in because I haven't a need for it. Yet the message keep showing up. I thought I would out smart the error message and plugged in the device (ScanDisk 4 in 1 (media card) reader. But I was the one out smarted. Nothing changed. I still have the error message, even after restarting the computer or shutting down and turning back on. All I can do with the message is slide it the edges of my screen display so it isn't in the way. Help, how do I get rid of this problem. This has happened before and then one day the error message disappears for awhile to only come back yesterday to drive me nuts (short drive by the way).

Hello,
Try going to Macintosh HD > Applications > Image Capture > Image Capture menu > Preferences... > General tab > "When a camera is connected, open: " set it to 'iPhoto' or 'No Application'.
regards
mrtotes

Visual Studio 2005 The remote connection to the device has been lost. Please verify the device connection and restart debugging.

Basically I've been using Visual Studio 2005 for a few weeks now moving a Pocket PC project from 2003 to 2005. When I hit the Start Debugging Button every time until today the project would rebuild and deploy to my pocket PC allowing me to debug etc but now I get
The remote connection to the device has been lost.
Please verify the device conection and restart debugging.
I used to get this problem in VS2003 sometimes and just like the numerous posts on different sites that I've looked at the problem eventually goes away and I'm none the wiser. One guy said that he found that if he went to bed the problem was resolved when he came back!
My PDA running Windows 2003 2nd Edition is directly connected to my PC via a USB port. I've rebooted my PC and done a soft reset on the PDA but it didn't help. I'm using ActiveSync 4.1.
Does anyone know how to resolve this problem?

I still can't debug. I have just tried a hard reset and I get the same problem
The build output is as follows
------ Build started: Project: BO, Configuration: Debug Any CPU ------
BO -> C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\BO.dll
------ Build started: Project: Printing, Configuration: Debug Any CPU ------
No way to resolve conflict between "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral, PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" and "System.Data.SqlServerCe, Version=1.0.5000.0, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes". Choosing "System.Data.SqlServerCe, Version=3.0.3600.0, Culture=neutral, PublicKeyToken=3be235df1c8d2ad3, Retargetable=Yes" arbitrarily.
Printing -> C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\Printing\bin\Debug\Printing.dll
------ Build started: Project: MobileSeller, Configuration: Debug Any CPU ------
Consider app.config remapping of assembly "System.Data, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\WindowsCE\System.Data.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System.Windows.Forms, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\WindowsCE\System.Windows.Forms.dll] to solve conflict and get rid of warning.
Consider app.config remapping of assembly "System, Culture=neutral, PublicKeyToken=969db8053d3322ac, Retargetable=Yes" from Version "1.0.5000.0" [] to Version "2.0.0.0" [C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\WindowsCE\System.dll] to solve conflict and get rid of warning.
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Microsoft.Common.targets : warning MSB3247: Found conflicts between different versions of the same dependent assembly.
MobileSeller -> C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\bin\Debug\MobileSeller.exe
Done building project "MobileSeller.vbproj".
------ Skipped Deploy: Project: BO, Configuration: Debug Any CPU ------
Project not selected to build for this solution configuration
------ Skipped Deploy: Project: Printing, Configuration: Debug Any CPU ------
Project not selected to build for this solution configuration
------ Deploy started: Project: MobileSeller, Configuration: Debug Any CPU ------
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\windowsce\wce400\armv4\NETCFV2.ppc.armv4.cab'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\System.Data.Common.dll'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v2.0\wce400\ARMV4\sqlce20.ppc.wce4.armv4.CAB'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v2.0\wce400\ARMV4\sqlce20.dev.ppc.wce4.armv4.cab'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\InTheHand.Data.Adoce.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\InTheHand.Interop.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\Printing\bin\Debug\PocketHTMLprint_NetCF.dll'
Deploying 'C:\Dev\MILLAR CODE CABINET\VS2003CF\References\USICF.dll'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\wce400\ARMV4\sqlce30.ppc.wce4.armv4.CAB'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\wce400\ARMV4\sqlce30.repl.ppc.wce4.armv4.CAB'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\SQL Server\Mobile\v3.0\wce400\ARMV4\sqlce30.dev.enu.ppc.wce4.armv4.CAB'
Deploying 'C:\Dev\VS2005CF\References\release\Signature.dll'
Deploying 'C:\Dev\VS2005CF\References\release\RealUpDown.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\Printing\bin\Debug\Printing.dll'
Deploying 'C:\Dev\VS2005CF\References\release\PhoneAPI.dll'
Deploying 'C:\Dev\VS2005CF\References\release\MVnetApplication.dll'
Deploying 'C:\Dev\VS2005CF\References\release\MobileHList.dll'
Deploying 'C:\Dev\VS2005CF\References\release\MobileGrid.dll'
Deploying 'C:\Dev\VS2005CF\References\release\ImageButtons.dll'
Deploying 'C:\Dev\VS2005CF\References\release\CreditCardValidator.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\BO\bin\Debug\BO.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\View.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Unscheduled.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Unschedule.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\tr.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\top.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Tools.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\tl.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButUnPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButSquUnPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButSquPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\SmlButPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Select1.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\sekonda3.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\sekonda2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\sekonda1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\ScrewDriver.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Scheduled.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Scheduled.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Schedule.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Scan.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Save.ICO'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Remove.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\ReceiptTemplate.htm'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Problem.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\PrintDC.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Print.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Prev.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\bin\Debug\PocketHTMLprint_NetCF.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\pocketHTMLprint.dll'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Phone.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Page.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\NotesExist.ICO'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Notes.ICO'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Next.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\NewCust.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\MVNetLogoSmall.png'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\mtiny.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\MoneyScrew.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Money.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Magnify.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Lock.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Line.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\InvoiceTemplate.htm'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus4.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus3.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\gradus1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\FindVisit.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\FindCustomer.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Find.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DropDown.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\dentsplus3.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\dentsplus2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\dentsplus1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DentDevilsCar.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DentDevils2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\DentDevils1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Default2.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Default1.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Cust.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Completed.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Cancelled.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\Call.ico'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\br.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\bottom.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\bl.gif'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\BigButUnPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\Resources\BigButPressed.jpg'
Deploying 'C:\Dev\millar\MobileSeller\code\2005\MobileSeller\MobileSeller\MobileSeller\bin\Debug\MobileSeller.exe'
Deploying 'C:\Program Files\Microsoft Visual Studio 8\SmartDevices\SDK\CompactFramework\2.0\v2.0\windowsce\diagnostics\System_SR_enu.cab'
========== Build: 3 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 1 succeeded, 0 failed, 2 skipped ==========
Visual studio indicates that
Deployment Started
Depolyment Succeeded
Loading Symbols
Ready
and then I get the same problem ie The Remote connection to the device has been lost

What does it mean when I have my iphone plugged in trying to sync it and just when it gets to step 7, something pops up that says "attempting to copy the disk 'TI10653500D' failed. The device is not connected"

what does it mean when I have my iphone plugged in trying to sync it and just when it gets to step 7, something pops up that says "attempting to copy the disk 'TI10653500D' failed. The device is not connected"

Have you tried a different cable?

TS3972 My Apple TV connects to the wifi but not to the internet.

My Apple TV connects to the wifi but not to the internet. Currently using a D-Link Router and Shaw Cable in BC Canada.
Apple says "Connections through proxy servers are not supported". Would that be Shaw? How can I update the ATV
software without connecting to a TV and the internet? Can I connect it to my MacBook Pro? ATV worked very well in Arizona
using CenturyLink as an ISP provider and their modem/router. ATV software is 5.0.

What happens when you try to connect? I would contact your ISP

Zen Micro Connection "the device is not connect

When I connect my Zen Micro in my computer the Zen Micro Media Explorer says that "the device is not connected. Please connect your Zen Micro to the computer" My battery is full. I read the instruction book and It said when you connect the Zen Micro in, Creative MediaSource or Windows Media Player starts up automatically... but nothing happens when I connect my Zen Micro. Please help.

<FONT face="Comic Sans MS" color=#ff0000 size=2>Hey, i have this same problem...well i did...im not sure :smileyindifferent:
<FONT face="Comic Sans MS" color=#ff0000 size=2>At first i followed the instructions on how to install the mp3 (micro) etc etc, i followed it to perfection. When it came to using the software on the disc, i found alot of problems, mainly that my Micro "apparently" was not connected, according to my Creative Media Source/Organiser etc.
<FONT face="Comic Sans MS" color=#ff0000 size=2>Anyway, after i downloaded loads of different updates etc, and basically fiddled about, i got WMP to recognise it!! BREAK THROUGH!!
<FONT face="Comic Sans MS" color=#ff0000 size=2>Alot of other ppl i know have had this same trouble as i and as loads of you are, so i would recommend using WMP, works fine, only downfall is I DON'T KNOW HOW TO MAKE PLAYLISTS :angry:
<FONT face="Comic Sans MS" color=#ff0000 size=2>As fussy as i am, this isn't good enough for me, i want the software to recognise it so i can take full advantage of my new Micro.
<FONT face="Comic Sans MS" color=#ff0000 size=2>So, i need advice, shall i quit while im ahead, or will someone gve me some help to resolve this problem?
<FONT face="Comic Sans MS" color=#ff0000 size=2>And if the later, what the hell shall i do?
<FONT face="Comic Sans MS" color=#ff0000 size=2>
<FONT face="Comic Sans MS" color=#ff0000 size=2>~Shaun~

Net connection trouble: "No Ethernet cable connected or the device is not responding"

Similar Messages

Maybe you are looking for