Net info manager, Help Needed

Good Morning all
I have a Mac that is on my network and I am trying to get it to connect to a web server, so I can do some browser testing. It will connect OK if I use the IP in the browser. But not when I try and use Net info manager
This works fine on My other Mac and I have copied the settings like for like in net info manager.
I have also made sure that there is no proxy info.
Am I missing a setting??
All help greatly appreciated

On your MacBook......
Open System Preferences (gear icon on the dock)
Open Network
Click on AirPort on the left
Click Advanced at the lower right
Make sure that the CCC 5 GHz network name is at the top of the connection order list. If it's not, drag it to that position.
Also make sure that there is a check mark in the box next to "Remember networks this computer has joined". No other boxes should be checked.
Click OK, then click Apply and close the windows
Your should understand that the 5 GHz network is not necessarily the strongest or best quality signal since 5 GHz frequencies are absorbed by any obstrucitons much more quickly than 2.4 GHz signals.
Another way of saying the same thing is that need line of sight...or close to it.....between the computer and router for really good performance with 5 GHz.

Similar Messages

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

Solaris Volume Manager help needed...

I am new to Solaris Volume Manager and need some assistance. I suspect that the mirroring was no setup correctly on a server I am concerned with. Here is some output:
metadb -i
flags first blk block count
a m p luo 16 8192 /dev/dsk/c1t0d0s7
a p luo 8208 8192 /dev/dsk/c1t0d0s7
================================================
metastat
d4: Mirror
Submirror 0: d50
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 5905116 blocks (2.8 GB)
d50: Submirror of d4
State: Okay
Size: 5905116 blocks (2.8 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s5 0 No Okay Yes
d3: Mirror
Submirror 0: d40
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 6292242 blocks (3.0 GB)
d40: Submirror of d3
State: Okay
Size: 6292242 blocks (3.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s4 0 No Okay Yes
d2: Mirror
Submirror 0: d30
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 8389656 blocks (4.0 GB)
d30: Submirror of d2
State: Okay
Size: 8389656 blocks (4.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s3 0 No Okay Yes
d1: Mirror
Submirror 0: d20
State: Okay
Pass: 0
Read option: roundrobin (default)
Write option: parallel (default)
Size: 33555735 blocks (16 GB)
d20: Submirror of d1
State: Okay
Size: 33555735 blocks (16 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s1 0 No Okay Yes
d0: Mirror
Submirror 0: d10
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 16779312 blocks (8.0 GB)
d10: Submirror of d0
State: Okay
Size: 16779312 blocks (8.0 GB)
Stripe 0:
Device Start Block Dbase State Reloc Hot Spare
c1t0d0s0 0 No Okay Yes
Device Relocation Information:
Device Reloc Device ID
c1t0d0 Yes id1,ssd@n20000004cf6f7b96
=============================================
metastat -p
d4 -m d50 1
d50 1 1 c1t0d0s5
d3 -m d40 1
d40 1 1 c1t0d0s4
d2 -m d30 1
d30 1 1 c1t0d0s3
d1 -m d20 0
d20 1 1 c1t0d0s1
d0 -m d10 1
d10 1 1 c1t0d0s0
========================================
format of c1t0d0 (rootdisk)
Part Tag Flag Cylinders Size Blocks
0 root wm 11615 - 17422 8.00GB (5808/0/0) 16779312
1 swap wu 0 - 11614 16.00GB (11615/0/0) 33555735
2 backup wm 0 - 24619 33.92GB (24620/0/0) 71127180
3 home wm 17423 - 20326 4.00GB (2904/0/0) 8389656
4 unassigned wm 20327 - 22504 3.00GB (2178/0/0) 6292242
5 var wm 22505 - 24548 2.82GB (2044/0/0) 5905116
6 unassigned wm 0 0 (0/0/0) 0
7 unassigned wm 24549 - 24619 100.16MB (71/0/0) 205119
=======================================================
format of c1t1d0 (rootmirror)
Current partition table (original):
Total disk cylinders available: 24620 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 1 - 14519 20.00GB (14519/0/0) 41945391
1 swap wu 14520 - 17423 4.00GB (2904/0/0) 8389656
2 backup wu 0 - 24619 33.92GB (24620/0/0) 71127180
3 - wu 0 - 0 1.41MB (1/0/0) 2889
4 - wu 1 - 24619 33.91GB (24619/0/0) 71124291
5 unassigned wm 0 0 (0/0/0) 0
6 var wm 17424 - 23231 8.00GB (5808/0/0) 16779312
7 unassigned wm 0 0 (0/0/0) 0
Any help and/or links to information for proper setup of mirroring when using Solaris Volume Manager would be appreciated. I should mention that the system also uses Veritas Volume Manager 4.1, but only Solaris Volume Manager is in control of the mirroring.

Duplicate slicing: prtvtoc /dev/rdsk/c1t0d0s7|fmthard -s - /dev/rdsk/c1t1d0s7
Lather, rinse, repeat for each file system:
metainit the bootable side of the mirror: metainit -f d71 1 1 c1t0d0s7.
metainit the other side: metainit d72 1 1 c1t1d0s7.
Attach one side of the mirror: metainit d70 -m d71
When done: lockfs -fa;init 6
Lather, rinse, repeat for each file system:
After reboot attach the other side of the mirror: metattach d70 d72
bash-3.00# metastat -p
d70 -m d71 d72 1
d71 1 1 c1t0d0s7
d72 1 1 c1t1d0s7
d50 -m d51 d52 1
d51 1 1 c1t0d0s5
d52 1 1 c1t1d0s5
d10 -m d11 d12 1
d11 1 1 c1t0d0s1
d12 1 1 c1t1d0s1
d0 -m d1 d2 1
d1 1 1 c1t0d0s0
d2 1 1 c1t1d0s0
d60 -m d61 d62 1
d61 1 1 c1t0d0s6
d62 1 1 c1t1d0s6
bash-3.00# cat /etc/vfstab
#device         device          mount           FS      fsck    mount   mount
#to mount       to fsck         point           type    pass    at boot options
fd      -       /dev/fd fd      -       no      -
/proc   -       /proc   proc    -       no      -
/dev/md/dsk/d10 -       -       swap    -       no      -
/dev/md/dsk/d0 /dev/md/rdsk/d0 /       ufs     1       no      -
/dev/md/dsk/d70 /dev/md/rdsk/d70        /usr    ufs     1       no      -
/dev/md/dsk/d50 /dev/md/rdsk/d50        /var    ufs     1       no      -
/dev/md/dsk/d60 /dev/md/rdsk/d60        /opt    ufs     2       yes     -
/devices        -       /devices        devfs   -       no      -
ctfs    -       /system/contract        ctfs    -       no      -
objfs   -       /system/object objfs   -       no      -
swap    -       /tmp    tmpfs   -       yes     -

T400 - Accidentaly formatted the disk 1 (IMD-0) partition in disk management - Help Needed

Hello,
Initially when I re-formatted my computer to get rid of the factory image, I found that there was a hidden partition of 1.37GB which I could not touch, meaning i could not delete. I ignored it at that time and formatted my computer and reinstalled vista business on it using the license i got from lenovo. Now after some days, I was kind of getting concerned as to what exactly was the 1.37Gb partition on my computer. I guess I was getting worried as to why I was not able to reclaim that space for normal use. Today, I tried to reclaim it, by deleting the volume, thinking it should merge into the unallocated space, that I have on my primary hard drive. But it did not. However, what happened was that this space of 1.37GB did start showing up on My Computer, once I formatted it using NTFS. I then checked its properties in My Computer and it had an option of readyboost. I selected the option which says use this disk for readyboost, and immediately in no time, the disk was full with on 68MB remaining as free space. It also has an icon of readyboost in the drive, when I double-click it. This is when I figured that this space could be on a separate physical disk. I did some research and found out that this drive or device or chip, is listed as Disk-1 in disk management and as IMD-0 under Disk Drives in Device Manager. I googled about it, and found that it was related to the turbo memory. Now, I believe that turbo memory would be a separate flash chip, which would be hardwired to function in a particular way (enabling boosting speeds), and that it would be non-accessible to users from within windows for formatting or doing anything else. Hence, I also believe that the space which I reclaimed, is existing on my primary 320GB hard drive and is used in addition to the turbo memory, as a cache, to boost speeds. However, since I do not understand the turbo memory concept very well, I would really appreciate if someone could explain how the turbo memory works, i.e. including IMD-0 and all that. And the main help I need is on how to hide the 1.37GB partition again, and put it in a format that it was earlier in, and usable for turbo memory. At present I do not know if it is being used by turbo memory or not, but below is the current status of the turbo memory:
1. In Device manager, under disk drives, IMD-0 shows up, and in properties it just says device type -- disk drive. Now I read somewhere that it should say NVCACHE, but it does not say that on my pc, under any tabs of the properties of IMD-0. Can someone help me putting it back there.
2. Under Disk Management, it says Local Disk H:, 1.37GB NTFS, Healthy (Active, Primary Partition). I don't exactly remember, but I guess prior to me formatting it, it said unallocated. Help needed here too.
3. In the Turbo memory controller, it says Windows readyboot enabled, Windows Readydrive enabled, 2GB
and below that I have checkboxes for enabling windows readyboost and readydrive checked.
So guys, can please anyone help me in re-hiding the 1.37GB partition and making it in the state it was before.
Thanks a lot for your help.

Hi Eric,
Please refer the following HP article to expand your array , refer the TechNet article to expand your drive:
HP Proliant Servers - How to Expand an Array and Extend the Logical Drive
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_efb5c0793523e51970c8fa22b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03510253-1%257CdocLocale%253Den_US&javax.portlet.tpst=efb5c0793523e51970c8fa22b053ce01&sp4ts.oid=4231377&ac.admitted=1411638027623.876444892.199480143
TechNet article:
Extend System/Boot Volume on Windows Server 2008/ Windows Vista/Win7 Beta
http://blogs.technet.com/b/mghazai/archive/2009/02/24/extend-system-boot-volume-on-windows-server-2008-windows-vista-win7-beta.aspx
Extend a simple or spanned volume
http://technet.microsoft.com/en-us/library/cc776741.aspx
I’m glad to be of help to you!
*** This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control
these sites and has not tested any software or information found on these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. There are inherent dangers in the
use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet. ***
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Colour management help needed?!

Hi everyone,
I'll soon be getting some of my images made into a photography book by a large and reputable printing company. They have just sent me their ICC profiles for me to use when I edit the photos for the book.
What exactly do I need to do in order to make what I see on the screen identical (or very close to) what my printed books will look like? I will be provided with proofs before the books are printed but would like to get colour management right the first time around.
I edit my images using Photoshop CS5, mainly in camera raw.
If anyone could provide me with the steps required it would be greatly appreciated!
Many thanks,
Poppy
P.S. I recently got given a spyder calibration device but have never used it, don't know if this needs to be involved in the colour management process somehow?

function(){return A.apply(null,[this].concat($A(arguments)))}
PoppyAG wrote:
If anyone could provide me with the steps required it would be greatly appreciated!
How did they describe the profiles given to you? What are their names?
This is not really a subject someone can just lay out for you in a forum post. It's complicated to get things set up right, and the choices you need to make during setup require both understanding of the concepts AND of your needs. There are few cases where without knowing your needs someone could just say "the right way to set it is this". You need to go seek out all the information you can find about color management and read it, then come to a place like this with specific questions. There are quite a few overviews online, but understand this while you're reading: Not everyone who writes on the web really understands it either, so you'll have to keep in mind that some of the info you find is going to be just plain wrong, even though it sounds right.
function(){return A.apply(null,[this].concat($A(arguments)))}
PoppyAG wrote:
What exactly do I need to do in order to make what I see on the screen identical (or very close to) what my printed books will look like? I will be provided with proofs before the books are printed
Inevitably the schedule will get crunched, and they'll suggest that the physical proof review can be skipped.
ABSOLUTELY, POSITIVELY DON'T LET THEM GET AWAY WITH SKIPPING THE PROOF REVIEW.
In a recent book of astrophotography I did the printing came out too dark, because for all my color management knowledge and proper setup, someone without the proper knowledge at the printing contractor didn't handle the files properly, and because of the editor's stupidity they both caused the schedule to slip and requested that we make up time by skipping the paper review - and like an idiot I let them. As a result the images are just interesting rather than spectacular, and book sales suffered.
-Noel

Library (folders) management help need

Hi All, I have question about the iMac operating system. I have the last updated. The problem when I manage the place of the folder windows they are all mixing up. I mean they not on the place where I left them. how to set they stay on the same place? I know there are different possibilities to set.
I tried but it not helped for me. What I can do? How and where can set this they stay on their place?
Thanks. (This question for an iMac and not what sign for me. Thanks)
laci

laci wrote:
RC-R, always changes the position of the windows inside the directory.
I am not sure of what you mean by this. Windows are the frames that contain other things like directories. (A directory is another name for a folder.) So you should see directories inside windows, not the other way around.
If you mean that the positions of the icons for directories or files in Finder windows keep changing, that may be because there are different view options you can set for Finder windows that change their positions.
If I'm guessing right about this, open a Finder window & choose "Show View Options" from the "View" menu at the top of the screen. Look for an item in the options window that says "Arrange by" with several choices. If that is set to anything other than "None" (the first choice on the list) this may be why the positions won't stay where you left them.

Network management help needed

Ok, I just installed Arch, and I'm really liking it, except for the fact that I can't get NM(NetworkManager) to work. I need NM to connect to my Wi-Fi network. I connects to the wired one when I plug it in. When I run nm-applet, it says "Network Manager is not running"

You should disable the "network" daemon altogether if you plan on using network manager. In the daemons array just put a "!" in front of network

Net/router guru help needed (5Ghz network)

I purchased Netgear WNDR4500 router and wanted to set it up the way that my MacBook Air (2010/Snow Leopard with latest updates) connects to it via 5Ghz network only.
The problem is that when I start up my Air one of the three times a message pops up on my MacBook saying "None of your prefered networks are available"
but below the message it offers to connect to the other found networks and my 5Ghz connection is listed there. If I press it connection starts immediately. Sometimes it connects without a problem.
If I add 2.4Ghz to known networks and MacBook can't connect to the 5Ghz (It's first prefered network in list) it connects to 2.4Ghz. There are no such problems with the other band.
However I'd like have automatic connection to 5Ghz allways not manual.
I tried different settings in router (security modes, no security, speed settings, network card access list, channels etc) but no luck...SSID's are CCC and CCC 5Ghz respectiveley.
Maybe there are some advanced settings in router to solve this or terminal commands in MacBook.

On your MacBook......
Open System Preferences (gear icon on the dock)
Open Network
Click on AirPort on the left
Click Advanced at the lower right
Make sure that the CCC 5 GHz network name is at the top of the connection order list. If it's not, drag it to that position.
Also make sure that there is a check mark in the box next to "Remember networks this computer has joined". No other boxes should be checked.
Click OK, then click Apply and close the windows
Your should understand that the 5 GHz network is not necessarily the strongest or best quality signal since 5 GHz frequencies are absorbed by any obstrucitons much more quickly than 2.4 GHz signals.
Another way of saying the same thing is that need line of sight...or close to it.....between the computer and router for really good performance with 5 GHz.

Help needed : Extension manager cs6 not listing products

Help needed to Adobe extension manager cs6 to show all my cs6 products
I downloaded Extension manager from here Adobe - Exchange : Download the Adobe Extension Manager
My Computer windows xp 32bit
My Photosop version cs6
My Dreamweaver version cs6
I installed photoshop here : C:\Program Files\Adobe\Adobe Dreamweaver CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="$sharedextensionfolder">$shareddatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration/Extensions</Data>
        <Data key="$dreamweaver">$installfolder</Data>
        <Data key="$dreamweaver/Configuration">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE/Configuration</Data>
        <Data key="$UserBinfolder">$userdatafolder/Adobe/Dreamweaver CS6/$LOCALE</Data>
        <Data key="NeedOperationNotification">true</Data>
        <Data key="QuitScript">dw.quitApplication()</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">DRWV</Data>
        <Data key="ProductVersion">12.0</Data>
        <Data key="Bit">32</Data>
<Data key="DefaultLocale">en_US</Data>
</VariableForExMan>
</Configuration>
Extension manager installed here : C:\Program Files\Adobe\Adobe Extension Manager CS6
Photoshop Installed here: C:\Program Files\Adobe\Adobe Photoshop CS6
and my XManConfigfile
<?xml version="1.0" encoding="UTF-8"?>
<Configuration>
    <VariableForExMan>
        <Data key="EmStorePath">$SharedRibsDataFolder/Adobe/Extension Manager</Data>
        <Data key="$photoshopappfolder">$installfolder</Data>
        <Data key="$pluginsfolder">$photoshopappfolder/Plug-Ins</Data>
        <Data key="$presetsfolder">$photoshopappfolder/Presets</Data>
        <Data key="$platform">Win</Data>
        <Data key="$actions">$presetsfolder/Actions</Data>
        <Data key="$blackandwhite">$presetsfolder/Black and White</Data>
        <Data key="$brushes">$presetsfolder/Brushes</Data>
        <Data key="$channelmixer">$presetsfolder/Channel Mixer</Data>
        <Data key="$colorbooks">$presetsfolder/Color Books</Data>
        <Data key="$colorrange">$presetsfolder/Color Range</Data>
        <Data key="$colorswatches">$presetsfolder/Color Swatches</Data>
        <Data key="$contours">$presetsfolder/Contours</Data>
        <Data key="$curves">$presetsfolder/Curves</Data>
        <Data key="$customshapes">$presetsfolder/Custom Shapes</Data>
        <Data key="$duotones">$presetsfolder/Duotones</Data>
        <Data key="$exposure">$presetsfolder/Exposure</Data>
        <Data key="$gradients">$presetsfolder/Gradients</Data>
        <Data key="$huesat">$presetsfolder/Hue Sat</Data>
        <Data key="$imagestatistics">$presetsfolder/Image Statistics</Data>
        <Data key="$keyboardshortcuts">$presetsfolder/Keyboard Shortcuts</Data>
        <Data key="$layouts">$presetsfolder/Layouts</Data>
        <Data key="$lenscorrection">$presetsfolder/Lens Correction</Data>
        <Data key="$levels">$presetsfolder/Levels</Data>
        <Data key="$liquifymeshes">$presetsfolder/Liquify Meshes</Data>
        <Data key="$menucustomization">$presetsfolder/Menu Customization</Data>
        <Data key="$optimizedcolors">$presetsfolder/Optimized Colors</Data>
        <Data key="$optimizedoutputSettings">$presetsfolder/Optimized Output Settings</Data>
        <Data key="$optimizedsettings">$presetsfolder/Optimized Settings</Data>
        <Data key="$patterns">$presetsfolder/Patterns</Data>
        <Data key="$reducenoise">$presetsfolder/Reduce Noise</Data>
        <Data key="$replacecolor">$presetsfolder/Replace Color</Data>
        <Data key="$scripts">$presetsfolder/Scripts</Data>
        <Data key="$selectivecolor">$presetsfolder/Selective Color</Data>
        <Data key="$shadowhighlight">$presetsfolder/Shadow Highlight</Data>
        <Data key="$smartsharpen">$presetsfolder/Smart Sharpen</Data>
        <Data key="$styles">$presetsfolder/Styles</Data>
        <Data key="$textures">$presetsfolder/Textures</Data>
        <Data key="$tools">$presetsfolder/Tools</Data>
        <Data key="$variations">$presetsfolder/Variations</Data>
        <Data key="$webphotogallery">$presetsfolder/Web Photo Gallery</Data>
        <Data key="$workspaces">$presetsfolder/Workspaces</Data>
        <Data key="$zoomify">$presetsfolder/Zoomify</Data>
     <Data key="$hueandsaturation">$presetsfolder/Hue and Saturation</Data>
     <Data key="$lights">$presetsfolder/Lights</Data>
     <Data key="$materials">$presetsfolder/Materials</Data>
     <Data key="$meshes">$presetsfolder/Meshes</Data>
     <Data key="$rendersettings">$presetsfolder/Render Settings</Data>
     <Data key="$volumes">$presetsfolder/Volumes</Data>
     <Data key="$widgets">$presetsfolder/Widgets</Data>
        <Data key="$localesfolder">$photoshopappfolder/Locales</Data>
        <Data key="$additionalplugins">$localesfolder/$LOCALE/Additional Plug-ins</Data>
        <Data key="$additionalpresets">$localesfolder/$LOCALE/Additional Presets</Data>
        <Data key="$localeskeyboardshortcuts">$localesfolder/$LOCALE/Additional Presets/$platform/Keyboard Shortcuts</Data>
        <Data key="$localesmenucustomization">$localesfolder/$LOCALE/Additional Presets/$platform/Menu Customization</Data>
        <Data key="$localesworkspaces">$localesfolder/$LOCALE/Additional Presets/$platform/Workspaces</Data>
        <Data key="$automate">$pluginsfolder/Automate</Data>
        <Data key="$digimarc">$pluginsfolder/Digimarc</Data>
        <Data key="$displacementmaps">$pluginsfolder/Displacement Maps</Data>
        <Data key="$effects">$pluginsfolder/Effects</Data>
        <Data key="$extensions">$pluginsfolder/Extensions</Data>
        <Data key="$fileformats">$pluginsfolder/File Formats</Data>
        <Data key="$filters">$pluginsfolder/Filters</Data>
        <Data key="$imagestacks">$pluginsfolder/Image Stacks</Data>
        <Data key="$importexport">$pluginsfolder/Import-Export</Data>
        <Data key="$measurements">$pluginsfolder/Measurements</Data>
        <Data key="$panels">$pluginsfolder/Panels</Data>
        <Data key="$parser">$pluginsfolder/Parser</Data>
     <Data key="$3dengines">$pluginsfolder/3D Engines</Data>
        <Data key="$lightingstyles">$pluginsfolder/Filters/Lighting Styles</Data>
        <Data key="$matlab">$photoshopappfolder/MATLAB</Data>
        <Data key="UserExtensionFolder">$photoshopappfolder</Data>
        <Data key="$photoshop">$UserDataFolder/Adobe/Adobe Photoshop CS6/Configuration</Data>
        <Data key="DisplayName">Photoshop CS6 32</Data>
        <Data key="ProductName">Photoshop32</Data>
        <Data key="FamilyName">Photoshop</Data>
        <Data key="ProductVersion">13.0</Data>
        <Data key="IconPath">Configuration/PS_exman_24px.png</Data>
        <Data key="SupportedInSuite">CS6</Data>
        <Data key="HostNameForCSXS">PHSP</Data>
        <Data key="Bit">32</Data>
    </VariableForExMan>
</Configuration>
                                                                    Please someone help me i cant install any photoshop extension because of this issue,,,

Waiting for your reply ...thanks
Here is the results
I installed photoshopcs6 illustrator cs6 dreamweaver cs6 illustrator cs6 in the system , But nothing seems
Result: BridgeTalk Diagnostics
Info:
Name = estoolkit-3.8
Status = PUMPING
Path
Version = 2.0
Build = ES 4.2.12
Next serial number = 40
Logging: = OFF
Now = 15:55:49
Messages:
Message Version = 2.05
Authentication = ON
Digest = ON
Thread: estoolkit-3.8#thread
Avg. pump interval = 55ms
Last pump = 62ms ago
Ping: 7
ECHO_REQUEST: ECHO_RESPONSE
Timeout = undefined
Handler = undefined
STATUS: PUMPING
Timeout = undefined
Handler = undefined
MAIN: MAIN
Timeout = undefined
Handler = installed
LAUNCHED: LAUNCHED
Timeout = undefined
Handler = installed
DIAGNOSTICS: DIAGNOSTICS
Timeout = undefined
Handler = installed
INFO: INFO
Timeout = undefined
Handler = installed
SETUPTIME: thread=0ms, left=16ms
Timeout = undefined
Handler = undefined
Instances: 3
estoolkit-3.8#dbg:
msg[15:55:49]: 00000035
@BT>Version = 2.05
Target = estoolkit-3.8#dbg
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 15:55:50
Type = Ignore
Response-Request = Timeout
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 35
Received = undefined
Result = undefined
Error = undefined
Body = (empty)
Incoming: 1
Outgoing: 0
Handler: 9
ExtendScript = for all messages
Error = for only msg #25
Error = for only msg #27
Error = for only msg #31
Result = for only msg #35
Error = for only msg #35
Timeout = for only msg #35
Result = for only msg #37
Error = for only msg #37
estoolkit-3.8#estk:
msg[15:55:49]: 00000037
@BT>Version = 2.05
Target = estoolkit-3.8#estk
Sender = estoolkit-3.8#dbg
Sender-ID = localhost:win3788
Timeout = 16:05:49
Type = Debug
Response-Request = Result Error
Headers = (no headers)
Timestamp = 15:55:49
Serial-Number = 37
Received = undefined
Result = undefined
Error = undefined
Body: 107 bytes
Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/>
Incoming: 1
Outgoing: 0
Handler: 1
ExtendScript = for all messages
estoolkit-3.8: (main)
Incoming: 0
Outgoing: 0
Handler: 1
ExtendScript = for all messages
Targets: 1
Connector = PCD
Installed: 0
Running: 0
exman-6.0:
Path = C:\Program Files\Adobe\Adobe Extension Manager CS6\Adobe Extension Manager CS6.exe
Display Name = Adobe Extension Manager CS6
MsgAuthentication = ON
MsgDigest = ON
ESTK = OFF
BundleID = com.adobe.exman
Status = (not running)
ExeName = Adobe Extension Manager CS6.exe
Installed: 1
Running: 0
Groups = (no groups defined)

TS1398 Support Info very helpful I will return to site if I need to

The info was helpful especialy about if your router is compadible with ios devices

Do you have a question?

Help needed by new Iphone 4s owner

Help needed please - both my hubby and I have iphone 4s - I've just gone to download music onto my phone and have somehow managed to download all his stuff onto my phone and lost all of mine Is there anyway I can get my info back and delete his without restoring to back to factory settings (this was the first time I connected mine to the laptop to download and I'm not very good with the computer as you can see from my problem !) xx

Thank you but I've not managed to download any I tunes yet but have got all his contacts and none of mine - thats what I'm trying to restore (sorry if not clear in question but as I said before I'm useless on computers)

Help needed to run JSTL 1.1 in Tomcat 6.0.16

Hi All,Help needed to run JSTL 1.1 in Tomcat 6.0.16. I am trying to run the example given in http://tomcat.apache.org/tomcat-6.0-doc/jndi-datasource-examples-howto.html The example tries to connect to MySQL database from JSP using JSTL and JNDI Datasource.I am running the example using Eclipse 3.4.2 using Sysdeo plugin to start and stop Tomcat server from Eclipse IDE.
My web.xml file has <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5">
</web-app>
and test.jsp has proper taglib directives
<%@ taglib prefix="sql" uri="http://java.sun.com/jsp/jstl/sql" %>
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core" %>
I have placed the jstl.jar and standard.jarof the jakarta-taglibs-standard-1.1.2.zip under E:\Deepa\workspace\DBTest\WebContent\WEB-INF\lib directory also placedcontext.xml file under E:\Deepa\workspace\DBTest\WebContent\META-INF and the content of context.xml is as below
<Context path="/DBTest" docBase="DBTest"
debug="5" reloadable="true" crossContext="true">
<Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource"
maxActive="100" maxIdle="30" maxWait="10000"
username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>
</Context>
Now while running the example, Eclipse creates one DBTest.xml file under C:\Program Files\Apache Software Foundation\Tomcat 6.0\conf\Catalina\localhost
which has the following line:
<Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest" workDir="E:\Deepa\workspace\DBTest\work" />
I am getting the following error when running http://localhost/DBTest/WebContent/test.jsp
in Browser:
<HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
org.apache.jasper.compiler.DefaultErrorHandler.jspError(DefaultErrorHandler.java:51)
org.apache.jasper.compiler.ErrorDispatcher.dispatch(ErrorDispatcher.java:409)
org.apache.jasper.compiler.ErrorDispatcher.jspError(ErrorDispatcher.java:116)
org.apache.jasper.compiler.TagLibraryInfoImpl.generateTLDLocation(TagLibraryInfoImpl.java:315)
org.apache.jasper.compiler.TagLibraryInfoImpl.<init>(TagLibraryInfoImpl.java:148)
org.apache.jasper.compiler.Parser.parseTaglibDirective(Parser.java:431)
org.apache.jasper.compiler.Parser.parseDirective(Parser.java:494)
org.apache.jasper.compiler.Parser.parseElements(Parser.java:1444)
org.apache.jasper.compiler.Parser.parse(Parser.java:138)
org.apache.jasper.compiler.ParserController.doParse(ParserController.java:216)
org.apache.jasper.compiler.ParserController.parse(ParserController.java:103)
org.apache.jasper.compiler.Compiler.generateJava(Compiler.java:154)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:315)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:295)
org.apache.jasper.compiler.Compiler.compile(Compiler.java:282)
org.apache.jasper.JspCompilationContext.compile(JspCompilationContext.java:586)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:317)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:342)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:267)
javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
In the Tomcat Server console, I am getting the following error:
INFO: Server startup in 7295 ms
May 20, 2009 6:36:48 AM org.apache.jasper.compiler.TldLocationsCache processWebDotXml
WARNING: Internal Error: File /WEB-INF/web.xml not found
May 20, 2009 6:36:48 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
org.apache.jasper.JasperException: The absolute uri: http://java.sun.com/jsp/jstl/sql cannot be resolved in either web.xml or the jar files deployed with this application
what is the problem with my code?
When running the same example, by creating a local server in Eclipse(creating new Server connection pointing to same Tomcat 6.0 installation) it runs fine without any error.

Hi evnafets,
Wow, very helpful information, great insight into working of Eclipse. Thanks a lot.
I have one more question. I have a context.xml file under {color:#0000ff}E:\Deepa\workspace\DBTest\WebContent\META-INF{color} folder and that has the Resource element to connect to MySQL database:
{code{color:#000000}}{color}<Context path="/DBTest" docBase="DBTest" debug="5" reloadable="true" crossContext="true">
<Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="deepa" password="mysql" driverClassName="com.mysql.jdbc.Driver"
{color:#0000ff}url="jdbc:mysql://localhost:3306/javatest?autoReconnect=true"/>{color}
{color:#0000ff}</Context>{color}As usual when running application in local Tomcat server of Eclipse, this data source works fine. But when I run the application on Tomcat, by starting Sysdeo plugin from Eclipse, the DBTest.xml file created in C:\Tomcat 6.0\conf\Catalina\localhost has the context entry as<Context path="/DBTest" reloadable="true" docBase="E:\Deepa\workspace\DBTest\WebContent" workDir="E:\Deepa\workspace\DBTest\work">
</Context>The<Resource> element I have specified in the context.xml of \WebContent\META-INF folder is not taken into account by Tomcat and it gives the following error:May 21, 2009 5:20:04 AM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet jsp threw exception
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "org.apache.tomcat.dbcp.dbcp.SQLNestedException_: Cannot create JDBC driver of class '' for connect URL 'null'"
_at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.getConnection(_QueryTagSupport.java:276_)
at org.apache.taglibs.standard.tag.common.sql.QueryTagSupport.doStartTag(_QueryTagSupport.java:159_)
at org.apache.jsp.test_jsp._jspx_meth_sql_005fquery_005f0(_test_jsp.java:113_)
at org.apache.jsp.test_jsp._jspService(_test_jsp.java:66_)
at org.apache.jasper.runtime.HttpJspBase.service(_HttpJspBase.java:70_)
at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
at org.apache.jasper.servlet.JspServletWrapper.service(_JspServletWrapper.java:374_)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(_JspServlet.java:342_)
at org.apache.jasper.servlet.JspServlet.service(_JspServlet.java:267_)
at javax.servlet.http.HttpServlet.service(_HttpServlet.java:717_)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(_ApplicationFilterChain.java:290_)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(_ApplicationFilterChain.java:206_)
at org.apache.catalina.core.StandardWrapperValve.invoke(_StandardWrapperValve.java:233_)
at org.apache.catalina.core.StandardContextValve.invoke(_StandardContextValve.java:191_)
at org.apache.catalina.core.StandardHostValve.invoke(_StandardHostValve.java:128_)
at org.apache.catalina.valves.ErrorReportValve.invoke(_ErrorReportValve.java:102_)
at org.apache.catalina.core.StandardEngineValve.invoke(_StandardEngineValve.java:109_)
at org.apache.catalina.connector.CoyoteAdapter.service(_CoyoteAdapter.java:286_)
at org.apache.coyote.http11.Http11Processor.process(_Http11Processor.java:845_)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(_Http11Protocol.java:583_)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(_JIoEndpoint.java:447_)
at java.lang.Thread.run(_Thread.java:619_)
{code}
So to overcome this error I had to place the <Resource> element in DBTest.xml under C:\Tomcat 6.0\conf\Catalina\localhost {color:#000000}and then it works fine. {color}{color:#ff0000}*Why is the context.xml file in META-INF not considered by Tomcat server using Sysdeo Plugin?*
*Thanks,*
*Deepa*{color}
{color}
Edited by: Deepa76 on May 26, 2009 9:32 PM

Beginner Help Needed

Hi all, I have been reading this board since I decided to get the Droid X and have learned a lot. Thank you. I got my phone brand new 8 days ago. I have had a few issues that I have noticed are fairly common but I thought I would post as much detail as I could to see if I have a setting or something that is causing these problems before I try to exchange the phone for another X. I don't want to wait too long for warranty sake.
1. The day I brought my phone home, I didn't know how to wake it up so I hit the power button on the top and accidentally powered it off. For the next hour it kept powering itself on and off until I took the battery out and back in. It was fine then so I put it on the charger to get a full charge before bed. I took it to bed and over 6-7 hrs it completely drained the battery and turned itself off. I put it on the charger and waited a little bit to boot it up. When I did it rebooted itself repeatedly, even dropping a two calls that came in when it was on. Pulled the battery again and it was fine. Went about 7 days with no mysterious reboots. I went to the hospital so I powered it down (using the top button) and when I turned it on it started it's rebooting cycle again until I pulled the battery. It seems I can not turn it off without having to pull the battery afterwards.
2. Battery life, I know that because this phone is so awesome, the battery is not going to last forever. That being said, a full charge on my phone lasts between 6-7 hours everytime. Right now my phone is at 40% after 3 hrs and 25 min. I have used it very little this morning. My husband got a CPO Droid X a couple of days after I got my new one and his battery is amazing. Right now it has been off the charger for 15 hrs and 19 min and still has a 60% charge left! Since his is doing so well, last night I tried to go through all of our settings and mimic his, thinking that I have something that is a huge power drain. We were basically the same already so I made a few small changes and it made no difference in battery life. The only differences right now in our phones that I can find are a few aps. He has 5 or six games and Facebook. I only have Facebook.
Here is something strange I notice while looking through our phones side by side.
Our usage statistics in the battery manager are way different.
Mine (bad battery)                                 His (excellent battery/no odd reboots)
Android OS    88%                                Display                33%
Display             5%                                Android System 23%
Phone Idle       2%                                Voice Calls         21%
Android System 2%                             Phone Idle          11%
Swype               2%                               Cell Standby        9%
Cell Standby    2%
I have tried WiFi on/Wifi off and it makes no difference, I never have GPS on, I tried manually killing the aps, I've tried leaving them running. So I don't know. My gut tells me that there is some strange glitch that makes it reboot and causes the Android OS to run way to much, but I really don't know much about this phone and want to be armed if I have to go argue for a new phone. I got this phone because my BB Storm's screen quit working after an update. The techs loaded my contracts from backup assistant to my new phone, but I knew that I hadn't run that in a long time and I was missing a ton of recent contacts.   I went back later with my Storm to see if they could transfer just the missing ones or delete the contacts in my X and pull all the old ones off the Storm. By the time they were done, I had three of every contact on my phone, we did a factory reset and loaded the again and when I got home, I had two of all of them again, what a pain! So anyway, I am not that confident in my local store. Plus, I have this one set up the way I like it and am not really looking forward to starting over. So if anyone has any suggestions or needs more info to help please let me know OR feel free to say that I need a new one if that's the case, I don't want to wait too long on that. I just need a little more battery than 6 hrs out of the box!
Jessica, and you are a saint if you read all this!

From what I am getting from your description:
1. You are probally using a task killer (Make sure to exclude system apps and Set apps to only be killed when the backlight is powered off)
Note: Others may consider task killers are not needed but the work well for me...
2. Lower Backlight
3. Disable Wifi, GPS and bluetooth when not in use.
4. Select Performance option under Settings/ Battery Manager / Battery Mode
You can usually improve battery life if you start with these rules..
If all falls a Hard Reset my help...
This has been verified as being the best way to stop a number of the issues that has developed after doing Froyo update, the system seem to keep the app and settings during installation process and this seems to cause a number of incompatible issues with a number of devices....
Follow these settings during restore to avoid issues being restored automatically.
1. Uncheck "Back up my data" under Settings/Privacy
2. Click Factory Data Reset/Reset Phone
3. After reset is complete only Active Phone but do not input Google Email information
4. Once phone is at homepage go back into Settings/Privacy and make sure the Automatic Restore option is unchecked, even if grayed out, activate "Back up my data" and quickly disable "Automatic Restore"
5. After being sure that the Automatic Restore option is off it will be safe to log into Google and you can continue installing preferred apps and custom settings.
This process will stop all applications and settings from restoring automatically and restoring original issues that usually resolve a number of issues.

New to the WRT300N - Firmware & help needed

Hi. First off, I apologize that this is going to be very long. I really hope someone will take the time to read it all and give me some help.
I posted about a week ago about problems with my WRT54GS. All of a sudden with no changes, the wireless stopped working. I tried for a few days to fix it with no luck. I decided to order the WRT300N (I figured if I was going to buy a new one, I'd upgrade and this is the one that Linksys recommended).
I should mention that after ordering the new router, the wireless on the old one started working again but it wasn't working normal. The signal quality had always pretty much been excellent and now it started going up & down but at least it was staying connected.
The new router came today. I disconnected the old one and connected the new one and everything went smoothly. Both my wired & wireless computers worked great. Less than an hour later, the wireless disconnected. I went to view available networks and my network (I use our last name) was gone. I shut off the laptop and it still didn't see the network. So I started looking at the router settings just to be sure that nothing had changed. About 15 minutes later, the laptop found the network and connected again. The signal quality dropped to good and has stayed there ever since.
Just for information, when the laptop is on the desk (which it is 90% of the time), it's only about 5 feet away from the router. I have not tried to take the laptop out of the room yet. Also more information if it helps. I have a large "U" shaped desk. My monitor for my desktop sits in the middle. On either side are the speakers. To my left (in front of me) is a UPS (plugged into this UPS is the tower, monitor, speakers, cradle for my mouse, modem & router), then the tower (I can't put it on the floor because I have physical issues that would prevent me from accessing it there). Now if I turn my chair to the left, the desk has an upper level. This is where my DSL modem & the router are. They are on the end near where the computer is on the lower level. This is the same setup we were using before. Old router worked great for almost 2 years with signal strength at excellant on the laptop. It just started acting up all of a sudden. If I go back to facing center and then turn to the right, that's where my husband's laptop sits. The only other equipment there is a calculator and a lamp and on the floor is another UPS which has his laptop (which has an Intel wireless G card in it), a laser printer, and the above mentioned calculator & lamp plugged in.
Prior to today, I had the Logitech MX3100 keyboard & mouse set. I had purchased a new mouse (Logitech MX Revolution). So I was using the keyboard from the MX3100 with the new mouse and everything was fine running that way for weeks before the problem kicked in. So I don't think it's got anything to do with the mouse. Today's setup is a little different. I am no longer using the MX3100 keyboard. I am using Logitech DiNovo Edge, which uses a bluetooth dongle. I also don't think it's any interference from this keyboard since this is a pre-existing problem.
I do have a cordless phone in the room (it's on the left hand side of the desk from where I sit at the opposite end from the modem & router...also it's one of those that doesn't need a phone line)but it's a 5.8 ghz.
The old router had the option to change the channel, etc. This one has auto for standard channel & wide channel & there's no way to change it that I can see. Radio band is also set to auto but does have 2 choices under it (standard & wide). As I said before, I use our last name for our SSID. It's the same one I've been using for years. There is no one else around here with that SSID. Network mode is mixed.
Concerning the firmware....the information for mine is WRT300N V1.1 firmware v1.51.2. I tried to look for an update but the only one in the list is the WRT300N V1.0. I did click on that but the firmware version is lower and I don't want to screw anything up. Is there a firmware update for me or not? If so, please point me in the right direction as I can't find it.
Concerning the signal strength....would it help to buy a new wireless card for the laptop? The Intel card has been updated with the newest software. The card is internal and to my knowledge can only be replaced with the same card or a bluetooth card. (Computer is a Dell XPS M140.) I do have a card slot but I'm confused because I think Dell called it an Express Card slot and I don't know whether or not the Linksys notebook card that is recommended for this router would work in this slot. If the card would work, is it worth the expense?
What else can I try. I thought about moving the router furthur to the left but it would require moving a few other items and I'm not sure if the cords are long enough. Would it help if the router & modem were not plugged into the same UPS? I do have a regular surge protecter near where my phone is. I would really rather leave them plugged into the UPS though for obvious reasons.
Also if it helps, I have the router on it's side with the 2 antennas on the end pointing straight up and the flat one in the middle I have angled this way.
I hope I have given enough information for some suggestions.
Thanks,
Lisa

Thanks for the response. I was wondering if anyone would take the time to read such a long post. I wanted to be sure to try to give as much information as possible.
My desktop (Dell XPS400) tower is made out of metal...but the router is actually not sitting on it. There is a shelf to the left of my tower (when I'm facing it, otherwise it's to the right of it). That's where the modem & router sit. The shelf sits about 3" over from the edge of the computer and it's about 7" above it.
As far as the wireless card for my husband's laptop...I'm still thinking about it. I'm wondering if there would be any improvement in speed or the quality of the connection with the N card.
Now I just went into the router's settings and tried to make the changes you suggested. I was able to change the radio band from auto to wide BUT once I do that, I loose the ability to leave the wide channel & standard channels on auto. The options for the wide channel are 3-9 and the standard are 1 & 5. I don't know which ones are best to pick so for now I'm not changing anything. I didn't change the advanced settings either as I wasn't sure if I could do that without changing the other settings first.
My husband has noted that he does see the quality of the connection occasionally jump to excellant. For the most part it's staying on good in here. We haven't brought it out into the living room yet to see what it does out there. He hasn't needed to. He has had it disconnect on him a couple of times as well.
I did forgot to mention in that book I wrote that we do live in an apartment building. We are on the 1st floor in the back of the building. Our office is between our living room & another bedroom. There is an apartment above us. There is another apartment on the other side of the other bedroom. Our bathroom is across the hall from this room, other side of that is the kitchen and then there is an apartment in the front of the building. Our front door is off the living room, a hallway seperates our apartment from another one. There are 4 apartments on each floor. Laundry (directly under us) & storage in basement.
I give all these details to try to get the best help. I don't know if all this extra info is helpful or not. We have been using Linksys routers for quite a few years now. This is our 3rd one and our 2nd wireless one. We have been in this apartment for a year now and had no trouble until a few weeks ago. Previously lived in another apartment of the same floor plan in the same complex but on the 3rd floor (boy did we hate walking up those stairs!) with no trouble.
Looking forward to hearing back from you so I can try to make the changes you suggested.
Thanks,
Lisa

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

Net info manager, Help Needed

Similar Messages

Maybe you are looking for