Net logon service paused When Server Reboot

Hi,
When ever i reboot our additional domain controller( using windows 2003 standard edition sp1)  the net logon service paused.  If i  start  the net logon service manualy its starting not an issue. The only problem is every reboot that service  paused. Blow is the log for your reference. 
Event Type:    Error
Event Source:    NTDS General
Event Category:    Service Control
Event ID:    2103
Date:        3/16/2010
Time:        1:26:54 PM
User:        NT AUTHORITY\ANONYMOUS LOGON
Computer:    CHD1DOMINO2
Description:
The Active Directory database has been restored using an unsupported restoration procedure.
Active Directory will be unable to log on users while this condition persists. As a result, the Net Logon service has paused.
User Action
See previous event logs for details.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

Hi,
Thanks, Its not an image restore
I have pasted both servers output. 
server1= chd1domino1 
server2= chd1domino2
the problem is in chd1domino2
Domain Controller Diagnosis
Performing initial setup:
   * Verifying that the local machine chd1domino2, is a DC.
   * Connecting to directory service on server chd1domino2.
   * Collecting site info.
   * Identifying all servers.
   * Identifying all NC cross-refs.
   * Found 2 DC(s). Testing 1 of them.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\CHD1DOMINO2
      Starting test: Connectivity
         * Active Directory LDAP Services Check
         * Active Directory RPC Services Check
         ......................... CHD1DOMINO2 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\CHD1DOMINO2
      Starting test: Replications
         * Replications Check
         * Replication Latency Check
            DC=ForestDnsZones,DC=vernalis,DC=com
               Latency information for 3 entries in the vector were ignored.
                  3 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
            DC=DomainDnsZones,DC=vernalis,DC=com
               Latency information for 3 entries in the vector were ignored.
                  3 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
            CN=Schema,CN=Configuration,DC=vernalis,DC=com
               Latency information for 4 entries in the vector were ignored.
                  4 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
            CN=Configuration,DC=vernalis,DC=com
               Latency information for 4 entries in the vector were ignored.
                  4 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
            DC=vernalis,DC=com
               Latency information for 4 entries in the vector were ignored.
                  4 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
         * Replication Site Latency Check
         ......................... CHD1DOMINO2 passed test Replications
      Test omitted by user request: Topology
      Test omitted by user request: CutoffServers
      Starting test: NCSecDesc
         * Security Permissions check for all NC's on DC CHD1DOMINO2.
         * Security Permissions Check for
           DC=ForestDnsZones,DC=vernalis,DC=com
            (NDNC,Version 2)
         * Security Permissions Check for
           DC=DomainDnsZones,DC=vernalis,DC=com
            (NDNC,Version 2)
         * Security Permissions Check for
           CN=Schema,CN=Configuration,DC=vernalis,DC=com
            (Schema,Version 2)
         * Security Permissions Check for
           CN=Configuration,DC=vernalis,DC=com
            (Configuration,Version 2)
         * Security Permissions Check for
           DC=vernalis,DC=com
            (Domain,Version 2)
         ......................... CHD1DOMINO2 passed test NCSecDesc
      Starting test: NetLogons
         * Network Logons Privileges Check
         Verified share \\CHD1DOMINO2\netlogon
         Verified share \\CHD1DOMINO2\sysvol
         ......................... CHD1DOMINO2 passed test NetLogons
      Starting test: Advertising
         The DC CHD1DOMINO2 is advertising itself as a DC and having a DS.
         The DC CHD1DOMINO2 is advertising as an LDAP server
         The DC CHD1DOMINO2 is advertising as having a writeable directory
         The DC CHD1DOMINO2 is advertising as a Key Distribution Center
         Warning: CHD1DOMINO2 is not advertising as a time server.
         ......................... CHD1DOMINO2 failed test Advertising
      Starting test: KnowsOfRoleHolders
         Role Schema Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         Role Domain Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         Role PDC Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         Role Rid Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         Role Infrastructure Update Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         ......................... CHD1DOMINO2 passed test KnowsOfRoleHolders
      Starting test: RidManager
         * Available RID Pool for the Domain is 5106 to 1073741823
         * chd1domino1.vernalis.com is the RID Master
         * DsBind with RID Master was successful
         * rIDAllocationPool is 4606 to 5105
         * rIDPreviousAllocationPool is 4106 to 4605
         * rIDNextRID: 4406
         ......................... CHD1DOMINO2 passed test RidManager
      Starting test: MachineAccount
         Checking machine account for DC CHD1DOMINO2 on DC CHD1DOMINO2.
         * SPN found :LDAP/chd1domino2.vernalis.com/vernalis.com
         * SPN found :LDAP/chd1domino2.vernalis.com
         * SPN found :LDAP/CHD1DOMINO2
         * SPN found :LDAP/chd1domino2.vernalis.com/VERNALIS
         * SPN found :LDAP/c965921e-927d-4e64-b32c-b677fdf81c96._msdcs.vernalis.com
         * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/c965921e-927d-4e64-b32c-b677fdf81c96/vernalis.com
         * SPN found :HOST/chd1domino2.vernalis.com/vernalis.com
         * SPN found :HOST/chd1domino2.vernalis.com
         * SPN found :HOST/CHD1DOMINO2
         * SPN found :HOST/chd1domino2.vernalis.com/VERNALIS
         * SPN found :GC/chd1domino2.vernalis.com/vernalis.com
         ......................... CHD1DOMINO2 passed test MachineAccount
      Starting test: Services
         * Checking Service: Dnscache
         * Checking Service: NtFrs
         * Checking Service: IsmServ
         * Checking Service: kdc
         * Checking Service: SamSs
         * Checking Service: LanmanServer
         * Checking Service: LanmanWorkstation
         * Checking Service: RpcSs
         * Checking Service: w32time
            w32time Service is stopped on [CHD1DOMINO2]
         * Checking Service: NETLOGON
         ......................... CHD1DOMINO2 failed test Services
      Test omitted by user request: OutboundSecureChannels
      Starting test: ObjectsReplicated
         CHD1DOMINO2 is in domain DC=vernalis,DC=com
         Checking for CN=CHD1DOMINO2,OU=Domain Controllers,DC=vernalis,DC=com in domain DC=vernalis,DC=com on 1 servers
            Object is up-to-date on all servers.
         Checking for CN=NTDS Settings,CN=CHD1DOMINO2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com in domain CN=Configuration,DC=vernalis,DC=com on 1 servers
            Object is up-to-date on all servers.
         ......................... CHD1DOMINO2 passed test ObjectsReplicated
      Starting test: frssysvol
         * The File Replication Service SYSVOL ready test
         File Replication Service's SYSVOL is ready
         ......................... CHD1DOMINO2 passed test frssysvol
      Starting test: frsevent
         * The File Replication Service Event log test
         ......................... CHD1DOMINO2 passed test frsevent
      Starting test: kccevent
         * The KCC Event log test
         Found no KCC errors in Directory Service Event log in the last 15 minutes.
         ......................... CHD1DOMINO2 passed test kccevent
      Starting test: systemlog
         * The System Event log test
         An Error Event occured.  EventID: 0x00000457
            Time Generated: 03/17/2010   19:59:56
            (Event String could not be retrieved)
         An Error Event occured.  EventID: 0x00000457
            Time Generated: 03/17/2010   19:59:57
            (Event String could not be retrieved)
         An Error Event occured.  EventID: 0x00000457
            Time Generated: 03/17/2010   19:59:58
            (Event String could not be retrieved)
         An Error Event occured.  EventID: 0x00000457
            Time Generated: 03/17/2010   20:38:22
            (Event String could not be retrieved)
         An Error Event occured.  EventID: 0x00000457
            Time Generated: 03/17/2010   20:38:23
            (Event String could not be retrieved)
         An Error Event occured.  EventID: 0x00000457
            Time Generated: 03/17/2010   20:38:23
            (Event String could not be retrieved)
         ......................... CHD1DOMINO2 failed test systemlog
      Test omitted by user request: VerifyReplicas
      Starting test: VerifyReferences
         The system object reference (serverReference)
         CN=CHD1DOMINO2,OU=Domain Controllers,DC=vernalis,DC=com and backlink
         on
         CN=CHD1DOMINO2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         are correct.
         The system object reference (frsComputerReferenceBL)
         CN=CHD1DOMINO2,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=vernalis,DC=com
         and backlink on
         CN=CHD1DOMINO2,OU=Domain Controllers,DC=vernalis,DC=com are correct.
         The system object reference (serverReferenceBL)
         CN=CHD1DOMINO2,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=vernalis,DC=com
         and backlink on
         CN=NTDS Settings,CN=CHD1DOMINO2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         are correct.
         ......................... CHD1DOMINO2 passed test VerifyReferences
      Test omitted by user request: VerifyEnterpriseReferences
      Test omitted by user request: CheckSecurityError
   Running partition tests on : ForestDnsZones
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
   Running partition tests on : DomainDnsZones
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
   Running partition tests on : Schema
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
   Running partition tests on : Configuration
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
   Running partition tests on : vernalis
      Starting test: CrossRefValidation
         ......................... vernalis passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... vernalis passed test CheckSDRefDom
   Running enterprise tests on : vernalis.com
      Starting test: Intersite
         Skipping site Default-First-Site-Name, this site is outside the scope
         provided by the command line arguments provided.
         ......................... vernalis.com passed test Intersite
      Starting test: FsmoCheck
         GC Name: \\chd1domino1.vernalis.com
         Locator Flags: 0xe00003fd
         PDC Name: \\chd1domino1.vernalis.com
         Locator Flags: 0xe00003fd
         Time Server Name: \\chd1domino1.vernalis.com
         Locator Flags: 0xe00003fd
         Preferred Time Server Name: \\chd1domino1.vernalis.com
         Locator Flags: 0xe00003fd
         KDC Name: \\chd1domino2.vernalis.com
         Locator Flags: 0xe00001b8
         ......................... vernalis.com passed test FsmoCheck
      Test omitted by user request: DNS
      Test omitted by user request: DNS
Domain Controller Diagnosis
Performing initial setup:
   * Verifying that the local machine chd1domino1, is a DC.
   * Connecting to directory service on server chd1domino1.
   * Collecting site info.
   * Identifying all servers.
   * Identifying all NC cross-refs.
   * Found 2 DC(s). Testing 1 of them.
   Done gathering initial info.
Doing initial required tests
   Testing server: Default-First-Site-Name\CHD1DOMINO1
      Starting test: Connectivity
         * Active Directory LDAP Services Check
         * Active Directory RPC Services Check
         ......................... CHD1DOMINO1 passed test Connectivity
Doing primary tests
   Testing server: Default-First-Site-Name\CHD1DOMINO1
      Starting test: Replications
         * Replications Check
         * Replication Latency Check
            DC=ForestDnsZones,DC=vernalis,DC=com
               Latency information for 3 entries in the vector were ignored.
                  3 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
            DC=DomainDnsZones,DC=vernalis,DC=com
               Latency information for 3 entries in the vector were ignored.
                  3 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
            CN=Schema,CN=Configuration,DC=vernalis,DC=com
               Latency information for 4 entries in the vector were ignored.
                  4 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
            CN=Configuration,DC=vernalis,DC=com
               Latency information for 4 entries in the vector were ignored.
                  4 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
            DC=vernalis,DC=com
               Latency information for 4 entries in the vector were ignored.
                  4 were retired Invocations.  0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc.  0 had no latency information (Win2K DC). 
         * Replication Site Latency Check
         ......................... CHD1DOMINO1 passed test Replications
      Test omitted by user request: Topology
      Test omitted by user request: CutoffServers
      Starting test: NCSecDesc
         * Security Permissions check for all NC's on DC CHD1DOMINO1.
         * Security Permissions Check for
           DC=ForestDnsZones,DC=vernalis,DC=com
            (NDNC,Version 2)
         * Security Permissions Check for
           DC=DomainDnsZones,DC=vernalis,DC=com
            (NDNC,Version 2)
         * Security Permissions Check for
           CN=Schema,CN=Configuration,DC=vernalis,DC=com
            (Schema,Version 2)
         * Security Permissions Check for
           CN=Configuration,DC=vernalis,DC=com
            (Configuration,Version 2)
         * Security Permissions Check for
           DC=vernalis,DC=com
            (Domain,Version 2)
         ......................... CHD1DOMINO1 passed test NCSecDesc
      Starting test: NetLogons
         * Network Logons Privileges Check
         Verified share \\CHD1DOMINO1\netlogon
         Verified share \\CHD1DOMINO1\sysvol
         ......................... CHD1DOMINO1 passed test NetLogons
      Starting test: Advertising
         The DC CHD1DOMINO1 is advertising itself as a DC and having a DS.
         The DC CHD1DOMINO1 is advertising as an LDAP server
         The DC CHD1DOMINO1 is advertising as having a writeable directory
         The DC CHD1DOMINO1 is advertising as a Key Distribution Center
         The DC CHD1DOMINO1 is advertising as a time server
         The DS CHD1DOMINO1 is advertising as a GC.
         ......................... CHD1DOMINO1 passed test Advertising
      Starting test: KnowsOfRoleHolders
         Role Schema Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         Role Domain Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         Role PDC Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         Role Rid Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         Role Infrastructure Update Owner = CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         ......................... CHD1DOMINO1 passed test KnowsOfRoleHolders
      Starting test: RidManager
         * Available RID Pool for the Domain is 5106 to 1073741823
         * chd1domino1.vernalis.com is the RID Master
         * DsBind with RID Master was successful
         * rIDAllocationPool is 3606 to 4105
         * rIDPreviousAllocationPool is 3606 to 4105
         * rIDNextRID: 3837
         ......................... CHD1DOMINO1 passed test RidManager
      Starting test: MachineAccount
         Checking machine account for DC CHD1DOMINO1 on DC CHD1DOMINO1.
         * SPN found :LDAP/chd1domino1.vernalis.com/vernalis.com
         * SPN found :LDAP/chd1domino1.vernalis.com
         * SPN found :LDAP/CHD1DOMINO1
         * SPN found :LDAP/chd1domino1.vernalis.com/VERNALIS
         * SPN found :LDAP/32202f44-cd9b-4322-94b1-2d8486921250._msdcs.vernalis.com
         * SPN found :E3514235-4B06-11D1-AB04-00C04FC2DCD2/32202f44-cd9b-4322-94b1-2d8486921250/vernalis.com
         * SPN found :HOST/chd1domino1.vernalis.com/vernalis.com
         * SPN found :HOST/chd1domino1.vernalis.com
         * SPN found :HOST/CHD1DOMINO1
         * SPN found :HOST/chd1domino1.vernalis.com/VERNALIS
         * SPN found :GC/chd1domino1.vernalis.com/vernalis.com
         ......................... CHD1DOMINO1 passed test MachineAccount
      Starting test: Services
         * Checking Service: Dnscache
         * Checking Service: NtFrs
         * Checking Service: IsmServ
         * Checking Service: kdc
         * Checking Service: SamSs
         * Checking Service: LanmanServer
         * Checking Service: LanmanWorkstation
         * Checking Service: RpcSs
         * Checking Service: w32time
         * Checking Service: NETLOGON
         ......................... CHD1DOMINO1 passed test Services
      Test omitted by user request: OutboundSecureChannels
      Starting test: ObjectsReplicated
         CHD1DOMINO1 is in domain DC=vernalis,DC=com
         Checking for CN=CHD1DOMINO1,OU=Domain Controllers,DC=vernalis,DC=com in domain DC=vernalis,DC=com on 1 servers
            Object is up-to-date on all servers.
         Checking for CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com in domain CN=Configuration,DC=vernalis,DC=com on 1 servers
            Object is up-to-date on all servers.
         ......................... CHD1DOMINO1 passed test ObjectsReplicated
      Starting test: frssysvol
         * The File Replication Service SYSVOL ready test
         File Replication Service's SYSVOL is ready
         ......................... CHD1DOMINO1 passed test frssysvol
      Starting test: frsevent
         * The File Replication Service Event log test
         ......................... CHD1DOMINO1 passed test frsevent
      Starting test: kccevent
         * The KCC Event log test
         Found no KCC errors in Directory Service Event log in the last 15 minutes.
         ......................... CHD1DOMINO1 passed test kccevent
      Starting test: systemlog
         * The System Event log test
         An Error Event occured.  EventID: 0x00000457
            Time Generated: 03/17/2010   20:40:08
            (Event String could not be retrieved)
         An Error Event occured.  EventID: 0x00000457
            Time Generated: 03/17/2010   20:40:09
            (Event String could not be retrieved)
         An Error Event occured.  EventID: 0x00000457
            Time Generated: 03/17/2010   20:40:10
            (Event String could not be retrieved)
         ......................... CHD1DOMINO1 failed test systemlog
      Test omitted by user request: VerifyReplicas
      Starting test: VerifyReferences
         The system object reference (serverReference)
         CN=CHD1DOMINO1,OU=Domain Controllers,DC=vernalis,DC=com and backlink
         on
         CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         are correct.
         The system object reference (frsComputerReferenceBL)
         CN=CHD1DATASERVER1,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=vernalis,DC=com
         and backlink on
         CN=CHD1DOMINO1,OU=Domain Controllers,DC=vernalis,DC=com are correct.
         The system object reference (serverReferenceBL)
         CN=CHD1DATASERVER1,CN=Domain System Volume (SYSVOL share),CN=File Replication Service,CN=System,DC=vernalis,DC=com
         and backlink on
         CN=NTDS Settings,CN=CHD1DOMINO1,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=vernalis,DC=com
         are correct.
         ......................... CHD1DOMINO1 passed test VerifyReferences
      Test omitted by user request: VerifyEnterpriseReferences
      Test omitted by user request: CheckSecurityError
   Running partition tests on : ForestDnsZones
      Starting test: CrossRefValidation
         ......................... ForestDnsZones passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... ForestDnsZones passed test CheckSDRefDom
   Running partition tests on : DomainDnsZones
      Starting test: CrossRefValidation
         ......................... DomainDnsZones passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... DomainDnsZones passed test CheckSDRefDom
   Running partition tests on : Schema
      Starting test: CrossRefValidation
         ......................... Schema passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... Schema passed test CheckSDRefDom
   Running partition tests on : Configuration
      Starting test: CrossRefValidation
         ......................... Configuration passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... Configuration passed test CheckSDRefDom
   Running partition tests on : vernalis
      Starting test: CrossRefValidation
         ......................... vernalis passed test CrossRefValidation
      Starting test: CheckSDRefDom
         ......................... vernalis passed test CheckSDRefDom
   Running enterprise tests on : vernalis.com
      Starting test: Intersite
         Skipping site Default-First-Site-Name, this site is outside the scope
         provided by the command line arguments provided.
         ......................... vernalis.com passed test Intersite
      Starting test: FsmoCheck
         GC Name: \\chd1domino1.vernalis.com
         Locator Flags: 0xe00003fd
         PDC Name: \\chd1domino1.vernalis.com
         Locator Flags: 0xe00003fd
         Time Server Name: \\chd1domino1.vernalis.com
         Locator Flags: 0xe00003fd
         Preferred Time Server Name: \\chd1domino1.vernalis.com
         Locator Flags: 0xe00003fd
         KDC Name: \\chd1domino1.vernalis.com
         Locator Flags: 0xe00003fd
         ......................... vernalis.com passed test FsmoCheck
      Test omitted by user request: DNS
      Test omitted by user request: DNS

Similar Messages

  • JRE SE v1.4.1_07 crashes when server reboots

    Hi All, we have JRE SE v1.4.1_07 and JRE SE v1.4.0_06 installed in Citrix Servers, JRE v1.4.1_07 is required for a web browser based application. Whenever server reboots, we need to reinstall the JRE SE v1.4.1_07 to work the browser application.
    is it because of multiple version on the same server or is there any other reasons?
    Any help is appreciated..
    Thanks.
    Manoj

    Hi, Thx. for response.
    Why do you have to reinstall 07? We have Web Browser application which require JRE 07 as plug in to work. whenever server reboots, the application stops functioning but if reinstall the 07 version, it works fine.
    Also, when you say web browser based app. It makes me
    wonder why you need a JRE? Or are you saying a web
    container that needs it?Yes, the application require to JRE to work.
    Thanks.

  • Unable to start crsd when server rebooted

    Hi,
    We are trying to run root.sh and it is failing with below error and it is happening since server rebooted.
    [ohasd(18477)]CRS-2771:Maximum restart attempts reached for resource 'ora.crsd'; will not restart.
    No errors found in crsd.log files.
    /u02/oracle/app/11.2.0/grid1/log/lapvueestw03/crsd/crsd.log
    Please let us know how to proceed further.
    Thanks in advance.

    please clarify...why did you ran root.sh on the node? are you trying to install GI or Oracle Home?? Provide alert log and crsd log details...

  • Print Services inactive after server reboot

    Hi,
    after each server (10.4.7) reboot, the Print Services remain inactive. I have to stop/start the Print Services using Server Admin to resume normal operations.
    Is this a bug or a feature?
    Regards,
    Andre
    Mac Mini PPC, 1,25 GHZ   Mac OS X (10.4.7)  

    I have the exact same issue. With the help of another discussion thread, I discovered the following:
    1) After restarting the server, if you use Network Utility to port scan your server, you'll probably find that port 515 ("LPR Printing") is blocked. This was true for me even when I turned the Firewall service off altogether.
    2) After stopping and restarting the Print Service in Server Admin, if you port scan your server again, you'll find that port 515 is now open.
    Strange...
    -- Steve

  • Oracle doesn't started when When I reboot the Server.

    Dear All,
    I have installed 10g using ASM and Oracle-managed files on a Windows Server 2003 (Second Edition , Service Pack 1 ) system . I have put no data in, and I take the defaults. It works fine - until the system reboots.
    Oracle doesn't started when When I reboot the Server.
    Here is what I get from sqlplus, following the instructions to start an ASM instance:
    SQL*Plus: Release 10.1.0.2.0 - Production on Mon Oct 11 10:47:53 2006
    Copyright (c) 1982, 2004, Oracle. All rights reserved.
    SQL> startup
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+DATA0/10g/spfile10g.ora'
    ORA-17503: ksfdopn:2 Failed to open file +DATA0/10g/spfile10g.ora
    ORA-15077: could not locate ASM instance serving a required diskgroup
    Thanks for helping,
    Debraj Banerjee

    It look like your ASM instance is not yet started. Try the following:
    $>export ORACLE_SID=+ASM (set ORACLE_SID=+ASM if you are on Windows)
    $>sqlplus /nolog
    SQL>startupThen you start up your other instance.

  • Opmn does not start all processs when server ( windows 2003 is rebooted ).

    There is a startup script which starts every process when run from cmd. But when the server is rebooted it does not start Portal, WebCache.
    The startup Script :
    @ECHO OFF
    REM ---------------------------------------------
    REM 10gAS Rel 2 Midtier startup script
    REM ---------------------------------------------
    date /t
    time /t
    REM ----------------------------------
    REM Set Oracle Home
    REm -----------------------------------
    set ORACLE_HOME=d:\Oracle\Ora10gMid
    set PATH=%ORACLE_HOME%\bin;%ORACLE_HOME%\dcm\bin;%ORACLE_HOME%\opmn\bin;%PATH%;
    REM ----------------------------------
    REM startup ProcessManager (OPMN)
    REM ----------------------------------
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startall
    call %ORACLE_HOME%\opmn\bin\opmnctl start
    call %ORACLE_HOME%\opmn\bin\opmnctl startproc ias-component=WebCache
    call %ORACLE_HOME%\opmn\bin\opmnctl startproc ias-component=OC4J
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=WebCacheAdmin
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=home
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=OC4J_BI_Forms
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=OC4J_Portal
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc process-type=HTTP_Server
    REM call %ORACLE_HOME%\opmn\bin\opmnctl startproc ias-component=Discoverer
    ======================================================
    I tried starting each process type individually and it does not start OC4J and WebCache components. This does not work only during reboot.
    Thanks in advance for our valuable suggestions
    v

    no bat file is needed for opmn to startall on service restart or system reboot. Opmn remembers the state of the services on a clean shutdown of the service & will bring it back. So just do a opmn startall, then restart the Oracle<OraHome>ProcessManager service & check using opmn status. All services should be in the same state as before the Oracle<OraHome>ProcessManager was restarted.
    where/why are you trying to use a bat file to stopall/startall? It can be done via a script, but the user that starts the bat file MUST be the same user that installed OAS/OID.

  • Executing 2nd command after server rebooted & related services started

    hi friends
    i am creating a PS script containg two lines:
    the first line executes dcpromo /unattend:c:\answerfile.txt to create a new domain controller
    the second line will disable domain password complexity which is: 
    set-executionPolicy -identity mydomain.lab -complexityenabled $false -minimumpasslength 5
    the problem is i need after first line of the script, executed, server be rebooted & the 2nd line 
    be executed after server rebooted & whey AD services started, this script continue to run the next line.
    is it ossible in powershell?
    thanks in advanced

    You won't be able to do that in the same script.
    You can use a second script that waits for the AD services to start, and then sets the password policies and run that script after the restart using the RunServicesOnce key:
    https://support.microsoft.com/kb/179365?wa=wsignin1.0
    Use the first script to set that key and then do the restart after the DC promo is finished.
    [string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "
    hi again. thanks
    in addition i found that the powershell workflow is better way to that
    regards

  • I get an web service error when trying enable web services. I have latest update and rebooted

    i get an web service error when trying enable web services. I have latest update and rebooted

    hi there philnj,
    could you help the community narrow troubleshooting by providing a little more information? Particularly what model printer are we dealing with?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • DPM 2012 SP1 long term backup fails when protected server reboots

    Hi,
    we're using DPM 2012 SP1 with Short-term and long-term protection.
    We use a daily short-term backup to disk and a weekly long-term to tape.
    We are noticing that when a long-term tape backup is running, it fails when we reboot one of the protected servers.
    Is anyone else having this issue ? I assumed the long-term tape backup will be created from a disk-recovery point. 

    Hi,
    What is the detailed error code in the properties of the failed initial replica or consistency check job ?
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
    This posting is provided "AS IS" with no warranties, and confers no rights.

  • RE: NT Server Reboot and Forte Partitions[Ref:C943460]

    Hi Bradley.
    At our customers, we need one of our Forte applications to be running for data
    communications to take place. After a reboot, we need this application's
    partitions to come online. The way we did this (as you suggested) was to use a
    BAT file, and then install this as an NT service (we used a utility that comes
    with the NT resource kit - srvany).
    This works fine for us. One of the issues we had was that the partitions tried
    to come online before Oracle was running - this resulted in the dbsessions
    failing and the partitions not coming online. We got round this by preceding
    starting the partitions with a loop that polled Oracle until it was up. Needless
    to say, piping all output to log files was essential for us to figure out what
    was going on.
    Hope this helps,
    Steve Elvin
    Systems Developer
    Frontline Ltd.
    UK
    -----Original Message-----
    From: INTERNET [email protected]
    Sent: Monday, November 02, 1998 11:04 PM
    To: Steve Elvin; X400
    p=NET;a=CWMAIL;c=GB;DDA:RFC-822=Forte-Users(a)sagesoln.com;
    Subject: NT Server Reboot and Forte Partitions [Ref:C943460]
    I have a system administration question for users with NT servers in
    their Forte environment. If I have installed Forte partitions on an NT
    server which I would like to startup when the server is rebooted, then
    what are my options for scripting this to happen automatically?
    Currently the only Forte process on the server which starts up
    automatically is the Forte node manager, through the installed NT
    service. I have been contemplating setting up a BAT file process as an
    NT service which would wait for the Forte node manager service to start,
    and then execute an fscript file to start the required forte partitions.
    How is this situation being handled in other environments? Thanks.
    Bradley K Wells
    Strong Capital Management, Inc
    [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi Brad,
    I am not sure if this is the right solution in the long run, but if you
    login into NT after reebot you can create a simple client that "pings" your
    service objects and put the shortcut into the Startup Group. I think such a
    client may also be useful to monitor your Forte server for application
    specific parameters, instead of relying only on logs/econsole.
    David
    At 04:18 PM 11/2/98 -0600, you wrote:
    I have a system administration question for users with NT servers in
    their Forte environment. If I have installed Forte partitions on an NT
    server which I would like to startup when the server is rebooted, then
    what are my options for scripting this to happen automatically?
    Currently the only Forte process on the server which starts up
    automatically is the Forte node manager, through the installed NT
    service. I have been contemplating setting up a BAT file process as an
    NT service which would wait for the Forte node manager service to start,
    and then execute an fscript file to start the required forte partitions.
    How is this situation being handled in other environments? Thanks.
    Bradley K Wells
    Strong Capital Management, Inc
    [email protected]
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

  • Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2

    Remote App and Desktop RDP client never succeed to logon the RDS gateway server running Windows 2012R2
    1. Client Os : Windows 7 Pro
    2. Server OS : Windows Server 2012R2 with RDS broker and RDS Gateway server with 3.part Certificate  with friendly name sky.mti-itservice.no activated.
    The  main problem is following: The RDP logon session never ends
    Any ideas ?
    Regards
    Kenneth Knudsen
    Email : [email protected]
    mvh Kenneth Knudsen MCSE 2003 HP ASE

    Hi Kenneth,
    Here for your case suggest you to configure RDP session time limit so that your user can disconnect\log off once the specific time limit reached.
    You can setup the session time limit in different method.
    1. Open the Server Manager, select Remote Desktop Services.
    2. In Remote desktop Services, in right side you can drop down to collections.
    3. Select the collection which you want to edit the settings.
    4. Under collections Properties, select Task and then Edit Properties.
    5. In Properties dialog box, select Session.
    6. You can find all thetimeout settings under session collection properties; edit according to your requirements and then OK. 
    And apart also by group policy setting as below.
    Computer Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits 
    User Configuration\Policies\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Session Time Limits 
    -  Set time limit for disconnected sessions
    -  Set time limit for active but idle Remote Desktop Services sessions
    -  Set time limit for active Remote Desktop Services sessions
    -  End session when time limits are reached
    Please check which setting suitable for your environment and you can apply for your case.
    [Forum FAQ] Restrict number of Active Sessions in RDS 2012 and 2012 R2
    https://social.technet.microsoft.com/Forums/en-US/00c2252b-8ec0-489f-8da2-07a434a9b5a2/forum-faq-restrict-number-of-active-sessions-in-rds-2012-and-2012-r2?forum=winserverTS
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    TechNet Community Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • "unable to connect to the data access service" installing report server

    Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012.  Management server and operations console on one, and SQL, web console, and reporting server on the other.  When I get to the web console and reporting server install, and
    the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
    "Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."  
    Here is the setup log error:  
    "Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
    too long."
    I don't see the "Data Access" service in services on either server.  I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
    http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
    Everything seems to be working until I get to this point. 
    Thank you for any help you can provide,
    Dan

    Hi Tom,
    1. Did the setup complete successfully on the MS and Console server?
    >>>Yes, without issue
    2. You do not see the service "System Center Data Access Service"
    >>>I do indeed see it on the MS and Console server, it is set to Auto and running.  (I also tried rebooting this server and retried, no help)
    3. Is the Windows Firewall enabled?
    >>>It has symantec endpoint protection.  I disabled symantec completely on both servers and retried, no help.
    Thx,
    Dan

  • Reporting Services through ISA server for All Authenticated Users

    Hello colleagues.
    I have MS SQL 2012 server with Reporting Services and it work via link:
    https://reports2.domain.com/reports
    In LAN all work fine, but I want publish this resource via ISA for All Authenticated Users.
    When in publish rule I configure (in Condition) "All users" - all work fine, but when I configure "All Authenticated Users" - I have trouble on web form on
    https://reports2.domain.com/reports/Pages/Report.aspx?ItemPat...  - scripts not work, because it run how "anonymous" (I see on ISA logging) and ISA block scripts.
    I can't use "All Users", because it's not secure.
    Maybe somebody publish Reporting Services through ISA server for All Authenticated Users?
    OR maybe - how on Reporting Services configure Negotiate authenticated for scripts?

    Hi Alexander,
    All users or applications who request access to report server content or operations must be authenticated using the authentication type configured on the report server before access is allowed. The AuthenticationType named RSWindowsNegotiate is supported
    by Reporting Services. To configure Windows Authentication on the Report Server, please see:
    http://msdn.microsoft.com/en-us/library/cc281253(v=sql.110).aspx
    Besides, we can publish report server via ISA server. Please note that you should use a new web port number with a new listener which shouldn’t be used by other web site for report server. Reference:
    http://social.technet.microsoft.com/Forums/forefront/en-US/1cc68996-1ce6-4d88-a30d-2bfd13fba06e/how-to-publish-ssrs-2008-through-isa-2006?forum=Forefrontedgegeneral
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support
    Katherine thanks for answer.
    Report Server service started as Domain account.
    I have in RSReportServer.config this:
    <Authentication>
    <AuthenticationTypes>
    <RSWindowsNegotiate />
    </AuthenticationTypes>
    <RSWindowsExtendedProtectionLevel>Allow</RSWindowsExtendedProtectionLevel>
    <RSWindowsExtendedProtectionScenario>Proxy</RSWindowsExtendedProtectionScenario>
    <EnableAuthPersistence>true</EnableAuthPersistence>
    </Authentication>
    In web.config I have this:
    <authentication mode="Windows" />
        <identity impersonate="true" />
    I can go (from Internet through ISA) to
    https://reports2.domain.com/reports  and LogOn Authentication is work, but scripts not work, because it run how "anonymous" (I see this on ISA logging) and ISA block scripts.
    Do you know where in Reporting Services configure run scripts with Negotiate authentication?

  • Unable to install Integration Services for SQL Server 2005

    I'm not able to select "Integration Services Project" in Business Intelligence Development Studio (it is not in the templates below):
    When installing, it says that it is already installed. Why can't I see it in the project templates?

    Microsoft Visual Studio 2005
    Version 8.0.50727.867  (vsvista.050727-8600)
    Microsoft .NET Framework
    Version 2.0.50727 SP2
    Installed Edition: Professional
    Microsoft Visual Basic 2005   77626-009-0000007-41773
    Microsoft Visual Basic 2005
    Microsoft Visual C# 2005   77626-009-0000007-41773
    Microsoft Visual C# 2005
    Microsoft Visual C++ 2005   77626-009-0000007-41773
    Microsoft Visual C++ 2005
    Microsoft Visual J# 2005   77626-009-0000007-41773
    Microsoft Visual J# 2005
    Microsoft Visual Studio 2005 Tools for Applications   77626-009-0000007-41773
    Microsoft Visual Studio 2005 Tools for Applications
    Microsoft Visual Web Developer 2005   77626-009-0000007-41773
    Microsoft Visual Web Developer 2005
    Microsoft Web Application Projects 2005   77626-009-0000007-41773
    Microsoft Web Application Projects 2005
    Version 8.0.50727.867
    AnkhSVN - Subversion Support for Visual Studio   2.5.12440.9
    AnkhSVN - Subversion Support for Visual Studio 2.5.12440.9 
     * Ankh.Package 2.5.12440.9
     * Subversion 1.8.8 via SharpSvn 1.8008.3178.19
    SharpSvn is linked to: Apr 1.5.0, Apr-util 1.5.3, Cyrus Sasl 2.1.25, eXpat 2.0.1, OpenSSL 1.0.1g 7 Apr 2014, serf 1.3.4, SQLite 3.7.17, Subversion 1.8.8-SharpSvn-1.8.8, ZLib 1.2.8
    SharpSvn is optionally linked to: Berkeley DB 4.4.20, SharpPlink 1.8008.3178.19
    Hotfix for Microsoft Visual Studio 2005 Professional Edition - ENU (KB2938803)   
    Microsoft Visual Studio 2005 Professional Edition - ENU Service Pack 1 (KB926601)   
    Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB2251481)   
    Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB2538218)   
    Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB2548826)   
    Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB971090)   
    Security Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB973673)   
    SQL Server Reporting Services   
    Microsoft SQL Server Reporting Services Designers 
    Version 9.00.2047.00
    Update for Microsoft Visual Studio 2005 Professional Edition - ENU (KB932232)   

  • Oracle 10G Db Starts-up After Server Reboot, BUT Goes DOWN After Some Time

    Hi All,
    I am really puzzled over this one. I have couple of servers running DB on them and I have used scripts to auto-enable them when server(s) reboot.
    But there is one server where I see this funny behavior.
    The DB comes-up after server reboot.
    I can verify that in the startup logs and some more logs that I created.
    I can see that LISTENER is able to communicate also.
    But after a while, the DB shuts-down....!!
    I have checked all the places I could. I have also tried to see the difference between this server and others (I did not install this one), but can not see any difference.
    Is there anyway to find out (log) what is shutting down the DB??
    Any help will be much appreciated as I am at my wits end.
    Following is snap-shot from my logs:
    Fri Mar 16 20:42:29 EDT 2007
    Running dbstart.
    Done with starting all, let's check status...
    Fri Mar 16 20:42:42 EDT 2007
    LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 20:42:42
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
    Start Date 16-MAR-2007 00:46:56
    Uptime 0 days 19 hr. 55 min. 46 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File /oracle/product/10.2.0/Db_1/network/admin/listener.ora
    Listener Log File /oracle/product/10.2.0/Db_1/network/log/listener.log
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.103.253.50)(PORT=1521)))
    Services Summary...
    Service "orcl" has 2 instance(s).
    Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orclXDB" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    Service "orcl_XPT" has 1 instance(s).
    Instance "orcl", status READY, has 1 handler(s) for this service...
    The command completed successfully
    Current Status:
    # date
    Fri Mar 16 21:30:40 EDT 2007
    # su - oracle -c "lsnrctl status"
    Sun Microsystems Inc. SunOS 5.10 Generic January 2005
    LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:30:53
    Copyright (c) 1991, 2005, Oracle. All rights reserved.
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Solaris Error: 146: Connection refused
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.103.253.50)(PORT=1521)))
    TNS-12541: TNS:no listener
    TNS-12560: TNS:protocol adapter error
    TNS-00511: No listener
    Solaris Error: 146: Connection refused

    I was just looking at that.. Thanks for the tip.
    Following is what I see. But not sure what does it tell me?? Please help......
    From alert_orcl.log:
    <snip>
    db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
    user-specified limit on the amount of space that will be used by this
    database for recovery-related files, and does not reflect the amount of
    space available in the underlying filesystem or ASM diskgroup.
    Fri Mar 16 20:42:41 2007
    Errors in file /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc:
    ORA-00604: error occurred at recursive SQL level 1
    ORA-12663: Services required by client not available on the server
    ORA-36961: Oracle OLAP is not available.
    ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
    ORA-06512: at line 15
    Fri Mar 16 20:42:42 2007
    Completed: ALTER DATABASE OPEN
    From /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
    # cat /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
    /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
    Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
    ORACLE_HOME = /oracle/product/10.2.0/Db_1
    System name: SunOS
    Node name: gcars0j6
    Release: 5.10
    Version: Generic_118833-24
    Machine: sun4u
    Instance name: orcl
    Redo thread mounted by this instance: 1
    Oracle process number: 15
    Unix process pid: 7700, image: oracle@gcars0j6 (TNS V1-V3)
    *** SERVICE NAME:() 2007-03-16 20:42:37.548
    *** SESSION ID:(159.3) 2007-03-16 20:42:37.548
    Thread 1 checkpoint: logseq 255, block 2, scn 8602014
    cache-low rba: logseq 255, block 3
    on-disk rba: logseq 255, block 767, scn 8602399
    start recovery at logseq 255, block 3, scn 0
    ----- Redo read statistics for thread 1 -----
    Read rate (ASYNC): 382Kb in 0.16s => 2.33 Mb/sec
    Total physical reads: 4096Kb
    Longest record: 3Kb, moves: 0/1066 (0%)
    Change moves: 1/8 (12%), moved: 0Mb
    Longest LWN: 308Kb, moves: 0/29 (0%), moved: 0Mb
    Last redo scn: 0x0000.0083431e (8602398)
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 149/149 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 1925/2083 = 0.9
    *** 2007-03-16 20:42:37.702
    KCRA: start recovery claims for 149 data blocks
    *** 2007-03-16 20:42:37.705
    KCRA: blocks processed = 149/149, claimed = 149, eliminated = 0
    *** 2007-03-16 20:42:37.706
    Recovery of Online Redo Log: Thread 1 Group 2 Seq 255 Reading mem 0
    ----- Recovery Hash Table Statistics ---------
    Hash table buckets = 32768
    Longest hash chain = 1
    Average hash chain = 149/149 = 1.0
    Max compares per lookup = 1
    Avg compares per lookup = 2054/2074 = 1.0
    Error in executing triggers on database startup
    *** 2007-03-16 20:42:41.963
    ksedmp: internal or fatal error
    ORA-00604: error occurred at recursive SQL level 1
    ORA-12663: Services required by client not available on the server
    ORA-36961: Oracle OLAP is not available.
    ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
    ORA-06512: at line 15

Maybe you are looking for

  • Tcp/ip ni-visa commands using visual basic

    what are the dll and bas files i need to communicate with a device via rj45 cable thru visbual basic , i can communicate when i use hyperterminal but i can't via visual basic tcpip::192.168.48.11:: this is where i'm stuck Solved! Go to Solution.

  • Json PUT method business service invoke via OSB

    Hi, I have to invoke business service that takes input as json object. I have followed following steps to create the project. 1. I have setup business service with "Messaging Service", and selected TEXT as request and response. 2. Created proxy servi

  • Move iTunes library from Mac to PC

    Hi! Just because I'm her web developer, my client thinks I know about all things computer. =) So I will post her question here in hopes that someone can help me out (and thus, help her). What is the proper way to move an iTunes library from a Mac (OS

  • SRP521W-K9-G1 problem with MODEM Huawei e160

    /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm

  • [solved] Can't upgrade system....

    [meskarune@Lychee ~]$ sudo pacman -Syu :: Synchronizing package databases... core is up to date extra is up to date community is up to date archlinuxfr is up to date :: Starting full system upgrade... resolving dependencies... error: cannot resolve "