Net payroll to 3rd party outsourcing-US
Hello experts,
Our client has decided to perform Gross payroll inhouse and outsource Net payroll to third-party company ADP in US. what are the pre-requisties for this requirement. Please advise ! How complex is it please advise.
Janet
Hi,
This is not a complex process, Interfacing with ADP is very standard in US. But you need to understand, your clients requirement.
Understand the SOW with ADP, what all work they would be doing and how much will be done in SAP?
Where do they want to see the results?-RT or Infotypes or both.
Do you have BI system for HR? - Net payroll data also has to be loaded
Whose does the bank transfers, Payslip print out?
Does the client require payslips on portal?
Client requirement of payroll posting to SAP FICO?
Post payroll data to Benefits vendor and other HR 3rd party softwares like recruiting systems, time, commuter benefits,...
Use the ADP interfacing tables in SAP for custom program, PA/PSA mapping to ADP data.
Thanks,
Amosha
Similar Messages
-
Receiving net payroll data from 3rd party (ADP)
We are currently outsourcing 3rd party payroll to ADP. Master Data and Time Wage Type IDOCs are transmitted. After payroll processing, G/L data is downloaded through ADP Infolink G/L interface website as a .csv file.
We want to receive G/L data back from ADP in standard SAP IDOC format. I have posed this question to ADP support with no luck.
Has anyone imported G/L net payroll data back from ADP as an IDOC? Is this considered a different product than web-based Infolink G/L?
thanks,
EricHello Eric,
We are currently in the process of implementing ADP and do master data transfer from HR to ADP.
Would you be willing to have a quick phone call with me interms of lessons learned and advice from you on this.
Please let me know.
Thanks,
Girish -
Outsourcing of Benefits to 3rd Party
Hello... we are currently using the SAP HR Benefits module, but will soon be outsourcing our HR Benefits administration to a 3rd party. The 3rd party will be sending us the benefits deductions via an interface, so that we may incorporate them into our SAP Payroll run. My question is the following: is it better to store the benefits deductions on infotype 14, or does it make sense to continue to configure SAP HR Benefits and store the deductions on the benefits infotypes utilizing the 'alternative cost' field? Opinions welcome...thanks.
Hello Linda,
Since the third party will be sending you the benefits deductions via an interface, it would seem logical to me to transfer them directly into IT0015, every pay or every month(according to your needs).
As for the configuration of Benefits in SAP, you could keep it in place and comment out functions P0167 and P0168 in your schema. If you want to be able to generate reports on enrollments, it would be preferable if the information could be maintained in SAP (perhaps an other interface).
Sorry for the late answer but I just noticed your thread.
And for SapUser1204, you should identify your needs (requirements) before trying to define the interface parameters.
When you have identified these needs, please open your own thread. -
Hi SAP Gurus,
We have a requirement to process Gross Payrun for our UK client and send the payroll outsourcing file to the 3rd party. Would like to know if it is possible to send the PY data as IDOC to the 3rd party for UK.
Thanks
LakshmiI also have the same question?
can we use SAP XI for the interface? how about IDOCs? what difference does it make to the implementation? -
RPTEZL00 PDC time evaluation (supply to 3rd party payroll system).
Hi All,
Please let us know if any of you have worked on RPTEZL00 PDC time evaluation (supply to 3rd party payroll system).
We have an issue where in our end user has run this report for the month of july twice once on 21st july 2008, again
on 12.08.2008, in the second run she has selected with recalculations instead of "diff also in current period".
Please let me know is there any way to get the data again for diff also in the current period only.
Thanks
Veeresh G. R.system generated Idoc or the file
-
How to import payroll result from 3rd party system to SAP
Hi Experts,
May i know how to import payroll result from legacy system / 3rd party payroll system into SAP.
i need to import the payroll result from Jan - April (from 3rd party payroll system) and system go live on May. I using payroll malaysia.
Thanks.check this link
http://help.sap.com/saphelp_40b/helpdata/en/91/80e9087834d111a4620060b03c3b0e/content.htm -
My bank (Chase) and my wife's payroll provider (ADP) say I can no longer pull our statements because of incompatibilities between Adobe Reader and Safari. The Apple site says it is not responsible for for 3rd party software. Adobe says go back to Safari 5.0. Apple dosen't let me download Safari 5.0; so what do I do. The bank had me download Chrome, and I can now download my statements. but what a pain. Any suggestios?
Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Can PU12 fetch results from 3rd-party payroll systems?
Gurus:
We have configured PU12 to export master data or master/payroll data to 3rd-part systems.
Could you tell us how to fetch the results from external 3rd-party systems back to our ECC system?
Thanks!Hi Ashley,
You can import the wage types from 3rd party systems into SAP. Then you can run the payroll in SAP system.
Check the following description taken from help.sap.com.
You use the Import wage types function to transfer wage types from a third-party system to the
payroll results of the SAP System.
For more information, see the Implementation Guide (IMG) for Cross Application
Components under Predefined ALE Business Processes Human Resources
HR External Systems Connection With an External Payroll System Import
Payroll Results or in the SAP Library under CA Cross Application Components
Business Framework Architecture (CA-BFA) Library of ALE Business Processes
Human Resources Human Resources - External Applications Process Flow:
Import Payroll Results from a Third-Party System [Ext.].
Starting the Import
Prerequisites
You have successfully run payroll in a third-party system.
Procedure
1. In the menu, choose Import wage types Create IDocs.
You access the IDoc Inbound Processing Via File screen.
2. In the Complete file name field, enter the name of the input file.
3. Choose Execute.
The system message contains the number of created IDocs.
4. In the menu, choose File Import wage types Create IDocs.
You access the Inbound Processing of IDocs Ready for Transfer screen.
5. Enter MANAGEREXTPAYROLL_INSERTOUT as the Message type and, if required, enter the
Creation date and the Creation time.
6. Choose Execute.
Result
The wage types created in the third-party system are available for further processing in the
interface tables of the SAP System.
You can then start payroll in the SAP System and perform the subsequent payroll activities:
Create a remuneration statement
Run posting to Accounting
Regards,
Dilek -
Hello Experts,
I'm working on an implementation of DP and SNP within the SCM System, where we'll use DP to forecast our in-feed (across our 3rd party (3P) vendors) and transfer it to SNP. Once in SNP I need to net out inventory quantities, which is in a typical scenario no problem and quite easy. however, the scenario i am working doesn't seem to quite fit from what i understand and where i need some guidance.
First let me say i am looking for guidance on what documenation i could read that would help me solve my problem. Whether it be help documentation, white papers, etc.
In my organization, we have fully outsourced our operations to various 3rd party vendors, but we perform all the material planning so the material distributor(s) know how much material is going to be required to fulfill our network. The challenge i am facing is what is the best way to track the inventory levels at the various 3rd party locations? Please keep in mind we do not own nor manage the 3rd party inventory. Which means we do not perform GR or GI nor are we involved in the purchasing or selling of materials but, we need visibility into their inventory for netting in SNP. The first thought was to simply put the inventory quantities for each 3P into a BW cube and pull it from there. I haven't ruled this option out but before i committ to this i'd like to know if there is a standard solution to this problem. is there a way to store the inventory in ECC and CIF to SCM or whether storing the inventory directly in SCM. At this point i am not set on any given idea and i am really looking for a standard way to track our 3rd party inventory. one last comment is, i'm not opposed to using a standard modulel/process in a non-standard method meaning if there is a module out there that does 75 to 90 % of what i want but i have to rework somethings i'm open to that as well.
thank you in advance for taking the time to review my question.
MikeHi Mike,
I can think of the following options:
1) Are your vendors already a part of network in R/3? If yes, then you could get the inventory data from them using EDI. Then you could pass on this data to APO, and it could be used in planning.
2) You could also get the inventory data through EDI directly into APO. Then it could be used for planning.
Both the above 2 options would require that your vendors use some system and you need to maintain the EDI interface. If they are using only 2-3 types of systems, then it might be simple to get the data, but if there are lot of vendors using different type of systems, it could be quite complex to setup up the infrastructure.
3) I understand its also possible to get stock data from vendors using SNC, but I am not very clear if the same data could be used in APO-SNP or not.
PS: There would also be a possibility to upload stock using some custom program. You would not be able to get stock data in APO from the cube as far as I know (unless you have defined some custom time series key figure for stock).
Thanks - Pawan -
Credit Memo process in 3rd party order
Hello All,
Once 3rd party invoice is completed process as follows: (standard process)
sale order --> Purchase Requisition --> Purchase Order --> Goods Receipt --> Invoice Verification --> Customer Invoice.
When you post the customer invoice to accounting, in general system will update
1.Net Value 2. COGS (Cost of goods sold) 3. Sales Qty.
Now the scenario is when the vendor cancel his original invoice and reissue the invoice (due to change in price / change in stock item and so on..),
We have to cancel the customer invoice and issue credit memo invoice (without any reference) for the customer.
But the problem here is.. when we post the credit invoice to accounting, COGS will not be updated (currently they are adjusting COGS value manually).
How can we map this scenario ? while creating credit memo invoice we should consider some reference so that COGS should be updated.Hello Suresh,
THERE ARE TWO SCENARIOS HERE.
Scenario is when the vendor cancel his original invoice and reissue the invoice (due to change in price / change in stock item and so on..),We have to cancel the customer invoice and issue credit memo invoice (without any reference) for the customer.
> IF THE VENDOR GRANTS YOU A CREDIT MEMO ON THE QUANTITY OR VALUE BASIS, YOU CAN DIRECTLY PASS ON THIS TO CUSTOMER BY RAISING CREDIT MEMO (THIRD PARTY CREDIT MEMO IS G2S), THIS WORKS WITH ITEM CATEGORY 'TASG' (THIRD PARTY CREDIT MEMO ITEM). THE SALES RELEVANT INDICATOR ' F' IS SET IN CUSTOMISING FOR SALES FOR THIS ITEM CATEGORY. THIS MEANS THAT THE COST IS NOT CREATED.
--->IF THE VENDOR CALCULATES ADDITIONAL COSTS FOR YOU ONCE THE THIRD PARTY BUSINESS TRANSACTIONS HAVE ALREADY BEEN BILLED. THE COSTS FROM THE INVOICE RECEIPT ARE THEN CORRECTED IN THE CUSTOMER BILLING DOCUMENT WHICH HAVE ALREADY BEEN CREATED. SUBSEQUENT DEBITS FROM THE INVOICE RECEIPTS ARE COPIED TO PROFITABILITY ANALYSIS AS A DIFFERENCE AMOUNT. THIS MEANS THAT THE COST IS UPDATED HERE ALSO. IN ACCRUED PROFITABILITY ANALYSIS, THE COSTS ARE NOT COPIED FROM THE INVOICE RECEIPT, BUT FROM THE CUSTOMER BILLING DOCUMENT.
EXAMPLE:In the context of a third-party business transaction, you create a sales order for over 100 pieces.
A purchase requisition and a purchase order are generated. Ten pieces are delivered to the customer, and a billing document is then sent to the customer when the 10 pieces are delivered. The vendor sets a subsequent debit of 100 USD for shipping costs in the invoice. The cost is nowupdated in the billing document created, and in the profitability analysis (in this case, it is raised
by 100 USD). -
3rd Party AU's VST's in GB'08?
I have been collaborating with a Garageband user and I am on Logic 7.1.1
Now I have Garageband '08 which opens his session/files fine, but in GB can i change the sounds of some of the MIDI loops?
I have East West Colossus which I'd rather use my sounds from than the Garageband ones..Its just i dont know my way around GB..
I did open the GB session and I did ses that my ReFX Vanguard was in a list on the right of the screen?
Does this mean that it can use 3rd party AU's and VST's?
Thanks :crazy:GB can send Midi out to an external synth or similar if you use MidiO.
I've used my microKORG to send MIDI into the GB, then turned it around and used MidiO to send it back out to the microKORG with no problems.
You can find it here:
http://mysite.verizon.net/retroware/
as well as on VersionTracker. -
Is it possible for a 3rd party program to create a list item in sharepoint online 2013?
I have limited experience with the online version of sp. I've been asked if it's possible for a 3rd party app that our company is beginning to use, to programmatically add items to a list. I don't have any details about the program yet,
but I've been told that a batch would run at night and they would like it to create items in a SP list and pass along several fields of metadata.
Is this possible in the online version? I know that Power Shell can do this, but is it possible for an app to get access to run a PS command?
thanks,Yes.
There is something known as the Client Side (?) Object Model or CSOM. This allows you to create list items, lists and even sites with .Net code from a non server machine.
You could run 'classic' Server Object Model C#/VB.NET or PowerShell to do the same job and it might be easier as there's alot more material out there on how to do it. On the other hand it's probably going to make your solution more complicated and
harder to maintain over the long run.
This article introduces you to the CSOM and how to use it and is applicable to O365 as well as on-premise:
http://msdn.microsoft.com/en-us/library/office/fp179912%28v=office.15%29.aspx
As an alternative you can look at the REST API which allows you to use web services to interact with SharePoint.
http://msdn.microsoft.com/en-us/library/office/fp179912%28v=office.15%29.aspx -
Using 3rd party library on linux (ABI Compatibility ?)
Hi all !
I am facing a problem while developing an application that uses a 3rd party library. This 3rd party library is an OCR Engine.
Actually I am able to use this OCR from Java via JNI under windows. Now I try to do the same thing under Linux.
I created a C++ wrapper shared library linking the OCR Engine shared library.
I wrote 3 JNI functions for :
- loading the engine
- closing the engine
- setting the engine language support
Using my wrapper from any C/C++ program works fine. But when I use a JNI interface to these method, it ends randomly with a segmentation fault.
Consider this simple program :
engine.nativeLoadEngine();
for(int i = 0; i < 500; i++)
bq. engine.nativeSetTextLanguage( "French" );
engine.nativeCloseEngine();
Sometimes the segmentation fault appears before the nativeLoadEngine(), sometimes after nativeCloseEngine(), sometimes at iteration N etc.
It cannot be a matter of my JNI code because... take a look at my functions bodies :
* Class: com_XXX_ocr_OCREngine
* Method: initEngine
* Signature: ()V
JNIEXPORT void JNICALL Java_com_XXX_ocr_OCREngine_initEngine( JNIEnv* env, jobject thisObj )
* Class: com_XXX_ocr_OCREngine
* Method: closeEngine
* Signature: ()V
JNIEXPORT void JNICALL Java_com_XXX_ocr_OCREngine_closeEngine( JNIEnv* env, jobject thisObj )
* Class: com_XXX_ocr_OCREngine
* Method: setTextLanguage
* Signature: (Ljava/lang/String;)V
JNIEXPORT void JNICALL
Java_com_XXX_ocr_OCREngine_setTextLanguage( JNIEnv* env, jobject thisObj, jstring textLang )
Even if I do "nothing" in the bodies, I face segmentation faults. If I don't link the OCR library, it is self-evident that there is no problem.
I even used JNA (https://jna.dev.java.net/) to access a shared library exposing my three functions and linking to my 3rd party .so. I reproduced the same issue.
Config :
Ubuntu 2.6.20-16
gcc 4.1.2
libstc++6
jdk1.5.0_11
My wrapper and OCR Engine are both linking to :
libc.so.6
libstdc++.so.6
My libjvm.so is linking to :
libc.so.6
I tried both g++ and gcc to compile my wrapper.
Am I facing a kind of ABI compatibility issue between libjvm.so and my OCR engine 3rd party library ?
I tried some compile command tweaking but it was pointless. It really seems hopeless to me...
Thanks for any help.I believe I built Boost using the complete option. I have several files for each library, for example, I have the following in the boost_1_47_0\stage\lib\ folder:
libboost_regex-vc100-mt-1_47.lib
libboost_regex-vc100-mt-gd-1_47.lib
libboost_regex-vc100-mt-s-1_47.lib
libboost_regex-vc100-mt-sgd-1_47.lib
libboost_regex-vc100-s-1_47.lib
libboost_regex-vc100-sgd-1_47,lib
boost_regex-vc100-mt-1_47.dll
boost_regex-vc100-mt-1_47.lib
boost_regex-vc100-mt-gd-1_47.dll
boost_regex-vc100-mt-gd-1_47.dll
I think the ones that have the -s- in the filename are the static versions of the library.
I've tried changing the Project Properties->C/C++->Code Generation->Runtime Library settings without luck. And I'm not sure if there are other settings that I need to change. -
Outlook 2007 - Outgoing mail server from a 3rd party
I tried to set up the outgoing mail server for my Outlook 2007 with a 3rd party mail server. e.g. mail.xxxx.com, and I could not send the e-mail at all. If I set up the outgoing mail server as outgoing.verizon.net, I can send the email to everyone else but not to this 3rd party mail server mail.xxxx.com. I received the undeliverable message from Verizon that the mail was rejected due to not being able to log on to this 3r party mail server. I am working for this company from home and it requires me to set up this for my outgoing mail server. Does anyone know how to fix this, including specifying what needs to be done at the 3rd party mail server to change to accept emails sent from outgoing.verizon.net? Thank you in advance. Andy
Port 25 is the standard for SMTP, although some now use a submission port, 587. I know port 25 off network is blocked for residential users, I don't know if 587 is blocked off network because I have never tried it. I suspect it is. Verizon is by no means the only ISP to do this.
Business accounts do not have blocked ports as far as I know, so if you have a business account, you are free to communicate using port 25 anywhere.
Verizon has recently gone to non-standard port assignments for SMTP and POP servers. see
http://www22.verizon.com/ResidentialHelp/FiOSInternet/Email/Setup+And+Use/QuestionsOne/124289.htm?CM... -
Install 3rd party PDF iFilter for index PDF file as attachment in e-mail (msg)
I have called Microsoft Permium Support, base on the reply, SharePoint 2013 does not support to index a PDF file attachment in E-mail (msg) except 3rd party iFilter installed. And they finally told me how to edit Windows Registry for install the Adobe iFilter.
But, the Adobe iFilter is too weak to call large PDF files. So, I would like to install and try the Foxit PDF iFilter, but I cannot find an installation guide for this 3rd party ifilter with SharePoint 2013.
Does anyone here have the experience for Foxit PDF iFilter with SharePoint 2013 can help me?
I am not sure it is bug or feature in SharePoint 2013, but in case I still have to install 3rd party iFilter for index PDF file. I have no idea what is the out of box pdf file indexing support for.You ca plan to use Foxit.
steps are nearly the same which we use in sharepoint 2013
1. We need to update registry for pdf . Registry value is {987f8d1a-26e6-4554-b007-6b20e2680632}
2. we need to install the foxit ifilter
Here are steps for same
http://support.microsoft.com/kb/2293357
3. run below command:
net stop spsearch4
net start spsearch4
net stop osearch14
net start osearch14
Check below:
http://bjarnegram.wordpress.com/2011/07/13/installing-foxit-pdf-ifilter-on-sharepoint-server-2010/
Maybe you are looking for
-
K7N2 Delta ILSR memory problem
I have a K7N2 Delta ILSR board with Athlon XP 2500 with 2 Gig of Mushkin Black Line ram (the ones that are suppose to be CL2). I change the FSB to 200, and my memory won't run at CL2. Want to raise the Dram voltage to 2.8V to see if it would make a d
-
HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7
I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit. Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install. I have tried all the solutions provided on the HP website but no
-
I'm running Mac OS X 10.5.8. How do I upgrade to OS X Mountain Lion??? Help please!
-
Difficulty in using XML as source
Hi, I am finding it extremely difficult to work with Sunopsis when I am using XML as one of the data store. Even though I have defined new Physical and Logical schema's its not working for me. While defining Physical schema, name for work schema and
-
HT1725 i rented a movie and it is in downloads but status is "waiting" --?
i rented a movie but it is sitting in downloads, not downloading - status is "waiting" - what can i do?