Net price in Info record

Dear All,
I enter Net price when i create the Info record.
When i want to display that info record,the given net price is not there and found to be zero.
What is the reason?
How do i get the price there?
Regards

Hi,
If you have not maintained valid conditions in your Pur info record then price is picked from last purchase order through purchase order price history if customizing settings allow so (In your case if customizing settings allow and the net price 100 in the info record is not from valid conditions, price picked will be 250).
In the price determination process in PO system always first looks for pur info records with valid conditions if not found then it looks for last PO price.
There is also a parameter for default values for buyers called EVO. If you make settings in customizing for this parameter and tick the Chkbox for picking the last purchase order price in it and you attach this parameter to your user ID in the user-own data with PI value, then last PO price is picked as default value in the net price.
You can refer the following link
http://help.sap.com/erp2005_ehp_04/helpdata/EN/75/ee130655c811d189900000e8322d00/frameset.htm
Regards,
Prithviraj

Similar Messages

  • Net Price of Info record appearing in table EINE for Invalid dates

    Dear Expert
    Net Price ( Purchasing data view ) for Info record should be zero if Info record  is not having valid price ( not within Validity dates) but still its appearing in Table EINE,please advice why this is happening ?how to resolve this problem

    Hi,
    Please check the OSS note 369511. You need to run program RM06INPO AFTER the validity has become active.
    BR,
    Patil

  • PO Price from Info Record

    Hi Experts,
    We want that in one order type of purchase order PO should be made from Info Record Price. Suppose info record price is Rs 5. Nobody should be able to make po in price 4.90 or 5.10.
    Please help me to achive the same.
    Regards
    GR

    Hi,
    Check the setting :
    Spro-MM-Purchasing - Purchase order- DEfine screen layout at document level. Here you select the required field selection like NBF and double click on the items and make price in display mode so that in PO net price can not be changed at item level.
    Select the condition type PB00 ( price from info record) and(  path :: spro-conditions - price determination process - define condition type ) and go to Changes which can be made tab and select Manual entries and set " D" Not possible to process manually. Here at the condition level, price can not be altered.
    Check it out.
    REgards
    Ram

  • Purchase Order is not Picking Price from Info Record.

    Dear All,
                                                                             User had created a Shopping cart in and an automatic Purchase Order is created which is picking the material price from Purchase Requisition but not from Created Inforecord. As checked in P.R at item level it is found that in VALUATION tab there is a field named as " P.O PRICE " , here defalt t selected as " 1 A Gross Price "., Can u please help that from where this field is automatically selected as Gross Price in Purchase requisition.
    Thanx n Rgds,
    sap11

    This is the config done in the OMET transaction where you will see the Adopt PO price field is checked and now this funcitonal authorization code e.g. 01 assgined to user profile in SU3 transaction agianst the parameter EFB.
    if this is active than it will not take price from info record but it will copy from PR.
    to avoid this kind of issue -
    Remove the EFB value in SU3 for particular user or if user needs to have the EFB profile for some other requirements than go to OMET and remove Adopt po price indicator from that profile which is assigned to user

  • Price in Info Record

    Hi
    I would need to enter Gross Price in info record using three decimals. As it is now I'm only able to use two. Where can I change this?
    / Henrik

    You can do it in T.code: OY04.
    Price with additional decimals
    You can add additional decimals for a currency through a work around method.
    Set up a currency let's say instead of USD call it US$ ( OY03 ) and define the number of decimal places ( OY04 ) to be 3 or more depending on your requirement.
    Maintain the exchange rate for between US$ and USD to be 1 to 1 ( OBBS and OB08 ).
    Create pricing condition records for those customers requiring 3 decimal places using Current US$ instead of USD.
    That will give you 3 decimal places for your prices. However, one thing you will have to watch out for is rounding.
    You can try transaction OB90, define rounding rule for currency. Here you define the rounding rule for your customer's currency.
    Regards
    AK

  • Mass check scale price of info record

    Hi there:
    Is there any transaction or table to mass check scale price of info record?

    Any updates?

  • Deactivate default PO price from Info Record

    Dear all,
    Would someone enlighten me how to deactivate PO price from Info Record.
    PO condition is setup as not control at plant level.
    Regards,
    Peck Har

    Hi
    use
    MEMASSIN - Mass Maintenance
    here u can delete info record also
    Vishal...

  • PO not picking up the Price from Info Record ???

    Hi,
    Pricing Procedure and the Schema Grp is defined in Schema Determination in SPRO.
    Schema Grp has been assigned in the Vendor Master.
    Price has been maintained in the PB00 condition type in the Condition Supplements screen, but shows 'Zero' in the 'Purchasing Org. Data 1' screen of Info Record.
    However, while creating PO the system does not pick up the Price from the Info Record and both the Condition Types PB00 and PBXX appears and display the Amount as 0.00 ? Also the system does not take the value entered in the 'Net Price' field and the Price can only be entered manually in the Conditon Type in the Conditions Tab ?
    Can anyone help in resolving this issue ?
    Lucky.

    Hi Lucky
    1.Routine 6
    This is an example of a pricing requirement.  This requirement is met if the condition exclusion indicator is not equal to 'X'.  <b>This requirement can be assigned to a condition type in the pricing procedure to ensure that it is not accessed when a condition record with exclusion indicator 'X' has already been found</b>.  Condition exclusion is a general tool that can be used to exclude conditions from pricing based on previous conditions that have been found in the pricing procedure.  This requirement is intended for use in MM pricing versus SD pricing.  For SD pricing, a variation of requirement '2' should be used which would also check to see if the item category is relevant for pricing
    2. You have define all your supplementory condition in supplementory pricing procedure and you have to assign this supplementory procedure to your Condition type PB00.Then all these conditions will be displayed at item level for selection in drop down.
    Since the supplementory conditions are dependent on PB00, you have assign to the PB00.
    If you maintain the values for these conditions in info record, these values will be copied from info to PO.
    Regards
    Ramakrishna

  • CK11N User exit for valuation strategy sequence Price Purchase info records

    Hi,
    When ck11n is executed for a particular material whose purchase order is created then only price from purchase info records is considered. As the sub strategy selected is purchase order price via condition table.
    Requirement: CK11N should consider purchase info record even if there is no purchase order against that material. As the check of valid  agreement is done outside SAP.
    Can anyone sugest a solution ? eg any user exit
    BR,
    Ameya

    Hi
    I lost my notes on this somewhere.... Just to refresh my memory - Can you tell me whats the difference between Net Quotation price, Gross quot Price, eff price from Quotation and Quot price via cond table
    I compiled it actually, but lost it somewhere
    br, Ajay M

  • Price in INFO Record should be mondatory

    HI ALL,
    The Price in the Info record is allowing to Put 0.00 price also.
    We want to make price mandatory to take Price value greater than 0.00 Price.
    Please suugest any setting available to make this price other than zero with mandatory case.
    Regards,
    Nagaraj S

    Hi,
    go to SPRO --> MM --> puchasing --> purchasing info record --> Define screen layout -->  choose ME11 and click on details. double click conditions tab and make the net price as mandatory field by choosing check box.
    when you maintain info record system makes this field as mandatory in purchasing org 1 view( hope your issue wil be resolved with this)
    but still user can make the value as zero in conditions tab.
    Regards,
    Girish

  • PO retrieve old price from info record

    Hi Experts,
    I have maintain 2 pricing condition in info record with different validity date.
    Why PO still retrieve price which is validity date was expire instead of the valid pricing?
    Thank you.

    Hi,
    Yes. Normally the price will be picked from inforecord if it exits with conditions with valid date, otherwise the price will be picked from the Last PO .
    regards,
    abi

  • CK11n Costing Run does not pull purchasing price from info record.

    Hi,
    I have material which is a semi finished product (Material type: SEMI) and is purchased from a fixed vendor (specified in the source list).
    The costing run does not pick up the purchasing price from the purchasing info record but
    instead incorrectly picks up the standard price from the material master (Costing 2 view).
    Can you please help me solve this issue?
    Thanks,
    Ketan

    Execute OPL1
    or
    SPRo>>IMG>>Controlling>>Product Cost Controlling>>Cost Object Controlling>>Product Cost by Order>>manufacturing Order>>Check Costing Variants for Manufacturing Orders (PP)
    Select the costing variant in the table from "Change Costing Variant: Overview" Overview Screen
    Click Detail Button
    Click Valuation Variant Button in the Control Tab
    Change View Valaution Variant Detail Screen Appears
    In Material Valuation Tab Set Price from Purchase Inforecord as Priority 1 if you want to use Price from Purchase Inforecord for semi-finished product during CK11N
    You can list down Priority 2 to 5 depending on your requirement
    This would solve your problem
    Edited by: Paul Pandian on Mar 17, 2009 3:01 AM

  • Bring to the PR the price from Info-Record

    Hello experts,
    If I am working with info-records that are created automatically when doing the PO with the price of last PO, I would like to bring this price to the PR when doing for the same material and vendor. Is it possible? I only get the price from the info-record in the PO but not in the PR.
    Thanks in advance,
    Best regards,

    Hi,
    PLease read the SAP note 311174:
    Symptom
    You create a purchase requisition and go onto the initial screen of
    source determination. Although the system determines a source of supply,
    no data is copied from the source of supply. In particular the price is
    not used from the outline agreement or the info record. For purchase
    requisitions with account assignment the account assignment is also not
    copied from the outline agreement.
    The same applies for Transaction 'Create Purchase order' (ME25) with
    unknown vendor.
    Cause and prerequisites
    The transfer of data from the source of supply is not planned and only
    makes sense in some cases. In particular when you change the source of
    supply later the copied data must be changed again. However, at this
    time it is no longer clear whether the data was copied from the source
    of supply or was entered manually.
    Solution
    Currently and in the near future there will be no solution.
    Best Regards,
    Arminda Jack

  • Lock po price via info record.

    when buyer creating po, the price will give a default value which generate from info record. but buyer can change the price. can i lock the price input?

    Hi
    You go to M/06.
    Select PB00 and go to details.
    In the control data, you have subscreen "changes which can be made"
    there 'Manual entries' field is there.
    You can have your control as per requirement.
    regards
    Prasad

  • Price from Info record

    Hi
    I maintained the vendor/material info record but when I created the PO the material price is not populated from info record? your advice please.

    hi,
    You can check price for material or condition PB00 in me12/me13
    Also to get price from Inforecord you need to do some setting in Condition Type
    Goto V/06, select condition type and in Changes can be made area, in manual entries tab select
    B     Automatic entry has priority
    OR
    D     Not possible to process manually
    Regards
    Vishal

Maybe you are looking for