Net_rim_bb​_appworld is currently in use
Some time ago I tried to install bb app world to my BB8900. The installation failed because I don't have data connection purchased and WiFi doesn't work with this app onmy phone. I just tried to delete it from my BB8900 and I got the warning: "net_rim_bb_appworld is currently in use. Are you sure you want to delete it?" I'm sure I'm not using it right now, even more - it can't be used because of the limitations implemented by RIM. What's going on? Is my BB8900 using some modules from this app and it can be safely removed or there is something that I'm not aware about?
Check the below location. If it's installed in your device then it must be listed there. Options -> Advanced Options -> Applications -> BlackBerry App World.
If It's listed there then highlight BlackBerry App World and click Menu -> Delete.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit
Similar Messages
-
Is there a way to LIST OUT all of the active images that are currently being used on a page in Dreamweaver? Or do I have to click each one and write down the image name by hand?
Thanks!
LJAlternatively use a browser:
Use the Firefox Web Developer Toolbar
https://addons.mozilla.org/en-US/firefox/addon/60
Images > View Image Information
or the List All Images Add On for Firefox
https://addons.mozilla.org/en-US/firefox/addon/3688
or the Web Developer tools in IE8 (or earlier), F12 > Image > View Image Report -
question: Trying to install Adobe Premiere elements 12. When it gets to "Installing required Shared Technologies" stage it gives errror "Setup has detected that Adobe Bridge CS5 (Bridge.exe) is currently in use. Please close all running exe(s). Nothing is running when trying to install this, have been through this process several times. Found undertroubleshooting to delete files PDAppFlex.swf and PDAppFlex-app.xml and have done that as well. Any help will be greatly appreciated
Try Error "Installation cannot continue until... Adobe Bridge is closed" | Installation | CS5
-
I have I-phone 5 with 15 GB. I currently have used 12.8 GB. I get error message that storage is almost full, I go to setting and my mail is using 5.7 GB. Can that be how alot of my storage is being used? If so or not any advise?
caek1 wrote:
Hi,
I'm trying to change email address on my Apple ID since the email registered for the account has been hacked and I can't access it anymore. The email I want to change to is connected to another Apple ID I created about 4 years ago, though I successfully changed the email on that account as well. So the email I would like to use for my main Apple ID shouldn't be "locked" anymore.
Though, when trying to change the email on my Apple ID I get an error message (in Swedish, so this is a direct translate from google): "This e-mail address is your email address for notification. It can not be used as the Apple ID or primary email. Choose a different address."
I'm not really sure what this means or how I can fix this.
It means exactly what it says... The email Address is in Use. You cannot re-use it.
Apple ID Support > http://www.apple.com/support/appleid/ -
I want to be alerted when pdf is currently in use by another user?
I want to be alerted when pdf is currently in use by another user?
Currently in acrobat 10 it allows you to open a pdf that is in use. I would like to know how turn the alert on.
-
I've downloaded iTunes 12.0.1.26 3 times after the update and it still doesn't work! Every time i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use iTunes!!!!!!
Hey High Socks,
Thanks for the question. If I understand correctly, iTunes isn't working when you try to launch it. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario -
Can't locate the wallpaper on my phone that is currently being used.
I can't locate the wallpaper/background photo on my phone that is currently being used.
, GZ one CommandoShould be, yes. Its not in gallery or wallpaper settings. It was a photo taken off the original phone, that one was replaced, when the current one arrived the photo was preset as wallpaper on it and can't find it anywhere. I am in the middle of an upgrade, but don't want to lose the photo, me and my son prior to his deployment to Afghanistan.
-
"Some files that need to be updadted are currently in use."
I have Windows Vista, and iTunes has not been working on my computer for a few months now. I was hoping this new version (7.4 the latest one) would finally be able to run. Unfortunately, when I run the installer, I get a window that says this:
"Some files that need to be updated are currently in use."
"The following applications are using files that need to be updated by the installer. Close these applications and click Retry to continue"
"Windows Explorer (Process ID: 2440)"
How should I deal with this? And what if I still get the "iTunes has stopped working" message if I do manage to install it? Thanks for trying to help!Sorry to bump up an old thred.
I too ran into the same error. It was the vagueness of the error message which surprised me.
What I used Unlocker [http://ccollomb.free.fr/unlocker/] on the folder "C:\Program Files\Adobe\Reader 9.0", it showed some 6 to 7 files in use by the Windows Search Indexer.
I unlocked all the files and was able to update Adobe Reader. -
TC: The Internet connection is currently in use by another computer...
So, I have a TC connected to a Netopia ADSL modem from Earthlink. Ocassionally, when the computer has left the wireless network, I will come home to find the following page with the Earthlink logo at the top:
“The Internet connection is currently in use by another computer
( 172.16.1.10 ).
Enter your DSL Account logon password to switch the Internet
connection to this computer.”
If I enter the password and click "Obtain Connection", I am taken to another page that says that I can now access the Internet, blah blah blah... and another button that says "Release Connection".
First of all, it does not seem like that should be happnening, but no big deal as it takes 5 seconds out of my day to work around. The bigger problem is that only one computer can be connected to the Internet at a time. If a friend with another laptop comes over and tries to access the Internet at the same time as me, he will get the same Earthlink page popping up. If he enters the password, he will kick off the first computer and on and on and on...
I called Elink support and they, of course, told me it is a TC issue. I called Apple and they, of course, told me it is an ISP issue. I suspect that it has something to do with my TC settings (bridge mode, maybe?), but have no idea what I am doing there.
Anyone have any ideas for me? I have friends coming into town this weekend and we won't be able to share stupid YouTube clips as efficiently with only one computer!There is nothing you can do.. if you want more than one device connected then you must double NAT. This is common practice with Satellite providers.. I am not sure why they cannot afford to buy a block of public IP.. maybe it is deliberate to prevent people using servers.
Just select ignore in the airport utility.. for the double NAT problem.. this is the equivalent to sticking your head in the ground and therefore your problems don't exist. (your opponents cannot see you if you have a bird brain!!) Of course when the opportunity comes up.. move. Go to fibre or 3g/4g with a reliable ISP who hands out public IP. Until then tighten your belt.. short commons are the order of the day. -
I have no other applications open, when I try to update with 9.2.0, but I receive subject error message. Task Manager shows NO Image Name called "Program Manager". There is nothing else running, that is obvious to shut down. Any suggestions, Please?
rickHave these posted suggestions worked for anyone? I have been using the same installation files on several different machines. Most machines upgrade just fine but, I have a few that receive this error and I cannot seem to get past it: "Some files that need to be updated are currently in use" "Program Manager" is the program that the installer is complaining about. Does anyone know what program "Program Manager" is? I'm assuming it is an Adobe file but, why would it interfere with one of my installations and not all of them?
I'm using the same installation files for all installs so, I don't believe that it could be my downloaded installation setup files.
Thanks so much in advance for your assistance -- -
How to know which graphics card is currently in use? (2010 MBP)
Is there a way to check which graphics card is currently in use? I have the new 2010 15" 2.66 ghz MBP.
gfxcardstatus - http://codykrieger.com/gfxCardStatus/
-
How to get current row using submit button ?
Hello Friends ,
Is there any way i can capture the value of current row by submit button ?
Here is my requirement , i have seeded OAF screen and it has table region one of the column has radio button , the existing
functionality is when ever the radio button is selected and click on submit button ( submit button attached on top of the table region )
other oaf page is getting opened .
Now i wish to restrict the navigation based on some condition , but i don't know how to get the current row using submit button .
Note : there is no Fire Action event for radio button column ? I dont' know how orale is selecting a specific row
Any suggestion please ?
Regards ,
VamsiThanks sushant for your response ,
Well i have tried your approch , i am not getting values for current row .
if (pageContext.getParameter("paApply") != null)
OAApplicationModule am = pageContext.getApplicationModule(webBean);
OAViewObject localOAViewObject1 = (OAViewObject)am.findViewObject("ProjectDatesVO");
if(localOAViewObject1!=null) {
Row DateVoROw = localOAViewObject1.first();
RowSetIterator iterator = localOAViewObject1.createRowSetIterator("iterator");
iterator.setRangeStart(0);
iterator.setRangeSize(localOAViewObject1.getRowCount());
for(int i=0; i<iterator.getRowCount(); i++)
DateVoROw=iterator.getRowAtRangeIndex(i);
String vacancyValue= DateVoROw .getAttribute("vacancyname).toString();
Could you please let me know where i am going wrong
Thanks again ,
Vamsi -
Attempting to install Flash plugin 11.4 but getting error: application currently in use
I try to get a support in the Adobe forum. While I am waiting for any responses, I might as well look for the same here. Maybe someone have an idea.
Last night, my Firefox 16.0.2 prompted sites like Youtube to upgrade my Flash Player. First attempt at installation was successful (if I remember it), but somehow Firefox slowed down at confirmation. So, I try to uninstall and reinstall Flash Player. Yes, I did complete uninstallation. Any subsequent attempts led to error: application currently in use.
Earlier today, I resetted my Firefox browser. First attempt at another installation was successful, but the browser seemed to hang or slow down for a while until the Flash confirmation page showed up. I thought for sometime, everything went fine. It did not when I was having trouble watching flash player content from a site. I figured I better uninstall and reinstall it again. Here I go again with the error message like the above.
Any idea what I should do next or how should fix this? Any input is appreciated. I'm using Windows 7Please restart you computer after the uninstall then try installing again.
Thanks! -
Can I recover the database to the current time using a backup control file?
Can I recover the database to the current time using a backup control file? How far can I recover this database?
I have an Oracle 10g(10.2.3) database on RHEL4.3 system.
I have lost all the current control files and all the online redo logs, archived redo logs and all other files are OK.
Now I have to recovery this database using a backup control file.
Can I recover the database without any data lost?If
a) it was a Shutdown Abort or an Instance Crash (i.e. backgrounds died on detecting loss of redo logs),
b) redo logs are lost
c) data files are intact
You'd have to
a) Restore datafiles
b) Do an Incomplete Recovery to the last available ArchiveLog
Hemant K Chitale
http://hemantoracledba.blogspot.com -
Get Parent Community from Current Comm using the G6 PRC
Can anyone provide or point me to a sample of code that gets the Parent Community ID from the current community using the G6 PRC? I can find samples of doing this in this discussion, but they appear to reference older versions of the EDK. Ideally, given the current community ID, I would like to walk backwards through the hierarchy until I find the root community (the community with no parent ID).
Thanks in advance,JeffHave you thought about using pt:standard.tree instead of rolling your own?
Chris Bucchere | bdg | [email protected] | www.bdg-online.com
Maybe you are looking for
-
Upgrade to Leopard = No Wireless Networking
Hi, I upgraded my Mac Mini (1.83 GHz Core 2 Duo) to Leopard the other day. Took it to 10.5.2 right after the upgrade. Everything worked flawlessly for about 2 days. Then the AirPort networking started dropping it's connection. I have a Wireless Route
-
Explicity mapping between ActionScript and Java objects for the BlazeDS Messaging Service
The BlazeDS documentation shows how to explicitly map between ActionScript and Java objects. For example, this works fine for RPC services, e.g. import flash.utils.IExternalizable; import flash.utils.IDataInput; import flash.utils.IDataOutput; [Binda
-
My ipad disable permanently due to repeated wrong passcord. how to unlock it
can anyone help me to unlock my i pad. it was permanantly disable due to repeated passcord entered
-
Can't import audio from clip into Premiere Pro CC.
I can export a clip, with audio, from Premiere Pro, but when I import it back into PP the audio track is missing. I noticed that when I delete the .xmp file from the file folder the audio will import with the clip successfully. Can someone please i
-
How to handle empty PDF document when using Sections
I have below XML structure <?xml version="1.0" encoding="UTF-8"?> <DATA> <LIST_INVOICES> <INVOICES> <INVOICE_NUMBER>30363</INVOICE_NUMBER> <INVOICE_DATE>2009-02-24T00:00:00.000-05:00</INVOICE_DATE> <INVOICE_COMMENTS/> <LIST_HEADERINFO> <HEADERINFO> <