Net Value in sales order item

Hi All,
Any one know how the system set net value in sales order item? (VBAP-NETWR)
I mean, what kind of condition type will be considered in net value calculation.
Thank you

Hi,
In Sales Order net value (NETWR) is always value before tax, it means the condition type determined before tax condition will be considered in sales order Net Value.
In other words if conditon type have a category defined as D-Tax and Cond. class as D- Taxes, the value of this condition type will not be considered in Net value.
regards
Vivek.
Edited by: Vievk Vardhan on Jan 7, 2010 2:00 PM

Similar Messages

Net Value in Sales order item and header URGENT

Hi experts
In some sales orders the net value is not shown but it is available in PR00 condition.
Where should i check pricing proceedure or copy control,
In the same sales order type i.e ZRP other sales orders are having net value,
this sales order is created with reference to sales order type RE.
Pls guide where to check and what correction needs to be done.
Thank u in advance.
regards
SM

Hi,
Pricing procedure in tcode V/08, check the field 'SubTo'.
Copy control in tcodes VTFA (between SO and invoices).Check the field 'pricing type' for conditions.
I hope this help you,
Regards,
Eduardo

How can i take Basic price value as Net value in sales order

Hello SD experts,
I have constructed a pricing procedure, and in that have taken condition type for basic price as rate (cond. type= Price) and have another 3 condition types as surcharges for some internal calculation (but i have to show them in pricing procedure).
Net value in order is showing a total of all condition types (basic price condition type+ all 3 surcharges condition type's value)
for ex;
ZRAT ---Basic Price
ZMRP-- Mrp/pcs rs.
ZDOZ--- Mrp/Doz Rs.
ZTAV--- Total Value Rs.
in this case, when order creates in pricing net value amount shows total of all condition types above and as..
Now in this case i have to show only Basic price condition value as Net value in the order....
i am just confused with the subtotal, requirement and calculation form for condition base....(do i need to go for a new routine creation?)
Could you please help me out and please guide me, what should i do for above situation....
Any help would be a great....
Thank you

Dear G. Mallikarjun ,
Put A in the subtotal field against the Price condition type and check.
If the other condition types (discounts) are for internal calculations, please do as advised by Lakshmipathi.
check and revert back.
Thanks & Regards,
Hegal Charles

Net value of Sales order Zero - delete line item

Hi,
Sales Order is raised for 3 materials.
Line item 10 --> 1 Qty --> Quantity delivered -->1
Line item 20 --> 1 Qty --> Quantity delivered -->1
Line item 30 --> 1 Qty --> Quantity delivered -->0
Line item 10 and 20 have some price but as a result of R100(100% discount) their net value is zero.
Line item 30 has some price, lets say Rs. 100
The requirement: Line item 30 needs to be deleted.
When I delete line item 30 and attempt to save the order, it takes me to incompletion log.
Where it displays line item 10 Missing Data Net Value
Where it displays line item 20 Missing Data Net Value
What are the possible solutions?
Happy Diwali in advance.
thanks,

I think I need divine intervention on this.
1.I applied OSS NOTE 106567 and ran the report SDVBUV00 but it didnot solve my problem. Raised this issue in OSS also, but no solution.
2.I changed the incompletion log for my sales doc at item level... I changed VBAP-NETWR as warning but still I could not solve it.
3. Assigning "reason for rejection" at item level, does not solve the purpose and it invokes the incompletion log
Any other options.
Just a quick recap on the nature of problem.
"+ Sales Order is raised for 3 materials.
Line item 10 --> 1 Qty --> Quantity delivered -->1
Line item 20 --> 1 Qty --> Quantity delivered -->1
Line item 30 --> 1 Qty --> Quantity delivered -->0
Line item 10 and 20 have some price but as a result of R100(100% discount) their net value is zero.
Line item 30 has some price, lets say Rs. 100
The requirement: Line item 30 needs to be deleted.
When I delete line item 30 and attempt to save the order, it takes me to incompletion log.
Where it displays line item 10 Missing Data Net Value
Where it displays line item 20 Missing Data Net Value" +

Net Value in Sales Order line item

Dear Experts,
Need a small favour.
I need to know, how net value & tax is populated in SO line item.
I have condition where
Net Sales-Fix = 5.00 AUD
Net Sales-Trading = 8.00 AUD
Net Sales = 5.00 AUD (calculated as per routine for alternative cal type, which is taking lesser value of Fix & Trading).
Sub-to - 3 (Carry over value to KOMP-KZWI3) is maintained for Net sales.
But "Net value" in line item is wrong. I want value for "Net sales" should be the net value.
Please suggest, what should I do??
Regards,
Praveen

Dear Customer,
the netvalue is the sum of all condtions which are non statistical and active.
(excluded taxes).
If the netvalue shoud be value for "Net sales" then 'Net sales' should be the only active
non statiscal condtion.
Otherwise also other conditions have an influence to the net value.
Please check all conditions in your document.
I hope that the information are helpful.
regards
Claudia

Condition type change quantity and net value at sales order

Hi Experts,
I wanted to only ALLOW sales order for RK type (invoice correction) condition ENABLED to change (qty + net values). However i wanted to DISABLED condition changes (qty+net values) in any others type of sales order.
i have maintained SD->Basic function->Pricing->Pricing control->define condition type->maintain condition type-(changes which can be made) in my current setting is
1) manual entry = C (manual entry is priority)
2)hdr condition = no check
3) item condition = check
4) delete = check
5) amount/percent = check
6) value = check
7) qty relation = check
8) Calc type = check
Thank you.
Regards,
Yong Kok Wah
material              qty                cat            value
1234                    2                 G2N           18.40
1234                    2                 L2N            18.40-
1) System will auto create with 2 item category, is it true?
2) How can i change the net value? Because the actual value suppose is 17.00
Thanks & Regards,
Yong Kok Wah

yes , that is standard functionality only.
One is for Credit and second is for Debit note.
If you want to change the price you can change it manually.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55fede545a11d1a7020000e829fd11/content.htm

Net Price/Net Value on Sales Order Overview Incorrect

Hi Experts!
We are on SAP 4.7
I have a sales order that has already been delivered, billed, etc. However, when I look in the Sales Order Overview screen, for 1 item, the Net Price is different than the Item Pricing Condition screen. I looked in document changes and did see when the Net Price was changed, but cannot tell why it was changed. Can you anyone explain why this happened? This is causing a minimum order surcharge in the order. Awaiting a quick response. Thank you in advance!
WC

Thank you for the response!
I have tried to replicate the scenario, that was causing the net price/net value displaying incorrectly, and thus causing a minimum order surcharge fee; which was really the issue.
When I re-created the scenario, I found that a change in quantity in the sales order of an item or items, after the delivery has already been created (before posting GI); it caused the net price/net value to change, thus causing the minimum order surcharge.
The person changed the quantity in sales order, and it indirectly changed the net price, causing the minimum order surcharge. I still do not know why this happened?
Do you know of any reasons why this may have occured?
Thank you in advance!
WC

FM SPE_CALCULATE_PRICE - Java Call does not return Net Value of Sales Order

Dear Experts,
we want to make a call of FM SPE_CALCULATE_PRICE from the SAP NetWeaver Developer Studio to achieve that we receive the Net Value of a Sales Order. When we try to test the Scenario in SAP CRM (Creation of a Sales Order) Itself all is working fine. But if we try to make the call from Developer Studio it does not work for some reason. We have applied SAP Note 1936255.
I am attaching:
- the Pricing Trace we receive as a result from SAP.
The Java Code we use is the following:
Code JAVA
import com.sap.mw.jco.*;
import com.sap.mw.jco.JCO.ParameterList;
import com.sap.mw.jco.JCO.Structure;
import com.sap.mw.jco.JCO.Table;
public class callIPCDemo {
public static void main(String[] args) {
System.out.println("--- START ---");
// connect to SAP system
JCO.Client client = null;
try {
client = JCO.createClient(
    "400", // SAP client
    "XXXX", // User ID
    "XXXXXXXX", // Password
    "EN", // Language
    "XXX.XXX.XX.XXX", // IP des hosts
    //"QPMR-CR20", // Hostname
          "00"); // System number
client.connect();
System.out.println("Connection OK\n");
catch (Exception ex) {
System.out.println(ex);
return;
// print RFC attributes
System.out.println(client.getAttributes());
// create JCo repository
JCO.Repository repository = new JCO.Repository("testIPCcall", client);
// Function Module SPE_CALCULATE_PRICE
IFunctionTemplate ft = repository.getFunctionTemplate("SPE_CALCULATE_PRICE");
JCO.Function function = null;
try {
function = ft.getFunction();
} catch (Exception ex) {
System.out.println(ex);
return;
// IS_HEADER_INPUT
ParameterList importParameterList = function.getImportParameterList();
Structure HeaderInput = importParameterList.getStructure("IS_HEADER_INPUT");
HeaderInput.setValue("005056A7005E1ED3A7AD22549B279B91", "DOCUMENT_ID");
HeaderInput.setValue("CRM", "APPLICATION");
HeaderInput.setValue("ZCRM02", "PRC_PROCEDURE_NAME");
HeaderInput.setValue("EUR", "DOCUMENT_CURRENCY_UNIT");
HeaderInput.setValue("EUR", "LOCAL_CURRENCY_UNIT");
HeaderInput.setValue("X", "PERFORM_TRACE");
// IS_HEADER_INPUT-ATTRIBUTES (substructure/table)
Table HeaderInputAttributes = HeaderInput.getTable("ATTRIBUTES");
HeaderInputAttributes.appendRows(3);
Table valuesTable = null;
HeaderInputAttributes.setRow(0);
HeaderInputAttributes.setValue("DIS_CHANNEL", "FIELDNAME");
valuesTable = HeaderInputAttributes.getTable("VALUES");
valuesTable.appendRows(1);
valuesTable.setValue("01", 0);
HeaderInputAttributes.setRow(1);
HeaderInputAttributes.setValue("SALES_ORG", "FIELDNAME");
valuesTable = HeaderInputAttributes.getTable("VALUES");
valuesTable.appendRows(1);
valuesTable.setValue("O 50000151", 0);
HeaderInputAttributes.setRow(2);
HeaderInputAttributes.setValue("SOLD_TO_PARTY", "FIELDNAME");
valuesTable = HeaderInputAttributes.getTable("VALUES");
valuesTable.appendRows(1);
valuesTable.setValue("005056A7005E1ED3A7ACEFCAD95FBB91", 0);
importParameterList.setValue(HeaderInput, "IS_HEADER_INPUT");
// IT_ITEM_MAIN_INPUT
String itemGuid = "005056A7005E1ED3A7AD3F004CD85B91";
ParameterList tableParameterList = function.getTableParameterList();
Table tableItems = tableParameterList.getTable("IT_ITEM_MAIN_INPUT");
tableItems.appendRows(1);
tableItems.setValue(itemGuid, "ITEM_ID");
tableItems.setValue("005056A7005E1EE39289A0FB457C9D8A", "PRODUCT_ID");
tableItems.setValue("M", "EXCH_RATE_TYPE");
tableItems.setValue("10", "QUANTITY");
tableItems.setValue("PC", "QUANTITY_UNIT");
// IT_ITEM_ATTRIB_INPUT
Table tableItemAttributes = tableParameterList.getTable("IT_ITEM_ATTRIB_INPUT");
tableItemAttributes.appendRows(2);
tableItemAttributes.setValue(itemGuid, "ITEM_ID");
tableItemAttributes.setValue("PRODUCT", "FIELDNAME");
tableItemAttributes.setValue("005056A7005E1EE39289A0FB457C9D8A", "FIELDVALUE");
tableItemAttributes.nextRow();
tableItemAttributes.setValue(itemGuid, "ITEM_ID");
tableItemAttributes.setValue("PRC_INDICATOR", "FIELDNAME");
tableItemAttributes.setValue("X", "FIELDVALUE");
// IT_ITEM_TIMESTMP_INPUT
Table tableTimestamps = tableParameterList.getTable("IT_ITEM_TIMESTMP_INPUT");
tableTimestamps.appendRows(3);
tableTimestamps.setValue(itemGuid, "ITEM_ID");
tableTimestamps.setValue("PRICE_DATE", "FIELDNAME");
tableTimestamps.setValue("20140225000000", "TIMESTAMP");
tableTimestamps.nextRow();
tableTimestamps.setValue(itemGuid, "ITEM_ID");
tableTimestamps.setValue("PRT_DELIVERYDATE", "FIELDNAME");
tableTimestamps.setValue("20140225000000", "TIMESTAMP");
tableTimestamps.nextRow();
tableTimestamps.setValue(itemGuid, "ITEM_ID");
tableTimestamps.setValue("PRT_ORDERDATE", "FIELDNAME");
tableTimestamps.setValue("20140225000000", "TIMESTAMP");
// execute function module
try {
client.execute(function);
} catch (Exception ex) {
System.out.println(ex);
return;
// check result
JCO.Structure structureHeaderResult = function.getExportParameterList().getStructure("ES_HEADER_RESULT");
System.out.println("Net Value: " +
    structureHeaderResult.getValue("NET_VALUE"));
JCO.Table tableHeaderResult = function.getExportParameterList().getTable("ET_TRACE");
System.out.println(tableHeaderResult.getNumRows());
for(int x = tableHeaderResult.getNumRows(); x <= tableHeaderResult.getNumRows(); x = x + 1) {
tableHeaderResult.setRow(x);
System.out.println("Trace: " + x + tableHeaderResult.getValue("ACCESS_TRACE_XML"));
// disconnect from SAP system
client.disconnect();
System.out.println("--- END ---");

Thanks.
I'll have to discuss VTAA pricing types with the Business Analyst, since there are many records and I'm not sure what I'm looking at.
In regards to your second point, it's not in calculation. It'll stay at that number until you save, check the conditions tab in the header or reprice the document.
What's interesting is that it doesn't do this for all materials.
For example:
Material 1 - priced $25
Material 2 - priced $25
Net price would be $50, which is correct.
But say we use Material 3 - priced $25 as well. For this one, the total net price could show up as $30.
Can pricing types be specific to materials or material groups? What is the pricing type exactly and why 'A'?

Net Value in sales order becomes zero after changing the employ responsible in Web UI

Hi All,
We are in CRM 7.0 with EHP1, when we change employ responsible in the sales order and save, Net value is becoming zeroes.
This is effecting most of the transactions. There is no custom development, every thing is standard.
Could any one suggest me this.
Thanks.
Best regards,
Hari

Hi Raj,
Thanks you for your reply.
Could you please let me know where I can see this combinations in configuration. Actually this is happening for standard transactions also.
I checked customer pricing proc for that BP and Document Pricing proc for that T type. They are maintained for the specific salea area.
Regards,
Hari

Net Value in Sales order is not picking up for manual conditions.

Dear Gurus,
I created a new pricing procedure for a sales document, where 2 manual conditions will given in sales order.
But after giving manual conditions, the system is only taking one condition value as net value.
I given Base value description and the step numbers of two manual conditions for Addition.
Please help me I want total of two manual conditions into Net value.

Hi Mahendar ,
Could you please share the solution if your issue has been resolved . Even we are facing the same issue . It would be of a great help
thanks and regards
Kish

Net value of sales order before saving in VA01

Hi there,
I'm currently working with the transaction VOFM whereby i need to get the <b>net value</b> of the current sales order in order to compare with a deposit value which the customer has made.
a condition type is activated whenever the net value is < the deposit which the customer makes,i.e when sy-subrc EQ 0.
My problem is that the routine in VOFM(where i have added my code),is triggered before i save the order, hence all i get as net value is always 0.00. That routine is again triggered after i save as well, but it doesnt work as i expected even if i get the net value then.
I have in fact used the routine USEREXIT_PRICING_PREPARE_TKOMP of include MV45AFZZ, where i could get the net value from the field XVBAK-NETWR <b>after saving the order</b>.
i thought that now it gets the right value, it'l work as expected but the fact that the VOFM routine is triggered before saving(hence net value 0.00), the condition type doesn't change after i save.
Hence, my condition type is not being applied properly because the condition type is being activated already when it get the net value 0.00.
Can anyone please tell me if there is a way to get the net value before saving?
Thanks for your help.
Regards,
Meenakshi

Hi,
I have in fact used export flag to memory in FORM USEREXIT_PRICING_PREPARE_TKOMP from which i get the net value after saving.
In fact, i have figured out the problem but still cannot solve it.
What happens i that the VOFM routine is triggered more than once, hoewever, the first time it is triggered, i still havent got that net value. In this pass, when the routine ends, sy-subrc eq 0. Upon the next pass to the VOFM routine, i set sy-subrc to 4(condition type not activated), however the result is wrong. The condition type is activated still.
if i do the contrary, i.e set sy-subrc to 4 on the first pass to VOFM routine and then set sy-subrc to 0 second time(condition type needs be activated), the condition type is not activated.
what i dont understand is why the VOFM routine is only keeping the initial value of sy-subrc?Any ideas?
Also, am doing my validations and setting sy-subrc in the form kobev_900.
Am not using the form kobed_900 at all. Does this make a difference?
Also, how can i do the validation only when repricing was called form SAVE process?How do i put the condition?
Thanks for the help.
Meenakshi

Default Batch value in sale Order items

Hello SD Experts,
Please, is there a way to recover a default value for the batch of all posts in a Sale Order (SO).
In fact I want to have a default value Z001 in the batch field of all post's of SO type ZS01.
is that possible? if so how the customiz it?
thank you in advance.
SDA

Hello,
You could consider creating a batch strategy (T-code VCH1) and use it to control the batch determination in sales order.
Hope it helps.
Regards,
Smile

NET VALUE IN SALES ORDER

Hi SD Guru's
I have a problem, my net value at the item level and the header level doesnt match up. Can you please advise what could be the problem?
Thanks
Ravi

hello, friend.
please clarify... the total amounts of all line items (net value) do not match up to the header amount?

Dynamic field value in Sales order item table control

Hi
I need to find the VBAP-VKAUS (Usage indicator) field value in run time of the creation of sale order ...these values stored in the table TVLV.
when i debug the program SAPMV45A in the screen 4900 this VBAP-VKAUS value gets empty in structure VBAP even though i can see other values like MATNR etc...
this field is configurable (dynamic) field and not appear for all the ordertypes.
i need to pass this VBAP-VKAUS value to KOMPD-VKAUS
Thru user-exit..so please let me know if somebody knows how to find this VBAP-VKAUS value.
Thanks in advance
Madi

hi,
Plz Check the struc KOMP/KOMK. Let me know, if this helped.
Rgds,
Raghu.

REASON OF REJECTION AT SALES ORDER ITEM LEVEL

In sales order item level after putting reason of rejection wether net value of sales order changed to ZERO Value?
In Sales infromation system for that particular customer & material sales order value reflects in report?
Kindly send your comments on it.
regards,
N.M.PAWAR

Hi
Suppose a sales order has 2 line items say material 1 and qty is five units and each is Rs 100 and material 2 and qty is Three unitsand each is Rs 100
Then the nett value of the sales order is Rs 800
If you reject material 2 and qty is Three units then after that whether order value changes to Rs 500 or remains at Rs 800 depends on your SPRO settings
In t code OVAG against your reason of rejection if you maintain blank in the statistical column system keeps the price as Rs 800 even after rejecting it the sales order but while billing it will be billed for Rs 500 only
If you maintain X/Y in the statistical column system changes the price as Rs 500 after assigning the reason of rejection and then enter
The difference between X and Y is
tomorrow if the top management wants a report that how much value loss has come thro reason of rejection such report is not available with X (if you maintain X) and with Y you can take such reports because X doesnt updates the information structures but Y does update information structures
Regards
Raja

Net Value in sales order item

Similar Messages

Maybe you are looking for