Net Value not updated

Hi,
I have created a pricing procedure with a few tax conditions but somehow while using this procedure in the Sales order I see that the net value of the order is not getting updated.
I am able to add value for the tax conditions but the net value isnt getting updated.
Please advise.

Net value = Total before taxes
So, when you add new tax conditions or change values in the tax condition record the Net value will not change but Tax values and the Invoice totals (Gross value) will change.
Hope this helps, if not, provide us more details in order to understand your problem better.
Thanks.

Similar Messages

Invoice correction request (net value not updating)

Hi guys,
I have a problem when creating an Invoice correction request (RK).
When I change the Target quantity in the item (L2N), the Net value is not updated. So I have to go to Conditions and Carry out new pricing.
Any idea to fix this.
Best regards,
Eduardo

Hi Eduardo
Check the copy control VTFA , what is the pricing type it is being used and what is the quantity field maintained -ve or +ve or kept blank .
Even Go to item data->conditions tab and click on analysis you will know the problem why it is not changing the gross price
Regards
Srinath

Line item net price not updated in overview screen net price&line item

Hi ,
We have down payment order with 10 line items
In orders with billing plan, the sales line item net price, if we entered manual condition price (ZPNP) ,gets updated in item condition net value. But it does not simultaneously gets updated at once in 1) Sales order overview screen net value 2) Billing plan header 3)Sales order overview screen line item condition net value. Updation at these three places happens only after clicked on header conditions.
However, in case of the last item in the sales order, the updation happens simultaneously in all the 3 places i.e. 1) item condition net value. 2) Sales order overview screen net value 3) Billing plan header 4) Sales order overview screen line item condition net value.
This is also true for the order with only single line item. We are faced a information popup message every time we change the item net price u201CItem 000100(100 is last line item number in sales order) exists already; the entry ignored u201C. This happens in case of all line items except the last line item. Also this does not happen in case where there is a single line item in order.
Our requirement: The moment the net price of an item is change manually, it should get updated at all the 4 places mentioned above like it does in case of the last line item.
Kindly help me to fix this problem.
Regards,
Adikesav

Hi,
Can u elaborate ur query ?
By this FM you cannot create a SO . Use FM --> BAPI_SALESORDER_CREATEFROMDAT2
Regards,
MAdhukar Shetty

Subcontracting challen po net value not come in challen

Hi
While I taking print of subcontracting challen po net value not come in challen
any reply
Regards
Kailas ugale
Edited by: Csaba Szommer on May 9, 2011 10:36 AM

Hi
check this link it may helpful to you
same question was put by me in forum some day ago
[net value not coming in subcontracting challen|subcontracting challen print;
Regards
Kailas ugale

Contract value not updated in open order value of credit management

My requirement is i have created the contract and activated the credit management by assigning credit group to contract document type, In item category the credit is active and in pricing subtotal is also assigned .
But when i create the contract , the open order value is not updated .
i do not want the credit to be active at order level.
Dear guru's
please let me know where i am going wrong
thanks in advance

hi,
open sales orders value not updating currectly in sales value of CM
http://wiki.sdn.sap.com/wiki/display/ERPLO/CreditmangementIn+SD-FI
i think you have to run a report which is under the link number 1.
regards,
balajia

Statistic condition values not updated during Sales order Settlement

Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
Thiru

Hi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh .

Subscription value not updated despite payment made days ago

Please help this is frustrating have been waiting for 3 days now payments have been made but subscription value not updated on skype account

Hello and welcome to the Skype Community.
You have totally different issues. ALWAYS start your own topic please.
1.0. Philippines Subscription.
Your account shows that you have used your full minutes allocation in your current billing cycle and your next minutes will be added to your account when your next billing cycle starts on July 17th 2015.
Renewing your monthly Subscription before your billing cycle ends has no effect on the date upon which your minutes allocation will be added to your account.
To continue calling until your next minutes allocation is applied to your account please purchase either a Subscription but with a different amount of minutes or Skype Credit.
2.0. Your account shows that you are calling a cellphone in Austria. Please note that only calls to landlines in Austria are included in the Unlimited World Subscription.

Net value not being updated from Pricing Element/Pricing condition

Hi All,
User confirm activity of 40 hours in CJ20n of Project System. When we are creating RRB(Resource Related Billing) request for billing of 40 hours using DP91, Net Value is coming Zero where as pricing condition for the item is upodating Basic Price from quantity of 40 hours.
Please adise, why Net Value field is not being updating.
Regards
Rajesh

hi monty,
first of all please check the validity and other criteria by which sytem populates the pricing records in to the sales order.
this can be easily done by refering to past "pricing" posts.
also
kindly check on the reference status whether this order is getting referenced and pricing values from a preceeding document like sales quotation,because if the conditions mentioned by you are not in the preceeding saes document then it will not get populated ,hence you have to update pricing by going on to the conditions tab,
update me so that other solutions can put to you
regards
Mohit Singh

Open sales orders value not updating currectly in sales value of CM

Hi SAP experts,
I have an issue some of customers credit exposure value showing worng value.We are using static credit limit check.
customers credit limit RM20000,
open sales order valueRM6,073.77
open delivery=0
open billing =0
open items(recievables)=3,464.39
Credit exposure =9,538.16.
But i have checked in VA05 its showing 13,001.10 value, i have checked all areas didnt get any solution.
I have run the reports RVKRED09 and RVKRED77 , RVKRED88 also no updates in the credit management.
is there any other areas i need to check, advise me.
Regards,
Nooka

The only thing you really need to check is RVKRED88.
It is not the correct procedure to compare the open sales order value with the sum net value of VA05.
In VA05 open documents are displayed indifferent whether they are already part-delivered or not. That's why the open values from the VA05 are not directly comparable with the values in RVKRED77.
As described in OSS note 716141; reports RVKRED88/77 shows the correct value which should be in your system.
If you need to know more let me know.
Thanks,
Gerard

ME31K Net Price not Update

Dear All,
In a service contract ME31K net price(ESLL- NETWR) of service not updated.its shown zero value in gray field on every time.
We are using standard procedure for service contract :MS0000".and also i have check PRS condition but it doesn't work.
I have also read many thought relelated to same issue but not getting proper answer.
Please help on priority basis.
Thanks & Regards,
Dishant Mistry

Dear Dishant,
Just a clarification, are you sure that you are talking about ESLL- NETWR, since usually we maintain price for service contracts in ESLL-TBTWR (Service level), so that automatically it calculates the net value for the respective service and updates in ESLL- NETWR.
Note: Once you maintain the value in ESLL-TBTWR, the program would some up all the service value for the item and displays in EKPO-NETPR.
Please find the below screenshots for your reference.
Please let me know, if you require any clarification.
Thanks & Regards,
Narayana N

Free goods by header net value not Quantity

Regards
My client wants to make a sales promotions as the free goods SD. The difference is that free goods should not be given by the bought quantity of certain material, they should be given from the header net value of an order.
For example:
If a customer have an order with header net value of 100$ from only materials that has certain material pricin group, it should receive one free good.( All the materials in the order have the same material pricing group)
If a customer have an order with header net value of 200$ from only materials that has certain material pricin group, it should receive two free goods.
If there are ways to make this happen please let me know i would really appreciate it.
Thanks
Edited by: Ronald Caroli on Feb 13, 2008 9:13 PM

Hi ronald,
The userexit option is very tough to do.
You are using a right userexit, but how are you coding it? Whats your design and flow?
The BDC are programmable recordings of a standard transaction. Hence you will be able to record the way in which you add a line item to sales order. Ths recording is automatically converted into lines of code by SAP. Then you insert your checks and balances between these lines of code to make it behave the way you want the sequence of transactions to work.
My thought was to make a recording of adding a new line item, in change sales order transaction(va02), with item category as Free of Charge(FOC). Then in the code, I wanted to check for material pricing group, if found correct, then would go finding the net value of sales document. If the value is above the limit, calculate the target quantity. Then follow the rest of the recording and add a new line with FOC as item category.
But this was a seperate transaction, which could be applied seperately and not to be done automatically in sales order. This was becuase say if you switch off the promotion tomorrow, then you will not have to worry abt removing the same functionality from sales order, you just need to de-activate the transaction.
Then there would be issues of doing hardcoding the net value limits, free good quantity in the user exit which is not at all recommended.
Hope this helps.
Abhishek

Letter of Guarantee Value not Updating with Payments

Dear Expert
The requirement from the user is that when a payment is made , the system should deduct the amount paid and refresh the new available value for the customer.
For Example : A Financial document is created with 1000 value . And Sales order created for 8000 . Therefore now the open value is 2000. This means that the customer can order goods worth 2000 only.
In the meanwhile the first order is delivered and billed . And the customer has paid 8000 when he received the bill. this means that now he has paid so he can now order more goods worth 8000.
but in the system it still shows open value as 2000 , although now that the customer has paid, it should be updated with the payments made so the value can be used by the customer that he had paid.
If any of you has any idea how to tackle this ( it works same way in credit management ) but not in financial documents.
we were thinking of another work around , i.e by closing the Financial document that has been paid and creating a new one by adding the remaining balance. i.e 2000+ 8000 , this way the customer can again use his value. but then how can we automate the system to alert the sales user that the payment has been made for a certain invoice for a certain LG.
your idea's and suggestion are highly welcome
Best regards,

Dear ATGSD,
The functionality in GTS is designed for modelling of a single financial document for which the initial value is not updated.
I understand your user's requirement, but surely that is dealt with simply by setting a credit limit in the SAP ERP system? There should be no need to use the GTS functionality at all. In the ERP system, the credit limit is updated by the account payments, exactly as your user requires.
Please let us know if that would work, or if there are more detailed requirements that are not apparent from your post - thanks.
Regards,
Dave

Rounding off Issue (Net Value not equal to Net Price * quantity)

Dear Gurus,
Here is an interesting issue.The default calculation done in the pricing procedure is two decimal places.Now we consider a real scneario,consider the net value of 324 quantities of an item calculated is 36,049.86 .When it is divided by quantity the resulting value of net price is 111.265 but the system shows 111.27 by rounding it off.
Now here comes the problem,my client needs the rate to be shown on the order script to be two decimal places and the net value should be equal quantity * net price.So if we apply this,
324 * 111.27 = 36051.48
But the net value calculated by the system is 36,049.86.So it can be consluded that:
"Quantity * Net Price Shown is not Equal to Net Value calculated by the System"
Need an urgent resolution,project is stuck on this
Regards,
Sam Ahmed
Edited by: Lakshmipathi on Nov 3, 2011 12:14 PM
Please dont add URGENT in subject or in your post

Here is the pricing procedure,
We start with the amount condition types
                                        Unit Price        Units Condition Value
ZMRP     MRP                     1,700.00           10     PAC     55,080.00
ZTRP     Trade Price     1,445.00           10     PAC     46,818.00
ZDPR     Dist. Price     1,445.00           10     PAC     46,818.00         (GL)
Using Trade Price we apply the product discount of 23%
ZPRD     Product Discount     23.000-     %                    10,768.14-
Then we send discount amount to the gl by using condition type ZDIS
ZDIS      Discount Value     100.000-     %           10,768.14-      (GL)
tHE RESULTING NET VALUE IS 36,049.86      as 46818.00 - 10,768.14
     Order Item value     111.27      1     PAC     36,049.86
And the Net Price is 111.27

Invoicing Plan Net Value not equals to Ordered Value

Dear Xperts,
Need your advice.
Is it SAP standards, when an invoicing plan BPO is created with reference to an outline agreement the net value at the outline agreement (header statistic) is taken from the BPO net value (Quantity X Price) NOT BPO ordered value (Quantity X Price X Months).
Scenario Simulated:
(1)     Contract Detail (value contract)
Target Value = RM12,000 (price RM1000 ; 12 months validity)
(2)     Purchase Order
Quantity = 1 pcs ; Price = RM1000 ; Invoicing Plan = 12 months
Ordered Value = RM 12,000
Net Value = RM1000
As a result the utilization value (contract header statistic) is:
Target Value : RM12,000
Net Value : RM1000.
This will lead to a misleading info of utilization value of the contract.
Your experts explaination is highly appreciated.

Anybody?

Excise base value not updated

Dear all,
We have found that excise base value is not updated after creating excise invoices,later we corrected it,
excise base value started updating in table J_1IEXCDTL,
Intially for 2 months excise base value is not updated in table,
Is there any problem will arise in future ?
or
How to solve this issue ?
Jeyakanthan

Awaiting valuable replies.....
Edited by: Jeyakanthan A on Mar 6, 2010 5:36 PM

Net Value not updated

Similar Messages

Maybe you are looking for