Net view doesn't show all network computers in Windows 2012 R2

We have Symantec Endpoint v12 running on Windows 2012 R2. It used to be working fine and we could see all network computers in Endpoint Protection Manager. Since last Friday, the Endpoint Protection Manger can see only two computers. If I run new view
command on the server, it also shows only these two computers. If I open Windows Explorer and then Network, I can see all network computers. The network discovery and share has been enabled. Other servers and computers don't have this problem. What could be
the issue?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

rebooting the server fixes the problem.
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com
yeah most of the time "rebooting" works..
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Similar Messages

Month view doesn't show all events

Dear friends
Something strange started to happen with my iCal.
When I choose month view no events are shown at all.
They are all there because tehy´re shown both in week and day views.
Any clue?
L . gustavo

I have something very similar going on around on two machines used by colleagues.
One is a PowerPC G5 desktop and the other is an Intel MBP.
Weirdly enough, the events don't show only in october (month view), which is the current one.
We have found that by clicking one of the forward / back buttons you can see the next and previous months correctly, AND if you get back to october everything shows up again.
So there seems to be something wrong with the UI or sorta thing.
Both machines are up-to-date (10.4.10). Mac OS is set to run in US English.
Anyone? Help?

IPhone doesn't show all music when I connect to network in iTunes

Hi
In iTunes Preferences on my Mac I've ticked the button to make all my music available over the network.
When I use the Share option in iTunes on my iPhone it doesn't show all the music on my Mac. Is there something else I should set to make this work?
Thanks
Flybridge

PUSH

ICal doesn't show all text for the activity

When I updated to iCal version 8.0 i noticed that when I am in week-view, iCal doesn't show all the text for an activity, although there is plenty of room. For example I have a lecture from 9 am - 4 pm and in the activity I put down all the things I have to do, but it only shows the first line for my activity. I need to drag the box or double click on it to see all the text. Can I change this?

Gabriella,
Sometimes making the Calendar window bigger, or using full screen allows additional text to be displayed.
View>"Make Text Smaller" is also an option for those with Eagle Eyes.

HP 5550 web server doesn't show all required tabs

Good afternoon!
I have an issue with web server on hp 5550 Laserjet. Everything was good, but after reboot, it doesn't show all tabs such as "Information", "Setting", "Networking". It shows only "Home" and "Networking"...
Do someone know how to fix this issue?
Thanks in advance!
Any help will be appreciated!
Igro

Your best bet would be to try Rapidweaver: www.realmacsoftware.com
Best,
Andrew
I am not very into this stuff (can't write HTML),
do you might have a suggestion for an other
WebsiteBuilder?
We can't afford GoLive (which was very cool in the
early days built by CyberStudio) nor have I time to
learn or buy the complex Dreamweaver.

Distiller 'default settings' blank and doesn't show all job options

We're experiencing a problem with Adobe Distiller 9.3.0 being blank next to "Default Settings" with the error, "Error in /Library/Application Support/Adobe/Adobe PDF/Settings/PDFX4 2008.joboptions: /CheckCompliance out of range".
I can delete that joboptions file, which removes the error message, but the Default Settings pulldown menu still is blank and doesn't show all of the joboptions files that it should. Only 2 of them are showing up in the pulldown.
How can I fix this?
I've tried deleting all joboptions files and letting Adobe self repair them and have tried deleting a few com.adobe.distiller* preference files and nothing yet seems to work.
Thanks!

I am connected to a network but we don't share applications. CS5 Design Premium is installed on my machine.
See screenshot below:
What is the relevance of this? We seem to have the same location for the output module file.
Why does mine not work?
See screenshot below:
The Adobe Output Module is in my Startup Scripts but it still doesn't work.

Syncing iphone and can't seem to transfer audiobooks that i have put in a playlist. Sync menu doesn't show all playlists. Help

syncing iphone and can't seem to transfer audiobooks that i have put in a playlist. Sync menu doesn't show all playlists. Help

I have the same problem with podcast playlists. When I go to the music window in my iPhone devices section, the playlists I have created on my macbook pro in iTunes do not appear as an option to sync with the iPhone. I know some web radios streams, like the BBC, won't transfer because of compatibility issues, but the playlists of podcasts that I have created consist entirely of podcasts downloaded from the podcasts section on the iTunes Music Store. They used to show up and sync properly before I upgraded to OS 5.1.1, but now they don't.
Does anyone have a fix and am I right in surmising that the cause is a glitch in OS 5.1.1?

ATV doesn't show all photos in slideshow

My ATV3 doesn't show all my photos in slideshow. It seems to repeat the same, say 50, over and over, even though I have about 400 in the folder on my windows7 PC.
Whats the fix?
Thanks
Andy

For the avoidance of doubt are you talking about the screensaver or the slideshows.
Slideshows should show all your photos, but screensavers will not. Screensavers need to save the photos to the Apple TVs flash storage, the Apple TV doesn't have a lot of this and so limits the number of photos it uses.

Apple TV doesn't show all pictures in photo stream

I have about 1000 pictures in my photo stream, but my Apple TV doesn't show all of them. It shows only 304 photos. How can I get all my photos to my Apple TV via photo stream? I have the latest Apple TV and the latest operating system on it.
Edit:
And I have tried to reset Apple Tv and photo stream.

Welcome to the Apple Community.
Photostream in the cloud only keeps photos from the last 30 days (subject to a 1,000 photo limit). When photostream syncs the photos to your device they will stay there (subject to a 1,000 photo limit) until deleted, which means you may well have more photos in your photostream album on your device than there are in photostream in the cloud.
The consequence of this is that if you turn photostream off and on again on your device (or enable it for the first time), it will only be populated with photos from the last 30 days, which may not be all the photos that were previously in the photostream album on that device.

Package Body in the tree doesn't show all procedures

I am using Sql Developer 1.0.0.14.67 on Win XP Professional,
DB servers Oracle 9i on both Linux Red HAt and Win XP Professional
I have troubles with one of packages - in the tree under Package Body SQL Developer doesn't show all procedures of this package body.
On the right panel all package body source is shown, but in the tree under Package Body it shows names of only procedures up to certain line in the source code - up to line where first Private (not included in Package Spec) procedure code starts.
BUT, there are more Public procedures in package body below this Private procedure - and all of procedures below first private are not included in the tree under Package Body

I find this quite annoying. I cannot use the navigation panel on the left to find the location of all functions and procedures in the package body. The 'missing' procedures are listed under the package spec, and double clicking on them takes me to the spec and not the body.
I'm running v1.2.1.32.13. Is this a know issue and is there a fix planned?

Ipod doesn't show all the songs listed in Itunes even after sync is complete

Ipod doesn't show all the songs listed in Itunes even after sync is complete

I'm going through the same thing, I've tried de-authorizing and re-authorizing my computer and that seems to help. I haven't gotten all my songs back yet, but I've got about 75% of it back.

M3000: show-disks doesn't show all disk.

Hi all,
I have to setup one M3000, when I want to create a devalias, I type show-disks, but it doesn't show all the disk, it only show 2
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
So, a is disk0 1 2 3 ?
and
b is disk 0 1 2 3?
thanks
Please help
====================================================
{0} ok probe-scsi-all
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0
QLogic QLE2560 Host Adapter FCode(SPARC): 2.03 06/30/08
Wait for link up -
Firmware version 4.03.02
Fibre Channel Link down
Possible causes: No cable, incorrect connection mode or data rate
SFP state: 8Gb Present
/pci@0,600000/pci@0/pci@0/scsi@0
MPT Version 1.05, Firmware Version 1.31.00.00
Target 0
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e813d912 PhyNum 0
Target 1
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84aaf3e PhyNum 1
Target 2
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393d84ab082 PhyNum 2
Target 3
Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
SASAddress 50000393e8392a42 PhyNum 3
Target 4
Unit 0 Removable Read Only device TEAC DV-W28S-W J.0A
SATA device PhyNum 4
{0} ok
{0} ok show-disks
a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
c) /iscsi-hba/disk
q) NO SELECTION
Enter Selection, q to quit: a
/pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
{0} ok

Hi.
It's not bug, it's a feture. :)
show-disks show available controlles, that can have connected disk.
For create alias you should manualy add what disks exactly you want use.
disk0 /pci@0,600000/pci@0/pci@0/scsi@0/disk@0
disk1 /pci@0,600000/pci@0/pci@0/scsi@0/disk@1
disk2 /pci@0,600000/pci@0/pci@0/scsi@0/disk@2
disk3 /pci@0,600000/pci@0/pci@0/scsi@0/disk@3
Generaly this aliases alredy created at POST.
Check output of devalias
Regards.

My Dock doesn't show all applications with shortcut

My Dock doesn't show all applications with shortcut
Apple tab only shows some applications on my list not all, anyone know why? I went under system settings to fix it and there is no option for it.
Thanks!

Perhaps I don't understand your question, but if you think that the doc shows every application you have on the computer, this is incorrect. If you want certain applications to be shown on the dock you have to add them to the dock. The dock comes preset with a few select Applications Apple wants to feature but you are free to add others or remove ones you don't use.
Patrick

Why Zinio doesn't show all issues on iPhone 4 but works correctly on ipad?

Why Zinio doesn't show all issues on iPhone 4 but works correctly on ipad?
The same issue is not present on iPhone 4 but exists on iPad
Can anyone help?

Try http://www.lemkesoft.com/ GraphicConverter.

Login Window doesn't show all account

Hi all folks,
I migrate an old OS X Leopard with some Accounts to OS X Yosemite but the Login Window doesn't show all Accounts.
And the Guest Account and the Other Account icon is outside the screen.
Any idea how to order the Accounts in the Login Window, it seems to be the Login Window can't handle more than five Accounts.
Thanks for any suggestion,
Lutz

Hi again,
Thanks for your reply.
I have done the unbind and performed the bind operation again, but its still happening. I have now put a second system in and its doing it on that one too.
I was wonding if there is some way of making sure that Samba is fully started before the login window appears.
Thanks,
Andrew McCall

Net view doesn't show all network computers in Windows 2012 R2

Similar Messages

Maybe you are looking for