Net weaver 7.0 or above in Non Unicode
Hi guys,
Is it possible to install Net weaver 7.0 or above in Non Unicode??
Thanks
CD
Hi,
Please check the below note .
Note 838402 - Problems within non-Unicode system landscapes
New releases of SAP NetWeaver and SAP applications based on SAP
NetWeaver, released in 2007 or later, will no longer support new installations of non-Unicode systems. See also the attached customer letter Customer_Letter_64_U.pdf from April 11th 2006 (also available at www.service.sap.com/platforms).
Existing non-Unicode systems are still supported, but due to the intrinsic limitations of non-Unicode code pages SAP recommends a conversion to Unicode, especially when upgrading system to Netweaver 7.0 (ERP 2005) and higher releases.
Problems can occur after any upgrade, even whithout applying new applications, e.g. in case.existing applications are redesigned based on new technologies.
Please also check the below link.
http://scn.sap.com/docs/DOC-28791
Thanks
Rishi abrol
Similar Messages
-
SAP Net Weaver Version 7.0 Installation
Hello Experts,
Iu2019m totally new in SAP products and I would like to ask about the installation steps as the following:
1-Iu2019m planning to install the following SAP products in one server (16GB RAM, 1TB HDD, Win 2003):
A-Oracle Database Version 10.2
B-SAP Solution Manager Version 7.1
C-SAP Net Weaver Version 7.0
D-SAP ERP-EHP5
E-SAP Base Line
F-SAP CRM
G-SAP SRM
So, is that the right order for the installation, can I install all this products in one server as a demo server?
2-I start the installation steps and I have finished the Database setup (10.2 then patch 10.2.0.4) then installed SAP Solution Manager Version 7.1 and I select Central System Installation Type, and the installation is Finished Successfully, but after the installation I did not find any new programs under windows start menu or all programs, I just found SAP Management Console, so is that the right behavior for this type of installation or I miss something?
3-I follow up all the steps that found in Solution Manager Master Guide until post installation tasks, the first step is to logon the application server, but I did not found it in the all programs menu is that the right behavior?
Thank You And,
Best Regards.
Tarek SalamaHi ,
Welcome to World of SAP !
Please find the suggestions for your queries .
1- Install all the products in one server is not possible .
For each product kindly go through the SAP Installation Guides available
in SAP Market Place . To be more precise kindly study the SAP architecture
basically R/3 3 tier architecture . this will answer your query regarding
installation of Database , SAP application, and Frontend (SAP GUI)
To know About installation & Master Guides of all the below listed product check the link
https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SWDC_ALIAS&TMPL=INTRO_SWDC&V=INST&SWDCQL=swdc&SELAREA=swdc1&SUBLEVEL=A_1_2_2
B-SAP Solution Manager Version 7.1
C-SAP Net Weaver Version 7.0
D-SAP ERP-EHP5
E-SAP Base Line
F-SAP CRM
G-SAP SRM
First of all not possible to install all the products in one server even for demo .
2- Good you have installed the solution manager Kindly follow the Product Availability Matrix PAM before installing the product.
and kindly study the basic architecture and then start installing SAP products .
3.As same as Answered above . Kindly check the links for SAP BASIS practice
SAPEDU Twitter account : http://twitter.com/sapedu
SAP Education Facebook page: http://www.facebook.com/SAPEducation
Education@SAP LinkedIn group: http://www.linkedin.com/groups?gid=1856570
To know the pam on windows : SAP on Microsoft Windows
SAP Basis Tips: http://www.sap-img.com/sap-bc.htm
SAP Books: http://www.sap-img.com/sap-books.htm
SAP Training CBT: http://www.sap-img.com/sap-training-cd.htm
SAP Jobs: http://www.sap-img.com/sap-jobs.htm
SAP help : http://help.sap.com/
About SAP : http://en.wikipedia.org/wiki/SAP_AG
http://en.wikipedia.org/wiki/SAP_R/3
regards,
S.Rajeshkumar -
Dear Experts,
We are using Net-Weaver 4.0 , BW 3.5 and Office-2007. But recently we have installed these over WINDOWS 7.
Previously it was working fine with WINDOWS - XP.
And now after installation , when I put RRMX transaction. I am getting error.
Please suggest , What shall I do ?
Thaks,
UtpalHi Utpal:
Probably you need to install a Front End Patch (FEP), with an "S" account you can download it from the SAP Marketplace.
What is the error message you get? search for related SAP Notes with details on this issue resolution. For example SAP Note 1533608 recommends installing FEP 400 of BW 3.5 Add-on of GUI 720 to solve issues with RRMX Transaction Code.
To download the file do the following.
1. Open the link https://websmp102.sap-ag.de/support
2. Click on the Tab "Software Downloads"
3. Click on the Section "Support Packages and Patches"
4. From the Menu on the left Click on "Browse our Download Catalog" option.
5. Click on the link "SAP Frontend Components"
6. Click on "BI ADDON FOR SAP GUI"
7. Click on "BW 3.5 ADDON FOR SAP GUI 7.20"
8. Click on "Win32" to display the list of available FEP for download.
Regards,
Francisco Milán.
Edited by: Francisco Milan on May 26, 2011 10:00 AM -
How to extract data from oracle database directly in to bi7.0 (net weaver)
how to extract data from oracle database directly in to bi7.0 (net weaver)? is it something do with EDI? can anybody explain me in detail?
Thanks
YorkYou can use UDConnect to get from Oracle database in to BW
<b>Data Transfer with UD Connect -</b>
http://help.sap.com/saphelp_nw04/helpdata/en/78/ef1441a509064abee6ffd6f38278fd/content.htm
<b>Prerequisites</b>
You have installed the SAP WAS J2EE Engine with BI Java components. You can find more information on this in the SAP BW installation guide on the SAP Service Marketplace at service.sap.com/instguides.
Hope it Helps
Chetan
@CP.. -
Hi Regarding How to work on SAP Net Weaver CE 7.1 and BPM
Hi Friends
I need Some help from u r side
Currently i have got work on SAP Net Weaver CE 7.1 and BPM (Business Process Management)
How to Work on these SAP Net Weaver CE 7.1 and BPM (Business Process Management)
If u have any Documents .can u give that links
How Configure SAP Net Weaver CE 7.1 with NWDI can u tell me this think also
Regards
VijayHi Friend,
You can follow following pointers hope it will help.
[SAP NetWeaver MDM-7.1 Key Mapping interoperability with SAP NetWeaver Process Integration-7.1 using Web Services u2013 Webinar Presentation|FEATURED EVENTS;
[Best Practices Workflow for Master Data Managemen|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/50f1c01b-972d-2c10-3d9d-90887014fafb]
[Best Practices on Workflow Tools Usage for Master Date Management (MDM) Scenarios - Webinar Presentation|http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/c0fee6f1-8795-2c10-8ca9-e4883bae5e81]
Regards
Jeetendra -
Could EPM add in for Microsoft 7.5 and EPM add in for Net Weaver 10.0 work together
Good day,
We are going to start a new project, where the client already has EPM add in for Microsoft 7.5. We need to migrate this system to EPM add in for Net Weaver 10.0. When we would testing systems we need to have on the one local PC 2 products :EPM add in for Microsoft 7.5 and EPM add in for Net Weaver 10.0 to compare results. Is it possible to use them parallel? Is there any SAP documents or official materials where is information about this situation.
Many Thanks for the answear!Hi Natalia,
I have the same problem to migrate project, you can' t have both of them logged on at the same time
I solve my problem with a virtual machine, i use VMWare with BPC 7.5 version and host machine with BPC 10 Version.
I hope this will help you.
Regards,
Maycon Franco. -
Is SAP net weaver environment necessary to configure/customize IC Webclient
Hello Expert,
Is SAP net weaver environment necessary to configure/customize IC Web client and Internet sales?
Please guide me.
Thanks & Regards
SatishSingle Sign On is optional.
What would happen is that the user that's using the Web Application Designer will have to have access to Portals, and the portal Sign On screen will appear once that user executes a Web Template.
It also depends on the Portal Strategy and the Security Strategy of your client. For example, the portal may only grant access to those used IDs in the Active Directory, so if your BEx WAD user is not defined in Active Directory that user will not have access to portals, and will not be able to execute the Web Template.
Cheers. -
can any1 provide me the link to download SAP net weaver application server ABAP trial version which is compatible with Windows 8& 8.1,Plz ..
Hi Pedro,
could you fix the error?
I'm installing and I have the same problem.
An error occurred while processing option SAP NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System( Last error reported by the step :Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.). You can now:
Choose Retry to repeat the current step.
Choose View Log to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Archivos de programa/sapinst_instdir/NW701/AS-ABAP/ADA/CENTRAL/.
Thanks.
Anibal -
Reg:SAP Net weaver CE 7.2 ,AS Java is not starting
Hi,
i am new to SAP Net-weaver CE 7.2 ,i have installed SAP NW CE 7.2 Trial version on my system.But when i start the SAP MMC
AS Java proess is not starting.
In the developer trace file it is mentioned that Connection to message server failed.i think the problem is with default communication ports used by the SAP.
Can any one suggest me how to change these default ports to some other ports ?
The trace file says the following:
M [Thr 4516] Tue Oct 05 12:31:59 2010
M [Thr 4516] ***LOG Q0I=> NiPConnect2: 172.25.0.127:3201: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
M [Thr 4516] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 33/sock 1492
(SI_ECONN_REFUSE/10061; I4; ST; 172.25.0.127:3201) [nixxi.cpp 3255]
E [Thr 4516] *** ERROR => EnqTCDisconnect: EnqTCIGetConn failed; invalid TChdl 33 [enxxtc.c 346]
M
M [Thr 4516] Tue Oct 05 12:32:00 2010
M [Thr 4516] ***LOG Q0I=> NiPConnect2: 172.25.0.127:3901: connect (10061: WSAECONNREFUSED: Connection refused) [nixxi.cpp 3255]
M [Thr 4516] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 25/sock 1512
(SI_ECONN_REFUSE/10061; I4; ST; 172.25.0.127:3901) [nixxi.cpp 3255]
M [Thr 4516] *** ERROR => MsINiWrite: NiBufSend (rc=NIECONN_REFUSED) [msxxi.c 2730]
M [Thr 4516] *** ERROR => MsIAttachEx: MsINiWrite (rc=MSENILAYER) [msxxi.c 881]
M [Thr 4516] *** ERROR => MsPrvGetHdl2: not_attached [msxxi.c 1956]
Thanqx in advance..............>LOG Q0I=> NiPConnect2: 172.25.0.127:3201: connect (10061: WSAECONNREFUSED: Connection refused)
Mean your application is not able to connect to IP 172.25.0.127 on port 3201.
what is your server IP? can you please do below test from command prompt
telnet 172.25.0.127 3201
also send log from dev_icm -
How to download and install SAP Net Weaver Gateway Plug-in for Eclipse?
I have installed the SAP UI5 development tool kit for Eclipse. What else should I do? How can I download SAP Net Weaver Gateway Plug-in for Eclipse?
After developing the application, should I run that with Apache Tomcat? How to get the access to database?you can find netweaver gateway tool from SAP Development Tools for Eclipse. and follow the installation instructions
-
NET WEAVER GENERAL SETTINGS CURRENCY SET DECIMAL values
sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
My problem is when checked in EKPO table , it saved with a value 1425023.00 So this is decimal value error. what can be done to correct this.
But In in SPRO>> NET WEAVER >> GENERAL SETTINGS >> CURRENCY>> SET DECIMAL values FOR CURRENCY CODES is showing 0 decimals against JPY (Japanese YEN)
I want to know where else the Decimal values could have been set to 2 decimal places.
Regards,
Srinivasa Murthycheck the following posting :
Re: $ USD shows no decimal place values
hope this helps -
SPRO NET WEAVER GENERAL SETTINGS CURRENCY SET DECIMAL VALUES
sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
My problem is when checked in EKPO table , it saved with a value 1425023.00 So this is decimal value error. what can be done to correct this.
But In in SPRO>> NET WEAVER >> GENERAL SETTINGS >> CURRENCY>> SET DECIMAL VALUES FOR CURRENCIES is showing 0 decimals against JPY (Japanese YEN). How can it have saved to EKPO like that.
I want to know where else the Decimal values could have been set to 2 decimal places.
Regards,
Srinivasa MurthyCheck
Re: JPY Currency With Decimal upto 2,3 Decimal -
Does Session Sharing feature provided by SAP Net Weaver application server
Hi All,
Session Sharing is an additional feature provided by Tomcat , Weblogic and Web sphere application servers.
Is this feature available in SAP Net Weaver application server?
Brief description on Session Sharing
Session Sharing specifies whether HTTP sessions are shared across multiple Web applications.
In Weblogic this is an optional feature customizable in weblolgic-application.xml
Sample weblogic-application.xml
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-application xmlns="http://www.bea.com/ns/weblogic/90" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<session-descriptor>
<persistent-store-type>replicated_if_clustered</persistent-store-type>
<sharing-enabled>true</sharing-enabled>
</session-descriptor>
</weblogic-application>
session-descriptor (Optional Element ) - Specifies a list of configuration parameters for servlet sessions.
sharing-enabled (Optional Element ) - Specifies whether HTTP sessions are shared across multiple Web applications. Default value is false.
Thanks in advance.
Regard's
Srikanth
Edited by: Srikanth A on May 14, 2010 7:36 PMHi,
You cannot set up Garbage collection frequency. it is internally handled by Java when the Heap size is filled up.
You can always fine tune your server to SAP recommendations.
Note 723909 is a good starting point.
Also other checks include that you use SAP recommended Java versions, OS patches and also that you have enough physical memory.
Thanks & Regards,
Vijith -
Factory Calender in net weaver
Dear all ;
How to maintain the factory calender in Net weaver ,I have just tried to create one holiday calender for the year 2011-2015 ,system is showing the error :" please maintain a validity periord between 1996-2010".
Ites a urgent requirement ,kindly reply .
Thanking you;
Regards;
Joydeep MukherjeeHi,
Please refer the below links.
http://help.sap.com/saphelp_nw2004s/helpdata/en/2a/fa00dc493111d182b70000e829fbfe/frameset.htm
http://**********************/2008/09/factory-calendar-for-plants.html
Factory calender
Hope it help you.
Thanks. -
How to design a query without using Net Weaver Query Designer
Does anyone know if any alternative way to <b>design an query without using Net weaver GUI</b>? in order to reduce the time consuming, I am wondering if there have any method which can define/modify a stack of cells, characteristics and structures without work through the GUI.
Deeply thank for any of your advices.Can you give an example?
Just from what you write, I would assume that you talk about something like a mass-property-changer. As far as I know the BEx this is not really possible, but what I do normally is building one query and then either using query-views (saving more or less the navigation state) or by copying and changing the properties of the few characteristics and key figures.
But without a specific example it's difficult to exactly understand what you exactly need.
Mario
Maybe you are looking for
-
Can not see iPhone on Windows XP after updating to 1.1.1
I can not download my pictures shot with the iPhone since I can no longer see the iPhone under 'My Computer' folder in WinXP. Prior to 1.1.1 update the phone showed up and I could copy and delete photos. Now I seem to be locked out. Can anyone tell m
-
Delete global stats, leave partition level only in 10.2.0.3 .
Hi, there is 10.2.0.3 4 node rac datawarehouse , most queries are with predicate related to partition key . So there is a lot of partition prunning involved . Currently data load is done via exchange partition and then only that partition stats is ca
-
JIT Scheduling Agreement Not getting saved
Hi Gurus, while saving a JIT scheduling agreement LZJ type in VA31 t-code, i am getting the following error; "Call usages for LP 30075000 and JIT customer SAJ4 do not match. Message no JIT00 801" can anyone of you let me know what setting is missing.
-
I just bought my mac book pro and updated to mountain lion and I don't know why it is taking around 1minutes and 10sec to boot up,does anybody have any idea? and also how can I make my laptop boot up faster?thank you in advance
-
Extract 11g part 1 of 2. Some files corrupted
All: Please i know the answer to this is just to download a fresh zip file of oracle 11g part 1 of 2. But is there any other way out. In the part of the world i am in, internet is slow and i dont have 1.25gig of data. Got errors while extracting the