Net Weight (NTGEW) does not populate in table VBRP and LIPS for Purch Order

The net weight field (NTGEW) does not populate in tables VBRP and LIPS when created from a Purchase Order.  The field Net Weight (NTGEW) does populate when created from a sales order.  Do you know if there is a way to make the field populate when created from a Purchase order?
Thanks,
Ta

Hi,
Ta
In Material master Basic Data tab 1, you have to maintain Gross wgt and net weight. then when you creating purchase order, The Item level, Additional data tab you will able see Gross and net wgt.
I hope solved your problem.
Regards....
Sanjeev

Similar Messages

  • After updating to iOS 8 my iPad 2 does not keep my user name and password for isp start page

    After updating to iOS 8 my i pad 2 does not store the user name and password for my earthlink start page.  In past could go to bookmark and the start
    page would automatically come up.  Now I must enter the user name and password every time to access the personalized start page.  tried to find some settings that needed changing but no luck.  is this a problem with iOS 8     Earthlink referred me to apple   they could not help    any help here

    Hello nkrlw,
    It may be that AutoFill is disabled in Safari, or that Private Browsing is on.
    Go to Settings > Safari > Passwords & AutoFill and make sure that Names and Passwords is on.
    Go to your Home screen and open Safari. If Safari is black or dark instead of white or gray, Private Browsing is on. Safari doesn't save account names and passwords when Private Browsing is on. To turn off Private Browsing:
    On iPad, tap the the plus icon in the upper-right corner of the Safari page, then tap Private in the lower-left corner.
    On iPhone and iPod touch, tap  in the lower-right corner of the Safari page, then tap Private in the lower-left corner.
    Get help using iCloud Keychain
    http://support.apple.com/kb/TS4644
    Cheers,
    Allen

  • How come firefox does not remember my user name and password for the verizon wireless website ? or verizon wireless ?

    how come when i log onto the verizon wireless web site to pay my bill, i have to sign my user name and password every time ? i am not getting the firefox pop up asking me if i want firefox to save my password for this site. so how do i get firefox to remember my log in information for my verizon wireless website ? thank you.

    This would be verizonwireless.com, correct? Their site requests that browsers should not save information for its login form.
    If you're comfortable with using bookmarklets, there's one here that should force Firefox to remember:
    https://www.squarefree.com/bookmarklets/forms.html#remember_password .

  • TS3276 I receive a pop up from ICal saying the server does not recognize me user name and password.  This started yesterday.  I have no problems with receiving or sending emails through Mail

    I receive a pop-up from ICal saying the server does not recognize my user name and password for my me.com email address.  This started yesterday and occurs about every 5 minutes or so.  There are no problems with receiving or sending email through Mail.  I did change me email password several days ago but have no problems sending/receiving since then.

    I fixed the problem.  I opened Preferences in ICal and entered my new password.  No more pop-ups

  • Ssrs 2012 - dataset does not populate in designer

    Hi,
    Stored proc. (sp) returns fields in the query designer of SSRS 2012.
    but the dataset does not populate fields in the designer.
    in case it makes any difference, note that the sp uses functions in several places.
    Any suggestions please?
    Thanks

    Hi there,
    Does the stored proc use temporary tables?  Are multiple resultsets returned?
    Can you try simplifying the stored procedure until it populates the fields properly?
    cheers,
    Andrew
    Andrew Sears, T4G Limited, http://www.performancepointing.com

  • Cluster does not populate in sub-vi unless front panel is opened

    I have a sub-vi that saves my data to a database and the cluster
    containing the data will not populate unless I open the front panel
    when it executes.  What could possibly cause this?

    It is the readings cluster that does not populate.  That is the input cluster for the vi.  When I run in the development environment the program saves correctly without opening "Save Readings.vi".  However after the complete program is compiled the data will not save unless "Save Readings.vi" is opened when it executes.  I have attached the missing vis
    Attachments:
    Log SQL.vi ‏27 KB
    Connect SQL Server.vi ‏48 KB
    Update Process Info.vi ‏81 KB

  • Position does not exist in table T528

    I have transported from Dev to QAS.
    I am trying to hire an employee using PA40 and when i select position it is giving an error saying does not exist in table T528

    Hello,
    I have created a entire new org. structure in QA including the positions.
    When I am trying to assign the positions I am getting the same error as entry does not exist in table T528B.
    I have checked the table and there are no entires for my positions.
    What I need to do now?
    Kindly reply.
    Thank you

  • Argument does not exist in Table?

    Hi,
    I'm trying to create Planned Independent Requirements using the BAPI_REQUIREMENTS_CREATE.
    Getting the error "Argument does not exist in Table".
    I'm passing the following parameters.
    REQUIREMENTS_ITEM
          MATERIAL    = '000000000000015197'.
          PLANT         = 'ABC1'.
          REQU_TYPE= 'TEST'.
          VERSION    = '00'.
          VERS_ACTIV = 'X'.
          REQ_NUMBER = ''.
    REQUIREMENTS_SCHEDULE_IN
    DATE_TYPE = '2'.
    REQ_DATE  = '20101001'.
    REQ_QTY   =  50.
    PROD_VES  = '0010'.
    REQUIREMENT_PARAM
          STATUS  = ''.
          TRTYP   = 'X'.
          DELKZ   = SPACE.
          SYNCRON = 'X'.
    Did I miss any parameters?
    Why I'm getting this error?
    Thanks
    Thruna

    Ryan,
    Are you passing all the parameters like below?
      SSHDIN-DATE_TYPE = '2'.
      SSHDIN-REQ_DATE  = '20100101'.
      SSHDIN-REQ_QTY   =  100.
      APPEND SSHDIN.
          ITEM-MATERIAL    = '00000000000012345'.
          ITEM-PLANT         = 'ABC1'.
          ITEM-REQU_TYPE  = 'TEST'.
          ITEM-VERSION    = '00'.
          ITEM-VERS_ACTIV = 'X'.
          ITEM-REQ_NUMBER = ''.
          ITEM-MRP-AREA = 'ABC1'.
          PARAM-STATUS  = 'X'.
          PARAM-TRTYP   = 'X'.
          PARAM-DELKZ   = SPACE.
          PARAM-SYNCRON = 'X'.
          CALL FUNCTION 'BAPI_REQUIREMENTS_CREATE'
               EXPORTING
                    REQUIREMENTS_ITEM        = ITEM
                    REQUIREMENT_PARAM        = PARAM
               IMPORTING
                    MATERIAL                 = BAPI_MATNR
                    PLANT                    = BAPI_WERKS
                    REQUIREMENTSTYPE         = BAPI_BEDAE
                    VERSION                  = BAPI_VERSB
                    REQMTSPLANNUMBER         = BAPI_PBDNR
               TABLES
                    REQUIREMENTS_SCHEDULE_IN = SSHDIN
                    RETURN                   = RETURN1
               EXCEPTIONS
                    OTHERS                   = 1.
    Thanks
    Thruna

  • Management Studio 2008 does not refresh after table create / alter

    hello
    Management Studio 2008 does not refresh after table create / alter, why?
    f5 / refresh button does not work in "Object Explorer".... i always need the restart the whole application to see any changes, this is strange...
    regards, jan

    Hi jm,
    I’m writing to follow up with you on this post. Was the problem resolved after performing Vishal ‘s steps? If you are satisfied with our solution, I’d like to mark this issue as "Answered". Please also feel free to unmark the issue, with any new findings
    or concerns you may have.
    Thanks,
    Sofiya Li
    Sofiya Li
    TechNet Community Support

  • Step 3 in payment wizard does not populate any BP's?

    Hi all-
    We have a customer that is trying to run the payment wizard for outgoing payments.  In Step 3  the payment wizard does not populate any BP's?  We think we have all of the settings correct.  Is there anything 'not obvious' that might prevent the vendors from populating on this step 3 (we choose all vendor groups and vendors DO have balances).
    Any ideas as to where to look or what to check would be greatly appreciated.
    Thanks Pat.

    Hi Pat,
    the most common reason for this is that no payment run defaults were selected. As for the definitions necessary, please have a look at note 725786 - Definitions necessary for the payment wizard.
    All the best,
    Kerstin

  • My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters are showing up as green, which is fine in the chapter but not in the TOC.

    My table of contents does not use the entry style I select for words in the paragraph that have character styles applied to them in the chapter, so some of the letters, specifically parameters, are showing up green, which is fine in the chapter but not in the TOC. I can manually fix this in the TOC by changing the character style to none after the toc  has been generated, but I don't want to do this.

    What application are you running? Please ask this in the forum of the product you're using.

  • Database Adapter Wizard does not show accessible table

    HI guys,
    in the wizard I am unable to see the tables which I need to use for database adapter.
    But I do have access to those tables, and able to select from them in SQL worksheet from with in Jdev.
    I dont own the tables, but my user id have readable access to those tables.
    Any help is appreciated.
    P.S. If I didnt explain it properly, plz let me know. It really creates lot of access issues if I can only create DB adapter on My owned tables.
    :)

    Hi there,
    please see the answer to your duplicate post on the BPEL forum:
    DB Adapter does not show selectable tables
    In general BPEL forum gets a lot more traffic but I will try to address questions on both equally.
    Thanks
    Steve

  • Error in formula field: Column 'TASK_BCWP' does not belong to table Task

    Hi,
    We have a formula field to calculate the a cost KPI and that field throws an error in the ULS logs. The error is: PWA:PWA, ServiceApp:Project Server Service Application, User:GDFN\IPL_Content, PSI: SSP: Formula Evaluation Failed! - trying to continue - (System.ArgumentException:
    Column 'TASK_BCWP' does not belong to table Task.
    We are running EPM 2010. Recreating of the custom field did not work. We are not running with the latest CU yet.
    The formula that we use is:
    IIf([BCWP] > 0; [ACWP] / [BCWP]; 1)
    The stack trace from the ULS log is:
    PWA:http://gdfn-ipl-14/PWA, ServiceApp:Project Server Service Application, User:GDFN\IPL_Content, PSI: SSP: Formula Evaluation Failed! - trying to continue - (System.ArgumentException: Column 'TASK_BCWP' does not belong to table Task.
    at System.Data.DataRow.GetDataColumn(String columnName)
    at System.Data.DataRow.get_Item(String columnName)
    at Microsoft.Office.Project.Server.BusinessLayer.FormulaDataProvider.HaveColumn(DataRow row, String columnName)
    at Microsoft.Office.Project.Server.BusinessLayer.FormulaDataProvider.GetTaskData(Guid nodeId, Int32 fieldId)
    at Microsoft.Office.Project.Server.BusinessLayer.FormulaDataProvider.GetDataInternal(Int32 entityId, Guid nodeId, Int32 fieldId, Boolean canChangeEntity)
    at Microsoft.Office.Project.Server.BusinessLayer.FormulaDataProvider.GetData(Int32 entityId, Guid nodeId, Int32 fieldId)
    at Microsoft.Office.Project.Server.BusinessLayer.Formula.FieldExpression.Evaluate(IFieldEvaluator context, Guid nodeId)
    at Microsoft.Office.Project.Server.BusinessLayer.Formula.GreaterExpression.Evaluate(IFieldEvaluator context, Guid nodeId)
    at Microsoft.Office.Project.Server.BusinessLayer.Formula.ConditionalExpression.Evaluate(IFieldEvaluator context, Guid nodeId)
    at Microsoft.Office.Project.Server.BusinessLayer.Formula.FormulaEvaluator.Evaluate(PlatformContext context, Expression formula, Int32 entityId, Int32 fieldId, Guid nodeId, Dictionary`2 entityFormulaFields)) + -- FieldId = 188776525 -- NodeId = 1b1149c1-52c2-4f7f-ba60-6d65effdb6b3
    -- Formula = IIf(Greater([MSPJ188743691], 0), Divide([MSPJ188743800], [MSPJ188743691]), 1)
    I have no clue where to start looking for the cause of this error. Any help would be appreciated.
    Thanks,
    Quint Mouthaan

    Hi Quint,
    This can because of database fragmentation. I would recommend you to re-index the databases and perform a de-fragmentation and can check the behavior.
    On the other hand when you receive this message, you can try an IISRESET and check. Additionally you can use refer to following link for de-fragmenting queries.
    http://support.microsoft.com/kb/943345
    Happy troubleshooting.
    Vikram Daruru - MSFT

  • If it says package net.jini.discovery does not exist,whar should i do?

    if it says package net.jini.discovery does not exist,whar should i do?i'm compiling using the command prompt.but i write the program in jcreator.help..

    Ensure the Jini JAR files are on your classpath when you execute.

  • Release strategy: Tx CL20N Error: Entry 01 does not exist in table T16FS

    Dear MM Gurus,
    I was designing new release strategy for PR and PO, so I deleted all the previous entries(SPRO) available in SAP. I created my new entries but in the transaction CL20N I got the above mentioned error: "Entry 01 does not exist in table T16FS-Check your entry" . I checked the table T16FS, where the entries were available. It also showed the previous entries I deleted from SPRO.
    Refering the SAP note 365604 (version 29, valid from 08.10.2008), I created the deleted entries again so that I could delete them in the required sequence
    1. release strategies
    2. release indicators
    3. release codes
    4. release groups
    5. class
    After deleting the entries in the above mentioned sequence also I am getting the same error in CL20N.
    I ran report RCCLZUOB, it shows the entries does not exist.
    Please help.
    Edited by: Akshay Kurhe on Mar 2, 2009 6:02 AM

    hi
    check this setting
    Distribution Using Object Classes -->Maintain Class Types & Maintain Classes

Maybe you are looking for