Net works only after running "dhcpcd eth0" : Kernel 2.6.27

Hi.!
Ever since I upgraded to 2.6.27, my net connection works only after I run the command "dhcpcd eth0" after booting in the system.Any suggestions to get net working without issuing this command would be great.!
Thanks and Regards,
Poisonblack
EDIT: A search on the forum reveals these two threads that may be related to mine...
http://bbs.archlinux.org/viewtopic.php?id=57081
http://bbs.archlinux.org/viewtopic.php?id=57043
http://bbs.archlinux.org/viewtopic.php?id=57102
Will have a closer look on the threads when I get back on Arch.
Last edited by Poisonblack (2008-10-16 17:32:54)

Poisonblack wrote:
Hi.!
Ever since I upgraded to 2.6.27, my net connection works only after I run the command "dhcpcd eth0" after booting in the system.Any suggestions to get net working without issuing this command would be great.!
Thanks and Regards,
Poisonblack
EDIT: A search on the forum reveals these two threads that may be related to mine...
http://bbs.archlinux.org/viewtopic.php?id=57081
http://bbs.archlinux.org/viewtopic.php?id=57043
http://bbs.archlinux.org/viewtopic.php?id=57102
Will have a closer look on the threads when I get back on Arch.
I don't know if this will help or not, but I was having a problem with the "-R" argument and my dhcpcd.
I used to have my dnsmasq and OpenDNS using this guide: http://wiki.archlinux.org/index.php/Pos … ure_dhcpcd
I had to remove the "-R" to get my internet to work after the last update.... it's still not fixed but at least my Internet works when I start.

Similar Messages

CC 2014 nik efex - My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either

My Nik Efex filters are not working in Photoshop CC 2014 - they appear under plug-ins and seem to work, but after running and clicking okay, no new layer appears - seems to have no effect. The separate menu panel does not appear either. Help with this?

BINGO !!!!
Thanks so much Woodsroad. I had the exact same problem with my Dell Windows 7 64 bit with AMD Radeon 6700 Video card.
All the video tests passed with flying colors.
The sniffer rename trick fixed the problem.
Thank goodness for the internet!

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

Captivate 8 - Next Button Works Only After Viewing Slide

How do I make a Continue button work only after the viewer has viewed the entire slide?
I also want the viewer to be able to skip ahead instantly through slides they have already viewed.
Thanks.
- Jason

Let me show you what I'm trying to create here. Sorry I need specific instructions since I'm a newbie to Captivate and not familiar with conditions and advanced actions.
I am currently using normal buttons (not a shape button) to create my PREVIOUS & NEXT buttons. Based on your advice I will switch to shape buttons.
"It could be done with a conditional advanced/shared action on Enter of each slide. You'll need a user variable per slide, a Boolean, that you change on the first visit from a default value of 0 to 1, after having checked its value."
What specifically do I select for the "On Enter" of each slide?
And do I only need to put this condition in the "On Enter" section of each slide? Or do I also need to setup special conditions for the NEXT button?
Thanks.
- Jason Boone

Wpa_supplicant: scan_ssid=1 needed only after 2.6.29 kernel upgrade?

Like many others, I ran into wireless networking issues after the upgrade to kernel 2.6.29. Specifically, I use iwl3945 and experienced errors when attempting to connect to WPA-encrypted networks with hidden SSIDs via my usual netcfg profiles.
As described here, I finally found a solution to my problem. Like SubGothius in this thread, I found that that "magic" fix was to ensure that the network parameter scan_ssid=1 was used when attempting to connect to my network. Because the temporary wpa_supplicant config created by netcfg does not include this parameter, I created a small patch (see first thread referenced above) to use that parameter whenever the SCAN option is not enabled for a network profile.
As I said, I have fixed the error; however, now I am (extremely) curious. Here is a rundown of what I have witnessed:
- Before the kernel upgrade (2.6.29), I was able to connect to WPA-encrypted networks with hidden SSIDs successfully. (I use two different such networks.)
- After the kernel upgrade, I was unable to connect to these networks. netcfg returned "Network unavailable" errors (for at least one of the two networks I tried).
- I was able to connect manually (i.e., with ifconfig, iwlconfig, and wpa_supplicant); however, doing so required that I add the scan_ssid=1 parameter to my configuration for the network.
- I looked into the issue, and installed crda (as many users recommend). (I can't recall for sure, but I think that this led to netcfg changing to an "Unable to connect"-type error.)
- Following the advice in this thread, I created a "wpa-config" netcfg profile that did work; however, I wanted to use my normal profiles.
- After connecting with my wpa-config profile and then disconnecting, I could connect with my normal profile once (i.e., after disconnecting, I could no longer reconnect with my normal profile unless I again connected with the wpa-config profile and disconnected).
- I looked through the netcfg scripts and found that it generates a temporary config file for wpa_supplicant (for me, /tmp/wpa.wlan0) using wpa_passphrase, thus not including any value at all for scan_ssid.
- I made some modifications to the netcfg scripts, with the result being a netcfg that will include scan_ssid=1 in certain situations (see above). Using this modified netcfg, I can connect to the network.
Does anyone know why I was able to use netcfg successfully before the upgrade (i.e., without it needing scan_ssid=1 set)? I've seen (here) that others using iwl3945 have resolved the issue simply by installing and configuring crda, and it appears that (in that one example, at least), the solution worked for a network profile using SECURITY="wpa" (rather than "wpa-config").
If there's a more proper solution to my problem, please post it; otherwise, I'd just like to know why this need for scan_ssid=1 arose only after the kernel upgrade (and does not seem to affect all iwl3945 users).
Thanks!
Last edited by ssjlegendx (2009-04-20 23:26:36)

Like many others, I ran into wireless networking issues after the upgrade to kernel 2.6.29. Specifically, I use iwl3945 and experienced errors when attempting to connect to WPA-encrypted networks with hidden SSIDs via my usual netcfg profiles.
As described here, I finally found a solution to my problem. Like SubGothius in this thread, I found that that "magic" fix was to ensure that the network parameter scan_ssid=1 was used when attempting to connect to my network. Because the temporary wpa_supplicant config created by netcfg does not include this parameter, I created a small patch (see first thread referenced above) to use that parameter whenever the SCAN option is not enabled for a network profile.
As I said, I have fixed the error; however, now I am (extremely) curious. Here is a rundown of what I have witnessed:
- Before the kernel upgrade (2.6.29), I was able to connect to WPA-encrypted networks with hidden SSIDs successfully. (I use two different such networks.)
- After the kernel upgrade, I was unable to connect to these networks. netcfg returned "Network unavailable" errors (for at least one of the two networks I tried).
- I was able to connect manually (i.e., with ifconfig, iwlconfig, and wpa_supplicant); however, doing so required that I add the scan_ssid=1 parameter to my configuration for the network.
- I looked into the issue, and installed crda (as many users recommend). (I can't recall for sure, but I think that this led to netcfg changing to an "Unable to connect"-type error.)
- Following the advice in this thread, I created a "wpa-config" netcfg profile that did work; however, I wanted to use my normal profiles.
- After connecting with my wpa-config profile and then disconnecting, I could connect with my normal profile once (i.e., after disconnecting, I could no longer reconnect with my normal profile unless I again connected with the wpa-config profile and disconnected).
- I looked through the netcfg scripts and found that it generates a temporary config file for wpa_supplicant (for me, /tmp/wpa.wlan0) using wpa_passphrase, thus not including any value at all for scan_ssid.
- I made some modifications to the netcfg scripts, with the result being a netcfg that will include scan_ssid=1 in certain situations (see above). Using this modified netcfg, I can connect to the network.
Does anyone know why I was able to use netcfg successfully before the upgrade (i.e., without it needing scan_ssid=1 set)? I've seen (here) that others using iwl3945 have resolved the issue simply by installing and configuring crda, and it appears that (in that one example, at least), the solution worked for a network profile using SECURITY="wpa" (rather than "wpa-config").
If there's a more proper solution to my problem, please post it; otherwise, I'd just like to know why this need for scan_ssid=1 arose only after the kernel upgrade (and does not seem to affect all iwl3945 users).
Thanks!
Last edited by ssjlegendx (2009-04-20 23:26:36)

W520 Turbo Boost works only after entering Setup (BIOS 1.34)

Hi there,
similar issue but not quite fitting the thread about Intel TB missing in Battery mode, I can reproduce the following BIOS/Windows bug:
- boot the system without entering BIOS straight to Windows 7 : Intel Turbo Boost not working (i.e. frequency dynamically changes between 800 and 2500 Ghz)
- boot the system, enter setup, press F10 and save settings (without changing anything), boot Windows: Turbo Boost works
Is this a BIOS or a Windows problem? It is a workaround to get Turbo-Boost always, but quite inconvenient.
Can someone with similar Turbo Boost problems perhaps check if this is a general issue and could be fixed by Lenovo in a new BIOS update?
System: W520 i7-2860QM @2500 MHz, BIOS 1.34 (same problem on BIOS 1.26).

Hi again,
after spending an afternoon with an IBM service technician we isolated the problem. To make sure we switched boards and tested 4 bios version: 1.26, 1.32. 1.34 and 1.35.
Problem can be reproduced and monitored with Intel Turbo Boost Monitor tool and/or CPU-Z.
Turning
BIOS CPU setting: hyperthreading - off
causes undefined behavior of the turbo boost settings. It works for some reboots. It seems to cause problems more often when the NVidia card is running (either through setting GPU to discrete or by using DisplayPort). Sometimes when taking out AC adapter and plugin back in it won't.All in all very random behavior, but 1 in 4 trials it won't work. Also, when the notebook was off for some time, turbo-boost never works on first boot (need to enter setup at least once, then it will work for some time and reboots).
Symptoms:
Whenever Turbo-Boost is not working, CPU goes only to 2.5 Ghz at max.regardless of energy plan settings.
Switching Hyperthreading back on has (so far) solved the isse (both on AC and battery-without-GPU mode), tested successfully with BIOS 1.32, 1.34 and 1.35. Now we have turbo boost but slightly slower single-core simulationn performance. Not nice, but at least there is a workaround.
Workaround so far (until Lenovo has fixed the BIOS): leave Hyperthreading turned on.
(PS: The service issue was marked as "not solved" and will be send a level higher in Lenovo Support - let's see how this will be taken care of).

VPN works only after reload

Hello,
I have a Cisco ASA5505 setup for VPN trough IPSec (L2TP). I can connect from wherever I want to it using the user and password.
The only problem is that, after 2-3 days I have to reload the appliance because it denies connection on port 500 UDP. After the reload everything works fine again.
Do you know how to handle this kind of problem? Is is a bug in the software or it could be only a misconfiguration?

forget the diagnostics and launch airport utility and if a yellow button is showing, double click it and read what it says to correct.

Virtual hosts work only after I will restart a httpd

This is strange. I'm using Apache server, and have problem with virtual hosts. For example I have a host:
<VirtualHost myhost.localhost:80>
ServerAdmin [email protected]
DocumentRoot "/srv/http/projects/2014/myhost.pl/public_html"
ServerName myhost.localhost
ServerAlias www.myhost.localhost
ErrorLog "/var/log/httpd/myhost.localhost-error_log"
CustomLog "/var/log/httpd/myhost.localhost-access_log" common
<Directory "/srv/http/projects/2014/myhost.pl/public_html">
AllowOverride All
Options Indexes FollowSymLinks
Require all granted
</Directory>
</VirtualHost>
I also added a
127.0.0.1 myhost.localhost
line to /etc/hosts file.
Now when I restart my computer myhost.localhost will show me default "It works!" message, and just after "sudo systemctl restart httpd" the proper website will appear under this address. Why is that?

Not sure what your actual hostname is; but this is probably related to DNS not being available at boot. Depending on your actual name; apache might listen on the wrong interface / source-address for this domain; which is only fixed by restarting it when you have a working dns-server.

Ipod works only after keeping it near the car airconditioning vents

I have an unique problem. I stay in the middle east and have left behind my ipod in the car a number of times. My 2 year IPod is showingm a unique problem. It refuses to send anything to the earplugs/car speakers for the first 5 minutes or so. However it operates smoothly (meaning on screen everything is fine).
Only when I keep the ipod on the air conditioning vents for a couple of minutes, the ipod starts working after making a few screeching noises..
Pls help.

EDEEPAK wrote:
The ipod was working fine for two years , so it should not be the temperature problem.
I disagree. Electronic components can be damaged by excessive heat, and since the temperature inside a car here in the UK on a mild spring day can be as high as 35° C, I would imagine that in the middle east, it would not take long for the heat build up to be well above the 45° C maximum specified by Apple.
Typically, when electronics get very hot, the metal components can expand and if the temperature goes above the design limits this can force the soldered connections of two different parts to separate, thereby causing all or part of the unit to stop functioning correctly. (I still have a first generation CD player that does this due to the amount of heat it generates internally. I've repaired it three times!) If a connection breaks, there is a theory that "freezing" the iPod (or rather - cooling it down) will cause the metal to contract and thereby make proper contact again, thus allowing the iPod to work. This is not a "fix" and may not work at all.
But what I've mentioned above applies to larger devices with parts you can see. The iPod has very small components and circuits that are too small to see with the naked eye, possibly making it even more prone to temperature damage.
Consider this; some manufacturers "test-bake" their products in special ovens so that they can prematurely age them in order to test how long they will last in real life. So the fact that your iPod worked without trouble for two years in excess temperatures does not mean that it will continue to do so.
Sorry to say that it sounds like your iPod is displaying the typical symptoms of a heat damaged electronic device.

In some pc ActionScript not working even after running the .SWF or .EXE, what may be the problem ?

In my flash project i am using ActionScript to get FULLScreen and mouse hide action. I hv already used the AS3 in Adobe Flash CC and AS2 in Adobe Flash CS6. All my files are working well, both .SWF and .EXE (projector..) . But the client is saying in his pc the Full SCREEN and Mouse hide is not working. I instructed to update the flash player plugins, still they are getting the same issue. What is the matter pls any one guide us. My code is in the first frame of Flash file which is mention below.
/*AS2 code*/
fscommand("fullscreen","true");
Mouse.hide();
/*AS3 code*/
stage.displayState = StageDisplayState.FULL_SCREEN_INTERACTIVE;
stage.scaleMode = StageScaleMode.SHOW_ALL;
Mouse.hide();

Hi all, few days ago the client told , one of the project file (.SWF and .EXE) showing full screen. Again day before yesterday the client again said, all the project files working Full Screen and Mouse hide action. Still i do know such happens ? if any technical issue is behind its problem than anyone pls inform me. However it is running well in their PC now.

Why does MMS work only after turning the iPhone off and on for iOS6?

I got the new iPhone 5. When sending/recieving pictures i have to turn the phone off and then on. For sending, it works for about 5 minutes and then i can't send anymore. I tried turning wifi off and leaving data on, turning LTE and wifi off with data still on, and other combinations. The only time it works is when i just turned it on.

The message you are seeing is telling you that you do not have enough storage on your device. That has nothing to do with iCloud storage.
iCloud storage is storage on Apple's servers hosting your online iCloud account. The storage on your device is local and cannot be expanded - it is whatever you bought with the device (16GB, 32GB, 64GB).
You need to delete things on your device to increase free space on the device itself.
For example, if you have a lot of pictures in your camera roll, you need to sync those to your computer's photo management software and storage, then delete them from you iPad.
You can delete apps you no longer need or use. You can delete messages you no longer read or use.
Bottom line is you need to remove stuff from the iPad itself to free up more space.

Why does keyboard work only after restart

This is an irratic problem. I have pen/pad not mouse but same thing methinks, can open files etc but when it comes to filling in anything it will not allow, sometimes even after restart it works butthenafter abreak I find it will not allow typing again!
any ideas

connected via usb/wacom... software=10.5.8
thanks

Works only after runningDiagnostic

I just set up My computer and Airport extreme. Everything works . When I restart it says no connection and directs me to use the diagnostic after about for screens it detects the network and everything is fine. What can I do to resolve this?

forget the diagnostics and launch airport utility and if a yellow button is showing, double click it and read what it says to correct.

Exporting jpgs worked only after restart

Hi!
What I did:
- Exported some RAWs to JPGs with constrained size. Worked as expected. (Don't know wheter this has something to do with the following:)
- Exported some RAWs to JPGs with full size. The JPGs appeared just for 0.5 seconds in the export folder, den disappeared. After the export, LR said "Error during export. Ignore/Show". No hint what went wrong.
- When I then exported the same RAWs with constrained size 1000x1000, it worked! When changing the size to 1500x1500 or more, I got the same error message again.
- Then I closed LR and started it again. Interesting: I had the same collection of error-RAWs again ;-) Then I tried the full size export again, and it worked.
Strange bug.
Bye . . . Joerg

Hi!
Sorry: Notebook HP Compaq nc9420; Intel Core Duo 1,8 GHz, 1,5 GByte Mem, HDD 80 GB, Windows XP Pro, ATI X1600 with 1680x1050 TFT, LR 1.0 installed after deinstalling Beta 4.1; library moved several times.
Exporting sRGB, no watermark, full metadata (did not try other options here)
Bye . . . Joerg

USB modem works only after reinserting twice.

I have a strange issue with my Arch Linux setup and ZTE WCDMA modem. I recently bought this modem and trying to connect to internet through wvdial. I initially thought that modem is not being detected under Arch Linux (as it was working fine under Ubuntu and Fedora). Later on I understood that the vendor/ product id is changing when I reinsert the modem. For example, When I insert the modem immedietly after boot, the following is shown as vendor/ product id and modem does not connect to internet:-
[sundar@arch ~]$ sudo lsusb
Bus 001 Device 008: ID 19d2:fff5 ZTE WCDMA Technologies MSM
Then I have to remove and reinsert the modem. This time device indicator (kde) and dolphin will show as another partition and vendor/ product id will change to following:-
Bus 001 Device 007: ID 19d2:fff1 ZTE WCDMA Technologies MSM
And without any issue modem will connect to the internet through wvdial. How do I over come this issue and connect to internet directly without removing modem?

Any idea?

Net works only after running "dhcpcd eth0" : Kernel 2.6.27

Similar Messages

Maybe you are looking for