NETApp and Cisco 5000s

I am in the designing stages of a data center where we want to use NEXUS 5000s, NETApps 3140s and NEXUS 2232s for FC0E. From my understanding these devices inter operate like so:
Servers will have converged NICS that use normal CAT 6 to connect to the 2332s
The cabling between the 5ks and the 2ks will be FET (fabric extender transciever)
The cabling between the 7ks and the 5ks is TWINAX
So my question would be how does the NETAPP interoperate with the 5Ks? What is the cabling? Someone asked me if I was going to use a storage access layer device wi the NETAPPs. Is that necessary? Recommended?
Thanks for any help or advice you can give,
P.

1) The NetApp Target CNA's support attachment via SFP+ and fiber optics or via twinax cable.
Note that this depends on which part you've got installed :
X1139A-R6 - fiber (QLE8142)
X1140A-R6 - copper (QLE8152)
2) For interoperability and some configuration examples please refer to the following documents.
NetApp Interoperability Matrix Tool (IMT)
https://now.netapp.com/NOW/products/interoperability/
Fibre Channel over Ethernet (FCoE) End-to-End Deployment Guide
http://media.netapp.com/documents/TR-3800.pdf

Similar Messages

  • DAC cable between HP Flex-10 and Cisco 4900M

    We have HP C7000/VC-Flex 10 Module that I would like to connect to our Netapps NFS datastore.  The Cisco switch that I will be using between HP Flex-10 and Netapps is Cisco 4900M.  I have a HP cable AP784A direct attach copper SFP+ to SFP+.  Which module I need to purchase and insert into my 4900M to support 10Gb connectivity via HP DAC 10Gb cable.
    Please Advise!

    You need
    4900M 4 port 10GE half card with X2 interfaces (WS-X4904-10GE)
        OR
    4900M 8 port 10GE half card with X2 interfaces (WS-X4908-10GE)
    WITH
    Cisco OneX Converter Module Converts an X2 Interface into One SFP+ Interface (CVR-X2-SFP10G)
    I would recommend you to use following DAC cables from Cisco.
    • SFP-H10GB-CU1M: 10GBASE-CU SFP+ Cable 1 meter (Version -02)
    • SFP-H10GB-CU3M: 10GBASE-CU SFP+ Cable 3 meter (Version -02)
    • SFP-H10GB-CU5M: 10GBASE-CU SFP+ Cable 5 meter (Version -02)

  • Routing issue between Cisco Nexus and Cisco 4510 R+E Chassis

    We have configured Cisco Nexus 7K9 as core and Cisco 4510 R+E as access switches for Server connectivity.
    We are experiencing problem in terms of ARP learning and Ping issues between Cisco Nexus and end hosts.

    Hi,
    So you have N7k acting as L3 with servers connected to 4510?.
    Do you see the MAC associated with failing ARP in 4510?. Is it happening with all or few servers?. Just to verify if it is connectivity issue between N7k and 4510, you can configure an SVI on 4510 and assign address from same raneg (server/core range) and perform a ping.
    This will help narrow down if issue is between server to 4510 or 4510 to N7k.
    Thanks,
    Nagendra

  • Mavericks VPN dropouts with native VPN client and Cisco IPSec

    Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
    I am connecting via a WIFI router to a remote VPN server
    The conenction is good for a while but eventually it drops out.
    I had Zero issues in mountain lion and only have issues since the update to 10.9
    I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
    My thoughts are:
    1 -issue with mavericks  ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
    2- Issue with  cisco router compaitibility or timing with Cisco IPSEC
    3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
    Any thousuggestions?

    Since update to Maverics I am experiencing VPN dropouts with native VPN client and Cisco IPSec
    I am connecting via a WIFI router to a remote VPN server
    The conenction is good for a while but eventually it drops out.
    I had Zero issues in mountain lion and only have issues since the update to 10.9
    I had similar issues in teh past with an unrelaibel wifi router but i am using a Verizon Fios router and it has worked impecably until mavericks
    My thoughts are:
    1 -issue with mavericks  ( maybe the app sleep funciton affecting eithe VPN or WIFI daemons)
    2- Issue with  cisco router compaitibility or timing with Cisco IPSEC
    3- Issue with WIFI itself on mavericks - some sort of WIFI software bug
    Any thousuggestions?

  • Communication problem between Cisco 3560 and Cisco SG300.

    Dear Support,
    I have a Cisco SG300 and Cisco 3560 switches.
    3560 is my Core Switch and SG300 is access switch.
    From 3560 VLAN information is not passed to SG300.
    3560 Configuration:
    interface GigabitEthernet0/23
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan 1,2,10,11
    switchport mode trunk
    SG300 Configuration:
    interface gigabitethernet49
    spanning-tree link-type point-to-point
    switchport mode general
    switchport general allowed vlan add 2,10-11 tagged
    macro description switch
    Please suggest how this issue is resolve.
    Regards,
    JItesh Mahajan.

    Dear Aleksandra,
    Below Configuration is right or wrong for 3560 and SG300.
    3560 Configuration:
    interface GigabitEthernet0/23
    switchport trunk encapsulation dot1q
    switchport trunk allowed vlan remove VLAN 1
    switchport native vlan 1
    switchport trunk allowed vlan 1,2,10,11
    switchport mode trunk
    SG300 Configuration:
    interface gigabitethernet49
    spanning-tree link-type point-to-point
    switchport mode general
    switchport general allowed vlan add 2,10-11 tagged
    macro description switch
    Regards,
    JItesh Mahajan.

  • Site-to-Site VPN between Cisco ASA 5505 (8.4) and Cisco Router (IOS 15.2)

    Hi, I'm trying to create Site-to-Site VPN between Cisco ASA 5505 and Cisco Router 3945.
    I've tried create configuration with and without ASA wizard, but anyway it doesn't work.
    Please help me to find where is the issue.
    I have two sites and would like to get access from 192.168.83.0 to 192.168.17.0
    192.168.17.0 --- S1.S1.S1.S1 (IOS Router) ==================== S2.S2.S2.S2 (ASA 5505) --- 192.168.83.0
    Here is my current configuration.
    Thanks for your help.
    IOS Configuration
    version 15.2
    crypto isakmp policy 1
    encr aes 256
    authentication pre-share
    group 2
    crypto isakmp key cisco address 198.0.183.225
    crypto isakmp invalid-spi-recovery
    crypto ipsec transform-set AES-SET esp-aes esp-sha-hmac
    mode transport
    crypto map static-map 1 ipsec-isakmp
    set peer S2.S2.S2.S2
    set transform-set AES-SET
    set pfs group2
    match address 100
    interface GigabitEthernet0/0
    ip address S1.S1.S1.S1 255.255.255.240
    ip nat outside
    ip virtual-reassembly in
    duplex auto
    speed auto
    crypto map static-map
    interface GigabitEthernet0/1
    ip address 192.168.17.1 255.255.255.0
    ip nat inside
    ip virtual-reassembly in
    duplex auto
    speed auto
    access-list 100 permit ip 192.168.17.0 0.0.0.255 192.168.83.0 0.0.0.255
    ASA Configuration
    ASA Version 8.4(3)
    interface Ethernet0/0
    switchport access vlan 2
    interface Vlan1
    nameif inside
    security-level 100
    ip address 192.168.83.1 255.255.255.0
    interface Vlan2
    nameif outside
    security-level 0
    ip address S2.S2.S2.S2 255.255.255.248
    ftp mode passive
    same-security-traffic permit intra-interface
    object network inside-network
    subnet 192.168.83.0 255.255.255.0
    object network datacenter
    host S1.S1.S1.S1
    object network datacenter-network
    subnet 192.168.17.0 255.255.255.0
    object network NETWORK_OBJ_192.168.83.0_24
    subnet 192.168.83.0 255.255.255.0
    access-list outside_access_in extended permit icmp any any echo-reply
    access-list outside_access_in extended deny ip any any log
    access-list outside_cryptomap extended permit ip 192.168.83.0 255.255.255.0 object datacenter-network
    pager lines 24
    logging enable
    logging asdm informational
    mtu inside 1500
    mtu outside 1500
    ip local pool vpn_pool 192.168.83.200-192.168.83.254 mask 255.255.255.0
    icmp unreachable rate-limit 1 burst-size 1
    no asdm history enable
    arp timeout 14400
    nat (inside,outside) source dynamic inside-network interface
    nat (inside,outside) source static inside-network inside-network destination static inside-network inside-network no-proxy-arp route-lookup
    nat (inside,outside) source static inside-network inside-network destination static datacenter-network datacenter-network no-proxy-arp route-lookup
    nat (inside,outside) source static NETWORK_OBJ_192.168.83.0_24 NETWORK_OBJ_192.168.83.0_24 destination static datacenter-network pdatacenter-network no-proxy-arp route-lookup
    access-group outside_access_in in interface outside
    route outside 0.0.0.0 0.0.0.0 DEFAULT_GATEWAY 1
    crypto ipsec ikev1 transform-set vpn-transform-set esp-3des esp-sha-hmac
    crypto ipsec ikev1 transform-set vpn-transform-set mode transport
    crypto ipsec ikev1 transform-set L2L_SET esp-aes esp-sha-hmac
    crypto ipsec ikev1 transform-set L2L_SET mode transport
    crypto dynamic-map dyno 10 set ikev1 transform-set vpn-transform-set
    crypto map vpn 1 match address outside_cryptomap
    crypto map vpn 1 set pfs
    crypto map vpn 1 set peer S1.S1.S1.S1
    crypto map vpn 1 set ikev1 transform-set L2L_SET
    crypto map vpn 20 ipsec-isakmp dynamic dyno
    crypto map vpn interface outside
    crypto isakmp nat-traversal 3600
    crypto ikev1 enable outside
    crypto ikev1 policy 10
    authentication pre-share
    encryption 3des
    hash sha
    group 2
    lifetime 86400
    crypto ikev1 policy 20
    authentication pre-share
    encryption aes-256
    hash sha
    group 2
    lifetime 86400
    group-policy GroupPolicy_S1.S1.S1.S1 internal
    group-policy GroupPolicy_S1.S1.S1.S1 attributes
    vpn-tunnel-protocol ikev1
    group-policy remote_vpn_policy internal
    group-policy remote_vpn_policy attributes
    vpn-tunnel-protocol ikev1 l2tp-ipsec
    username artem password 8xs7XK3To4s5WfTvtKAutA== nt-encrypted
    username admin password rqiFSVJFung3fvFZ encrypted privilege 15
    tunnel-group DefaultRAGroup general-attributes
    address-pool vpn_pool
    default-group-policy remote_vpn_policy
    tunnel-group DefaultRAGroup ipsec-attributes
    ikev1 pre-shared-key *****
    tunnel-group DefaultRAGroup ppp-attributes
    authentication ms-chap-v2
    tunnel-group S1.S1.S1.S1 type ipsec-l2l
    tunnel-group S1.S1.S1.S1 general-attributes
    default-group-policy GroupPolicy_S1.S1.S1.S1
    tunnel-group S1.S1.S1.S1 ipsec-attributes
    ikev1 pre-shared-key *****
    class-map inspection_default
    match default-inspection-traffic
    policy-map type inspect dns preset_dns_map
    parameters
      message-length maximum client auto
      message-length maximum 512
    policy-map global_policy
    class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect rsh
      inspect rtsp
      inspect esmtp
      inspect sqlnet
      inspect skinny
      inspect sunrpc
      inspect xdmcp
      inspect sip
      inspect netbios
      inspect tftp
      inspect ip-options
      inspect icmp
    service-policy global_policy global
    prompt hostname context
    no call-home reporting anonymous
    Cryptochecksum:f55f10c19a0848edd2466d08744556eb
    : end

    Thanks for helping me again. I really appreciate.
    I don't hve any NAT-exemptions in Cisco IOS Router. Transform-set I will change soon, but I've tried with tunnel mode and it didn't work.
    Maybe NAT-exemptions is the issue. Can you advice me which exemptions should be in Cisco IOS Router?
    Because on Cisco ASA I guess I have everything.
    Here is show crypto session detail
    router(config)#do show crypto session detail
    Crypto session current status
    Code: C - IKE Configuration mode, D - Dead Peer Detection
    K - Keepalives, N - NAT-traversal, T - cTCP encapsulation
    X - IKE Extended Authentication, F - IKE Fragmentation
    Interface: GigabitEthernet0/0
    Session status: DOWN
    Peer: 198.0.183.225 port 500 fvrf: (none) ivrf: (none)
          Desc: (none)
          Phase1_id: (none)
      IPSEC FLOW: permit ip 192.168.17.0/255.255.255.0 192.168.83.0/255.255.255.0
            Active SAs: 0, origin: crypto map
            Inbound:  #pkts dec'ed 0 drop 0 life (KB/Sec) 0/0
            Outbound: #pkts enc'ed 0 drop 0 life (KB/Sec) 0/0
    Should I see something in crypto isakmp sa?
    pp-border#sh crypto isakmp sa
    IPv4 Crypto ISAKMP SA
    dst             src             state          conn-id status
    IPv6 Crypto ISAKMP SA
    Thanks again for your help.

  • Transfer VOIP Calls Between Cisco Desk Phone and Cisco Jabber For IPhone 9.5

    Does anyone know how to transfer an active voip call from a Cisco IP Desk Phone to Cisco Jabber for IPhone?  I can transfer a call from Cisco Jabber for IPhone to my Cisco IP Desk Phone no problem.  I put the call on hold and then click "Resume" on my Cisco IP Desk Phone.  However I cannot do the same but the other way around.  If I put the call on hold on my Cisco IP Desk Phone, I see "no active call" on my Jabber client.  The only information I could find slighlty relevant was using the Mobility Key/Remote Destination Profile feature however this defeats the object as this will forward to an external number, e.g. mobile and I just want to transfer the call within the VOIP environment between the two devices that are using the same directory number.
    I am using Cisco Call Manager 9.1(2), Cisco Presence 9.1 and Cisco Jabber for IPhone 9.5.
    Any help would be greatly appreciated.
    Kind Regards,
    Paul Parker.

    Did you ever find an answer to this ?
    I am seeing the same behavior and trying so see if I can put calls on hold and pick them up both ways also.
    The only answer I seem to have found is to use park instead
    That would/should work but I would just prefer to hold/unhold
    Just not sure why we would not be able to hold/unhold on what is essentially a "shared" line
    Does anyone have this working for them ?

  • Cisco ISE 1.2 and Cisco ACS 5.4 patch 6 and support for snmp version 3

    does anyone know if cisco ISE version 1.2 patch 8 and Cisco ACS 5.4 patch 6 support snmp version 3?
    ciscoISE/admin(config)# snmp-server ?
      community  Set community string
      contact    Text for mib object sysContact
      host       Specify hosts to receive SNMP notifications
      location   Text for mib object sysLocation
    ciscoISE/admin(config)# snmp-server
    Ciscoacs/admin(config)# snmp-server ?
      community  Set community string
      contact    Text for mib object sysContact
      host       Specify hosts to receive SNMP notifications
      location   Text for mib object sysLocation
    Ciscoacs/admin(config)# snmp-server

    No support SNMP v3 on ISE v1.2 and 1.3 except for profilling
    http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/cli_ref_guide/ise_cli/ise_cli_app_a.html#12768
     http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/cli_ref_guide/b_ise_CLIReferenceGuide/b_ise_CLIReferenceGuide_chapter_0100.html#ID-1364-00000d30

  • Problem VOFR cisco 3810 and Cisco 1750

    -I have a network with equipment 3810 Cisco and Cisco 1750 in topology in stars.
    -The router central is a Cisco 3810 wthin a E1 connected to PBX
    - other router in the network, have fxs wthin two port
    - the network this working with vofr
    - the problem is: from an equipment 1750 I can call to a Cisco 3810 but from an equipment 3810 I can not to a cisco 1750.
    - but if I place debug in Cisco 1750 ( debug voice ccaip inout) I watch that the call this arriving
    - the configurations de routers is OK
    - please it can help me

    ---------------Debug voice ccaip inout-----------------------------------
    ARBORAL-R#
    ARBORAL-R#
    ARBORAL-R#ter moni
    ARBORAL-R#
    *Mar 4 00:01:59.358: cc_api_call_setup_ind (vdbPtr=0x810920C0, callInfo={called=6250,called_oct3=0x0,calling=,calling_oct3=0x0,subscriber_type_str=Unknown,
    fdest=1 peer_tag=0},callID=0x80FF6BB4)
    *Mar 4 00:01:59.358: cc_api_call_setup_ind type 0 , prot 11
    *Mar 4 00:01:59.362: cc_process_call_setup_ind (event=0x81093FA8) handed call to app "DEFAULT"
    *Mar 4 00:01:59.362: sess_appl: ev(23=CC_EV_CALL_SETUP_IND), cid(1), disp(0)
    *Mar 4 00:01:59.362: sess_appl: ev(SSA_EV_CALL_SETUP_IND), cid(1), disp(0)
    *Mar 4 00:01:59.362: ccCallSetContext (callID=0x1, context=0x81074A5C)
    *Mar 4 00:01:59.366: ssaCallSetupInd finalDest cllng(), clled(6250)
    *Mar 4 00:01:59.366: ssaSetupPeer cid(1) peer list: tag(6250) called number (6250) tag(1) called number (6250)
    *Mar 4 00:01:59.366: ssaSetupPeer rotary_dialpeer_status(1)
    *Mar 4 00:01:59.366: ssaSetupPeer cid(1), destPat(6250), matched(4), prefix(), peer(81213410), peer->encapType (1)
    *Mar 4 00:01:59.366: ccCallProceeding (callID=0x1, prog_ind=0x0)
    *Mar 4 00:01:59.366: ccCallSetupRequest (Inbound call = 0x1, outbound peer =6250, dest=, params=0x81074A70 mode=0, *callID=0x8109F780)
    *Mar 4 00:01:59.366: ccCallSetupRequest numbering_type 0x0
    *Mar 4 00:01:59.366: dest pattern 6250, called 6250, digit_strip 1
    *Mar 4 00:01:59.370: callingNumber=, calledNumber=6250, redirectNumber=
    *Mar 4 00:01:59.370: accountNumber=, pinNumber=
    *Mar 4 00:01:59.370: finalDestFlag=1, guid=06e4.bc49.8945.19b9.0000.0000.fdc3.ac59
    *Mar 4 00:01:59.370: peer_tag=6250
    *Mar 4 00:01:59.370: ccIFCallSetupRequestPrivate: (vdbPtr=0x81069AF4, dest=, callParams={called=6250,called_oct3=0x0, calling=,calling_oct3=0x0, subscriber_type_str=Unknown, fdest=1, voice_peer_tag=6250},mode=0x0) vdbPtr type = 6
    *Mar 4 00:01:59.370: ccIFCallSetupRequestPrivate: (vdbPtr=0x81069AF4, dest=, callParams={called=6250, called_oct3 0x0,
    calling=,calling_oct3 0x0,fdest=1, voice_peer_tag=6250}, mode=0x0)
    *Mar 4 00:01:59.370: ccSaveDialpeerTag (callID=0x1, dialpeer_tag=
    *Mar 4 00:01:59.370: ccCallSetContext (callID=0x2, context=0x810C043C)
    *Mar 4 00:01:59.378: cc_api_call_proceeding(vdbPtr=0x81069AF4, callID=0x2,
    prog_ind=0x0)
    *Mar 4 00:01:59.378: cc_api_call_alert(vdbPtr=0x81069AF4, callID=0x2, prog_ind=0x8, sig_ind=0x1)
    *Mar 4 00:01:59.378: sess_appl: ev(20=CC_EV_CALL_PROCEEDING), cid(2), disp(0)
    *Mar 4 00:01:59.378: cid(2)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_PROCEEDING)
    oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(0)fDest(0)
    *Mar 4 00:01:59.382: -cid2(1)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_MAPPING)
    *Mar 4 00:01:59.382: ssaIgnore cid(2), st(SSA_CS_CALL_SETTING),oldst(1), ev(20)
    *Mar 4 00:01:59.382: sess_appl: ev(7=CC_EV_CALL_ALERT), cid(2), disp(0)
    *Mar 4 00:01:59.382: cid(2)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_ALERT)
    oldst(SSA_CS_CALL_SETTING)cfid(-1)csize(0)in(0)fDest(0)
    *Mar 4 00:01:59.382: -cid2(1)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_MAPPING)
    *Mar 4 00:01:59.382: ccCallAlert (callID=0x1, prog_ind=0x8, sig_ind=0x1)
    *Mar 4 00:01:59.382: ccConferenceCreate (confID=0x8109F7F8, callID1=0x1, callID2=0x2, tag=0x0)
    *Mar 4 00:01:59.382: cc_api_bridge_done (confID=0x1, srcIF=0x810920C0, srcCallID=0x1, dstCallID=0x2, disposition=0, tag=0x0)
    *Mar 4 00:01:59.386: cc_api_bridge_done (confID=0x1, srcIF=0x81069AF4, srcCallID=0x2, dstCallID=0x1, disposition=0, tag=0x0)
    *Mar 4 00:01:59.386: cc_api_caps_ind (dstVdbPtr=0x810920C0, dstCallId=0x1, srcCallId=0x2,
    caps={codec=0xEBFB, fax_rate=0x7F, vad=0x3, modem=0x2
    codec_bytes=0, signal_type=3})
    *Mar 4 00:01:59.386: cc_api_caps_ind (Playout: mode 0, initial 56068,min 33034, max 5688)
    *Mar 4 00:01:59.386: cc_api_caps_ind (dstVdbPtr=0x81069AF4, dstCallId=0x2, srcCallId=0x1,
    caps={codec=0x8, fax_rate=0x2, vad=0x2, modem=0x1
    codec_bytes=30, signal_type=2})
    *Mar 4 00:01:59.386: cc_api_caps_ind (Playout: mode 0, initial 0,min 0, max 0)
    *Mar 4 00:01:59.386: cc_api_caps_ack (dstVdbPtr=0x81069AF4, dstCallId=0x2, srcCallId=0x1,
    caps={codec=0x8, fax_rate=0x2, vad=0x2, modem=0x1
    codec_bytes=30, signal_type=2})
    *Mar 4 00:01:59.386: cc_api_caps_ack (dstVdbPtr=0x810920C0, dstCallId=0x1, srcCallId=0x2,
    caps={codec=0x8, fax_rate=0x2, vad=0x2, modem=0x1
    codec_bytes=30, signal_type=2})
    *Mar 4 00:01:59.390: cc_api_call_disconnected(vdbPtr=0x81069AF4, callID=0x2, cause=0xAC)
    *Mar 4 00:01:59.390: sess_appl: ev(28=CC_EV_CONF_CREATE_DONE), cid(1), disp(0)
    *Mar 4 00:01:59.390: cid(1)st(SSA_CS_CONFERENCING_ALERT)ev(SSA_EV_CONF_CREATE_DONE)
    oldst(SSA_CS_MAPPING)cfid(1)csize(0)in(1)fDest(1)
    *Mar 4 00:01:59.390: -cid2(2)st2(SSA_CS_CONFERENCING_ALERT)oldst2(SSA_CS_CALL_SETTING)
    *Mar 4 00:01:59.390: sess_appl: ev(12=CC_EV_CALL_DISCONNECTED), cid(2), disp(0)
    *Mar 4 00:01:59.394: cid(2)st(SSA_CS_CONFERENCED_ALERT)ev(SSA_EV_CALL_DISCONNECTED)
    oldst(SSA_CS_CALL_SETTING)cfid(1)csize(0)in(0)fDest(0)
    *Mar 4 00:01:59.394: -cid2(1)st2(SSA_CS_CONFERENCED_ALERT)oldst2(SSA_CS_CONFERENCING_ALERT)
    *Mar 4 00:01:59.394: ssaDisconnectedAlert: redirect_numbers(0)
    *Mar 4 00:01:59.394: ccConferenceDestroy (confID=0x1, tag=0x0)
    *Mar 4 00:01:59.394: cc_api_bridge_drop_done (confID=0x1, srcIF=0x810920C0, srcCallID=0x1, dstCallID=0x2, disposition=0 tag=0x0)
    *Mar 4 00:01:59.394: cc_api_bridge_drop_done (confID=0x1, srcIF=0x81069AF4, srcCallID=0x2, dstCallID=0x1, disposition=0 tag=0x0)
    *Mar 4 00:01:59.394: sess_appl: ev(29=CC_EV_CONF_DESTROY_DONE), cid(1), disp(0)
    *Mar 4 00:01:59.394: cid(1)st(SSA_CS_ALERT_DISC_CONF_DESTROYING)ev(SSA_EV_CONF_DESTROY_DONE)
    oldst(SSA_CS_CONFERENCING_ALERT)cfid(1)csize(0)in(1)fDest(1)
    *Mar 4 00:01:59.398: -cid2(2)st2(SSA_CS_ALERT_DISC_CONF_DESTROYING)oldst2(SSA_CS_CONFERENCED_ALERT)
    *Mar 4 00:01:59.398: ssa: Disconnected cid(2) state(11) cause(0xAC)
    *Mar 4 00:01:59.398: ssaCallDisconnectAlert: cid(2), peer-cid(1)
    *Mar 4 00:01:59.398: ccCallDisconnect (callID=0x2, cause=0xAC tag=0x0)
    *Mar 4 00:01:59.402: cc_api_call_disconnect_done(vdbPtr=0x81069AF4, callID=0x2, disp=0, tag=0x0)
    *Mar 4 00:01:59.402: sess_appl: ev(13=CC_EV_CALL_DISCONNECT_DONE), cid(2), disp(0)
    *Mar 4 00:01:59.402: cid(2)st(SSA_CS_ALERT_DISC_DISCONNECTING)ev(SSA_EV_CALL_DISCONNECT_DONE)
    oldst(SSA_CS_CONFERENCED_ALERT)cfid(-1)csize(0)in(0)fDest(0)
    *Mar 4 00:01:59.402: -cid2(1)st2(SSA_CS_ALERT_DISC_DISCONNECTING)oldst2(SSA_CS_ALERT_DISC_CONF_DESTROYING)
    *Mar 4 00:01:59.406: ssaDisconnectDone: Rotary Retry cid(1) peer list: tag(1) called number (6250)
    *Mar 4 00:01:59.406: ssaSetupPeer cid(1) peer list: tag(1) called number (6250)
    *Mar 4 00:01:59.406: ssaSetupPeer rotary_dialpeer_status(2)
    *Mar 4 00:01:59.406: ssaSetupPeer cid(1), destPat(6250), matched(0), prefix(), peer(81211DC4), peer->encapType (5)
    *Mar 4 00:01:59.406: ccCallProceeding (callID=0x1, prog_ind=0x0)
    *Mar 4 00:01:59.406: ccCallSetupRequest (Inbound call = 0x1, outbound peer =1, dest=, params=0x81074A70 mode=0, *callID=0x8109F7C0)
    *Mar 4 00:01:59.406: ccCallSetupRequest numbering_type 0x0
    *Mar 4 00:01:59.406: dest pattern ...., called 6250, digit_strip 0
    *Mar 4 00:01:59.406: callingNumber=, calledNumber=6250, redirectNumber=
    *Mar 4 00:01:59.406: accountNumber=, pinNumber=
    *Mar 4 00:01:59.410: finalDestFlag=1, guid=06e4.bc49.8945.19b9.0000.0000.fdc3.ac59
    *Mar 4 00:01:59.410: peer_tag=1
    *Mar 4 00:01:59.410: ccIFCallSetupRequestPrivate: (vdbPtr=0x810920C0, dest=, callParams={called=6250,called_oct3=0x0, calling=,calling_oct3=0x0, subscriber_type_str=Unknown, fdest=1, voice_peer_tag=1},mode=0x0) vdbPtr type = 11
    *Mar 4 00:01:59.410: ccSaveDialpeerTag (callID=0x1, dialpeer_tag=
    *Mar 4 00:01:59.410: ccCallSetContext (callID=0x3, context=0x810C0D90)
    *Mar 4 00:01:59.458: cc_api_call_proceeding(vdbPtr=0x810920C0, callID=0x3,
    prog_ind=0x8)
    *Mar 4 00:01:59.462: sess_appl: ev(20=CC_EV_CALL_PROCEEDING), cid(3), disp(0)
    *Mar 4 00:01:59.462: cid(3)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_PROCEEDING)
    oldst(SSA_CS_MAPPING)cfid(-1)csize(0)in(0)fDest(0)
    *Mar 4 00:01:59.462: -cid2(1)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_ALERT_DISC_CONF_DESTROYING)
    *Mar 4 00:01:59.462: ssaIgnore cid(3), st(SSA_CS_CALL_SETTING),oldst(1), ev(20)
    *Mar 4 00:01:59.466: cc_api_call_disconnected(vdbPtr=0x810920C0, callID=0x3, cause=0x3)
    *Mar 4 00:01:59.466: sess_appl: ev(12=CC_EV_CALL_DISCONNECTED), cid(3), disp(0)
    *Mar 4 00:01:59.466: cid(3)st(SSA_CS_CALL_SETTING)ev(SSA_EV_CALL_DISCONNECTED)
    oldst(SSA_CS_CALL_SETTING)cfid(-1)csize(0)in(0)fDest(0)
    *Mar 4 00:01:59.466: -cid2(1)st2(SSA_CS_CALL_SETTING)oldst2(SSA_CS_ALERT_DISC_CONF_DESTROYING)
    *Mar 4 00:01:59.466: ssa: Disconnected cid(3) state(1) cause(0x3)
    *Mar 4 00:01:59.470: ccCallDisconnect (callID=0x3, cause=0x3 tag=0x0)
    *Mar 4 00:01:59.470: ccCallDisconnect (callID=0x1, cause=0x3 tag=0x0)
    *Mar 4 00:01:59.470: cc_api_call_disconnect_done(vdbPtr=0x810920C0, callID=0x3, disp=0, tag=0x0)
    *Mar 4 00:01:59.470: sess_appl: ev(13=CC_EV_CALL_DISCONNECT_DONE), cid(3), disp(0)
    *Mar 4 00:01:59.474: cid(3)st(SSA_CS_DISCONNECTING)ev(SSA_EV_CALL_DISCONNECT_DONE)
    oldst(SSA_CS_CALL_SETTING)cfid(-1
    ARBORAL-R#
    ARBORAL-R#
    ARBORAL-R#

  • RSA SecurID and Cisco ACS integration for user(s) with enable mode

    I thought I had this problem figured out but I guess not.
    I have a Cisco 2621 router with IOS 12.2(15)T17. Behind the
    router is a Gentoo linux, RSA SecurID 6.1 and Cisco ACS 3.2.
    I use tacacs+ authentication for logging into the Cisco router
    such as telnet and ssh. In the ACS I use "external user databases"
    for authentication which proxy the request from the ACS over
    to the RSA SecurID Server. I installed RSA Agents with
    sdconf.rec file on the Cisco ACS server. I renamed "user group 1"
    to be "RSA_SecurID" group. In the "External user databases" and
    "database configurations" I assign SecurID to this "RSA_SecurID"
    group.
    Everything is working fine. In the "User Setup" I can see dynamic
    user test1, test2,...testn listed in there as "dynamic users". In
    other words, I can telnet into the router with my two-factor
    SecurID.
    The problem is that if test1 wants to go into "enable" mode with
    SecurID login, I have to go into "test1" user setting and select
    "TACACS+Enable Password" and choose "Use external database password".
    After that, test1 can go into enable mode with his/her SecurID
    credential.
    Well, this works fine if I have a few users. The problem is that
    I have about 100 users that I need to do this. The solution is
    clearly not scalable. Is there a setting from group level that
    I can do this?
    Any ACS "experts" want to help me out here? Thanks.

    That is not what I want. I want user "test1" to be able to do this:
    C
    Username: test1
    Enter PASSCODE:
    C2960>en
    Enter PASSCODE:
    C2960#
    In other words, test1 user has to type in his/her RSA token password to get
    into exec mode. After that, he/she has to use the RSA token password to
    get into enable mode. Each user can get into "enable" mode with his/her
    RSA token mode.
    The way you descripbed, it seemed like anyone in this group can go directly
    into enable mode without password. This is not what I have in mind.
    Any other ideas? Thanks.

  • What is the difference in the features between Cisco prime 1.2 and Cisco prime 1.4 ?

    Dears,
    Please i need to know what is the difference in the features between Cisco prime infrastructure 1.2 and Cisco prime 1.4.
    Already i see the release note for each one but the release indicate only the New feature for every one. so i need to know the difference between them not new features.
    Wait your kind feedback plz
    Regards,

    Hi,
    New Features and Enhancements
    The following topics describe new features and enhancements in Cisco Prime Infrastructure 1.4.
    Management Support for WLC Release 7.5
    Support for 802.11ac Module
    Support for Cisco AP 700
    Policy Classification Engine
    FlexConnect Audit Support
    Autonomous AP Support
    Client Stateful Switchover
    Cable Modem Monitoring
    Support for Secure File Transfer Protocol
    and please go through the link and check the data sheet for further clearance.
    http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/prime-infrastructure/datasheet-c78-729879.html

  • Cisco Call Manager 5.1 and Cisco VoIP Gateways

    Hi,
    I have Cisco Call Manager 5.1 with Cisco 2800 series routers as a ISDN gateways and Cisco VG224/ATA 186 as POTS gateways. While Cisco Call Manager collects call statistics from 7900 series SCCP handsets managed by the Call Manager (number of VoIP packets, dropped frames etc.), it shows only one side of the call as it does not collect statistics from the Cisco routers (configured as H.323 gateways), the Cisco VG224 (with ports configured as H.323 gateways and as a SCCP devices) and Cisco ATA 186 (configured for SCCP).
    Is the collection of these statistics possible? What needs to be done?
    Thanks,
    Paul

    Update: Logging of QoS/Call Management Records (CMR) to Call Manager CDR database is not possible with H.323 gateways; only MGCP gateways:
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_qanda_item09186a008020650a.shtml#qa4
    Anyone know how to get the Cisco router gateway to log these statistics anyway using standard router logging mechanisms (e.g. syslog)?
    Anyone know about calls to SCCP ports on Cisco VG224 or ATA 186?
    Thanks,
    Paul

  • Since I upgraded to Lion, my RSA securid token and Cisco VPN client doesn't work any longer. Anyone have suggestions on how to fix that?

    Since upgrading to Lion, I can no longer use VPN because my RSA securid token and CIsco VPN Client won't load. Any suggestioins out there?

    .

  • Cisco Prime network and cisco prime infrastructure

    Hi,
    What is the difference between Cisco Prime Network and Cisco Prime infrastructure.
    Please advice.

    I assume you are asking about Cisco Prime LAN Management System (LMS) vs. Cisco Prime Infrastructure (PI).
    LMS is currently the leading Cisco offering for wired infrastructure management. It is the evolution of the earlier CiscoWorks LMS, CiscoWorks RWAN CiscoWorks 2000, CWSI, VLAN Director, original CiscoWorks classic etc. products going back almost 20 years.
    PI is the equivalent Cisco offering for wireless LANs and is the successor to NCS and WCS products.
    The overlap and confusion comes from the fact the Cisco is positioning PI as the overall wireless and wired management platform and gradually introducing wired network management features to make it equal (and eventually exceed) LMS's capabilities.
    There is a comparison table here that shows the current differences. A major new release of PI (2.0) is due out shortly which will close many (but not all) of the gaps on that table.

  • RedHat Enterprise Cluster and Cisco IGMP Snooping/Querying

    Has anyone else had any experience with IGMP Snooping/Querying and RedHat Enterprise Cluster?
    We have been experiencing a large amount of problems with this functionality.
    We are running IGMP Querying in our environment and we recently set up a second querier.
    Here's the steps we took
    Existing querier:  192.168.3.248
    Everything was running fine.
    Added a new querier on a different switch: 192.168.3.247
    At this point, all of our RedHat Enterprise Clusters fenced themselves and needed to be restarted in order to restore
    access.  In order to restart the RedHat Enterprise Clusters, the physical servers must be rebooted.
    Are there any known issues with RedHat Enterprise Clustering and Cisco Switches (3750
    series)?  I would expect the querier change to be seamless, but it does not seem that this
    is the case. 

    Hi,
    In our organizaiton we have Red Hat Cluster with 2 cisco switch (Model: cisco WS-C2960S-24TD-L, Version: "flash:/ c2960s-universalk9-mz.122-55.SE3/c2960s-universalk9-mz.122-55.SE3.bin").
    - We are using HP Chassis c7000 and Server is on the chassis. There are 2 service IC & Med. Each server has one service primary and other secondary running.
    - The two cluster switches are connected each other with Ether channer trunk (1+1) link. Also these 2 switches are connected to our Mgmt switch for Server Admin access to HP Chassis via OA port. The Red Hat system has cluster lan (pri & sec) & OA lan (01 & 02 of HP chassis) connected to Cluster switches. The Mgmt VLAN is 501 - 172.31.10.0/24.
    Problem:
    When the CluserSW01 goes down the cluser shifted to CluseterSW02 with Cluser_Secondary_LAN and OA2. But when the ClusterSW01 switch comes again than the communication breaks and cluster don come up.
    I was thinking this is either STP or IGMP, well sure though. As these are production systems hence we also couldn't do much more test as well.
    If you have face any such issue or have experience with it or know what the problem might be... kindly share with me.
    Thanks,
    Adnan

Maybe you are looking for

  • How to remove WT split

    Dear Experts, I have a query on WT split which is present in RT after payroll process and due to two record are present in the WPBP cluster table. My problem is I have one Custom WT for storing the Excess Super ann amount so I had written the PCR for

  • Import/Export in 8i

    Hi, I m using Oracle 8i and EXP/IMP command to Export/Import all my data. Daily, I have to import my data in other computer, it takes many hours, as I have to delete all data first, then import all the data again. I want to insert only new/updated da

  • My wife's Iphone 4 shows an excessive number of emails after trash has been emptied.  What is the fix for this?

    My wife recently emptied her email trash.  All emails were deleted, the Email icon shows a number of almost 4,000 emails.  Since trash is definately empty, how can this excessive and false number be removed? Thanks, Bewildered and Wondering!

  • Watermark with multiple rows of text, Is it possible?

    Hi everyone,      One of our clients want the whole page filled with watermark with multiple rows of text, I cannot find related properties on the watermark configuration page, is it possible? Thank you in advance.

  • HT1899 How do i boot to mac after boot camp

    How do i boot back to mac after boot camp? I was in the middle of installing windows 7 when i received an error message saying the partition needs to be in a diff format ( NFTS ). I tried restarting my mac but now its saying "no bootable device - ins