Netapp plugin for Grid 10.2.0.4

hi,
I read on OTN that the plugin for Netapp was incorporated into Grid control R2 and R3. I've a 10.2.0.4 version. Is the plugin also incorporated in R4? If so, how do I navigate to the storage page. I could not find any information on storage within grid control. If the plugin is not incorporated, where can I download the plugin? Could not find it on OTN.
Thanks.

If you go to an agent homepage (click Setup in the top right, click on Agents in the blue bar, select an agent from the table), there will be a table of instances the agent monitors. Above that table and justified to the right side is a pull down list. This pull down allows you to select a target type (and the button next to it kicks off manual discovery). The netapp target type will be in this list if the agent supports it.
There may be a white paper with the plugin download from here:
http://www.oracle.com/technology/products/oem/extensions/index.html

Similar Messages

NetApp plugin for OEM 12c - DB is not on NFS mounted storage. DB Storage Perf Report empty

Hi, I have installed NetApp Plugin for OEM 12c (12.1.0.3.1) for a Netapp vFiler used for SMO. "Database Storage Utilization" and "Consolidation Database Storage Performance" empty. "Database is not on NFS mounted storage. Hence, no views available." - a. We are using ASM lun created on NFS. Does this means it will not appear in the plugin report ? - b. If point a. is true, is there a way to make the data appear ? I had already verified the BELOW. Only for point 4, I observed MGMT$DB_DATAFILES."OS_STORAGE_ENTITY" is NA (even though the ASM disk is actually on a NFS mount) : 1. Database discovery is done in EM12c . 2. Go to the database “HOST” target in EM 12c and click on the host target on which database resides. From host target drop down, click on “Host-> StorageDetails”. It will launch the “Storage Details” page. Please refer attached screenshot. There is a table displayed on bottom of screen and click on “File Systems” tab and check that your discovered database storage mount point is shown there. (Please note that whenever you define new mount point on host, this list should reflect the change.), otherwise, Database Performance views will not work. This mount point discovery is updated periodically. (It might be possible that DB views are not working because this discovery might not have finished) 3. Please click on NetApp Storage Target type and go to “Target HomePage drop down ->All Metrics”. Please click on “Volume List” metric and confirm if the volume is listed there on which database resides. 4. If all above steps holds good, please execute the below query on EM 12c repository and send the result: SELECT V2.TARGET_NAME, V1.FILESYSTEM, SUBSTR(V1.FILESYSTEM,INSTR(V1.FILESYSTEM,':')+6, (CASE WHEN (INSTR(V1.FILESYSTEM,'/',1,3) > 0) THEN INSTR(V1.FILESYSTEM,'/',1,3) - INSTR(V1.FILESYSTEM,'/',1,2) - 1 ELSE 100 END)) "VOLUMENAME" FROM MGMT$STORAGE_REPORT_NFS V1, MGMT$DB_DATAFILES V2 WHERE V1.MOUNTPOINT = V2.OS_STORAGE_ENTITY and V2.TARGET_NAME=''

Hi Aik, Change in SQLs will not work. There is lot of code for data discovery.We need to have discovery mechanism integrated in our plug-in for ASM LUNS.ASM LUN based database discovery has been planned to support in future release of plug-ins. Can you please share following details about OEM plug-in usage:1. Company Name2. ONTAP OS (cDOT / 7-mode which version)3. Nature of Databases (Only ASM or NFS based)4. Are your currently using this plug-in for NFS databases? If yes, how it helps to simplify your database administration. We will share your feedback to Product Management for support of ASM. Regards,Sachin Maheshwari

JBOSS Plugin for Grid Control 10.2.0.5

Hi,
I have configured two 4.2.2 JBOSS instances in our 10.2.0.5 grid control. In one JBOSS instance the application is deployed as an EAR file and in the second the application is deployed as a WAR file. The JBOSS instance using the EAR file does not show our EAR file under the Applications link in Grid Control, whereas the JBOSS instance with the WAR file correctly shows our WAR file in the applications link.
Are there any restrictions with the JBOSS plugin and EAR files?
Thanks
Mark

If you have DNS to resolve the host name and ip-address of the OMS server from the agent server thats ok. And the same goes for resolving the host name and ip-address of the OMS server from the server where the agent is installed.
You say it works now. So you have DNS working, and the OMS - agent connections work fine? Right? No need to add extra entries in the hosts files.
The note should probably say: if you don't use DNS then you should add the entries in the hosts file.

System monitoring plugin for Vmware ESX server..

i have a OEM grid control 10.2.0.5 with management plugin for Vmware ESX server (Management Plug-in: vmware_esx_server, Version 1.1.3.1.0) added.
I later added another server agent for management/monitoring of VMware ESX server.
the agent state is UP and under Monitored targets for the agent I am now trying to add the VMware ESX server
Once on the page, here I enter the details <Hostname / Usrname:Pwd / Protocol:HTTPS / Keystore> and click on Test Connection and recieve a Warning :
Failed to contact the target to be added. Following errors were received while testing the connection to the target. Update the properties accordingly, try Test Connection for testing the properties before saving.
TestVersion - caught com.vmware.vim.InvalidLogin: ; nested exception is: javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty Aug 26, 2009 9:28:04 AM org.apache.axis.utils.JavaUtils isAttachmentSupported WARNING: Unable to find required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachment support is disabled.
If I go ahead and click OK it adds the Target(Vmware esx server) to the agent and displays message :
"Target ESXVS (VMware ESX Server) has been added."
THE problem starts here.. the metrics collection doesnt happen for the target and I get Metric collection errors.
I have tried checking in diff versions of management plugins as well as tried adding the target to the Grid control's agent//
Pls help..

Is the location that you specified for the keystore file somewhere that the agent can read from (either a drive local to where the agent is installed or a network drive that the agent has access to)? Is the keystore file one that was generated for that specific ESX Server from its rui.crt file? Each ESX Server has a different rui.crt file that you use to create the keystore file.
You won't be able to collect metrics if the SSL connectivity isn't set up correctly.
Dave
Edited by: user716739 on Aug 26, 2009 4:54 AM

Girder plugin for MSI Vox remote control

Hi!
Since I bought a VOX USB2.0 for using in my laptop I found the remote control useless cause it only works with the MSIPVS (that I don't use) and there was no plugin for it.
So, recently I had some free time and I developed a plugin that allows me to control my pc with this little remote control.
If there's someone else interested in this plugin I can make it available to download.
Samuel

Hi!
I have installed Christv v4.99, Grider and downloaded config files for VOX on Promixis site (thanks Alexis!!!). I can see that remote will work (have tried some of functions and it works) but my problem is:
Christv doesn't give me good quality picture like Fly 2000 TV. If I try to change some settings in "Program settings" then it is reflecting to CPU usage! My fun on laptop is very loud when it is hot, so it disturbs me too much
I am attaching Print screen from my current settings (pic on Christv is black but not on my PC) but if I change advanced settings for Greedy HM it doesn't remember it after shutting down Christv. If anyone have lower CPU usage and good pic quality with Christv it will be very nice if (s)he post it here
Sorry for my bad english
http://img126.imageshack.us/img126/2959/screenki7.jpg

Fedora 13: After upgrading from FF3.6 to FF6.0.2 I no longer have a Java plugin. How do I configure the Java Plugin for FF 6 ? There is no Java Plugin at the site

I am Fedora 13x64 bit. I just installed FF v6.0.2 from the FF download site. I backed up the existing FF 3.6 as firefox_old
I need to have a Java plugin to access company site, how do I configure the Java Plugin ?
At the Plugin area in FF6 there is no Java Plugin available, even after a search.
I have Java 1.6.0 installed in the OS at:
/usr/lib/jvm/java-1.6.0/jre/lib/amd64/libnpjp2.so
I googled how to configure Java Plugin for FF 6 for Fedora 13 and the trick was to create a soft link from /home/<userID>/.mozilla/plugins to the above libnpjp2.so

AVtech wrote:
. . . If a person can't get an answer here I don't know where else to turn since Sun certainly wouldn't offer tech support for a free product . . .These forums are user forums, and only occasionally visited by Sun employees. Sun does provide Java technical support options, although (of course) at a charge.
See:
http://developers.sun.com/services/
. . . I guess we'll just use JRE 5 until it's unsupported, whenever that will be. I'm still waiting for an answer on that question, too. See:
http://java.sun.com/products/archive/eol.policy.html
http://www.sun.com/service/eosl/
This document (part IV and Appendix) has some debugging and troubleshooting information that may allow someone involved in the problem to resolve the cause:
See:
http://java.sun.com/javase/6/docs/technotes/guides/plugin/developer_guide/contents.htm
Any steps that you can take to isolate the problem to specific Java versions, browsers, applets, web sites, operating systems (and versions), etc, would enhance the possibility of getting help.
You can try the applets at this Sun location and see if any of them are "slow".
See:
http://java.sun.com/javase/6/docs/technotes/samples/demos.html

Setting up the Apache HTTP Plugin for several BEA Servers

Hey together,
i would like to setup the apache http plugin for several bea-servers.
I am running apache 1.x on my hp-ux system. There are 2 bea-server-domains on this box and both should be proxied by the plugin simultaneously.
As far as i know it isn't possible to run 2 or more instances of the apache webserver. I heard of virtualhosts, maybe i should try this one out.
Somebody knows how to deal with this problem or does any1 know if virtualhosts could cope with my needs?
Thanks in advance

Ok here i am again and i'm stuck. Here my wishes again:
there are 2 weblogic-instances (domains) running on a machine xxx, instance A listening on port 8041, instance B listening on port 8051. I want to configure apache virtualhosts in combination with weblogic plugins, so that request with /ld will be sent to instance A while requests with /ldd will be sent to instance B. Both are no clusters. Therefore i tried it with the following configuration (httpd.conf):
<VirtualHost xxx:8080>
     DocumentRoot "/opt/hpws/apache/htdocs"
     ServerName xxx:8080
     <IfModule mod_weblogic.c>
     WebLogicHost xxx
     WebLogicPort 8041
     #MatchExpression *
     #PathPrepend=/test2
     </IfModule>
     <Location /ld>
     SetHandler weblogic-handler
     PathTrim /ld
     </Location>
</VirtualHost>
# VirtualHost2 = xxx:8090
<VirtualHost xxx:8090>
     DocumentRoot "/opt/hpws/apache/htdocs"
     ServerName xxx:8090
     <IfModule mod_weblogic.c>
     WebLogicHost xxx
     WebLogicPort 8051
     #MatchExpression *
     #PathPrepend=/test2
     </IfModule>
     <Location /ldd>
     SetHandler weblogic-handler
     PathTrim /ldd
     </Location>
Doesnt really work. Can some1 help please?
Thanks

Can I do this with a plugin for Reader?

Hello, I'm totally new to Adobe Reader development and I'm in the need to develop a plugin for Reader that must implement certain functionality. Before starting, I think it's better to ask to the experts if what I want to do is possible or if what I need goes beyond what the Adobe API provides. So, if you're so kind, I'd like you to check the list of needed features and please tell me if they can be fulfilled with a Reader Plugin.
The plugin must work for Adobe Reader 7,8,9 and 10. It's not a problem if I need to develop a plugin for each version.
When the user tries to print a document, I will block/cancel the printing process depending on which document is tried to be printed (the full path to the document will be needed).
I need traceability in "Save as" and "Save as text" features, if the user saves a copy of "c:\file.pdf" into "c:\file - copy.pdf" I need to know both the source and the destiny of the save as operation. Same for any kind of "export to format x" operations if possible.
I need to be able to communicate with another module via named pipe to periodically send information. This might require dinamically loading a DLL and calling its methods.
[Optional] I need to restrict the use of the clipboard depending on the documents opened in Reader, i.e. don't allow to copy if a certain document is opened.
[Optional] If a document is exported via file printer (like Microsoft xps printer), I need traceability on this operation. I'm really pesimistic about this one.
Also, I'm assuming that retrieving the list of opened documents, or the "active" document will be possible at any time. Please, correct me if wrong.
Thank you very much for your time, for reading and helping. Im' not asking you to tell me how to implement every single feature, I just need to know if I will be able to implement them when I get some knowledge.
Have a great day. Greets.
Message was edited by: fernandoarrabal reason: bad phrasing

Two things.
First – Adobe no longer supports Reader 7 or 8, so you would be on your own for those.
Second, in order to develop a plugin for Reader you need to obtain a license from Adobe. Details and forms are in the Acrobat SDK. Start this process ASAP as that will tell you whether you will be able to do your plugin or not.

How to configure webserver plugin for IIS to fwd request to multiple server

Hi,
Have configured Sun One webserver plugin for IIS is configured as per the documentation - http://docs.sun.com/source/816-7156-10/agplugin.html
Have a requirement to forward the request to three different servers
Eg : http://www.host1.com/app1
http://www.host2.com/app2
http://www.host3.com/app3
Getting bad gateway error when this is configured in sun-passthrough.properties file
serverpool1.server=http://www.host1.com
serverpool1.passthrough=/app1
serverpool2.server=http://www.host2.com/
serverpool2.passthrough=/app2
Is this configuration wrong?
Thanks

First, set the user back to www or whatever it was. To do namebased virtual hosting, you'll need to change two things. The first is to add a NameVirtualHost directive to /etc/httpd/sites/virtualhostglobal.conf
This is one of the VirtualHost stanzas from my Linux box, you just have to adjust the paths for your machine:
<VirtualHost www.mydomain.com>
ServerAlias mydomain.com
ServerAdmin [email protected]
DocumentRoot /usr/people/httpd/html/www
<Directory /usr/people/httpd/html/www>
Options Includes
AllowOverride AuthConfig
</Directory>
ScriptAlias /bin /usr/people/httpd/cgi-bin/www
ScriptAlias /cgi-bin /usr/people/httpd/cgi-bin/www
</VirtualHost>
Restart Apache and you should be good to go. If there are errors, could you post them from /var/log/httpd/error_log ?
Roger

Third party plugin for premier pro cs6

I installed a third party plugin for premier pro cs6 on my mac and it's not loading... How can get premiere to see it in the program?

hi todd,
cart in front of the horse syndrome - wrote BEFORE reading the article. sorry ;-)
am coming from 10 years of vegas, unhappily so, but at my age 60+, i'm wary of anything new....

How can i create a plugin for adobe in design CS3

i'm trying to make a plugin to use it in adobe Indesign CS3 program but i can't
i'm using Windows 7
i had tryed to make a plugin using Eclips with indesign plugin editor and Visual studio C++ but i can't as i can;t find where can i write my code and there is also an error while debuging is that :
<error PRJ0019: A tool returned an error code from "Performing Custom Build Step">
after working out this error "by adding the directory of Odfrc.exe in tools->VC++ Directories->executable file" another error raise to me :
<Unknown compiler version - please run the configure tests and report the results> and the visual studio raise message box to me to specify the name of the executable file to be used for the debug session
i don;t know wat can i do know all i need to create a plugin for indesign program so could any one help me ??

Each version of the SDK has very specific demands for the compiler setup, and this in turn relies heavily on the operating system. The CS3 SDK probably was based on a much older version of Visual Studio.
Compare your toolchain against the requirements that should be stated somewhere in the CS3 documentation. It's a solid bet you are years ahead -- there simply is no reason for Adobe to keep on supporting all OSes and compilers that continue to appear, for a version of InDesign that's by now 2.5 versions old.

How can I create a search plugin for multiple fields

There are a number of sites that have search capabilities but they require entries into multiple fields.
One such site is for instance the IBM Employee directory.
(http://www.ibm.com/contact/employees/servlets/lookup)
On this site - in order to get usable results - I have to enter both First name and Last name of the employee I'm looking for.
I created a search plugin for the site, however I wasn't able to split the entered text into two parts and provide them as separate fields for the form.
Is there a way to do this?
Regards,
Imre

Hi,
This is excellent. Not search-plugin though but but this is as good as a search-plugin. (Even better, as I haven't seen any solution with the plugins for the problem.)
I didn't know that it was possible to use javascript as bookmark location.
Thanks,
Imre

Using XMP Lib in a plugin for CS5.0 Windows

Hello
I have been able to compile the XMP-Toolkit-SDK-5.1.2 and use it successfully in a plugin for CS5.0 Mac OS X.
Im now trying to do the same on windows, but with no luck. Im using MS Visual C++ 2008 express edition.
There seems to be a conflict between the XML library and msvcprt.lib library. If I try to exclude the msvcprt.lib library I get only one error.
If I try to exclude the msvcprt.lib i get the following problem:
1>PlugInStatics1.obj : error LNK2001: unresolved external symbol "__declspec(dllimport) public: __thiscall std::locale::id::id(unsigned int)" (__imp_??0id@locale@std@@QAE@I@Z)
I get the following linker problems:
1>XMPCoreStaticRelease.lib(WXMPMeta.obj) : MSIL .netmodule or module compiled with /GL found; restarting link with /LTCG; add /LTCG to the link command line to improve linker performance
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >(class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &)" (??0?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAE@ABV01@@Z) already defined in XMPCoreStaticRelease.lib(XMPCore_Impl.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::~basic_string<char,struct std::char_traits<char>,class std::allocator<char> >(void)" (??1?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAE@XZ) already defined in XMPCoreStaticRelease.lib(WXMPMeta.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: char const * __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::c_str(void)const " (?c_str@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QBEPBDXZ) already defined in XMPCoreStaticRelease.lib(WXMPMeta.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >(char const *)" (??0?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAE@PBD@Z) already defined in XMPCoreStaticRelease.lib(XMPCore_Impl.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: unsigned int __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::size(void)const " (?size@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QBEIXZ) already defined in XMPCoreStaticRelease.lib(WXMPMeta.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: void __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::push_back(char)" (?push_back@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAEXD@Z) already defined in XMPCoreStaticRelease.lib(XMPUtils.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > & __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::assign(char const *,unsigned int)" (?assign@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAEAAV12@PBDI@Z) already defined in XMPCoreStaticRelease.lib(XMPCore_Impl.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: char const * __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::data(void)const " (?data@?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QBEPBDXZ) already defined in XMPFilesStaticRelease.lib(P2_Handler.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > & __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::operator=(class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > const &)" (??4?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAEAAV01@ABV01@@Z) already defined in XMPCoreStaticRelease.lib(XMPCore_Impl.obj)
1>msvcprt.lib(MSVCP90.dll) : error LNK2005: "public: __thiscall std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >::basic_string<char,struct std::char_traits<char>,class std::allocator<char> >(void)" (??0?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@QAE@XZ) already defined in XMPCoreStaticRelease.lib(WXMPMeta.obj)
Best Regards
/ Pontus Hulin

Hi Pontus.
You're probably mixing static libraries with shared.
Regards
Bartek

A little info about the iSync plugin for the N97

Several 3rd party developers have confirmed that something is broken in the way the N97 communicates via the iSync plugin. Nokia has changed, incorrectly implemented, or out right made something wrong and a firmware upgrade is DRASTICALLY needed or a plugin will NEVER work. The problem started with Nokia and ends with Nokia. They need to fix the problem with the N97. The developers feel that unless Nokia fixes this problem there will never be a plugin for the N97. It is as simple as that.
This is all the info that I have at the moment. For the time being the only way to sync your data is:
1. Prepare all of your data the way you want on your phone and then us Ovi. This can be a problem too as Ovi is not that great and is not very stable.
2. You can use Memotoo (www.memotoo.com) to sync your data via SyncML. I have used tried it and it works okay. Better than Ovi for sure but it costs.
3. You can use The Missing Sync by Mark Space (www.markspace.com - currently testing). It does not use the same way to sync via iSync plugins. The Missing Sync sends a plugin to your phone instead. The syncing is very stable and works flawlessly. The only drawback is that the phone plugin is not exactly designed for the N97 and it requires that the N97 needs to be reboot sometimes to sync. Other than this, the operation is flawless and it appears that Mark Space will be able to fix this one problem faster than Nokia will be able to fix their phone.
Hope this helps......
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Yes, once you have MfE, you can sync N97 to Google Calendar and Gmail Contact list. The Mac's iCal app can add the Google Calendar. For Address Book, there are two choices: Access Gmail Contact via LDAP, or do proper synchronization in iSync style (see http://lifehacker.com/393855/enable-google-contact-sync-without-an-iphoneipod-touch).
MfE is not "installed" by default in the N97, but it is actually there. I need to credit someone on this forum for mentioning it, but I'm afraid I forgot who. The steps are basically thus:
Basically go to the Menu -> App folder, look for Settings Wizard "Sett. wiz.". Try to setup an email account from there. Don't use your gmail account though (it seems like MfE tries to be smart when it recognizes some email domains and pre-selects some settings for you, but we need to be able to access some options to set on our own). Don't worry about this account, you can always delete it once MfE is configured. At some point of the setup, you will be asked what kind of server. Choose Mail for Exchange. This will trigger Mail for Exchange to be installed.
Subsequently you will see your MfE folder populated with Mail for Exchange and other stuffs. Get into it and configure your Gmail. Some settings to note:
Exchange server: m.google.com
Secure connection: Yes
Use default port: Yes
Username: Your gmail username (just the name, no need the @gmail.com part)
Password: For the gmail account
Domain: gmail.com (I believe blank is also ok, but mine is current set as such)
Make sure that synchronization is set for Contacts and Calendar only. Tasks must be disabled (it used to be because Google Calendar did not support Tasks, but even they do support Tasks now, it still breaks MfE). Email must be disabled.
Done.
I did have further trouble though. The sync keeps hanging and then eventually "Invalid Password" error (yah right, after sync halfway they realize my password is wrong... no, something else is mucked up). I eventually deleted my phone data, and re-sync it from Google again, and everything was fine.
Once you've got your phone data on Google, you can search Google for other tips on pulling the data into Mac.
Hope you have fun getting this to work.

Latest MediaSource Plugins for various Creative MP3 Players are now available for downl

Just went to the product support site. Guess what? The latest MediaSource plugins for the various Creative MP3 Players are now available for download. I am sure the latest plugins should have fixed several problems.
Don't forget to download the latest Creative MediaSource v3.30.2 too. Install the latest Creative MediaSource first before you install the MediaSource Plugins of your respecti've MP3 Players.
Note: According to the download site, the latest MediaSource plugins require you to have at least v3.20.57 of Creative MediaSource.

Thanks micromouse
... but there's no new plugin for the original Jukebox
I've always had trouble connecting to MediaSource with my JB and was hoping for a new plugin to sort all my problems.
PB

Netapp plugin for Grid 10.2.0.4

Similar Messages

Maybe you are looking for