Netbeans 6.1 went crazy after updating

This is driving me crazy (too).
After updating Netbeans 6.1 went crazy and doesnt stop opening itself everytime I close it.
In other words "*Everytime I Exit Netbeans it opens itself again, then I close it and it opens itself again...*"
Anybody can help on that? (I dont know exactly where to ask about this).
Thanks

Just uninstall it, and do a clean install of 6.1

Similar Messages

  • 4s screen went black after updating to iOS 8.2

    So i updated my iPhone 4s to iOS 8.2 and the screen just went black after that. The phone is on but nothing appears to the screen and booting doesnt help. What should i do?

    Try waiting about 30 - 60 minutes to make sure that it isn't just the software being installed. After that, press and hold the Sleep/Wake button and the Home button together for 10 - 20 seconds until the apple logo appears.

  • Apple store/Itunes store went blank after updating iOS 8.1.3 in iphone 6

    ITunes store/ Apple store went blank in iphone 6 after updation of iOS 8.1.3

    See here  >  http://support.apple.com/kb/TS3424
    Also see this discussion.
    https://discussions.apple.com/message/21189708

  • My backround on the new tab page is gone. The boxes are there but I mean the actual background. It went away after updating an I wanna fix it.

    After updating my Firefox, the background for my new tabs page is gone. The boxes are there. But the rest of the screen is just plain white and I dont know how to fix it.

    The background on my new tabs page is white - actually bright grey, which is evidently the default. For changing colors used see
    [[Change the fonts and colors websites use]]
    Check the '''Allow pages to choose their own colors, instead of my selections above.''' If unchecked, so only boxes without any content are shown.

  • Alarm Clock going Crazy after updating 3GS

    After updating to iOS 4.1 on my 3GS when I set the alarm clock for 7am it goes off at 6am.
    How can I get my phone's alarm to go off at the time a set it to, instead of an hour earlier?

    I have the same problem, and so did everyone at uni I asked this week, but it seems to only be the alarms that are set to repeat each week, if you set a "one off" alarm it goes off at the right time which makes it more confusing. Must have something to do with daylight savings and the fact the government keeps making it start earlier and earlier each year.

  • HT4623 iphone went dead after update

    iphone went black after update

    Connect iPhone to computer with USB Cable and Reset, hold both home and power buttons until the iPhone begins to respond. Usually takes about 20 seconds of holding both buttons. If still problems, try DFU Mode Restore. Open iTunes on computer. Connect iPhone to computer with USB cable. Hold both Home and Power button, after exactly 10 seconds release the Power Button, keep holding the Home button until iTunes recognizes iPhone in Recovery Mode, usually about 20 seconds time.

  • IPod screen went away after updating to 1.3

    wishing everyone a very happy, healthy and prosperous new year of 2009!
    i have an ipod 5th gen 30gb (model number a1136), which i use very sparingly. i have had it since 2005. today i connected it to my computer which has itunes 8. itunes asked me to update the software on the ipod to version 1.3. i do not remember very well, i just have a hunch that my ipod originally had 1.2.1 version.
    as soon as the update was done, itunes gave me a message that the ipod will restart. after that, my ipod went for a toss. i see some coloured stripes, mostly white screen. itunes recognises the ipod, and i can even hear the clicking when i use the click wheel. the screen brightness goes high and low as it would when it used to work.
    please help me fix this issue. thanking in anticipation...
    regards.

    chris,
    restore did not work. i followed the 5 R's. the display remained white, with vertical coloured lines.
    regards.

  • Iphone 4 information went missing after updating to iOS 7!

    Please help I just updated my iphone 4 to ios 7 and i chose to to backup my information, but once it had finished downloading all my old information had been gone! Is tree a way i can restore it back? I checked my iCloud and tunes but it isn't there! I have very important contacts tere that are all gone now!

    Welcome to the Apple Community KawaiiHelper.
    it's not really clear what you are trying to say. Are you restoring from an earlier back up.

  • Help....Mail goes crazy after update when using exchange account

    Since I updated to 10.5.5 my exchange account goes haywire regularly. I was able to get it back up the last time it happened by moving to a IP address for my outgoing server, but this time nothing is working. Any suggestions????

    Sry for beeing a bit unclear, still early in the morning :P
    I´d try this:
    go to ~/Library/Prefrence/ delete "com.apple.mail.plist", log out and back in again, launch Mail
    Still dont work?
    Go to Mail Prefrences/Accounts/ delete your account and set it up again

  • My iphone went crazy during update

    While updating my phone to the most recent operating system, an apple logo appeared. It goes from black, to white, to gray. It appears that nothing is really happening. Now it is just a black screen???

    Photos taken by the phone are part of the backup. Check this article what else is included:
    iTunes: About iOS backups
    If you are backing up to your computer, go to iTunes/Edit/Preferences/Devices and check the listed backups to find out when the last one has been made.
    If iCloud does the backup, your phone will back up the data whenever connected to Wi-Fi and in standby mode. Go to Settings/iCloud/Storage and Backup to find pout when the latest backup was made. Then follow this article to restore from the backup:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    Music and other purchases from iTunes can be downloaded again for free:
    Downloading past purchases from the iTunes Store, App Store, and iBooks Store

  • After updating my Iphone 4s to os 7.1.1 ota, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset! My phone has the itunes logo and charger symbol on it .

    After updating my Iphone 4s to os 7.1.1 from 7.1 over the air, my phone went into recovery mode. Yet when I try to restore it with Itunes on my windows 7 laptop it says the network connection has been reset. Make sure your network settings are correct and your network is active, or try again later. My phone has the itunes logo and charger symbol on it, as well as an arrow pointing at the Itunes logo. After holding the sleep button down or even doing the hard reset the same screen comes up on my phone regardless of whether it is plugged in or not to my computer. I have turned my computer off and on again. It is plugged in and charging as it's battery life is very short. I also reset my modem and the same error message pops up. The only option on my computer when my phone is plugged in is to restore it. My firewall also allows Itunes through it. I have literally tried everything I know being someone who knows very little about technology. I also do not want to hear about how the update worked for other people. My phone has been in recovery mode for 5 hours at least now so it will just make me more frustrated if a bunch of people post about how the update worked for them.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    kevinpowell1 wrote:
    how can i get it out of recovery mode?
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    Some users have reported as many as 8 or 9 attempts were necessary before success.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766
    If the issue persists...
    Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • After updating to iOS 5, my Iphone 4 is not reading my SIM Card.  I went to ATT and got a brand new SIM Card, and it still hasn't worked. Can you help??

    After updating my iphone 4 to iOS 5, it refused to read my att SIM Card.  I went to the Apple store (Lennox Mall, Atlanta Georgia) for help, they told me that it was an Att problem, and needed me to get a brand new Sim Card from Att.  I went to Att and replaced my SIM Card to a new one.  I later returned to the Apple store, but the phone still didn't work.  The apple techs blamed the att network, and stated I needed to go home and wait for 24-48 hrs, and retry the att network again, and hopefully the phone will work.  The next option they gave me was to pay $200.00 to get a replacement because my phone was out of warranty.
    So I basically I have a phone which has never been dropped, not abused, no water damage or what so ever.  Prior to my IOS 5 update, it worked perfectly without any problems.  Now, that its not working as a result of either Apple's or Att's fault, no one seems to be helping or standing behing their product.  Both parties are blaming each other for the problem.  Can someone help??

    I've seen a number of reports of this on here. In most cases where people took their phones in to the Apple store, they were given a replacement, even if the phone was out of warranty.

  • After updating my iphone5, my phone went back to factory setting and now I can't sign in with my apple id because it does not recognise it... Help?!

    After updating my iphone5, my phone went back to factory setting and now I can't sign in with my apple id because it does not recognise it... Help?!

    Yes, my telco is an approved carrier. If my phone was brand new, I think so, they opened it in front of me.. I really couldn't remember it was 1.4 years ago. It did seem new.
    Well it says, "_____" cannot be used to unlock this iphone. I've tried both my apple ids but it didn't work.

  • IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

    iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
    I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
    EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
    I don't have Apple Care, what to do? Spend more money and buy a new phone?

    Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
    I myself, two days ago purchased a  2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
    I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
    Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
    Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
    SHAME ON YOU!

  • FF16.0.2, after updating flash plugin to 11.5.502.110, all flash content went blank, reinstall dint work.

    After updating my shockwave flash player to 11.5.502.110, the flash content on pages went white blank, i can still see the bounding box of the flash content, but they are all white blank. When i right click on the content, flash context menu is not showing up as usual.
    tried uninstall (from windows control panel) and reinstall, didnt work.
    OS: win7
    Firefox : 16.0.2
    Flash plugin : 11.5.502.110
    help is appreciated, thanks

    Flash 9 r45 is way too old and a lot of Flash content won't work with such an old version.<br />
    If you want to revert to an older Flash version then get the latest Flash 10.3 version that is still maintained with security updates
    Adobe Forums: Where can I find direct downloads of Flash Player 10.3 for Windows or Macintosh?:
    * http://forums.adobe.com/thread/889580

Maybe you are looking for

  • Outgoing Payment Report - Bank Transfer

    Does SAP Business One have a built in "Outgoing Payments report" that would display payments made via bank transfers? Or the only option is to create a query? Thanks,

  • Bean in JSP is NOT WORKING. Please help

    Hi,           Anyone who got java-beans working with WL JSP? I could not get even the           hello bean to work. I am getting a error message saying somthing like           "foo.bar.HelloBean.class is not a bean" .           Is there any perticula

  • Internal sound stopped working

    My internal sound suddenly stopped working. I can still hear sound with headphones, but the internal speakers are not functioning. The trademark start-up sound (Beatles Day in the Life rip off) is the only sound that comes out of the MacBook. Within

  • Can Oracle 9i be installed on non-server Mac OS 10.3?

    Hello All, I apologize if I'm repeating questions, but I've combed the forums for an answer to this question and I've been unable to find much info. I need to install Oracle 9i on my Ti PowerBook (10.3.2, 1 GHz G4 processor, 1 GB RAM). I want the DB

  • Reservation against maintenance order and MMBE

    Dear Experts, As per my knowledge the reservation which are created through maintenance order will be reflected in MMBE as we save the order, without specific to status of maintenance order.But here in my client it is not happening, instead of this i