NetBeans and J2sdk1.4.2 installation problem

Hello,
I downloaded the "j2sdk-1_4_2_07-nb-4_0-bin-win.exe" and did installation.
The installation got completed with a message saying that the installation was over with errors.
Then when i execute the Netbeans, it gives an error message "Cannot find java.exe".
In my j2sdk folder there is a folder by name "_uninst", and a test file "install.txt". No other files are present.
The text file contains the following 2 lines,
"Installing J2SDK..."
"Finished Installing J2SDK..." "
Where Iam wrong. How should i get my java working.
Can any one give me a suggestion.
Regards,
vdharan

The bundled Java/NB product has a much higher incidence of install problems that the individual products.
I recommend you download and install a Java-only product , then separately download (from www.netbeans.org) a matching NB product.
I have Java 1.5.0_02 and a separately installed NB 4.0
(this route also allows easy upgrades of either product, independently.)

Similar Messages

  • 2101nw print server (and LaserJet M1132 MFP) – installation problems on Windows 7 (64bit)

    For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
    A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
    Then, I went on with the reinstallation of HP software, for the print server and the printer.
    And it was a disaster.
    After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
    Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
    You can imagine my disappointment.
    Now, hopefully, I write in this forum to ask for help. My request is twofold:
    1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
    For this purpose, can you please give me your suggestions ?
    2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
    I’m asking because I found these pages which seems to give some hope, but I’m not so sure  ... :
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
    Many thanks in advance for your help
    Simone

    For two years, I've been a happy user of an HP printer (LaserJet M1132 MFP), wirelessly connected to my home network thanks to a HP Wireless G Print Server HP 2101nw.
    A week ago, a new machine came in and – to align operating systems - I had to install Windows 7 (64 bits) also on my laptop (previously we were running Windows XP).
    Then, I went on with the reinstallation of HP software, for the print server and the printer.
    And it was a disaster.
    After the failure of the first installation ("Installazione non riuscita"), I went through a series of attempts of uninstalling and reinstalling, again and again, by various methods. Uselessly. Even Revo Uninstaller did not help.
    Then, looking for information over the web, I read there was a known problem of incompatibility of the print server’s driver with 64-bit environment, and that HP was not going to rewrite it .
    You can imagine my disappointment.
    Now, hopefully, I write in this forum to ask for help. My request is twofold:
    1) I would like to properIy clean up my laptop and remove all that bad installed sw (both of the print server and the printer), so that at least I can successfully reinstall printer software for using it via USB cable.
    For this purpose, can you please give me your suggestions ?
    2) I would like to know: It is true that there is no driver available for use this print server on Windows 7 (64 bit) ?
    I’m asking because I found these pages which seems to give some hope, but I’m not so sure  ... :
    http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-2101nw-Wireless-G-Print-Serv...
    http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers/HP-2101nw-wireless-printserver-on-w...
    Many thanks in advance for your help
    Simone

  • G4 and Final Cut Express installation problems

    Thank you in advance for any help you can send my way. Any will be greatly appreciated.
    I have a PowerMac G4 (gray) tower. Recently, under the advice of a Mac tech, I installed a 200GB harddrive and a Sonnet's Tempo ATA133 PCI card so that I could successfully install and run FinalCut Express. Now not only do I have the previous installed but I also have 1GHz CPU Speed, 1GB of RAM, DVD/Superdrive, Mac OS 10.4.3 and more than enough memory for the installation.
    So now for the two strange parts:
    1) When trying to install Final Cut it says that I cannot install the software because I lack the hardware.
    2) And now I noticed in my System Profiler it says that my Machine Name is "Power Mac G3 (PCI graphics)" which I know it is not!
    Do I have the wrong PCI card? Did I install it wrong? Am I missing something?
    For your reference, listed below is what is required to run Final Cut Express:
    Minimum Hardware Requirements
    • A Macintosh computer with a 500 MHz or faster PowerPC G4 or G5 processor (550 MHz for PowerBook G4, 450 MHz for dual-processor Power Mac G4 or G5) and an AGP (Accelerated Graphics Port) graphics card compatible with Quartz Extreme
    • 384 MB of RAM (512 MB required for RT Extreme and Soundtrack)
    • For HDV: A Macintosh computer with a 1 GHz or faster PowerPC G4 or G5 processor and 1 GB of RAM
    • 1 GB of available disk space for application installation
    • 5 GB of available disk space for Soundtrack content
    • 9 GB of available disk space for LiveType content
    • DVD drive for software installation
    Minimum Software Requirements
    • Mac OS X 10.3.7 or later
    • QuickTime 6.5.2 or later
    Thanks again.

    HI Coyote,
    This could prove to be a problem. You definitely need 65MB of VRAM to run FCP. And FCP is a fairly sophisticated video editing program and takes time to learn. Unless the iBook has DVD burn capability, which I doubt, even with an older version of iLife, you wouldn't be able to burn to DVD's. But you could use iMovie, which is part of iLife to view video that's been uploaded to the iBook. Another potential problem is, I think this particular iBookG4's factory drive is 60GB. Video editing requires huge amounts of drive space to run without crashing. iLife 05 requires 4.3GB of drive space. iLife 05 requires 256MB of RAM, but runs much more efficiently with 512MB.
    So, you have several glitches. Limited drive space, limited memory, insufficient VRAM, and no DVD burn capability. You wouy also need a camcorder that is compatible with the iBookG4.
    I wish I had better news... here is a link to Apple's information for minimum requirements for iLife 05: http://docs.info.apple.com/article.html?artnum=306338
    Carolyn

  • URGENT - Oracle 9i, Oracle 9iAS, and Oracle 9iAS Portal Installation Problem

    ERROR :
    1. Objects with type JAVA CLASS with more than 30 characters are truncated to 30 characters
    2. There are only 30 objects with type JAVA CLASS are installed (instead of 334) mentioned on the troubleshooting guide
    3. Oracle9iASHttpService automatically stops after starting the service
    Environment :
    Windows 2000 Server
    Oracle 9i 9.0.1.1.1
    Oracle 9iAS 3.0.9.8.2 (Oracle 9iAS 1.0.2.2.2a)
    PDK Services for Java version 3.0.9.0.4 (from Patch used to install 3.0.9.8.2)
    Patches 8.1.7.1.1, 8.1.7.1.5, 3.0.9.8.2
    I installed the Oracle 9i, 9iAS, Portal and the patches based on the installation instructions (http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/DOCUMENTATION/INSTALL_GUIDE_9I.PDF)
    I tried adding the Sample Web Provider I got ORA-29531 error on HttpProviderDispatcher. Then I checked the Patch 8.1.7.1.1 installation, they are some scripts that need to be run that was not part of the 9i/9iAS installation instruction. I run the suggested scripts(catalog.sql, catproc.sql and utlrp.sql) and modified the jserv.properties to point the xsqlconfig.xml to ORACLE_HOME\oracore\admin.
    The error still persisted. From the Troubleshooting PDK Services for Java, one of the suggestion is to run the sql command :
    Select object_name, object_type, status from user_objects where object_name like '%HttpProvider%';
    which resulted to an object with name '/3334f18_HttpProviderDispatche' without the 'r' at the end
    and
    Select count(object_name) from user_objects where object_type='JAVA CLASS';
    which resulted to only 30 VALID object. According to the installation instruction, there are supposedly 334 objects.
    I checked the object_name of the other JAVA CLASS objects, all the names of the objects are all less than 30 characters. It looks like that the objects with the object_name > 30 are truncated to 30 characters.
    Then I rebooted the machine, when the machine went back on Oracle9iASHttpService stops automatically after it has been started.

    I have posted question on that thread and there is no specific solution from our problem. From the Oracle PDK Troubleshooting PDK Services for Java, it looks like there is a problem on the Oracle Portal installation. I tried recompiling the packages and my problem worsened. Now I cannot start the Oracle9iAS HTTP Service.

  • Oracle Database 10.2 and Client 10.2 installation problem

    Hi Everybody,
    I am trying to install Oracle Databse 10.2g and Oracle Client 10.2 on the same server(windows 2003). I have few queries :
    - Can we install both on Same Server
    - Shall be install in the same directory or each in differenct directory
    - Does each oracle database and oracle client has it's on oracle/home path
    I installed the Oracle database and check it was working fine, I have also login through "sqlplus "/as sysdba". It was ok, all the oracle services were running perfectly. But when I installed the oracle client on the same server then all the oracle services were stopped and even when I tried to restarted manualy then got error, local user cannot start the service. Aslo not able to login thrugh sqlplus.
    Could you please give your expert views.
    Thanks in advance.
    Harish

    You can have as many Oracle Homes as your require, but you should be aware that each new Oracle Home modifies PATH environment variable, so the database could have been working fine until the client was installed, which has modified the reference to the database home.
    You could modify it back from the server advanced properties at the windows control panel.
    ~ Madrid

  • Adobe Photoshop and Premiere Elements 11 installation problem

    I've just bought this program, and am trying to install it on my computer for the first time, but am getting an error when I try to play the Autorun.
    Then when I click "OK", I get an unreponsive screen:
    Any idea what I could be doing wrong?

    Lets give some time for the DVD to load and then click on open folder and run the setup.exe.
    Alternatively, you can try running that application from the desktop. http://helpx.adobe.com/creative-suite/kb/install-creative-suite-5-cs5.html

  • Java ME SDK 8.0 EA Netbeans plugin installation problem

    We have been getting reports that some developer had trouble installing the Java ME SDK 8 EA plugins into NetBeans. We are working on fixing the issue, in the meantime please try the workaround posted in the Java ME SDK forum:
    Java ME SDK 8.0 EA Netbeans plugin installation problem
    Also be sure to check the latest ME SDK 8 EA Release Notes for late-braking information:
    http://docs.oracle.com/javame/dev-tools/jme-sdk-8/release-notes/html/Release_Notes/Release_Notes.html
    Sorry for the inconvenience.
    Best,
    -- Terrence

    Hi,
    For the Raspberry Pi, tooling over serial port is not supported. The simplest solution is to use standard IP networking over Ethernet. This can be a direct connection between the PC and the Raspberry Pi, as long as the cable is twisted and the IP addressing is correct (e.g. manual IP addressing or DHCP server on the PC).
    Regarding "Connecting to a UART Device": This is meant for attaching and controlling serial devices from the Raspberry Pi, not for tooling connections between the Raspberry Pi and the PC.
    Hope this helps,
    -- Terrence

  • Communication problem between NetBeans and Tomcat

    hi!
    i got a quite mysterious problem. here is what happens:
    - i start NetBeans 5.5.1 (the first time)
    - i want to debug my JSF-Project, the Debugger starts
    - After a few seconds the debugger waits for tomcat (it sais: "Waiting for Tomcat...") and tomcat starts
    - Again after a few seconds the tomcat-debugger-output sais "Tomcat startet in 3333 ms".
    okay.
    when i enter http://localhost:8084/ in my browser i get the tomcat homepage, so the server has definitely started! But nothing happens in NetBeans and nothing happens with my project....
    In the lower-right corner i see this blue working-bar that sais "deploying project" but nothing happens. The Project-Debugger-Output still sais "Waiting for Tomcat..." but nothing happens...
    And after something around 3 minutes (i guess it's a timeout) i get the error "Starting of Tomcat failed." But is HAS started, i can login to the Administration-Area in my browser!
    so i guess there is a communication problem between netbeans an tomcat. Netbeans waits for a message from tomcat but tomcat doesn't send it..or netbeans doesn't understand it.
    But the story goes on:
    When i press the debug-button a second time it takes only a few seconds till i get the message: "Tomcat server port 8084 already in use". OF COURSE! Because Tomcat has already startet and can't be stoped by NetBeans.
    i'm trying to solve this problem for 4 days now, so i would be very happy if anyone has an idea where to start/continue the search...
    thanks,
    flo.
    some system-info:
    - windows vista business 32-bit
    - no firewall is running
    - AntiVir Personal Edition IS running
    - Yahoo Widgets Engine IS running
    - no other software is running
    and finally the tomcat-log:
    Using CATALINA_BASE: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base
    Using CATALINA_HOME: C:\Program Files\NetBeans\enterprise3\apache-tomcat-5.5.17
    Using CATALINA_TMPDIR: C:\Users\Administrator\.netbeans\5.5.1\apache-tomcat-5.5.17_base\temp
    Using JRE_HOME: C:\Program Files\Java\jdk1.5.0_12
    Listening for transport dt_shmem at address: tomcat_shared_memory_id
    21.09.2007 18:27:50 org.apache.catalina.core.AprLifecycleListener lifecycleEvent
    INFO: The Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: C:\Program Files\Java\jdk1.5.0_12\bin;.;C:\Windows\system32;C:\Windows;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\Common Files\Teleca Shared;C:\Program Files\Common Files\Adobe\AGL;C:\Program Files\MySQL\MySQL Server 5.0\bin;C:\Program Files\cvsnt;
    21.09.2007 18:27:50 org.apache.coyote.http11.Http11BaseProtocol init
    INFO: Initializing Coyote HTTP/1.1 on http-8084
    21.09.2007 18:27:50 org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 1862 ms
    21.09.2007 18:27:50 org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    21.09.2007 18:27:50 org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/5.5.17
    21.09.2007 18:27:50 org.apache.catalina.core.StandardHost start
    INFO: XML validation disabled
    21.09.2007 18:27:53 org.apache.coyote.http11.Http11BaseProtocol start
    INFO: Starting Coyote HTTP/1.1 on http-8084
    21.09.2007 18:27:54 org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8009
    21.09.2007 18:27:54 org.apache.jk.server.JkMain start
    INFO: Jk running ID=0 time=0/31 config=null
    21.09.2007 18:27:54 org.apache.catalina.storeconfig.StoreLoader load
    INFO: Find registry server-registry.xml at classpath resource
    21.09.2007 18:27:54 org.apache.catalina.startup.Catalina start
    INFO: Server startup in 3626 ms

    As i wrote before, the same problem occured for me. I have found a solution which is : Go to tools menu and then select options . In the proxy info, select No Proxy.
    I hope this help you

  • I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

    I can't get any contact info for installation problem- I just bought a Mac Air and my CS5 is asking for a reinstall. Mac Air has no DVD slots. HELP I al VERY FRUSTRATED THAT ADOBE HAS NO WAY TO GET HELP

    You are right, Adobe does not support CS5 because it is no longer sold.
    Simply download the trial version of CS5 from this Adobe web site and input your serial number.
    Adobe - Photoshop : For Macintosh

  • Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?problem.

    Hi! I just bought Lion and I am having a problem with the installation. It keeps telling me that the computer's hard drive has a S.M.A.R.T. problem. How can I solve it?
    Thanks!
    Angela

    You may have a hard drive problem. When I installed Lion, the installer told me that it couldn't complete because the hard drive was failing (or broken, the exact words escape me). Since the HD had been functioning just fine, I took it to the Genius Bar, and found out that yes, the hard drive was slowly dying (bad sectors). I couldn't reboot into Snow Leopard, the installer wouldn't let me and then the drive just wouldn't work at all.
    I had to replace my drive and restore from Time Machine. Thankfully, I had Time Machine, and had just done a backup 5 minutes before the crash.
    Best of luck.

  • Installer problems ?? frozen and cant shut down :(

    installer problems ?? frozen and cant shut down

    Thanks the error that came up was Error 1603. I have tried what they said and still no help . Think its off to the store tomorrow to see if they can figure it out.
    Thanks for trying to help

  • Update installation Problems: Code U44M1P7 in Extension Manger 6.0.4 and Illustrator and PS CS6

    Hello,
    After the installation of several updates I find several errors in the error log:
    " Update installation Problems: Code U44M1P7 in Extension Manger 6.0.4 and Illustrator and PS CS6"
    I use a Mac Book Pro with Retina and MAC OSX 10.7.5.
    What is the problem and how can I solve it?
    Best regards
    Frank

    Follow the instruction given at the following link:
    http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  • Netbeans and Windows 2000 Server Problems

    I've tried to run netbeans on my windows 2000 server OS a few times. It usually doesn't work out and I have to go back to pcGrasp.
    Does anyone out there know of any issues between netbeans and this OS. Is it worth it. I'd like to move away from the .net world and learn j2EE but I'd like to move up my IDE. Netbeans seems like the best choice. Does any experienced individuals out there know of a better one?
    This was my latest error with netbeans. From just opening a folder??? I also tried to report it - I still have to wait another hour after I registered before I could HOPEFULLY find where exactly I can report it. Maybe thats why there are so many bugs. They make it impossible to report something they tell you to report to help out.
    A java.lang.reflect.InvocationTargetException exception has occurred.
    Please report this at http://www.netbeans.org/issues.html,
    including a copy of your ide.log file as an attachment.
    The ide.log file is located in your C:\Documents and Settings\Administrator\.netbeans\3.6\system folder.
    Thanks for anything
    -Wiley

    I use Windows 2000 Professional and have not problems.
    I would suggest,
    - ensure you have all windows updates.
    - ensure you have JDK 1.4.2_04
    - try eclipse which is also free (From IBM) http://www.eclipse.org/

  • Update and installation problems

    I am having issues with Creative Cloud updates and installations.
    None of my Apps will update. I am prompted to update, I click the update button, Cloud says "updating software" but all attempts stop at 0%.
    Similar issues Installing Apps. Installations start but all stop at 90%. No error messages at all.
    This is extremely frustrating and all my Apps are in need of updates to fix minor bugs which are effecting my workflow.
    Can you help?

    We can't know. You have not provided any exact system info or other details like the install/ update logs. You can always run the cleaner and start from scratch.
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Troubleshoot Creative Cloud download and install issues
    Mylenium

  • Software Installation Problems with Media Source and Nomad Explo

    Hello Creative Users,
    recently I had to reinstall my operating system on the PC. I have an IBM Thinkpad R30 with a Sitecom USB2.0 pccard. I am running WinXP Pro SP2 with all latest updates.
    I have a Nomad Jukebox Zen Xtra with Firmware .20.08 and an update harddri've of 80GB.
    As long as I was running the software on my previous installation everything worked fine.
    I installed the driver .26.02. This recognized the Jukebox. Musicmatch is able to communicate to the Jukebox and recognizes all files on it.
    When I installed Nomad Explorer I got an error ctregserv failed because ctin...dll is not found.
    When I tried to install Media Source from the original disk it showed an error after 30% Media Source not found. Install Media Source before continuing.
    This is what I received now with all verisons of Media Source and Noamd Explorer incl. .30.0.
    Can someone help me as synchronizing with Musicmatch is a pain.
    Thanks
    Rolf

    Hi everyone,
    as I saw many questions regarding installation problems with Mediasource or Nomad Explorer
    in this forum I will answer my own question right here. I was pointed to the answer by a friend with a similar problem on some other software.
    When trying to install the Creative software under WinXP SP2 I happens that the registration does not work. the reason are missing write attributes to the keys for
    Creative software. To correct that go to: Start, Run and enter regedit. Hit ok and you are in the registration editor.
    Find the Creative location unde HKEYS_SOFTWARE. Click right mouse button and choose
    properties.
    Check full access for your user as well the system user. click on advanced and mark both all the users you want to install from. Check the lower box below the user window sayin something about roghts being propagetd to lower folders etc. Cklick conform and ok, click confirm on previous screen and close regedit.
    Now you should be ok and able to install.
    Regards
    Rolf

Maybe you are looking for