Netbeans IDE question

Hello, I'd like to know if it is possible to execute a java application using netbeans IDE and having the command prompt to display the output just like JCreator for instance. Any feedback is appreciated. Thx
DImi

Hello, I'd like to know if it is possible to execute
a java application using netbeans IDE and having the
command prompt to display the output Yes! netbean is created for java.. you can do much of things with it..

Similar Messages

Sun Studio (12,1) is unable to find a supported version of the Netbeans IDE

Hi all,
We're working on upgrading both the hardware and software on our application currently, and part of this involves upgrading our compiler to Sun Studio 12.1. I downloaded
SunStudio12u1-SunOS-SPARC-pkgs-ML.tar.bz2
from the Sun website and we installed it into the following location on our server:
/opt/compiler/sunstudio12.1
I successfully compiled all my code using the compiler, however, when I try to launch the debugger by typing ./sunstudio in the 'bin' directory, I get the following error:
{opt/compiler/sunstudio12.1/bin}./sunstudio
Sun Studio is unable to find a supported version of the NetBeans IDE.
Sun Studio requires a NetBeans IDE version 6.5.1 with NetBeans C/C++ module (cnd
2) enabled.
Sun Studio looks for a valid NetBeans IDE installation in the following order:
1) Location specified with --netbeanshome command line option
2) At /opt/compiler/sunstudio12.1/netbeans
I have seen references to executing 'prepare_system' on forums while I was trying to investigate this, but when our sys admin folks try to execute the command, it does not work (command not found). They've mentioned that they expected a prepare_system script in the directory where we untarred the downloaded sun studio tarfile, but it is not there:
drwxrwxr-x 4 59001 staff 1024 Aug 20 2009 .
drwxr-xr-x 3 yu12 lifecad 1024 Jul 2 09:48 ..
drwxrwxr-x 4 59001 staff 1024 Aug 17 2009 LEGAL
-rw-rw-r-- 1 59001 staff 3985 Aug 19 2009 SS12u1_README-pkgs.txt
-rw-r--r-- 1 59001 staff 5598 Aug 20 2009 SS12u1_README-pkgs_ja.html
-rw-r--r-- 1 59001 staff 4155 Aug 20 2009 SS12u1_README-pkgs_zh.html
-rwxrwxr-x 1 59001 staff 517979136 Aug 6 2009 SunStudio12u1-SunOS-SPARC-pkgs.sh
-rwxrwxr-x 1 59001 staff 11814 Aug 6 2009 install_patches.sh
drwxrwxr-x 5 59001 staff 96 Aug 17 2009 patches
I can see a netbeans directory was created as part of the install, but I'm not sure why sun studio thinks netbeans is not available (afraid my knowledge about netbeans is practically non existent):
{opt/compiler/sunstudio12.1/netbeans}ls -l
total 6062
drwxr-x--- 2 root root 512 Apr 5 11:14 bin
drwxr-x--- 7 root root 512 Apr 5 11:14 cnd2
-rw-rw-r-- 1 root root 5254 Mar 5 2009 CREDITS_ja.html
-rw-rw-r-- 1 root root 5175 Mar 5 2009 CREDITS_pt_BR.html
-rw-rw-r-- 1 root root 4908 Mar 5 2009 CREDITS_zh_CN.html
-rw-rw-r-- 1 root root 5434 Mar 5 2009 CREDITS.html
-rw-rw-r-- 1 root root 1717 Mar 5 2009 DISTRIBUTION.txt
-rw-rw-r-- 1 root root 0 Aug 6 2009 dummy
drwxr-x--- 2 root root 512 Apr 5 11:14 etc
drwxr-x--- 7 root root 512 Apr 5 11:14 gsf1
drwxr-x--- 6 root root 512 Apr 5 11:14 ide10
-rw-rw-r-- 1 root root 1845 Mar 5 2009 LEGALNOTICE.txt
-rw-rw-r-- 1 root root 64275 Mar 5 2009 LICENSE.txt
-rw-rw-r-- 1 root root 37141 Mar 5 2009 moduleCluster.properties
drwxr-x--- 7 root root 512 Apr 5 11:14 nb6.5
-rw-rw-r-- 1 root root 15822 Mar 5 2009 netbeans.css
drwxr-x--- 8 root root 512 Apr 5 11:14 platform9
-rw-rw-r-- 1 root root 6141 Mar 5 2009 README_ja.html
-rw-rw-r-- 1 root root 5692 Mar 5 2009 README_pt_BR.html
-rw-rw-r-- 1 root root 5122 Mar 5 2009 README_zh_CN.html
-rw-rw-r-- 1 root root 5155 Mar 5 2009 README.html
-rw-rw-r-- 1 root root 2913280 Mar 5 2009 THIRDPARTYLICENSE.txt
drwxr-x--- 5 root root 512 Apr 5 11:14 websvccommon1
Our server details are:
{opt/compiler}uname -a
SunOS a03714 5.10 Generic_142900-03 sun4v sparc SUNW,T5440
Any advice appreciated on how to get the debugger working. Ideally, I'd prefer not to uninstall / reinstall if at all possible as we're about to start system testing our executables, and I think a reinstall would require more unit teting and delays to our project (yikes!). But any input would be appreciated here.
Thanks,
Brendan.

Hi David,
First off - thanks for the response. I do have some follow up questions if you don't mind though:
1. When you say the install is corrupted, do you suspect
- the file I downloaded from the website either was corrupted, or was not the correct file for my platform
- the procedure used to install the software was incorrect
- something else
2. Is there a logfile that the sun studio install creates which would indicate an error during the installation procedure? I'm sure our admins who performed the install would have shouted if an error was logged... but on the offchance that the installation does not 'shout loudly' for some errors, I'd like to see a log of the error. At a minimum, I'd expect it to say why the install failed, and what we need to modify to ensure a successful install next time 'round.
3. I successfully compiled my code using the C compiler from the install. My unit tests also look good... does this suggest that the install was at least a partial success, and would you suspect that my recompiled executables are reliable, despite the fact that I cannot launch the IDE?
4. Today, one of our admins telnetted to our unix server - not via exceed by the way, but he did try the following test:
- set his display env variable (he knew he would not get a display however)
- executed the sunstudio script
He did not get the netbeans error, and the process appeared to be running (as I mentioned, without a display) until he killed it. I've asked if they can repeat the test using an exceed session. I thought there may be something on his $PATH that I did not have - unfortunately this was not the case (although, he may have access as 'root' to something that I require to launch the IDE). My question is, would you expect this behaviour if the install was corrupted?
Let me know what you think.
Thanks,
Brendan.

How to include the inner classes in a jar file in netbeans ide

Dear java friends
how to say to netbeans ide that it has to include the
inner classes in the jar file.
(i have one single applet class
with two inner classes that show up
in the build/classes file but not in the jar).
The applet works in the viewer but not
in the browser (I believe because the
xxx$yyy etc should be in the jar)
willemjav

First, please stop posting the same question multiple times:
Duplicate of http://forum.java.sun.com/thread.jspa?threadID=5269782&messageID=10127496#10127496
with an answer.
Second, If your problem is that you can't do this in NetBeans, you need to post to somewhere that provides NetBeans support - like the NetBeans website's mailing list. These forums do not support NetBeans (or any other IDE) - they are Java language forums.

How to connect netbeans ide with ms access?

hi,
i am using netbeans ide (latest one) . I use new project option to create a new project.Then i use java desktop application option to create a java desktop application.Then i get an error unable to get schemas.
Could anybody explain what this error is and how to solve this problem.
Thanking you ,
Mani.

Netbeans related questions belong in netbeans forums.
Alternatively look into JDBC
Mel

Need solution for drivers for odbc connectivity in netbeans ide 7.0.1

Hi,
i'm working with netbeans ide 7.0.1 on windows 7 home basic edition 64-bit, access 2007 professional ,having problems in creating database applicaions ,
problems are 1.unable to connect access databse and unable to find jdbc - odbc driver for access.
Edited by: 882939 on Sep 2, 2011 1:41 AM

scphan,
thanks a lot for your reply! It is helpful! (although not "solved" - alas).
The thing still doesn't work: maybe I missed some magic trick?
If you bear with me, here is what I did:
a) downloaded jdk-6u10-docs.zip
(from "Java SE Development Kit Documentation 6"
-->
https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_Developer-Site/en_US/-/USD/ViewFilteredProducts-SingleVariationTypeFilter)
-- it was unzipped automatically by my Safari downloader, creating the "docs" directory);
b) then I pointed the Netnbeans to this dir (it says "Add ZIP/Folder", so to my understanding the "dir" should work, only faster), --
-- still "Show Javadoc" results in "Cannot perform"... (:-.
Anything I did terribly wrong?
Note that I stared at the http://java.sun.com/javase/downloads/index.jsp for a while before finding the "documentation" link.
Noticeable also that the page starts with "What Java Do I Need?" but doesn't answer that question.
Why does Sun make it so freaking hard for the beginners?..
Does it make sence to ship something without documentation?..
Why doesn't Apple distribution include it for 1.6 although it does for 1.5 and 1.4?..
Why do creators of Java not care that Java actually works out of the box, -- including (and that I think makes my question a Java question) in one of the two most popular Java IDEs?
(The last few sentences are mostly for flounder).

NetBeans IDE for Mono development

Hi! Good day. I just wondered if NetBeans will support editor, debugger, etc. for Mono project? NetBeans claims to be the only IDE we need, it current has the features of PHP, C/C++ development, and why not Mono? Because currently in my work I was writing Mono code with MonoDevelop (since no VisualStudio for Linux), and I don't like this MonoDevelop IDE, that's why I was wondering if NetBeans will support this Mono development? Ahh... Crazy me. Hehe.. Thanks.
Update me if I'm missing something. Thanks again.

Ronillo wrote:
Update me if I'm missing something. Thanks again.Netbeans related questions belong in netbeans forums.
Mel

JSF vs. JSP and IDE Question

I'd like to get an opinion from the forum, I'm looking to build a web application that provides a front-end to a back-end, batch Java app. The back-end app has pre-existing common classes and methods with all of the essential business logic.
My first question is, what platform should I be looking at, Javaserver Faces or JSP? JSF is so new and all of the bugs surely haven't been worked out, but it is the heir apparent new direction of J2EE. JSP is a little more proven, but a little more difficult to work in. This "more difficult" might not be so bad for us, because we've developed most of our back-end app without an IDE or drag-and-drop tools.
My second question regards IDE's. I'm relatively new to OO programming, and I've never used an IDE. So, of the many free IDE's out there (Eclipse, Netbeans, etc.), are there any that you would recommend for your answer to the first question? How large of a process improvement would you judge from a move to an IDE with drag-and-drog functionality?
So, in short, I would appreciate any of your opinions on moving to a new JSF standard as well as your thoughts on IDE's.
Thanks.

If you don't want to sepnd much time and want to do something in the middle between JSF and JSP, you can use JSTL. Lots of cool JSTL components are available for free. Using struts (which is timetested) is also a good idea.
If you have never used any Java IDE, I would suggest you to use netbeans ide. Netbeans is really cool ide and has some good features like refactoring, jsp debugging etc. You will have to use Tomact as your server if you want to use JSP debugging effectively.
Eclipse with right plugin (My Eclipse) would be the best choice but you will have to understand some eclipse concepts before jumping on eclipse. It took me little time to figure out view, perpectives, plugins jargon.
Also My Eclipse is not free but it's very inexpensive - $30 per year.
All these are my experiances. I hope it helps you.
Vaibhav Puranik

NetBeans IDE 4.1 & a class file

Hello, I use NetBeans IDE 4.1 to write my java programs. I've been assigned to write a program that will prompt the user for an input. To make this easier, my University has written a file called "In.java" so we can easily get any type of input from the user. For example if we want the user to enter his/her name, we would write:
System.out.println ("Please enter your name: ");
String name = In.getString(); //allows user to enter a string
The "In.java" file is supposed to be kept and compiled in the directory I'm working in. I kept it in C:\j2sdk1.4.2_09 and it works fine when I write a program in notepad but not NetBeans IDE. It does not recognize the "In.class" file. Any way to get around this? Thanks in advance.

NetBeans 4.1 is bundled with J2sdk1.5.0_04. Check your NetBeans classpath and see if it is pointing to the newer sdk.
If so, it needs to be changed to point to your older SDK...
... or, get your In.class file into the current NetBeans classpath...
... or read up on, and use the new Scanner class in the new sdk.

Swing application with JavaHelp crashes outside Netbeans IDE.

Hi guys I have developed a small swing application in Netbeans IDE. I used the following code inside the IDE for JH.
public void createHelp()
       try {
               URL hsURL = new URL("jar:file:eDictionaryHelp.jar!/eDictionaryHelp/eDictionary.hs");
               hs = new HelpSet(null, hsURL);
       catch (Exception ee)
        // Say what the exception really is
        System.out.println( "HelpSet " + ee.getMessage());
        System.out.println("HelpSet "+ helpHS +" not found");
        JOptionPane.showMessageDialog(new JFrame(), ee.getMessage(), "Error", ERROR_MESSAGE);
        hb = hs.createHelpBroker();
   }When I run the program inside the IDE and and click on the corresponding MenuItem.. JavaHelp comes up as it should! No problems with that.
But when I build the project and tried to run it from the .jar file in the PROJECT_HOME/dist/ the swing got displayed till this function was called. and then it simply crashed.
Investigating further and commenting out one line at a time and compiling I found out that whenever the hs = new HelpSet(null, hsURL); is encountered, the app crashes (it doesnt throw any error).
But as I said this is not the case when i run and compile inside the IDE. I only get this problem when running the app from outside the IDE.
I have tried all kinds of combinations of the URL .. for eg ( I am aware of Bug 4149782)
ClassLoader cl = this.getClass().getClassLoader();
try {
               URL hsURL = HelpSet.findHelpSet(cl, helpHS);
.What can be the problem guys? Any suggestions?
Thanks!

Anyone has an answer on this?
I am facing the same problem.. I am using NetBeans 5.5
arijit_datta, do u have a solution for this problem already?
Thanks,
SK

How to build jms files using netbeans ide

hi,
i am using the latest netbeans ide to build a simple jms java file,
but i am getting this:
init:
deps-jar:
Compiling 10 source files to
C:\wrox\pro_jms\Chapter04\Test\build\classes
C:\wrox\pro_jms\Chapter04\AccountsDepartment.java:4: package
javax.jms does not exist
import javax.jms.*;
C:\wrox\pro_jms\Chapter04\AccountsDepartment.java:11: cannot find
symbol
the netbeans ide i am using is jdk_1.6, which when i use directly to
compile in command line mode, works. can anyone tell me why this is
happening?
thanks.

I take it that you are trying to build a Java applicaiton that uses JMS API. To do it in netbeans using SUN OpenMQ I usually follow those steps:
1) I create a new project
2) I add JMS library. This is a library that I had created in netbeans using Library Manager. It consist of jms.jar ( this jar file contains the definition of JMS API). Next jar file is the implemention of the JMS API, in case of SUN OpenMQ it's imq.jar, but if you're using a different JMS provider it may be a different file. The last jar file in my JMS library is usually fscontext.jar, this jar file provides JNDI access to a file based store. Again if you're using something like ldap then it would be a different jar file.
That's basicly it - Tom

Unable to configure Netbeans IDE for IDM

I am trying to configure Netbeans IDE for my IDM project. I am using Netbeans 6.8 with the compatible plugin with JDK 1.6.
For creating the project, I select Identity Manager Project and then provide the war file, that I create for my existing IDM installation(so that Netbeans IDM project is connected with my existing IDM project), and then select Configure repository later.
When I perform Build, I get the following error.
<Error during build>
Indexing C:\Documents and Settings\Administrator\My Documents\NetBeansProjects\Idm-811\custom\WEB-INF\config\custom-init-postprocess.xml
C:\Documents and Settings\Administrator\My Documents\NetBeansProjects\Idm-811\idm-staging\sample\admins.xml: Unexpected error parsing: com.sun.idm.idebridge.util.InternalError: com.waveset.util.InternalError:
==> java.lang.IllegalStateException: Error attempting to encrypt: Could not initialize class javax.crypto.SunJCE_b
com.sun.idm.idebridge.util.InternalError: com.waveset.util.InternalError:
==> java.lang.IllegalStateException: Error attempting to encrypt: Could not initialize class javax.crypto.SunJCE_b
C:\Documents and Settings\Administrator\My Documents\NetBeansProjects\Idm-811\nbproject\nbjdk.xml:8: The following error occurred while executing this line:
C:\Documents and Settings\Administrator\My Documents\NetBeansProjects\Idm-811\build.xml:384: Object validation failed; see object validator error output for details.
BUILD FAILED (total time: 21 seconds)
</Error>
Anyone with similar issues, and workarounds would be appreciated.

Use Netbeans 6.1 and Sun Identity Manager 8.1.1 and download plugin com-sun-idm-ide_8.1.0.20080630.nbm from http://java.net/projects/identitymanageride/downloads
Currently i have installed it and it is working fine for me.
OR
re-downloaded idm ide-bundle.zip respective to your idm version and try to craete project in Netbeans 6.1 and 6.8.

Problem in Connectivity to Derby Database in Netbeans IDE

I am using the newest version of Netbeans IDE
I already set the variable for JAVA_HOME and DERBY_HOME along with the path variables.
I am trying to connect to Database in Network Mode
using the following code
try
Class.forName("org.apache.derby.jdbc.ClientDriver");
catch(ClassNotFoundException exception)
exception.printStackTrace();
but it is giving the runtime error that "Unable to load Driver"
Please help me to get through this

Try adding the following to your class:
import org.apache.derby.jdbc.ClientDriver;
If it produces an error, your driver *.jar file is not in the classpath.

BEGINNER - NetBeans IDE

Hi
In NetBeans IDE >> Palette Window >> JFrame properties, I set the background color to (for example) blue but when I run with F6 key, the appearing window is always at gray color. Why?
Thanks in advance

hi ,try this
put a JPanel on the JFrame and set background color property of the JPanel .

Cannot find class CustomerFacadeRemote in NetBeans IDE 5.0 Quick Start Guid

Hi,
I am new to Sun Java Studio Enterprise 8.1. I am follwing NetBeans IDE 5.0 Quick Start Guide for J2EE Applications example and got two following errors:
C:\SunStudioWS\CustomerBook\CustomerBook-war\src\java\web\CustomerDetail.java:41: cannot find symbol
symbol : class CustomerFacadeRemote
location: package ejb
ejb.CustomerFacadeRemote custFacade = lookupCustomerFacadeBean();
C:\SunStudioWS\CustomerBook\CustomerBook-war\src\java\web\CustomerDetail.java:41: cannot find symbol
symbol : method lookupCustomerFacadeBean()
location: class web.CustomerDetail
ejb.CustomerFacadeRemote custFacade = lookupCustomerFacadeBean();
2 errors
C:\SunStudioWS\CustomerBook\CustomerBook-war\nbproject\build-impl.xml:299: The following error occurred while executing this line:
C:\SunStudioWS\CustomerBook\CustomerBook-war\nbproject\build-impl.xml:141: Compile failed; see the compiler error output for details.
BUILD FAILED (total time: 1 second)
Here is the code:
* CustomerDetail.java
* Created on July 23, 2007, 3:27 PM
package web;
import java.io.*;
import java.net.*;
import javax.servlet.*;
import javax.servlet.http.*;
* @author yl
* @version
public class CustomerDetail extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<html>");
out.println("<head>");
out.println("<title>Servlet customerDetail</title>");
out.println("</head>");
out.println("<body>");
out.println("<h1>Servlet customerDetail at " + request.getContextPath () + "</h1>");
String customerNr = request.getParameter("customer_nr");
if((customerNr != null) && !(customerNr.equals("")))
try{
ejb.CustomerFacadeRemote custFacade = lookupCustomerFacadeBean();
out.println("Customer's info for nr. " + customerNr + ": " + custFacade.getCustomerInfo(
Integer.parseInt(customerNr)));
}catch(javax.ejb.FinderException ex){
out.println("Customer with nr. " + customerNr +" not found");
out.println("<form>");
out.println("Customer number: <input type='text' name='customer_nr' />");
out.println("<input type=submit value=Select />");
out.println("</form>");
out.println("</body>");
out.println("</html>");
out.close();
// <editor-fold defaultstate="collapsed" desc="HttpServlet methods. Click on the + sign on the left to edit the code.">
/** Handles the HTTP <code>GET</code> method.
* @param request servlet request
* @param response servlet response
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Handles the HTTP <code>POST</code> method.
* @param request servlet request
* @param response servlet response
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";
// </editor-fold>
private web.ServiceLocator serviceLocator;
private web.ServiceLocator getServiceLocator() {
if (serviceLocator == null) {
serviceLocator = new web.ServiceLocator();
return serviceLocator;
private ejb.CustomerFacaderRemote lookupCustomerFacaderBean() {
try {
return ((ejb.CustomerFacaderRemoteHome) getServiceLocator().getRemoteHome("java:comp/env/ejb/CustomerFacaderBean",ejb.CustomerFacaderRemoteHome.class)).create();
} catch(javax.naming.NamingException ne) {
java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,ne);
throw new RuntimeException(ne);
} catch(javax.ejb.CreateException ce) {
java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,ce);
throw new RuntimeException(ce);
} catch(java.rmi.RemoteException re) {
java.util.logging.Logger.getLogger(getClass().getName()).log(java.util.logging.Level.SEVERE,"exception caught" ,re);
throw new RuntimeException(re);
Thank you very much for any help.
ylou

In the code you have posted, some places refer to '.CustomerFacader' while others refer to '.CustomerFacade' leading to issues.
Also: Have you considered using NetBeans 5.5.1 as an alternative to JSE 8.1?
http://forum.java.sun.com/thread.jspa?threadID=5192837

Java 1.4.2 with NetBeans IDE 3.5 - Error Message, please help

Hello, I have downloaded the "J2SE v 1.4.2 with NetBeans IDE v 3.5 Cobundle" for windows.
I ran the install, everything went fine, but when the install finished it said there was an error and to please refer to the log file.
Here is what the log file says:
"Installing J2SDK..."
"Finished Installing J2SDK..."
(Jul 1, 2003 7:53:14 AM), Setup.product.install, com.sun.installer.InstallJ2sdkAction, err, Error occured while installing [0] -> D:\Program Files\j2sdk_nb\_uninst\custom-install.bat "D:\Program Files\j2sdk_nb\install.log" "D:\Program Files\j2sdk_nb\j2sdk1.4.2\" D: "D:\Program Files\j2sdk_nb\_uninst"
Now when I try to run "NetBeans IDE 3.5" I get an error message:
Cannont load jvm.dll
Does anyone know how to resolve this, I have tried uninstalling and re-installing and I get the same problem.
Thanks,
-Mike

Hello, I have downloaded the "J2SE v 1.4.2 with
NetBeans IDE v 3.5 Cobundle" for windows.
I ran the install, everything went fine, but when the
install finished it said there was an error and to
please refer to the log file.
Does anyone know how to resolve this, I have tried
uninstalling and re-installing and I get the same
problem.
Thanks,
-MikeHi Mike,
Even I got a similar error message inspite of trying to re-install atleast 10 times! So I gave up and did this:
1) I downloded J2SE SDK 1.4.2 seperately.
2) I then downloded JPad Pro IDE (latest version).
Now both are working really fine for me. :-) Could'nt be bothered to try again and again.
Its up to you if you want to get the NetBeans installation done but all I wanted was a good IDE and the latest version of the JDK. I have been using it for the last 3 days and it is working perfectly fine!
Regards :-)
Vijay

Netbeans IDE question

Similar Messages

Maybe you are looking for