Netbook 1000: Shared Mic/Headphone input - What type?

I am considering an HP 1000 series Netbook. But the shared Mid/Headphone jack has me worried. I can ONLY use this, if I can make an interface cable that can take seperate mic and earphone connections. I have a piece of hardware that has an audio output and mic input that must be connected to the HP shared mic and headphone jack.
What I don't know is what type of jack or interface the shared jack is. I haven't found anyone who can tell me for sure.
1) Is it a propietary device interface?
2) Does it accept a 2, 3 or 4 connection plug?
3) Is it a standard length or is it a special plug that can only be obtained from HP?
4) Can the mic and earphone connection be used at the same time?
5) What is the plug connection description (tip, 1st contact, 2nd contact, etc)?
I'm hoping it's just a 4 connection plug with standard stereo earphone for the first 3 contacts, and a fourth contact for a mic input. But I need to know for sure.
If anyone has a device that uses this jack, that has BOTH a mic and headphone, that works correctly, can you answer these questions above?
I don't want to buy the HP 1000 series to find out I can't use that jack, for my application.
Thanks,

Since my stereo/mic headset works great with it, I conclude that it is what is called a TRRS jack. I am in the process of ordering a "TRRS plug" Y to 2 "TRS jacks" cable (see http://www.kvconnection.com/product-p/009-243.ht). I have every confidence it will work fine.

Similar Messages

How do I connect my headset (split mic/headphone input) to my MacBook Pro Core 2 Duo?

How do I connect my headset (split mic/headphone input) to my MacBook Pro Core 2 Duo? I can't get it to work, but did previously at one point. Trying to use it with Rosetta Stone and I cant get it to recognize my speech at all, says the headset isnt plugged in. Went to setting and made sure it was on line in and it is not registering their either. Help!

Use something like this:
http://www.buy.com/prod/gtmax-usb-2-0-to-3-5mm-microphone-speaker-audio-sound-ca rd-adapter/q/sellerid/29345858/loc/111/213812694.html

I bought (used) a hp mini 110-1000 netbook that at the time had what appeared to be windows 7 starte

I bought (used) a hp mini 110-1000 netbook that at the time had what appeared to be windows 7 starter on the machine. After booting into windows, it displayed the blue screen of death. I didn't locate a recovery partition or was able to access windows system restore, so I ordered a windows starter usb system recovery and received it today. After trying unsuccessfully to reinstall windows I am at a loss. It gets about a third of the way installing the software on the system and then it says it failed. I ordered by both the model number (110-3000 , or product wy699av) and serial number {Removed for privacy}. I am at a loss as to what to do, as I have bought a usb recovery media and it won't continue the install. Nowhere on the netbook is a sticker declaring the os or the model number so i researched by the other model #'s i found listed..Please help, and thanks.

I dont know how they had windows starter on this unit, but the sticker is for xp. Guess I bought a recovery usb stick that is usless to me, and now I'm stuck with it. I also checked the bios and it said it had a non vista os, after I found out how to get into it. I still don't understand how I was able to order the win 7 starter recovery usb, even after I input the serial number into the form. I would have thought it wouldn't allow me to order an incorrect os.

What type of connector do I need from my Macbook Pro Retina laptop for sound out to audio speakers with regular audio input jacks?

I am wanting to use regular audio speakers with traditional audio input jacks to serve as output speakers on my Macbook Pro Retina display laptop. What type of cable would I need to connect?

http://www.amazon.com/Belkin-Audio-Cable-Splitter-1-Mini/dp/B00004Z5CP

Send for shared review - What type of Web server folder works?

Hello all,
Can someone please explain to me what type of web server folder works with "Send for shared review"?
I have created a folder on my GoDaddy server account with full permissions... http://webservername.com/Adobe_Test but after clicking Next, I see the error, "The Shared Folder Location is not valid. Click OK and check the Status field for more information."
1) It isn't valid? What are the valid server requirements?
2) "...check the Status field for more information."? What Status field?
It would have been great if I could use a Google Docs folder but that failed as well.
What must I do to unlock this neat feature?
Thank you

Thanks CtDave.
I ended up building a WebDAV server and I am now encountering a bunch of new issues. Such as:
From my workstation, working with Acrobat.
- After making comments. I click the top button "Publish Comments" - this works well - no errors. But when I attempt to exit the PDF, Acrobat wants to save the document. Attempting to Save results in a read-only error. After trying this, Acrobat gets into a loop where there doesn't appear to be a way to exit Acrobat (other than by Save As new file name):
Even worse... I understood that reviewers only required the Adobe Reader in order to comment. This doesn't seem to be the case.
When I emailed a test document for review, this is the message that pops up:
All that is available is the original content (none of the review comments are available).
Any ideas?

Whats types of inputs can be used with DAQ 6527? (PNP or NPN)

I need to know what types of input device (PNP or NPN) can be used with a DAQ 6527.

Greetings,
The digital inputs of the 6527 require TTL signals. As long as your device, whether it be a pnp or npn transistor, outputs a TTL signal, it will be compatible.
Regards,
Justin Britten
Applications Engineer
National Instruments

What type of li-ion battery charger for Zen Mic

Hi,
What type of battery charger do I need to buy for the removable li-ion battery the Zen Micro uses?

But, I want a charger!
I will buy an extra battery. So that while I am using my Micro, I can re-charge the other battery. That is why I am buying a player with a removable battery.
Problem is that Creative sells the extra batteries, but I don't see a charger listed.

What type of soundcard ?

Dear all,
bit of a silly question, but can someone tell me how to connect 5 speakers to my laptop ?
I bought the Logitec X 530 speakers ( total of 5 ).  I am not sure , but the Logitec manual says that with a
2 channel soundcard i wont hear the sound from the rear speakers.  I am not sure what type of soundcard
my machine has.   Was this a waste of money then ? the subwoofer and two speakers work fine.
Would be nice to have the other three speakers working as well.   any special devices need for this ?
And where would i find out what soundcard my laptop has ?
laptop is HP G61-410SA Tango.
thanks for your help and best regards from
kentishtown

mreibsamen wrote:
It's phantom powered with a little "in use" light. Got it on ebay for dirt cheap. I'm using it to power my behringer C-1U usb mic, and my sony dynamic stereo headphones. both appear to be recognized and have power to them yet still having the crackling problem
In that case, I'd definitely, definitely get an external power supply for it. You're running this with a notebook, and just because the USB spec says you can take 500mA out of a USB port doesn't mean that manufacturers are obliged to provide that much - and in the case of anything portable, they invariably don't. And if you are running Sony dynamic headphones, you are probably using up pretty much all of the power that the laptop can provide. Not only that, but the power supplied to run the device this way is subject to an electronic 'negotiation' with the PC - and the results of this can vary dynamically; another source of weird things happening.
It's pretty common to find that the majority of USB hub problems evaporate when a sensible power source is applied!

IMac: How to use internal built-in microphone when Bose mic-headphones are plugged?

Hi there,
I use my Bose AE2 for Lync conferences in my iMac, but the problem is that, when the headphones are plugged I seem "obliged" to use their made for iPhone/Mac mic.
The problem is that, however, the sound through this Bose's mic is terrible so the others in the conference can't properly hear me. So I just want to use the internal computer's mic, and it seems not possible when the headphones are plugged.
In that situation, Sys Preferences > Sound > Input, only shows "External microphone" and "Line in".
Meaning, what normally is "Internal microphone" automatically, when plugged, turns into "External microphone" and that's it. It's not possible to use the internal mic anymore if mic headphones are plugged.
Do you know any way to workaround this?
My OS is 10.6.8 (it's work's iMac), but I'm afraid this is not different in 10.9.X.
Many thanks in advance!

Hi, I plug in the headphones set with a regular headphones jack plug. They don't go with USB.
Thanks for answering

Need a query to determine what type of access an account have in ERP

Need a code to check what type of access an account (username) and its responsibilities have in ERP - Is it Inquiry only or it have update access and/or ability to run concurrent jobs.
It means
A column (Has Update Capabilities?) should be placed in a report where there are different columns containing Form Name etc.
It should display like below
Update Capabilities --> Put Yes in this field
No Update Capabilities --> Put No in this field
Job Scheduling Capabilities --> Put 'Yes - Job Scheduling'
Thanks in Advance.

What I mean is,
Where can I know the update capabilities for a Form or a function
I was asked by my manager to make a report to input the UserName so that the output displays the UserNmae and its associated Responsibilities and the Menu prompts registered with the responsibility(Tree Structure) and the User Form Name and User Function Name and the Update Capabilities.
For the Update Capabilities I have to display 'Yes' if the form/function has update capabilities or not.
And have to check whether it has Job Scheduling Capabilities or not.
For this (Update Capabilities), which tables I have to refer?
Thanks.

For DIFF or NRSE analog input what is the "R ext" that is needed for grond?

I am trying to input a 0-10v signal to my daqpad-6016. A resistor indicated as an R ext is required between the AI- or AI SENSE and AI GND. What type of resistor is this and how do I determine it's value?
Thanks!
Attachments:
daqpad-6016.PDF ‏46 KB

The value is not critical. I generally use 10K.
This resistor is used to avoid the drift of the signal due to the input bias current of the DAQ card.

HT201180 What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

What type of Fire Wire cable to use to connect MacBook Pro 2009 to tape-based Sony TRV720 camcorder

USB is the slowest. Firewire is faster. eSata is the fastest (and will be superceded by Thunderbolt). The old Fire was 4 pin (Firewire 400 and is essentially obsolete), new is 9 pin, Firewire 800. All of the will transmit data, simply a different speeds.
For eSata connectivity, you MBP must have an express card slot (and the appropriate eSata connection card) and you external enclosure must have an eSata input. eSata cables will only transmit data, therefor it will require power by Firewire or USB cables.
Ciao.

How can I find out what type of data is being sent over one of the phones on my plan?

I have a few phones under a shared family plan.
I wanted to know what type of data is being sent over them, wether this is VOIP, Streaming Audio or Video.

I think the only way you can find out is if you look at the device itself.

Is there a way to track down what type of content was sent in an iMessage?

Is there a way to track down what type of content was sent in an iMessage?
There was some data sent (that I saw from my cell phone provider) at around 7AM one morning while I was in bed. I am concerned as to what this data was and would like to find out if it is possible to trace what the content was? My cell provided indicated that they do not know what type of data it was.

Hello Michael:
I have not yet seen a
good approach to using that information (short of
deleting the account).
better search some yourself Barry <G>
if something runs fine in another account - one can isolate the cause to one of the plist files in the main acct Home/Library/Preferences/ or possibly an add-on in Home/Library/Internet Pug-Ins or ...Input Managers for example.
If there is the same problem in the new acct - you can discount anything with the main acct user library - plists,caches,plugins,input managers, the whole lot.
A useful tool is Console - found in Applications/Utilities/ keep it running while the 'problem' in question crops up & see if any messages pop up in either the system log or console log. Sometimes these will point straight at the problem area, other times no help at all.

How to bind complex input/output types in web service data control

Hi,
I have created data control using external web service for simple input & output data type and its working fine.
But I don't know how it can be done for complex data types.
My external Web services have complex input & output types. Such as java object which contains another java object again it contains another java object or arry or java collection etc.
Each my service has one complex input data type and for this no user input is require so how I can do it without using any component for it.
I want to bind my page components with this input & output type.
What is the best approach to do this and how to bind screen component.
Regards,
Devang

Hi,
Thanks frank.
I already check this link before posting this so if you have any other link then kindly reply.
Regards,
Devang

Netbook 1000: Shared Mic/Headphone input - What type?

Similar Messages

Maybe you are looking for