Netbook Mini 110-3830NR How do I create a restore image on a flash drive

I have a HP Mini 110-3830NR Netbook running Windows 7 Starter.
I want to create a restore image to original factory state.
The user manual recommends that I create a restore disk.
It further states that to create a restore image on a USB device, I need at least
a 16GB device.
Therefore I purchased a Hp v165 16GB flash drive that actually contains
14.8 GB of user space.
I could not find the correct info about creating the disk on the HP support
web site so I chatted with an HP Support technician. She eventually gave me
a link to a procedure that would create a restore disk for me.
Then she said I needed a 32gb flash drive !!
Is the user manual or the technician correct ??
Can I use the 16GB (14.8 actual), or must I buy a 32 GB flash drive ??
Thank You fljim

I would just try to create it, the recovery creator should tell you at some point if it is big enough or not, orignally 8gb was big enough for most W7 system's HP sold, but as time passed they had to upgrade the size recommendation to 32gb.
the 16gb should be large enough for your model.
This HP document says al least 8gb minimum, use 16gb for best results, very confusing, I agree
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01890478&lc=en&cc=us&dlc=en

Similar Messages

Creating a restore image on an external drive with package install options

Hi,
I'm looking to use a combination of tools maybe Deploy Studio, System Image Utility etc to create an image that isn't Netbooted but rather on an external drive (a fast Thunderbolt raid enclosure) - a restorable image which will contain OSX setup with all the essential applications my users require.
That bit is fairly easy using some clone software but I want to do a couple more things. I need to create a Bootcamp partition on the computer and I want this all to be as hands off as possible. I've looked at Winclone in which I can create a Bootcamp clone and even put it in a deployable package file which in theory will create the partition and restore the clone when run.
Ideally id be able to make a restore image that boots, restores and also gives me package options, allowing me to chose the Windows 7 or Windows 8.1 package file in the image to deploy and also whether to deploy another package file which will include 3 optional applications for the user depending on their choice. If I was allowed at restore to decide which packages if any should be run id be able to create one single restore image.
Does anyone know if this possible?

Found the answer. It was formatted for Windows.

How do i burn an ISO image to a flash drive?

I tried to use disk utility and dragged my ISO file into the source box and then my flash drive into the destination box. When i clicked restored and entered in my password i got a dialog box saying "Restore failure, Could not validate source - Invalid arguement". If someone could help me that would be great. I was trying to burn Windows 7 so that way I could install it in bootcamp because I need Windows for school.

Launch Disk Utility and select File: New: Disk Image From Folder. In the window that appears, navigate to the desired folder and then click on Image. Give the image file a name, and click on Save when prompted. That’s it.

How do I create a duplicate image inside the same page? Then how do I change the color of that image

how do I create a duplicate image inside the same page? Then how do I change the color of that image from black to red?

Hello there!
Here is one way to create a duplicate image and colorize it. As you can see below, I have one image right now, that I want to duplicate.
My layers panel looks like below.
To duplicate your image, click the downward arrow on the right side of your Layer Panel.
Select Duplicate Layer. This will duplicate the layer that the image is on.
Select "OK" to approve the duplication.
As you can now see in the Layers panel, the image is duplicated. The new layer is now at the top of the Layer panel.
Now to colorize your image, go to Window > Adjustments.
The Adjustments panel will now be opened. Select the Hue and Saturation icon as seen circled in red.
The Hue and Saturation propertied panel will be opened. I selected "Colorize", and adjusted the hue and saturation bar to achieve the level red in my photo.
As you can see below, the image is now red.
Now i want to make sure only ONE of my image layers is red. I moved the Hue and Saturation layer to only be on top of the bottom layer. The image on the top layer now will not be affected by the red.
Select the move tool, so I can now move the image layers so we can see both of them.
With each image layer selected, you can take the move tool and move the images. I moved mine on top of eachother and you can see my red layer (bottom) and the non red layer (top).
I hope that helps. i have also included helpful links.
Please post back with any questions,
Janelle

How do I create a disk image for windows 7, using a windows computer for USB bootcamp for mac?

Hi There, I have just bought a new 2013 iMac.
Spec: 3.4 GHz intel core i5, 16GB 1600 MHz DDR3 Memory , NVIDIA GeForce GTX 775M 2048 MB Graphics with OS X 10.9.4.
How can I create a 'disk image' from a windows 7 professional 64bit installation DVD using a windows laptop with windows 7 Operating system on? I want to transfer this 'disk image' (ISO?) to a USB ready for installing windows onto my 2013 iMac using bootcamp? I want to use bootcamp from a USB as I have no disk drive for the installation DVD on my iMac. I hope all this is clear.
Thank you. Joe

Yes, that's correct, at least not directly. You can create a blank disk image, copy the file to the mounted disk image, then burn the image to a CD/DVD.
Open Disk Utility and select Blank Disk Image from the New menu. Provide a name, Save location, and select the image size from the drop down menu. Leave Encryptions at None and Format as read/write. Click on the Create button.
After the image file appears the "removable" disk should be automatically mounted. If not double-click on it to mount it. A "removable" disk icon will appear. Drag the file you want to place on the disk image to the "removable" disk icon. The eject the "removable" disk icon. Now select the disk image file in the DU left side list and click on the Burn icon in the DU toolbar. Be sure to have a blank disc ready.
The above is actually the "long" way to do this. A much easier way is to simply insert a blank CD or DVD into the optical drive. The Finder will pop up a dialog asking what to do. Select the option to mount on the Desktop. You will now see a disc icon on the Desktop. Drag the file you want to burn to the CD/DVD, right-click or CTRL-click on the disc icon and select Burn from the contextual menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How can I create a disk image of snow leopard installer disk from my Imac which runs it?

how can I create a disk image of snow leopard installer disk from my Imac which runs it? It came without DVD installer, and I want to make a copy of it's OS installer but can't find out how.

You need to have the disc in order to create disk image of snow leopard installer disc. What did your machine ship with? If something later than SL, then why? If earlier, then you can buy the SL installer disc and make the disk image.

How can I create clearer, sharper images and buttons in Muse?

How can I create buttons and images that have a vector like clarity? When I upload images (buttons, jpegs and pngs) a lot of the time they seem to have a slightly fuzzy quality to them. I have read previous posts on this matter and none have helped. Any feedback on this will be greatly appreciated. Thanks

When you place your images in exactly the size you saved them in Photoshop or whatever, Muse doesn’t touch it.
The quality in this case is the quality you saved the image.
The best way is, to examine in Muse the available pixel size of the image and then use Photoshop to obtain this size
A helpful widget to examine the potential size of an image in advance, is the "lore ipsum"-Muse-widget, that you find in the free widget collection "Andrew’s Prototypes":
Andrew Prototypes | Exchange | Adobe Muse CC

How do I create a single image using PSE12 from multiple originals where each original is still separate?

How do I create a single image using PSE12 from multiple originals in which the originals are still separate (i.e. side by side or arranged in a square)? I could do this in PSE2, but can't find how to get PSE12 to do it.
Grecophile55

In PSE2 there was a single photo-merge. I browsed all my images and I could then click and drag each to its new position before saving. There doesn’t seem to be a similar facility in PSE12.

How do you create a still image from a video using IMovies 11?

How do you create a still image from a video using IMovies 11 on a Pro Mac?

The simplest way is to do a simple screen capture.

How do you create a bootable image accessable via OPTION at boot time...

Hello. Is there a way to create a 'bootable image' of a hard drive and save on my raid and access it via the OPTION menu (hold option key at boot)? I would like to create a OSX bootable drive and then save the whole thing in a file. That way I can set up different configs and just boot into whichever I wish to use. Say, one to rescue a crashed hard drive, etc.
Information appreciated. Thank you,
--Scott
Powermac G5 'Quad' Mac OS X (10.4.6)

CCC is used to make a bootable clone. It will also make an image file that can be installed using ASR or that can be used with NetBoot. It does not make a bootable image because you cannot boot from a disk image file. The image file can also be burned onto a CD or DVD, but you will not be able to boot from it because a CD/DVD is not a writeable device, and OS X must be able to write to a startup device.
Another utility, BootCD (not yet usable with Tiger), worked around the problem by rewriting some of the startup code in OS X to force the making of a RAM disk, then moving some of the startup files to the RAM disk and designating the RAM disk as the startup device. Although BootCD will make a bootable and customizable CD using Panther, it does not work with Tiger.
Any questions?

How to install Win 7 on Mac using USB flash drive....???

How to install Win 7 on Mac using USB flash drive....???

clintonfrombirmingham wrote:
I thought that installation through Boot Camp required, without hacks, a physical optical disc to install Boot Camp? I don't use it any longer since I run XP under Parallels, but I would swear that you have to use a disc, and not a USB thumb drive, to install Windows?
Maybe some real Boot Campers will visit this thread...
Clinton
If you have the Media you can use it to create a bootable USB key via boot camp assistant.
It will create the usb and has the option of pre-downlading the drivers and bootcamp utilities for windows.
It is pretty much all automated and quite simple.

How can I save and share movies to a flash drive in Premier Elements 9

How can I save and share movies to a flash drive in Premier Elements 9
mobile phones and other devices - only give for ipods and iphones
export files for viewing on computer - windows media etc
I am experienced at burning dvds on the Adobe Premier Elements but new to sharing movies to a flash drive.
Please help!

Moti
Premiere Elements 9.0/9.0.1 on what computer operating system?
1. USB Flash Drive.
Go to Share/Computer/ make your export choice.
In the Save In field for the preset selected, browse to and select the USB Flash Drive
2. Windows Media
Share/Computer/Windows Media and select appropriate preset to get you .wmv file
3. See Share/Mobile Phones and Players
Remember you can customize the settings under the Advanced Button/Video Tab, Audio Tab, Multiplexer Tab of
the preset selected.
Please review the Premiere Element 9 Help PDF, Chapter 15, Saving and Sharing Movies.
http://help.adobe.com/archive/en_US/premiereelements/9/premiereelements_9_help.pdf
The above is an overview. We can go into more details after you review the above.
Thank you.
ATR

How do I restore iTunes library from flash drive backup?

How do I restore iTunes library from flash drive backup?

brigdool wrote:
How do I restore iTunes library from flash drive backup?
HI Brigdool,
It depends how you made the backup.
If you copied your entire iTunes folder onto the flash drive, just copy it back to the appropriate place on the computer.
If you copied individual folders or files, add them back to iTunes by inserting the flash drive in your computer, and then dragging the files into your "Automatically Add to iTunes" folder.
The first method recreates your library as it was, with all playcounts, playlists, etc. The second method builds a new library with the same content.

HP Mini 110-3520ca constantly restarts when trying to restore from usb flash drive

Hi,
I have a HP Mini 110-3520ca that I upgraded to Windows 8, but was having issues with freeze ups and shut downs so I decided to go back to Windows 7 Starter. When I tried to restore to factory default the files were corrupted and I couldn't restore from the recovery hard drive or my external back up files. I ordered the recovery USB flash drive from HP and tried to restore from it. It completes the Recovery Preparation and the Software Installation finishes, Windows starts to load, but Ithen it goes back to welcome to Recovery Manager. When I try to start Windows without the flash drive I get an error log that is below. Can someone tell me how to fix this or what needs to be done to get my Windows working again, any help would be greatly appreciated.
Carol.
Error Log:
Component: TDC Preinstall Diagnostic Tools for Windows 7 - TDC
Timing: Factory Update
This is not a Regional SKU
This is not an RCTO P2PP SKU
Error: Different LOC# detected:
Error: SKU number LOC# = 00
Error: REGSKU/OptionDashCode.ini value for ABC = 12
Error: SKU number incorrect for this LOC#=ABC.
Next Step: Please dash sku number with xxxxxx-12x
Next Step: Or use EEPROM and change LOC# in either SKU Number or CTO Localization Code
[17:16:38.37] ------------------------------------------------------------------------------------------
***CTO Error condition has been dtected in [Factory Update] phase !! ***
[17:16:38.38] Suggest to create PIN-log and send to TWN PDC NB-PreinPM for further analysis ...
[17:16:38.38] ------------------------------------------------------------------------------------------
[17:13:54.75] Start BBOffline.cmd...
UPDrv=[C:]
[17:13:54.77] Set UIA Error Code to 951
[17:13:55.39] WinPE is 32bit.
[17:13:55.39] Starts [FixUps].
[17:13:55.41] ---------------------------------------------------------------------
[17:13:55.41] FixUps.cmd...
[17:13:55.41] create overall progress info...
[17:14:15.89] FixUps.cmd completed...
[17:14:15.89] ---------------------------------------------------------------------
[17:14:15.91] Starts [Tweaks for SSRD].
[17:14:15.92] ---------------------------------------------------------------------
[17:14:15.92] SSRD Tweaks to change user default locale...
[17:14:15.92] Copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES.DLL.
[17:14:16.09] Run "Dism.exe /image:C:\ /Set-SKUIntlDefaults:en-US -image:C:".
[17:14:23.50] ---------------------------------------------------------------------
[17:14:23.50] Launch PININST.exe for Offline ...
[17:14:33.78] Starts [Sleep 10 sec].
[17:14:43.86] Starts [Create RStoneFUpdate.INI].
[17:15:20.91] Starts [create 1GB Pagefile for offline].
Volume in drive C has no label.
Volume Serial Number is 868D-C760
Directory of C:\system.sav\bbv
10/27/2014 05:15 PM 1,073,741,824 pagefile.sys
1 File(s) 1,073,741,824 bytes
0 Dir(s) 38,502,694,912 bytes free
[17:15:21.04] move boot.wim from FactoryUpdate to 2ndCap.
[17:15:21.10] Brand detection.
[17:15:21.80] ---------------------------------------------------------------------
[17:16:10.26] Start SysID Check...
[17:16:13.30] Start Option Code Checks...
SKU_DEF_COUNTRY=[39]
SKU_DEF_SYS_LOC=[fr-CA]
Reset country in administrator...
Reset country in Default user...
Reset System localed
Deployment Image Servicing and Management tool
Version: 6.1.7600.16385
Image Version: 6.1.7600.16385
Reporting offline international settings.
Default system UI language : en-US
System locale : fr-CA
Default time zone : Pacific Standard Time
User locale for default user : en-US
Location : Canada (GEOID = 39)
Active keyboard(s) : 0409:00000409
Keyboard layered driver : PC/AT Enhanced Keyboard (101/102-Key)
Installed language(s): en-US
Type : Fully localized language.
The operation completed successfully.
Updated System Locale info..
[17:16:27.37] Start PIN Tweaks...
[17:16:28.38] ---------------------------------------------------------------------
[17:16:28.40] PIN Tweaks to hide All for BurnBoot BBV and BBV2 on restored image...
[17:16:28.40] ----------------------------------------
[17:16:28.40] Tweaks for OOBE's Unattend.xml
[17:16:28.40] to pick up the proper file...
[17:16:28.41] ----------------------------------------
[17:16:28.41] rename unattend.org to unattend.or_
[17:16:28.44] ----------------------------------------
[17:16:28.44] without Light Sensor..
[17:16:28.48] ----------------------------------------
[17:16:28.49] This is Restored image by SSRD [SSRD.flg]...
[17:16:28.51] ---------------------------------------------------------------------
[17:16:29.40] Start MIR Tweaks...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:30.43] [MIR Tweaks] ...
[17:16:30.43] ---------------------------------------------------------------------
[17:16:31.44] Start Factory Update(s)...
[17:16:33.45] Start QFE Offline installation...
[17:16:38.13] PININST_OFF: PASSED...
[17:16:38.21] Type C:\System.sav\Logs\BBFindEr.log...
[17:16:38.23] Type C:\System.sav\Logs\BBFindE0.log...
---------- C:\SYSTEM.SAV\LOGS\PININST_OFF.LOG
Result=PASSED
[17:16:38.24] There was no QFE installation...
[17:16:38.24] Check FUList.log if there is duplicate Desc...
Couldn't access C:\System.sav\logs\FUList.log...
[17:16:38.35] No Duplicated Desc is found... PASSED.
[17:16:38.37] There was no Factory Update...

Hi @Savvy58
I did some further looking into that Error Log you posted. Basically, it means that is looking for a certain location that doesn't seem to be there. This could be a problem with the USB Recovery drive that you have. I would recommend that you contact HP. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How do I create a ROM image for emulation?

Can someone tell me how to create a ROM image from my dying LC III so I can emulate it on my newer mac? I still have a lot of files and software I need to access in the future. OS 9 doesn't work with some of the software on my G4 PowerMac and I will be switching to an intel mac mini soon and will lose even that capability.

You can find instructions on this page and the pages linked from it:
http://www.emaculation.com/doku.php/sheepshavermac_os_xsetup
Regards.

Netbook Mini 110-3830NR How do I create a restore image on a flash drive

Similar Messages

Maybe you are looking for