Netbook NB305 - Are the USB ports fully powered?

I'm wondering if the USB ports on the NB305 supply enough power to power an external 2.5" hard drive.
Thanks very much!

It can depend on the external drive. A friend of mine and I bought our WDC Passports at the same time from the same store and mine works just fine on every laptop we have tried it on and his exact same model (the serial numbers are only about 100 apart) has troubles powering up on some of the same laptops mine runs fine on. If it doesn't you can normally use a dual usb cable like this one to draw power from two ports to get it going.
http://www.xpcgear.com/usbtype2atob.html
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Similar Messages

What standards are the USB ports on a Dual 2.3 GHz PowerPC G5?

What standards are the USB ports on a Dual 2.3 GHz PowerPC G5? USB1 or USB2? If USB1, is there a card to equip the computer for USB2 or USB3?

USB 2.0. USB 3.0 is not yet supported in OS X. You can purchase USB 3.0 cards for Macs, but I don't know if they work in your slots. See www.caldigit.com, for example.
Message was edited by: Kappy

Where are the USB ports

Where are the USB ports
This question was solved.
View Solution.

Hi Moth!
I am only in my 69th year but I also find groping about behind PCs with the spiders a PITA!
So, buy a USB hub. I have several. One of the best is called "Masterplug" it clamps on the back of your desk and has 4 USB ports, a 13A power socket, RJ45, RJ11 and headphone jack on the front. Bad news is I can't find another one!
However, some kit won't work on hubs so buy some 1mtr USB extension leads, buy the best quality you can. Plug those in and bring them out to the front of the machine.
Dave (an inveterate tinkerer)

What are the usb ports for

Why does atv have usb ports does it suport an external hard drive?If not what are they on the unit for. Thanks

The USB port is for servicing and maintenance only.

Where are the USB ports on the Photosmart 7520 e-all-in-one series?

I'm trying to set up my printer, but don't have a CS?DVD drive so I'm using a USB cable. I cannot find the port for the small end of the cable. Any assistance will be greatly appreciated. Why don't HP just have Customer Service online to answer these questions?

On the back side, next to the power jack. #22 on this diagram
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/setupInstallDisplay/?sp4ts.oid=5...
there is a usb plug at the front, this is for usb memory stick.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

I have used all the usb ports on the back of my iMac desktop [2009] - in one I have a hub - too many?

The longer I have had my 2009 desktop iMac, the more I am needing usb ports. I only have 3 on the back. Currently 2 are used for the 2 printers I own and the other has a 3 branch hub in it for my mouse, keyboard and card reader. I have the mouse and keyboard attached this way as the cords work better for me in my workspace. I am using one of the ports on my keyboard for my mp3 player. Now I am branching out into the computer world and have tried using a flash drive. However when I tried plugging it into the other usb port on my keyboard, I get the message that there isn't enough power to support it. Same message when I tried one of the three ports in my hub. So the only way I could get my flashdrive to work was to unplug a printer, plug in the flash drive till I was done with it and then plug in the printer again. Since I am sure that this plugging and unplugging constantly would not be a good thing, I am now contemplating getting a better hub so I could permanently have a usb hub open for my flash drive. I figure I can always use a port on my keyboard for my card reader as I don't use that very often. My question is: "If I do get a better hub to put on my 3rd port on the back of the computer, will that be too much for the poor thing?"

Generally, you should use hubs (of which the keyboard is one) for devices which don't need to get their power from the USB port ("bus-powered"). Portable drives (including flash drives) are bus-powered; printers and other larger devices which have separate power cables are not. So the printers should attach to your hub, and small devices should connect directly to the Mac.
Now, some hubs are actually powered themselves, and these are better suited for powering small devices.
There are some good options here:
http://eshop.macsales.com/search/usb+hub
Are both your printers USB-only, or can they be networked (either wired or wirelessly)? That would save you some ports.
Matt

Where do I find the USB port interfaces?

Which of the elements in the /dev folder are the USB ports? Mine contains to many to post.

I'm sorry, maybe I didn't ask the correct question. I have a library that looks for the USB ports to do communication, Serialio and Java to be specific. I need to use the USB interfaces, which are usually found in /dev correct? And before anyone tells me to go to SerialIO's forums, I'm working on that as well. It seems that the library isn't finding the ports.

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working, help!

When my iPhone is connected (via the Lightning cable) to the usb port in my car, the alert tones are no longer played through the car speaker or the phone. This previously worked, but has randomly stopped working. help!

I took my iPhone to the Service center of M/s RSG INFOTECH PRIVATE LIMITED on April 17, 2014.
Why are you posting in this forum about what occured with an independent service provider? How is is at all relevant to Apple?? In fact, service by any person or business not authorized by Apple voids any waranty.

How do I determined if the USB ports are working?

How can I determine if the USB ports are working. Macbook Pro i7.
Thanks for any help. This is a new computer to me migrating from a PC system.

Blessings to those who are able to reply with possible answers. I am sorry....but I have spent days working on getting my two USB ports to work also. I basically use the USB ports for a wireless mouse and various flashdrives/memory sticks. I have a MacBook Pro 2011 Snow Leopard 10.6.8 I have tried software update, SMC and PRAM resets, battery reset, hardware test, creating a new user account....and browsing and reading numerous discussion boards.....awgh! I have stopped short of using my install DVD (fear of loosing data), upgrading to Lion or Mountain Lion (some fear of loosing an application that might not be compatible), contacting an Apple Store (AppleCare or whatever--live 2 hours away + fear of expense), and of course, trashing the laptop. Does anyone out there have any possible solutions? I see I am not alone. --A frustrated first-time Apple products owner.

Apple 23" Cinema Display - The USB Ports Are Not Working

The USB ports on my Cinema Display are not working. I do have both Tiger and Leopard installed on my Power Mac G5. Does this issue have to do with Leopard? If so, how can I fix this issue?

I would power down everything, disconnect the monitor from the computer, and the power from the computer and the monitor, wait 15 minutes, and reconnect the power. *Double check* your monitor connections, make sure the USB is properly inserted to the compters USB port. Might try a different port. If the USB ports of the computer work with known working devices (like a keyboard) and the problems continue, it looks like the monitor ports have a hardware problem.

Are both the USB ports the same? (MBP 15" 2.2 Ghz)

I am trying to use an external HDD (not powered) on the left USB port but the drive fails to load. A memory stick and mouse connect to this port work fine. The port on the right works just fine.
Is there a difference between the left and right USB ports?

Although both ports should be identical this is a problem others have reported (including myself.) Devices that require all the power the USB port is capable of providing may only work on the right side port. This may be especially the case with external drives. There is no fix for this except to only use the right side port for an external drive.

Which are the USB 2.0 ports and USB 3.0 ports?

Purchased a hp DV7-6143cl. Which are the USB 2.0 ports and USB 3.0 ports?
Thanks

USB 3.0 may be a different color.
Left side USB ports are 3.0
Right side are 2.0
See your Service guide (page 19)
Main page for your model

HT1379 The USB ports on my 30" Cinema are not working. The monitor has not been used for a year or so, and the computer is a Mac Book Pro, 1012 model running OS Mavericks. I need to move the computer between two locations, and the other monitor is a 27"

The USB ports on my 30" Cinema HD display appear to not work. The monitor has not been used for almost a year, when I upgraded to a new Mac Book Pro and the 27" retina display. Now I need to move the computer back and forth between two locations using the two displays. The need for operating USB ports is essential. Any ideas. The display appears entirely normal. Am running OS X 10.9.

Disregard, problem solved.

Can I connect an external hard drive to my Airport Express and share it to store files on between two machines via the usb port. The machines are a MacBook and a fairly new Win machine. Printers and Airplay as well as wifi work perfect.

Wondering about the above.

... I bought a hard drive at an Apple store because they told me I could hook it up through my Airport express.
Bzzt. Nope. Bring it back.
Read: http://support.apple.com/kb/HT2421
Question: What is an AirPort Express?
Answer: An AirPort Express is a Wi-Fi base station. Besides acting as an Internet access point, it has several specialized features which make it ideal for specific needs.
Printer - Act as a wireless interface for one printer connected to the USB port, making it available to your network
"Hook it up" - in the sense that a wireless device may be wirelessly "hooked up" to an Express - is a different matter; like "hooking up" with a friend.
Words mean things. Imprecise words mean imprecise things. That generally doesn't end well.
Apple ought to read this stuff once in a while.
John Galt wrote:
I thought you were asking about a USB hard disk attached to the Express. That won't work.
I thought right. That won't work. An Extreme or Time Capsule will.

How can I test the usb port on my Time Capsule to see if it is working?

Ever since lightening struck nearby (which took out our internet and copy machine) the printer I had connected to the usb port on my Time Capsule in my office has has failed to print through the TC. I can plug the printer directly into my MacBookAir and can print just fine. So there is nothing wrong with the printer nor the usb cable.
I've turned off and unplugged the printer with the usb cable connected & disconnected to the TC, no change. I've unplugged the TC, no change. I've opened the printer utility several times, and always get the "offline" error. I open the print queue, and it says the printer is not connected. I reinstalled the driver for the printer, still the same thing.
I'm starting to wonder if the usb port on my Time Capsule got fried. Any help anyone can give in trying to see if the usb port even functions anymore would be greatly appreciated.
My Time Capsule is model no. A1409.

Power is not likely to be killed .. it is the data components that are more fragile.
So you do have power which as you say is why the USB flashes.. but you don't have signal.
The only other thing you can do is use USB powered hub.. if you have one handy.. but I would not go out and buy one.
A damaged board is impossible (at cost less than replacement TC) to repair. And repairers do not like working on stuff damaged by lightning as components that did survive were stressed.. the transistor junctions become liable to fail at any time.. so you repair it and it just keeps coming back as not working. Sorry if you cannot use it without USB junk it and buy a replacement. A second hand Gen3 is about the best of them it seems.
You can also buy an ethernet to USB print server.. but a new ethernet or wireless network printer is probably near to the same price.
You can hunt ebay for second hand USB print servers.. or airport express, extreme or TC.. often you can find something suitable for just a few dollars if you shop well. Since you don't need the latest greatest to do this sort of job.. and people are disposing of things like USB print servers as soon as they buy network printers.

Netbook NB305 - Are the USB ports fully powered?

Similar Messages

Maybe you are looking for