Netboot clients boot into kernel panic
After upgrading my 10.4 server to 10.5 I created a new 10.5 boot image from a new MacBook. Clients (including the Macbook used to create the image) attempting to boot just go to a kernel panic. So, I created a new image from a 10.5.1 retail CD. Same results. both images created using image creation tool on the server.
Then I created another boot image on a new iMac with server tools installed (and updated). boot image was copied to server. Same result.
This is Apple Case #103074193. So far all data is flowing from me to them-nothing coming back.
If you have any insights into this I sure would appreciate hearing from you.
Thanks
Jim Pattison
I have an XServe G5 that was upgraded from 10.4.x to 10.5.4, and this alone did not fix the problem. I also had to stop the NFS file sharing service and restart it. The problem was hit-or-miss, but seemed to affect mostly my G5 iMacs, none of the Intel iMacs experienced a kernel panic when netbooting. I'm not sure why it wasn't affecting all of my netboot clients, probably only 25-30% of my G5 iMacs ever had a problem, but those that did were always a problem. Thanks for putting me on the right track with the original solution, I would have never guessed this to be a server-side issue.
Similar Messages
-
I purchased it in December and three days ago it kernel panicked twice. After the second event, it will not boot at all. The charge cord is green when it's plugged in and seems to indicate the battery is fine. When it went into kernel panic, the trackpad locked up. I had a technician open it up to see if there were any obvious issues and everything looked ok visually. I can't boot it into safe mode or anything involving powering the machine on, as it is not responding to anything. I have a major test coming up in five days that I am taking on this laptop and am desperate for answers. Any information you can offer at all would be helpful.
Try SMC and NVRAM resets:
http://support.apple.com/en-us/HT201295
http://support.apple.com/en-us/HT204063
Then try a safe boot again:
http://support.apple.com/en-us/HT201262
Ciao. -
Lion NetBoot and NetInstall causing kernel panic
I'm trying to get NetBoot and NetInstall working on a recently set up a new Mac Mini with OS X Lion Server.
We previously had Snow Leopard server and moved the existing images onto the Lion Server. However, when trying to boot off either image the machines kernel panic.
Have tried creating new images, but with the same result.
Anyone with similar issues who have managed to fix it?Thanks for your reply. I will try what you suggest and also read through the troubleshooting tips you linked to. Cheers!
I do have have some furher information about the problem.
Definitely some strange behaviour here - I'll try to explain is as well as I can.
Started out activating one NetInstall image of Lion 10.7.2 (did not have 10.7.3 on hand). When testing with my MacBook Pro (17-inch, Mid 2009) currently runing Lion (came with Snow Leopard), I got a kernel panic. However, when choosing the NetInstall image as startup disk via System Prefrences, it boots up fine via this image.
After a while I also added a Snow Leopard NetInstall image (newly created on one of our machines still running Snow Leopard). With the Lion set to be the default netboot image. When booting my machine into startup manager, then pressing 'N' to see netboot images, I only get one additional icon (despite there being two enabled images) with the server IP underneath. When selecting that icon, the machine boots up with the Snow Leopard installer (despite Lion being set as the default).
Trying the same with an iMac without a hard drive, this iMac would have come with Snow Leopard preinstalled, shows me both NetInstall images in startup manager, but I get a kernel panic when trying to boot off the Snow Leopard image - not the Lion image. Selecting the Lion image as startup disk while booted from the SL image results in a successful boot from the Lion image.
To recap:
On MacBook Pro
Startup manager, Lion boot = kernel panic
Startup manager, SL boot = success
Startup disk chooser, Lion boot = success
Startup disk chooser, SL boot = success
On iMac
Startup manager, Lion boot = success
Startup manager, SL boot = kernel panic
Startup disk chooser, Lion boot = success
Startup disk chooser, SL boot = success
The above is true when sharing the images both over NFS and HTTP. -
1st series iMac G5: Booting problems, kernel panics, waking from sleep...
Specifications of the iMac described: 1.8 Ghz, 1GB, 80GB, 64 Mb Nvidia VRAM, Airport, 10.5.5
Back in August 2004 my dad bought us kids an iMac G5 for ‘family use’. It had a fresh install of 10.3.5 on it and compared to the (1999) iMac G3 it replaced it was amazingly fast.
The iMac never showed any signs of probable issues, until we decided to upgrade to Leopard in January 2008. Initially, this upgrade was only meant to be able to sync with the latest iPod nano (who demanded a newer version of iTunes).
After the installation the first thing I noticed was a high CPU usage, the machine seemed slower than ever and that with 1 Gb of RAM (the minimum sys. req. for Leopard are 512 Mb of RAM). Anyway, then the real thing started, it wouldn’t turn on anymore. We brought it to an Authorized Apple Reseller, the Tech department said the Logic board had failed. The costs of the fix weren’t the worth the computer anymore, so...end of story. The iMac was indeed one of the bad series, although it hadn’t any swollen capacitors.
My dad already made up his mind and bought himself a Macbook. He then told me that if I was able to get the broken iMac fixed, I could keep it. And so, I bought an ‘as-is’ logic board on Ebay. Last weekend I installed it, and it actually seemed to work! Yet, the problems are during the startup: the first thing I see is a screen full with horizontal lines flickering all the time, like an old TV with bad signal. Mostly it won’t boot and I get the message to restart the computer (kernel panic, I got dozens of logs already!). Sometimes it got stuck during booting (grey apple screen with gear in the middle) making the fans go crazy (after a while) and sounding what others describe as a ‘jetliner taking off’ sound. Sometimes the screen remains black. Generally it takes me 5 to 10 minutes to start up properly. Maybe it’s just me but it seems like when the computer has warmed up a little (by turning on and off on and on) starting up gets smoother. I mean the startup screen suffers from less horizontal flickering lines.
During the use of Leopard, I again get high CPU usage, especially when I use multiple programs at the same time, or when starting multiple programs. My iStat Pro said once that the fans were running at 4700 rpm and the heat of the CPU was about 70 Celsius. If I really want to **** my iMac off I should play a racing game. That just totally freaks him out! These problems could probably be solved by adding more RAM. Right?
The iMac also has a sleep problem. Sometimes after lets say an hour or so, you can’t get it out of sleep mode (by manipulating keyboard and/or mouse, the sleep light stops, but the screen stays off --> only solution is to restart). What happened to me once was that it slept so long that it just got into a deep sleep by turning itself off completely!
Here’s a list of what I tried so far:
- Disk Utility: Resetting the permissions, no problems were found.
- Resetting the SMU, both on the logic board itself as by pressing the power button 5 - 8 seconds, no improvements.
- Resetting the PRAM, no improvements.
- Did the Hardware test of the original install CD, nothing was found, all good.
- Did Archive and Instal, this actually messed my system entirely, cause it wouldn't boot at all and when starting up from the Leopard installation DVD it wouldn't recognize the Macintosh HD.
- Did Archive and Instal with the original disks, this disk did recognize Macintosh HD and so I installed the original system, 10.3. Booting problems and those flickering lines are still there though.
Next phase will be erase and install, but first I want to know what you guys think about all this.
Oh eh, One more thing; The guys at Applecare (phone support) told me that the replaced logic board was also out of warranty and so they couldn’t help me. But as the man on the phone was kind, he told me to go look for a special ‘driver’ on the net. He said that the driver should be able to resolve some of the issues described. He said that I had to give in the name of the LB on google and look for results. Is this bogus? Because I haven’t found anything useful on google so far. What’s the name (rather than a number) of the LB in the first place?
I hope you guys can give me some answers. I'm kinda desperate. But I still feel there's hope...The symptoms of a flakey power supply are sleep problems and you have done all the right things as far as resetting the SMU and PRAM. Your CPU usage can be tracked by going to Utilities>Activity Monitor - look and see what is hogging the memory. The flickering lines could also be an optical system going south.
The other thing you can do is run DiskWarrior or TechToolPro to see if you have corrupted directories. Preferential Treatment will let you check for corrupted preferences. -
MacPro 1,1 10.6.8 won't boot after kernel panic
I apologize for the long post, but figured I'd lay out the whole scenario.
I had a kernel panic in Safari yesterday. Powered down. Powered on. Message appeared saying to power down, and restart again. Did that. Then the fun started. The restart was slower than normal, with each screen (gray, blue, Snow Leopard background screen) slow to come up and move to next. Finally, it stopped on the Snow Leopard screen but the login screen never appeared.
I have my fair share of kernel panics, sometimes triggered by something Virus Barrier is guarding against, sometimes for other reasons. I regularly save the reports but can't say off the top of my head that I know of something that could be implicated in this present issue.
Since this issue surfaced, I've tried multiple interventions to no avail. I used Disk Warrior to rebuild the directory and optimize the disk, both reported by the software as successful. The SMART status of the disk was normal. Verified and repaired permissions. As is typical, some were reported but nothing noticeably out of the ordinary. Still not able to reboot.
Used Apple's Disk Utility to check the status of the drive, and ran through the other available diagnostic tests. Still not able to reboot.
Among different attempts to restart, sometimes it stopped at blue screen, sometimes at Snow Leopard default background screen image.
Reset PRAM. Still no reboot. Booted into Single user mode/verbose mode. Then fsck -fy. The second time I ran the latter, it reported "FILE SYSTEM WAS MODIFIED" and I ran fsck -fy once more.
The report on screen in Single User mode showed some things I don't know how to interpret. Lines of the report beginning with "AppleACPICPU: Processor Id= " were as follows:
AppleACPICPU: Processor Id=0 LocalApicId=0
AppleACPICPU: Processor Id=0 LocalApicId=1
AppleACPICPU: Processor Id=0 LocalApicId=7
AppleACPICPU: Processor Id=0 LocalApicId=6
AppleACPICPU: Processor Id=0 LocalApicId=0
AppleACPICPU: Processor Id=0 LocalApicId=0
AppleACPICPU: Processor Id=0 LocalApicId=0
AppleACPICPU: Processor Id=0 LocalApicId=0
Other things from the report:
• Mac Framework successfully initialized using 16384 buffer headers and 4096 cluster IO buffer headers
• BSD root: disk1s2, major 14, minor 5
• jnl: unknown-dev
• com.apple.launched 1 com.apple.launched1 *** launched[1] has started up. ***
Do things in this list look normal? Any red flags?
As it stands now, none of the measures have enabled the computer to reboot. When I power on it goes straight to the default Snow Leopard screen. Oddly, if I power it off but then later go back and hit the space bar, such as one would do when the computer has been idle and the computer or screen has gone to sleep, the computer instantly powers itself on. Likewise, trying to power on and hold down the "c" key to attempt to boot from the system CD to Disk Utility does the same thing. That's really odd. Powering on via any key on keyboard is not expected behavior!
So ... what I most want to determine is:
• Were Disk Warrior and Disk Utility mistaken in reporting that the hard drive is functioning normally? Was it actually failing?
• Did the fsck -fy routine, with the reported action "FILE SYSTEM WAS MODIFIED," hasten it to its death?
• Is it more likely that the processor or some other major hardware issue is involved?
The computer is old, and has been more fitful over the past 6 months or so, but I've also had more issues with Virus Barrier forcing kernel panics during that same time, so it's been hard to say whether it was the computer that was acting wonky or Virus Barrier causing the wonkiness.
I just need to know whether I should wipe and reformat the existing WD disk, go buy a new disk to format, or give up on the computer and order a new MacPro model to replace it. If the latter was undertaken, I would really prefer to get the old MacPro functioning long enough to have use of it while I can complete an order and get something new set up. I have some tasks that I need to be getting done and data that I need to access to take of other tasks. I have a current Time Machine back up. But now that I can't even boot from Disk Utility, it seems I will have to buy another drive to do the interim solution.
I would very, very appreciative of any expert advice.
DebbieHi hatter,
Good to talk with you again about my Mac Pro 1,1. Can't believe I still have this stalwart machine, but it just keeps on keepin' on.
I have a Mac Box Set with Snow Leopard. That's the disk I was using Disk Utility from. I did the hardware tests that I saw among the tools available when one boots from the disk. Could be I'm missing something.
While I was waiting for a reply from someone at Discussions, I went looking at Walmart for an SATA disk. They were completely out of them due to local storms that fried a lot of people's computers and hardware. It's a small town. Not a lot of options. So I came back home and thought I'd try again to boot from the Apple DVD. That time it worked. I was going to do a restore from the Time Machine backup, but then decided to just reinstall the OS from the DVD and see what happened. Clean seemed better than dirty, you know?
At any rate, I installed the OS - to the same WD Caviar Black hard disk. When it restarted, everything came up looking back to normal, except that I need to update to 10.6.8 and reinstall iWork apps and other Apple add-ons as needed. Oh what a relief it is!
I would like to do some hardware testing though. If you can advise, I would appreciate it. -
MacBook Pro (Boot Camp) kernel panics, application crashes
I'm currently using a mid-2012 15-inch MacBook Pro with Windows 7 Home Premium installed via Boot Camp. Most of my daily activities before last week were playing games on Steam (for both Mac and Windows), editing videos in iMovie (Mac), and browsing the internet on Google Chrome (both). However, starting last Thursday, September 20th, at random intervals, my programs kept crashing without any sort of heads-up or computer slowdown leading into them. This was occurring on Mac with Safari, Steam and iMovie, and on Windows with the newly installed Borderlands 2, Steam, and Skype. Not to mention, Google Chrome's Shockwave was crashing every 15 minutes or less, and the "Oh Snap!" error page popped up without me doing anything on the pages that crashed (both on Mac and Windows).
To add to the problem, I was given my first blue screen after a string of application crashes last Thursday, and soon after upon switching to Mac, I received a kernel panic. From what my friends and I have researched, this has happened due to memory corruption, seeing as how the blue screen errors all had codes relating to that, like 0x0000003B and 0xc0000005. However, no matter what I've tried to fix this, be it cleaning the Windows Registry, using MemTest to see if the RAM caused this, running Disk Utility on Mac, running the Apple Hardware Test, or uninstalling/removing potential malware, nothing has seemed to work. Borderlands 2 keeps crashing at random intervals, Safari still quits while a YouTube video is still playing, and most annoyingly, I get kernel panics and blue screens while I'm talking to my friends on Skype.
Another interesting problem is that I can't install a Mac OS X 10.7.5 update; it tells me the downloaded file was corrupted every time I try download it and it can't install as a result. I'm stuck on Mac OS X 10.7.4. Yet I'm able to install Windows updates without any problem whatsoever. Why is this?
My question is, is it best to take this in for repair, or is there something else I can do to fix this that I haven't tried yet? I don't consider myself to be any good with the computers I use, so I have no idea if I should have seen/identified the error already.hi,
panic.log says this:
Tue Jun 13 10:39:25 2006
panic(cpu 1 caller 0x0019CAEF): Unresolved kernel trap (CPU 1, Type 14=page fault), registers:
CR0: 0x8001003b, CR2: 0x88e9835e, CR3: 0x00d50000, CR4: 0x000006a0
EAX: 0x87e9835e, EBX: 0xffffffff, ECX: 0xfffffec0, EDX: 0x00000056
ESP: 0x88e9835e, EBP: 0x13b3bf44, ESI: 0x00d650f4, EDI: 0x00000056
EFL: 0x00010086, EIP: 0x0019dd40, CS: 0x00000008, DS: 0x6de30010
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x13b3bd94 : 0x128b5e (0x3bbeb8 0x13b3bdb8 0x131bbc 0x0)
0x13b3bdd4 : 0x19caef (0x3c1340 0x1 0xe 0x3c10f8)
0x13b3be84 : 0x197b53 (0x13b3be98 0x13b3bf44 0x19dd40 0x23de0048)
0x13b3be90 : 0x19dd40 (0x23de0048 0x130010 0x10 0x6de30010)
0x13b3bf44 : 0x199021 (0x0 0x0 0x6de8e24e 0x216)
0x13b3bf64 : 0x135d78 (0x0 0x0 0x0 0x0)
0x13b3bfd4 : 0x197a21 (0x0 0xffffffff 0x23a8278 0xffffffff) Backtrace terminated-invalid frame pointer 0x0
Kernel version:
Darwin Kernel Version 8.6.1: Tue Mar 7 16:55:45 PST 2006; root:xnu-792.9.22.obj~1/RELEASE_I386
sorry, i am not really able to read and understand this. the panics dont seem to relate to airport. i am using airport the whole day and the first 8 days with my MBP were error-free, except the whine. -
MacBook Pro Won't Boot. Kernel Panic. Only Windows Partition Works
So one day I was using my mac when it froze for no apparent reason, i was just running iTunes, so i held the power key and it shut down. After a while, i turned it back on and it got to the apple but then i got a bunch of errors i guess, around the lines of kernel panic. So i went online and read other peoples problems but none of them seamed to work. It wont start up normally, not in safe mode, recovery drive wont boot, only the windows partition works. i reset my PRAM i think its called and that failed. someone online said to re-install lion. i dont have a lion recovery usb thingy, but i have a lion disk, but my disk drive no longer works due to hardware damage. so i need to back up my files from my mac partition and re-install lion OR just get rid of the Kernel Panic Thingy.
ps. everytime i try to boot mac, i get a different error message.
any help is greatly appreciatedAre you willing to lose the data that isn't backed up? If not, you have to try to back up now, before you do anything else.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot into Recovery (command-R at startup; 10.7 or later), from a local Time Machine backup volume (option key at startup; 10.7.2 or later), or from your installation disc (C key at startup; 10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
I have a new issue with all DPs.
When I pxe boot, it will boot into WinPE but then it will fail and reboot after the step: “Preparing network connections”
I have tried reinstalling the DP and MP. Also redistributing the boot image.
When I press F8 to go into debug mode, ipconfig show me an IP address and I am able to ping my Management point, my DHCP server and also my Distribution point.
I have attached the smsts.log file.
<![LOG[LOGGING: Finalize process ID set to 900]LOG]!><time="10:43:28.925+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="tslogging.cpp:1495">
<![LOG[==============================[ TSBootShell.exe ]==============================]LOG]!><time="10:43:28.925+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904"
file="bootshell.cpp:1055">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="10:43:28.925+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="util.cpp:964">
<![LOG[Debug shell is enabled]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:1066">
<![LOG[Waiting for PNP initialization...]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:60">
<![LOG[RAM Disk Boot Path: NET(0)\SMSIMAGES\EVN0002F\BOOT.EVN0002F.WIM]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="configpath.cpp:302">
<![LOG[Booted from network (PXE)]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="configpath.cpp:317">
<![LOG[Network(PXE) path: X:\sms\data\]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="configpath.cpp:319">
<![LOG[Found config path X:\sms\data\]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:548">
<![LOG[Booting from removable media, not restoring bootloaders on hard drive]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:582">
<![LOG[X:\sms\data\WinPE does not exist.]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:599">
<![LOG[X:\_SmsTsWinPE\WinPE does not exist.]LOG]!><time="10:43:28.940+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:613">
<![LOG[Executing command line: wpeinit.exe -winpe]LOG]!><time="10:43:28.956+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:44:13.294+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:942">
<![LOG[Starting DNS client service.]LOG]!><time="10:44:13.294+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:666">
<![LOG[Executing command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="10:44:13.809+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908"
file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:44:13.809+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:942">
<![LOG[==============================[ TSMBootStrap.exe ]==============================]LOG]!><time="10:44:13.903+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116"
file="tsmbootstrap.cpp:1165">
<![LOG[Command line: X:\sms\bin\x64\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="10:44:13.903+480" date="08-13-2014" component="TSMBootstrap" context="" type="0" thread="1116"
file="tsmbootstrap.cpp:1166">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="10:44:13.919+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="util.cpp:964">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\TSRESNLC.DLL']LOG]!><time="10:44:13.919+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="resourceutils.cpp:169">
<![LOG[Current OS version is 6.2.9200.0]LOG]!><time="10:44:13.919+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="util.cpp:3094">
<![LOG[Adding SMS bin folder "X:\sms\bin\x64" to the system environment PATH]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="0" thread="1116"
file="tsmbootstrap.cpp:963">
<![LOG[PXE Boot with Root = X:\]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="tsmbootstrap.cpp:1062">
<![LOG[Executing from PXE in WinPE]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="1" thread="1116" file="tsmbootstrap.cpp:1077">
<![LOG[Loading TsPxe.dll from X:\sms\bin\x64\TsPxe.dll]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSMBootstrap" context="" type="0" thread="1116" file="tsmbootstraputil.cpp:1363">
<![LOG[TsPxe.dll loaded]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsmbootstraputil.cpp:1373">
<![LOG[Device has PXE booted]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tspxe.cpp:122">
<![LOG[Variable Path: \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116"
file="tspxe.cpp:134">
<![LOG[Variable Key Len: 69]LOG]!><time="10:44:13.934+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tspxe.cpp:141">
<![LOG[Succesfully added firewall rule for Tftp]LOG]!><time="10:44:13.950+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="fwopen.cpp:123">
<![LOG[Executing: X:\sms\bin\x64\smstftp.exe -i 10.9.12.122 get \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var X:\sms\data\variables.dat]LOG]!><time="10:44:13.950+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="10:44:14.028+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\x64\smstftp.exe" -i 10.9.12.122 get \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var X:\sms\data\variables.dat]LOG]!><time="10:44:14.028+480" date="08-13-2014"
component="TSPxe" context="" type="0" thread="1116" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\x64\smstftp.exe" -i 10.9.12.122 get \SMSTemp\2014.08.13.10.42.54.0001.{F722E5C6-13E4-4635-B674-7A56A68BCF03}.boot.var X:\sms\data\variables.dat]LOG]!><time="10:44:14.028+480" date="08-13-2014"
component="TSPxe" context="" type="1" thread="1116" file="commandline.cpp:827">
<![LOG[Process completed with exit code 0]LOG]!><time="10:44:14.106+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="commandline.cpp:1123">
<![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="fwopen.cpp:146">
<![LOG[Successfully downloaded pxe variable file.]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tspxe.cpp:187">
<![LOG[we are booted using PXE]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:2673">
<![LOG[we are booted using PXE and we use a generated password]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:2678">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[CryptDecrypt (hKey, 0, 1, 0, pData, &dwDecryptedLen), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,165)]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="windes.cpp:165">
<![LOG[SMS::Crypto::DES::DecryptBuffer( (BYTE*)pszPassword, (DWORD)(wcslen(pszPassword)*sizeof(WCHAR)), encryptedBuffer.getBuffer(), (DWORD)encryptedBuffer.size(), pbDecryptedBuffer, dwDecryptedBufferSize ), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\tscore\tsremovablemedia.cpp,387)]LOG]!><time="10:44:14.122+480"
date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsremovablemedia.cpp:387">
<![LOG[Verifying media password.]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:271">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.122+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[Found network adapter "Intel(R) 82577LM Gigabit Network Connection" with IP Address 10.9.2.50.]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="0"
thread="1116" file="tsmbootstraputil.cpp:517">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[CryptDecrypt (hKey, 0, 1, 0, pData, &dwDecryptedLen), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\smscrypt\windes.cpp,165)]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="windes.cpp:165">
<![LOG[SMS::Crypto::DES::DecryptBuffer( (BYTE*)pszPassword, (DWORD)(wcslen(pszPassword)*sizeof(WCHAR)), encryptedBuffer.getBuffer(), (DWORD)encryptedBuffer.size(), pbDecryptedBuffer, dwDecryptedBufferSize ), HRESULT=80090005 (e:\nts_sccm_release\sms\framework\tscore\tsremovablemedia.cpp,387)]LOG]!><time="10:44:14.153+480"
date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsremovablemedia.cpp:387">
<![LOG[Entering TSMediaWizardControl::GetPolicy.]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsmediawizardcontrol.cpp:527">
<![LOG[Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00350031004100300031003600420036002D0046003000440045002D0034003700350032002D0042003900370043002D003500340045003600460033003800360041003900310032007D00']LOG]!><time="10:44:14.153+480"
date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="environmentscope.cpp:263">
<![LOG[Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116"
file="environmentscope.cpp:623">
<![LOG[Creating key 'Software\Microsoft\SMS\47006C006F00620061006C005C007B00420041003300410033003900300030002D0043004100360044002D0034006100630031002D0038004300320038002D003500300037003300410046004300320032004200300033007D00']LOG]!><time="10:44:14.153+480"
date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="environmentscope.cpp:263">
<![LOG[Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116"
file="environmentscope.cpp:623">
<![LOG[Setting LogMaxSize to 1000000]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:555">
<![LOG[Setting LogMaxHistory to 1]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:556">
<![LOG[Setting LogLevel to 0]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:557">
<![LOG[Setting LogEnabled to 1]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:558">
<![LOG[Setting LogDebug to 1]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:559">
<![LOG[UEFI: false]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:569">
<![LOG[Loading variables from the Task Sequencing Removable Media.]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:584">
<![LOG[Loading Media Variables from "X:\sms\data\variables.dat"]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsremovablemedia.cpp:322">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\x64\1033\TSRES.DLL']LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="util.cpp:964">
<![LOG[Setting SMSTSMP TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSMediaGuid TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSBootMediaPackageID TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSHTTPPort TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSHTTPSPort TS environment variable]LOG]!><time="10:44:14.153+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSIISSSLState TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSLaunchMode TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSMediaPFX TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSPublicRootKey TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSSiteCode TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSSiteSigningCertificate TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSUseFirstCert TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSx64UnknownMachineGUID TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Setting _SMSTSx86UnknownMachineGUID TS environment variable]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:604">
<![LOG[Root CA Public Certs=]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:615">
<![LOG[Missing root CA environment variable from variables file]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:621">
<![LOG[Support Unknown Machines: 0]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:632">
<![LOG[Custom hook from X:\\TSConfig.INI is ]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:675">
<![LOG[No hook is found to be executed before downloading policy]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:699">
<![LOG[Authenticator from the environment is empty.]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:838">
<![LOG[Need to create Authenticator Info using PFX]LOG]!><time="10:44:14.169+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmediawizardcontrol.cpp:850">
<![LOG[Initialized CStringStream object with string: 6b7b5b1a-8a29-40a1-af6b-008746965168;2014-08-13T18:44:14Z.]LOG]!><time="10:44:14.200+480" date="08-13-2014" component="TSPxe" context="" type="0"
thread="1116" file="stringstream.cpp:101">
<![LOG[Set media certificate in transport]LOG]!><time="10:44:14.216+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="libsmsmessaging.cpp:9401">
<![LOG[Set authenticator in transport]LOG]!><time="10:44:14.216+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="libsmsmessaging.cpp:7734">
<![LOG[CLibSMSMessageWinHttpTransport::Send: URL: SS01.adskevents.local:80 GET /SMS_MP/.sms_aut?MPKEYINFORMATIONMEDIA]LOG]!><time="10:44:14.216+480" date="08-13-2014" component="TSPxe" context="" type="1"
thread="1116" file="libsmsmessaging.cpp:8604">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="10:44:15.939+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="10:44:15.939+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:942">
<![LOG[Successfully launched command shell.]LOG]!><time="10:44:15.939+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="904" file="bootshell.cpp:432">
<![LOG[Error. Received 0x80072ee2 from WinHttpSendRequest.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="libsmsmessaging.cpp:8870">
<![LOG[hr, HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,8919)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116"
file="libsmsmessaging.cpp:8919">
<![LOG[sending with winhttp failed; 80072ee2]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="3" thread="1116" file="libsmsmessaging.cpp:8919">
<![LOG[m_pHttpTransport->Send (0, 0, pServerReply, nReplySize), HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,5159)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="libsmsmessaging.cpp:5159">
<![LOG[MPKeyInformation.RequestMPKeyInformationForMedia(szTrustedRootKey), HRESULT=80072ee2 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,9410)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="libsmsmessaging.cpp:9410">
<![LOG[Failed to get information for MP: http://SS01.adskevents.local. 80072ee2.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="3" thread="1116" file="tsmbootstraputil.cpp:1518">
<![LOG[sMP.length() > 0, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1526)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmbootstraputil.cpp:1526">
<![LOG[TSMBootstrapUtil::SelectMP ( sSMSTSMP.c_str(), sMediaPfx.c_str(), sMediaGuid.c_str(), sAuthenticator.c_str(), sEnterpriseCert.c_str(), sServerCerts.c_str(), nHttpPort, nHttpsPort, bUseCRL, sSiteCode, sAssignedSiteCode, sMP, sCertificates, sX86UnknownMachineGUID,
sX64UnknownMachineGUID), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,907)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmediawizardcontrol.cpp:907">
<![LOG[Exiting TSMediaWizardControl::GetPolicy.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="0" thread="1116" file="tsmediawizardcontrol.cpp:1419">
<![LOG[GetPolicy(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2492)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmediawizardcontrol.cpp:2492">
<![LOG[RunWizardForPXE(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,2834)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context=""
type="0" thread="1116" file="tsmediawizardcontrol.cpp:2834">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe"
context="" type="0" thread="1116" file="tsmbootstrap.cpp:1078">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1226)]LOG]!><time="10:44:35.281+480" date="08-13-2014"
component="TSPxe" context="" type="0" thread="1116" file="tsmbootstrap.cpp:1226">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSPxe" context="" type="1" thread="1116" file="tsmbootstrap.cpp:1238">
<![LOG[Execution complete.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:693">
<![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="0"
thread="908" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="0"
thread="908" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="0"
thread="908" file="environmentlib.cpp:553">
<![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell"
context="" type="0" thread="908" file="utils.cpp:809">
<![LOG[RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="2" thread="908"
file="utils.cpp:809">
<![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="2" thread="908" file="utils.cpp:842">
<![LOG[End program: ]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="bootshell.cpp:725">
<![LOG[Finalizing logging from process 900]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="10:44:35.281+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="tslogging.cpp:1583">
<![LOG[Successfully finalized logs to C:\SMSTSLog]LOG]!><time="10:44:35.687+480" date="08-13-2014" component="TSBootShell" context="" type="1" thread="908" file="tslogging.cpp:1640">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="10:44:35.687+480" date="08-13-2014" component="TSBootShell" context="" type="0" thread="908" file="tslogging.cpp:584">Every time a query is sent to the MP, it receives 0x80072ee2 which translates to "The operation timed out". This has nothing to do with your MP or DP though so reinstalling them won't make any difference.
This error is indicative of network issues -- basically, the "client" is not getting a response back in a timely manner (and probably not at all). Assuming the MP is healthy though, then only other piece of the puzzle is the network.
You can try setting the SMSTSAssignmentsDownloadRetry and SMSTSAssignmentsDownloadInterval task sequence variables in the boot image to increase the client's tolerance for latency or other weirdness in the network. This has worked for many.
If that doesn't work, you'll have to break out a sniffer and watch the traffic to see what's going on at a network level.
Jason | http://blog.configmgrftw.com -
Macbook kernel panic during boot + other kernel panics! HELP PLEASE
Hello,
I have a w macbook 2,0 ghz duo (2006 edition), 2gb ram, original HD. Operating system: Tiger OsX (updated).
A couple of weeks ago my mb started to display (during a normal session and even after a stand-by) a big message on screen "Please hold down the power button to restart your computer" etc = kernel panic message.
I took a look at the panic.log file and it said:
BSD process name corresponding to current thread: firefox-bin
So I thought there was something with firefox and, to resolve definetely this problems, I checked my hd using utility then I tried to install Leopard using the DVD(updated again). After installing Leopard I did not receive kernel panic errors related to firefox-bin thread but now I still have kernel panic problems.
These are the error messages:
1. When I boot up the mb, it shows the "restart" message or it FREEZES (doesn't boot up)
2. The log says that the panic error is related to "ACPI" and Io.apple.firewirefamily (what is it???)
3. The panic.log file just says:
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x001a77f5, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000000, CR3: 0x01054000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x0053f0c0, ECX: 0x03db8c34, EDX: 0x284cc000
CR2: 0x00000000, EBP: 0x284cfeb8, ESI: 0x03db8000, EDI: 0x03db8000
EFL: 0x00010087, EIP: 0x001a77f5, CS: 0x00000004, DS: 0x284c000c
Error code: 0x00000002
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x284cfcc8 : 0x12b4f3 (0x45b13c 0x284cfcfc 0x1335e4 0x0)
0x284cfd18 : 0x1a9c68 (0x464700 0x1a77f5 0xe 0x423eb0)
0x284cfdf8 : 0x1a038d (0x284cfe18 0x1a 0xbd9100 0xbdaaa4)
0x284cfe10 : 0x1a77f5 (0xe 0x3d90048 0xc 0x284c000c)
0x284cfeb8 : 0x13698e (0x3db8000 0x3db8b58 0x3db8c34 0x19eb5b)
0x284cff18 : 0x136dd3 (0x3db801c 0x3db801c 0x284cff78 0x1415cd)
0x284cff58 : 0x136e61 (0x13eddf 0x0 0x0 0x1a336f)
0x284cff78 : 0x13efa4 (0x13eddf 0x0 0x0 0x0)
0x284cffc8 : 0x1a017c (0x0 0x0 0x1a30b5 0x4b11e40)
Backtrace terminated-invalid frame pointer 0
*BSD process name corresponding to current thread: kernel_task*
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook1,1 (Mac-F4208CC8)
Now it is difficult just to enter mac osx because I'm experiencing MANY kernel panics!!
Anyone know how to fix these problems?
Thank you very much
Riccardommm... still having firefox-bin panic errors...
Here's other logs that I found searching "panic.log" files in my hd:
Wed Feb 11 00:55:32 2009
panic(cpu 0 caller 0x001A9C68): Kernel trap at 0x007ff825, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000e90, CR3: 0x01054000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x007ff825, ECX: 0x00000007, EDX: 0x00000003
CR2: 0x00000e90, EBP: 0x3e667d88, ESI: 0x03f11e80, EDI: 0x00000014
EFL: 0x00010202, EIP: 0x007ff825, CS: 0x00000008, DS: 0x3e66000c
Error code: 0x00000000
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x3e667bb8 : 0x12b4f3 (0x45b13c 0x3e667bec 0x1335e4 0x0)
0x3e667c08 : 0x1a9c68 (0x464700 0x7ff825 0xe 0x463eb0)
0x3e667ce8 : 0x1a038d (0x3e667d08 0x4303de0 0x3d02e68 0x3ef098)
0x3e667d00 : 0x7ff825 (0xe 0x3e0048 0x430000c 0x53000c)
0x3e667d88 : 0x802aa3 (0x3d02000 0x11 0x4304640 0x0)
0x3e667da8 : 0x8e0d9a (0x3d02000 0x4304640 0x1 0x0)
0x3e667dc8 : 0x8e116e (0x43ef800 0x4306480 0x8e0c90 0x43ef800)
0x3e667e48 : 0x412976 (0x43ef800 0x3f02600 0x1 0x3ecd96)
0x3e667ea8 : 0x414219 (0x3f02600 0x43ef800 0x43d6b40 0x43ce1c0)
0x3e667f28 : 0x413a7d (0x3f02600 0x42e1a40 0x0 0x3f1bef)
0x3e667f78 : 0x415111 (0x3f02600 0x8 0x3e667fac 0x1)
0x3e667fc8 : 0x1a017c (0x43c4390 0x0 0x1a30b5 0x3dbb128)
Backtrace terminated-invalid frame pointer 0
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.6)@0x8de000->0x8e6fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.6)@0x7fa000
dependency: com.apple.iokit.IONetworkingFamily(1.6.1)@0x5d6000
com.apple.iokit.IOFireWireFamily(3.4.6)@0x7fa000->0x838fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook1,1 (Mac-F4208CC8)
2. Tue Feb 10 16:03:36 2009
panic(cpu 0 caller 0x003ECE52): "A driver releasing a(n) OSArray has corrupted the registry\n"@/SourceCache/xnu/xnu-1228.9.59/libkern/c++/OSObject.cpp:241
Backtrace (CPU 0), Frame : Return Address (4 potential args on stack)
0x34397b78 : 0x12b4f3 (0x45b13c 0x34397bac 0x1335e4 0x0)
0x34397bc8 : 0x3ece52 (0x49c7dc 0x49c8a4 0x3cf64c4 0x3f48e3)
0x34397c08 : 0x3ecdc2 (0x3cf64c0 0x0 0x1 0x3d04f00)
0x34397c28 : 0x3ece8f (0x3cf64c0 0x0 0x40fe504 0x41a5300)
0x34397c48 : 0x3eeaeb (0x3cf64c0 0x416fa50 0x34397c78 0x41a5300)
0x34397c68 : 0x3ecdc2 (0x40fe500 0x0 0x1 0x3eec3b)
0x34397c88 : 0x3ece8f (0x40fe500 0x0 0x34397cc8 0x0)
0x34397ca8 : 0x40bc93 (0x40fe500 0xc 0x0 0x1a5300)
0x34397cc8 : 0x40be65 (0x41a5300 0x43bde00 0x0 0x41a5300)
0x34397ce8 : 0x4101a4 (0x41a5300 0x41a7780 0x0 0x3cc601c)
0x34397d38 : 0x410357 (0x41a7780 0x4 0x0 0xe00002c2)
0x34397d58 : 0x43bafe (0x41a7780 0x5370c0 0xa03e1000 0x0)
0x34397d78 : 0x189873 (0x3c77460 0x4080570 0x34397dac 0x11dd27)
0x34397db8 : 0x12d506 (0x4080548 0x3d8f49c 0x0 0x0)
0x34397df8 : 0x126609 (0x4080500 0x0 0x7c 0x34397ee4)
0x34397f08 : 0x198153 (0x34397f44 0x0 0x0 0x0)
Backtrace continues...
BSD process name corresponding to current thread: scsid
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook1,1 (Mac-F4208CC8)
3. Thu Jan 29 12:03:07 2009
panic(cpu 1 caller 0x001A9C68): Kernel trap at 0x0013ed59, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x00000018, CR3: 0x01054000, CR4: 0x000006e0
EAX: 0x00000000, EBX: 0x25ecda1d, ECX: 0x04e435d0, EDX: 0x00522b20
CR2: 0x00000018, EBP: 0x34387ec8, ESI: 0x2bcb9a97, EDI: 0x04e95d08
EFL: 0x00010083, EIP: 0x0013ed59, CS: 0x00000004, DS: 0x3438000c
Error code: 0x00000000
Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
0x34387cf8 : 0x12b4f3 (0x45b13c 0x34387d2c 0x1335e4 0x0)
0x34387d48 : 0x1a9c68 (0x464700 0x13ed59 0xe 0x463eb0)
0x34387e28 : 0x1a038d (0x34387e48 0x2e502020 0x34387e78 0x1404af)
0x34387e40 : 0x13ed59 (0xe 0x459f0048 0xc 0xc)
0x34387ec8 : 0x132810 (0x4e95d08 0x25ecda1d 0x2bcb9a97 0x34387eec)
0x34387f08 : 0x198153 (0x34387f44 0x0 0x0 0x0)
0x34387fc8 : 0x1a0977 (0x46c20e0 0x0 0x1a30b5 0x3cd026c)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbfffe6f8
BSD process name corresponding to current thread: firefox-bin
Mac OS version:
9G55
Kernel version:
Darwin Kernel Version 9.6.0: Mon Nov 24 17:37:00 PST 2008; root:xnu-1228.9.59~1/RELEASE_I386
System model name: MacBook1,1 (Mac-F4208CC8)
thanks -
Mbp goes into kernel panic after install of 10.6.3!!!!
Hi i just took in my mbp to the apple store and they replaced both the hard drive and optical drive, and they installed 10.6.3, but now when i go to turn it on, it takes me to my desktop and then says you need to restart it. i have tried to boot from the 10.5 disc and 10.6.6 disc and it doesnt work. any thoughts? this is really frustrating.
EDIT: it even goes into kernel when im in safe boot. also now when i try to boot, it doesnt get past the white/grey screen before it says i need to restart.
Message was edited by: JvgreenblattContinue the restore and then report back. BTW if you not satisfied with the level of service you have received then contact Apple Customer service. If you are in the US then you can reach them at 800-767-2275, if you are outside the US use AppleCare Contact Info and once connected ask to speak to Customer Service.
-
Booting to Kernel Panic cannt boot from a cd/dvd. HELP!
Hello everyone.
My computer boot to the Kernel error. I can’t boot from the installation CD\DVD or from a firewire HD. but I can boot from a different computer using my laptop HD when pressing T while booting.
I can boot to open firmware, I tried to reset the nvram, it worked once but not anymore.
I went to apple store and they told me that the logic board need to be replaced, I still think it’s a software problem.
Please help,
Ophir
PowerBook G4 17" Mac OS X (10.4.4)hi there
ive bought a 17" powerbook 1GIG, 512(UPDATED TO 512 X 2), 60 , SUPERDRIVE model.its a 2003 model but came with no original disks, and installed with OS TIGER.I wanted to install OS classic, so like an idiot - i removed applications from the hard drive and the blue network symbol.the hard drive icon then vanished and i could not open applications.So i re-started the machine, it now comes on with the welcome tune ,then you see the grey apple logo,then from top to bottom a dark grey covers the screen with the instructions in the middle to"restart computer".there is half a screen of programme text and at the top it reads "unable to find driver for this platform"
also it states "panic at the bottom.
Will i be able to sort this problem if i had the original disks so i can reinstall everything.ive tried to install copies of classic and jaguar-no luck.
can you give me directions into ways of re-booting/safe mode/target mode.or is all of this a waiste of time if i don not have the orighinal disks that came with my powerbook.do you know anywhere where i can get a copy from.
do you know of a company that can sell me the original disks or copies.Please help as i desperately need to use my computer been a graphic designer.
hope you can help.
thankyou,jason -
I will start from the beginning. Last night i was Win XP in VPC on my iMac G5 Rev B. and got a 0x700 error saying their was a PPC fault that occured and windows got currupted and blue screened. I couldn't use windows anymore and VPC also force quited and i got an error saying send error report to MS. So i just closed it out and re-opened and same thing occured so i just restarted my machine figuring it was just a glitch and ever since then in boots to the apple logo and as soon as the dahes start to spin it kernal panics and stops dead in it tracks. I tried restarting a couple of times and same thing occurs. Now i have a wireless keyboard so i can't zap the pram or anything like that. is their anything else i can do to correct this because i have no way to boot from CD or anything like that to run a repair or even re-install mac os x. any help is appreciated thanx.
well i talked to apple chat and they said try resetting the smu and pram and i actually got both to work but when the computer re booted it came back up to the apple loading screen and panicked and then a bunch of text came all over the screen sating unable to find driver for this platform "powermac 8,2"). also it was trying to load something and try and debug it and failed and there was a bunch of hexadecimal code all over the screen and it said something about darwin kernal version 3.8.0 mon oct 3 20:04:04 PT PDT 2005 root: xnu-792.6.22.obj~2/release PPC
panic: we are hanging here -
Hi all,
I have problem with Boot camp. When Boot Camp *start partitioning disk*, *Karnel Panic appears*. I rapaired disk from Install DVD, but after that *same issue happend*.
I have 120GB HDD, 32GB free and want 15GB for WinXP.
Have anybody same problem? Have solution?
Thanks a lot.Backup. Reformat. Restore.
If you don't have a bootable external drive, might want to have a small partition to boot from, and 2nd partition for your backup. Otherwise use Leopard DVD -> Utilities and Disk Utility (Restore). Make sure it is bootable and works, then restore back.
SuperDuper and Carbon Copy Cloner make great backup and bootable clones, too. -
Strange pink squares while booting and then kernel panic
Hello everybody.
This is my boot screen. It began 2 days ago when I tried to update Mac OS to version 10.6.8 v 1.1. When I start my MBP after 2 minutes it hangs. If I try to boot again the history repeats. When I boot from SnowLeo DVD (version 10.6.3) after 3-4 minutes of waiting (spinning wheel spins) I receive kernel panic message. After it I try to boot again and everything works. I tried to repair my HDD with Disk Utility (seems like it was needed to be repaired) but problem still present. I afraid to switch off my Mac. Any suggestions what could it be?
P.S. Sorry for my bad english, I was too lazy to learn it well.Boot sequence kernel panics before the appearance of the login screen or desktop are almost always hardware related, unless a specific driver was installed or specific hardware was connected which wasn't before. That it is coupled with a graphics display issue that often is chip related, says it is hardware related, since the only thing that controls the graphics on the boot screen is the graphics chip itself.
-
Hello good people
Out of nowhere my MacBook Pro has been acting funny. I have no clue to why this happened, but it happened after I rebooted the machine after Chrome started hanging while trying to purchase something. Chrome didn't crash or freeze, but no connections were working. I don't know for sure that my internet connection was working though. Anyway I figured I would close everything and try the ol' reboot trick, but when it booted a kernel panic happened. Since then a kernel panic happens every time I boot the machine. The panic logs are very similar though they don't match exactly.
Here are 4 of them on pastebin:
First: http://pastebin.com/UEVGr2RA
Second: http://pastebin.com/3EPPpJWQ
Third: http://pastebin.com/iVKZD87h
Fourth: http://pastebin.com/MEuUxWDt
I have tried resetting NVRAM and the SMC. Neither worked.
I can't boot in safe mode, but I can boot from an external hard drive connected via USB. Last week I installed an SSD drive and cloned my old harddrive, so I have a pretty similar setup on hand. It's the SSD drive that fails to boot.
The Disk Utility doesn't see anything wrong with either the permissions or the drive in general.
The disk mounts fine in Finder and I can seemingly browse all the data on there.
I removed the Little Snitch kext when I saw that on the first to panic logs right, but that didn't help either.
I tried the 'sudo touch /System/Library/Extensions' trick. Didn't help.
I am beginning to lean towards a reinstall but I really don't want to if I can avoid it, so I thought I'd throw it at the community. I hope someone out there can help. My own theory is that a file or something is corrupted and since I've got the same installation (albeit about a week old) I think I could replace the broken part if I can find out what it is.
Thanks in advance!Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Maybe you are looking for
-
I am unable to open raw files taken on my Canon Rebel T1i in my version of Photoshop CS3. When I import raw files into Bridge they come up as patches with CR2 on them and when clicked on, a notice comes up stating that Photoshop does not recognize t
-
Hi Can anybody explain me how to do bulk upload in SAP DMS. I want to prepare the metadata (with original file path) in Excel sheet and it has to be uploaded in SAP DMS along with original file. Thanks & Regards Harrshini Edited by: Harshini.A on Sep
-
Connecting to the update server
Everytime I start Firefox it tells me there is an update to install. When I go to install it, I keep getting "connecting to the update server", but it never goes anywhere from there. I have AVG on my computer, but I have already gone through the step
-
Zero hit for caching on content engine, why?
"show statistics http savings" reveals there's zero (0) hit for web requests. "show statistics http miss-reason" indicates most of them was due to "none_get_method". Now, what does that mean, and how can I increase the hits? We're using the exact sam
-
I love the Rachel Maddow Show but rarely get to watch it on TV. So I rely on the podcasts to listen to every day. I've been using Stitcher but Apple's more recent Podcast app has much better functionality (downloading episodes to listen to on the sub