NetBoot images are not showing up in the Startup Disk window

I have created a few Netboot images, enabled them and placed them in the correct place.
They don't show up in the Startup Disk window.
I have noticed that bootparamd is not running, and that after a while also bootpd disappeared.
Strange, no?
(I started them back up and it didn't make a difference.)
Message was edited by: marc herman

It looks like the NFS exports has separate entries for both:
/Volumes/xxxxx
/Volumes/xxxxx/Library/NetBoot/NetBootSP0
and that's not allowed. You can't separately export a directory and one of its subdirectories on the same file system.
It sounds like maybe the Server Admin tools are confused. If you don't really need /Volumes/xxxxx exported, then I think just deleting that share should fix things up.
If you can't get the tools to straighten things out, you could override all the NFS exports with your own defined in /etc/exports. There's an exports(5) man page that describes the format and creating an /etc/exports file will override anything in NetInfo (10.4 and earlier).
If you want to export both directories, they just need to be listed in the same exports entry, like:
/Volumes/xxxxx /Volumes/xxxxx/Library/NetBoot/NetBootSP0
This causes the "/Volumes/xxxxx" file system to be exported and allows only the directories "/Volumes/xxxxx" and "/Volumes/xxxxx/Library/NetBoot/NetBootSP0" to be mounted.
HTH
--macko

Similar Messages

  • WRT160NL DHCP reserved clients are not showing up in the DHCP Reservation window.... Why?

    I have 5 computers linked to my router. 4 are hardwired and I set it up so that each of the 5 has it's own static address. One of those computers is my DVR security camera system so can monitor my cameras remotely. It was working fine for years and now I can't access the DVR remotely anymore. I notice in the router Setup that the DHCP clients are not showing up as active even though two of the computers are on. I am running XP Pro on these machines and I can PING between them so I know some communication is going on. Also I can access the DVR cameras from my main computer using the internal IP address I assigned to the DVR, but not if I try to use my current WAN IP address.
    Would appreciate any advice on troubleshooting this problem.
    Thanks
    Solved!
    Go to Solution.

    It may have something to do with the firmware of the router. I suggest you should do that. The firmware that you can download from the Linksys website is version 1.0.0.3 Build 2. (http://support.linksys.com/en-us/support/routers/WRT160NL). After the upgrade, reset the router to factory settings (pressing and holding down the reset button). It is best to re-configure the router from scratch also. Try to power cycle your whole network as well.

  • My Firewire Clone is not showing up in the Startup Disk selection window

    Going to the Startup Disk section Under System Preferences to locate my mounted Firewire/cloned HD - But it's not showing up there for start up selection.
    The external firewire clone, running OS X 10.4.11 shows up in the finder right away. Also I have mounted and used it as the start up disk on several other computers just fine. The current computer I'm having issues mounting to is a: 2 ghz Intel MacBook with 1 gb ram running 10.4.11
    The previous computers that I have had success mounting to were a G4 ibook and a G5 imac(OSX 10.4.11). - Don't know if the Intel part is why I can't mount?
    Any ideas or fixes - Thanks!

    What to do if your computer won't recognize a FireWire device
    http://docs.info.apple.com/article.html?artnum=88338
    Dealing with FireWire problems (drives not mounting, devices unrecognized, etc.)
    http://www.macfixit.com/article.php?story=20041221081432908
     Cheers, Tom

  • My photos are not showing up in the 'Open File' window

    When I try to access my Aperture library through the 'Photo' button on the left hand column of the open file dialogue box, I see an option for aperture but it brings up an incomplete version of my library. There do not seem to be any other versions (or older versions) of my Aperture library floating around on my computer. Is this a refresh problem? Is there a way to force a refresh? Any help would be greatly appreciated.
    Thanks,
    Joel Richards

    Bob,
    I have had may similar problems lately, as I experiment with putting photos on my iPad and iPhone.  (iTunes uses previews from Aperture, and the media browser (File -> Open) uses previews too.)
    It seems that something went haywire with Aperture's preview generation in the last year.  All I can suggest (from my personal experience) is to select all the photos you want, delete the previews, close Aperture, restart Aperture, regenerate the previews, close Aperture, restart Aperture and then do a couple different random things while waiting to figure out what happened.
    I don't mean to sound unhelpful, but that actually is the set of steps I follow when trying to figure out what's wrong with my preview sharing.
    nathan

  • Why aren't my FW (PNG) image are not showing up

    Hey guys.
    This is really bugging the hell out of me. I feel like I
    can't move on until i can figure out why my PNG images are not
    showing up in preview (F12). They did yesterday before I deleted
    some pages and renamed old pages I no longer needed.
    All my images that was done in FW are in my root folder in
    the file panel. i didn't move any of those. When I double click on
    the image to bring up the "select image source" in the URL it
    starts off with two periods then a slash and then the name of where
    it's located as well as the name of the image. The "relative to":
    is site root. i didn't change any of these setting before I deleted
    and renamed pages in my file panel.
    Oh, and my Ap Divs show up in light gray boxes.
    Please help!
    CS3 Mac

    I'm confused by the subject line! Is this like 'all of your
    base are belong
    to us?' 8)
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Dooza" <[email protected]> wrote in message
    news:gki5he$3pu$[email protected]..
    > Why_ATL wrote:
    >> Hey Alan
    >> is the filename exactly what it should be? YES
    >> Are these .png files for web use, or are they PNG
    fireworks original
    >> files
    >> which are very large in file size because they
    contain all the info on
    >> layers and such? They are .png files for the web. I
    can't figure out why
    >> my Div is showing up in preview instead of my images
    There just Div's
    >> with the little blue question mark.
    >>
    >> This is getting harder and harder. I'm trying to
    laugh so i don't get a
    >> head ache over this. This is weird.
    >
    > Without a link we can only make wild stabs in the dark.
    >
    > Dooza

  • I am trying to create an responsive HTML5 output, but images are not showing up.

    When I preview my output, the images are note showing up. It is simply the blank outline of the image with the little image icon in the top left corner.
    As it is compiling I see the message "Warning: Image maps are not converted to relative size". Is there something in the setting that I need to change, or is that even the problem?

    Can you check your output folder: are the images copied to your output? If they are missing, are the images listed in the Project Manager pod in RoboHelp?
    The warning is unrelated. Since image maps work with pixel coordinates, you can't simply make them responsive. You are probably using an image map in your project. This is causing the warning. It is not a problem since the image map will still work. But if the image map is very large, it may give a bad experience on smaller screens. You may have to decide whether to change or remove the image map if you want to support mobile.

  • Why images are not showing?

    When I add to image to slider or products, the images are not showing and wrting <tag_image no link> or <tag_list image no link>. I already match pictures to image filed on web apps.

    Hi Alfred, so you know you will run into several issues if you do not follow naming conventions with folders and images on the web.
    If you have spaces for example this causes a lot of problems.
    That %20 stuff you see in your links are because you have spaces.
    Any time you have a space in a file or folder you should replace it with a -
    Removing them I can get a 404 error but support will only be the ones who can say if the images are uploaded correctly, they also may have not been saved correctly and are corrupted.
    But what you can try is renaming the folder to...
    granite-cobbles
    And try one of the images to be..
    sawnface-tubled-lrg.jpg
    And see if that works.

  • Email images are not showing in my new iPad.

    email images are not showing in my new iPad.  This was not a problem initially, but just started.  I use yahoo mail.  Any thoughts?

    This seems to be a problem with Yahoo! that started within the past few days.  I am assuming that you are accessing your Yahoo! Mail through Safari.  Until a fix is issued, you have two options -- (1) use the Mail app included in iOS, logging in with your Yahoo! account information or (2) when in Yahoo! Mail in Safari, click on your profile name/pic in the bottom left corner, choose Options, and then choose the last option, which displays your e-mail using the older classic version of Yahoo! Mail.  It's not as pretty or easy to manuever around, but at least it shows the images in your e-mails, which is the most important thing.  Both Apple and Yahoo! have been contacted about this issue, so hopefully a fix will be released soon.

  • My Websites are not showing up on the Creative Cloud Control Panel

    Hi guys,
    For some reason, just recently, my websites that I have hosted with BC, that I have built for clients, are not showing up on the right control panel? Usually when I load up CC, it shows the Website text as ...loading, then my sites appear... now, nothing.
    Help!?
    Thanks,
    Aaron

    This seems to be a bug with Creative Cloud. I am encountering the same issue. We've gone ahead and notified the product team, but for now, you can access your websites by directly logging into Business Catalyst: http://www.businesscatalyst.com/admin/Index.aspx. Use the same log in information that you use for your Creative Cloud memberhsip.
    Thank you for bringing this issue to our attention! Hopefully we'll get it sorted out soon.

  • My contacts are not showing up on the PC app or the web interface.  Why isn't this working?

    My contacts are not showing up on the PC app or the web interface.  Message+ works fine on my Note 4 though.  My contacts are saved in my Google account.
    I've tried several things but message+ acts like there are no contacts in the app yet there are names and pictures in my conversations.  Can anyone help me?

        matthttam,
    Let's make sure that we get you up and running with no issues. I want to make sure that we are on the same page. Are your contacts actually listed in the address book on your phone? Are you using Verizon Messages? Or the third party Messages  from the Play Store? Please keep us posted.
    KevinR_VZW
    Follow us on Twitter @VZWSupport

  • My pictures are not showing up at the email accounts I am sending them to from either of my iphones

    I take photos from both my 4 and 5 iphones and they are not showing up to the email addresses I send them to.  Help!

    Do you know where the folder should be?

  • Calendar invites are not showing up in the Calendar Inbox

    Calendar invites from Google Calendar are not showing up in the iPhone Calendar Inbox.  They do show up in the actual iPhone calendar (greyed out waiting for a response) but if you are managing multiple invites it's very important to view the invites especially if dealing with multiple invites on different days.  This is affecting users with Iphone4, 4s and 5 on multiple iOS's.

    Sorry for the late reply, it is still an irritating issue.  Apple says it's Google's poblem.  Google thinks it's Apple's issue.  Extremly irritating.
    I tried setting up the Calendar using the Exchange presets but that did not solve the invitation problem.

  • I tried using the Filmstrip Theme for a podcast but when  imported my Powerpoint slides as photos into iMovie they are not showing up in the project?? How can  fix this??

    I tried using the Filmstrip Theme to make a podcast and when I tried importing my Powerpoint slides as photos they are not showing up in the podcast, they are showing up as black or blank, how can I fix this??

    This may help:
    How to add a Powerpoint presentation to iMovie:
    http://www.wikihow.com/Add-a-PowerPoint-to-iMovie

  • Just got an iPad mini 3 and have not reset my iPad mini 3; is that why the photos from iCloud backup are not showing up in the new iPad?

    Just got an iPad mini 3 and have not reset my iPad mini 3; is that why the photos from iCloud backup are not showing up in the new iPad?

    Sorry, don't know what you are asking. You have an old iPad Mini 3 and a new iPad Mini 3?  How did you set up the new iPad? Did you restore it from a backup of the old iPad? What photos are you not seeing?
    Cheers,
    GB

  • Some email images do not show while using the icloud web app.  I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app.  Load HTML images is checked in preferences.

    Some email images do not show while using the icloud web app.  I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app.  Load HTML images is checked in preferences.  Is there a solution to this issue?

    I've seen the opposite issue.  My wife recieved an email with jpg attachments.  She couldn't see or print them on her iPhone 4S but they showed up fine in iCloud or in the mail app.  I had her forward the email to herself and then they showed up.  I assume there is an issue with how Apple is processing the attachments and resending causes them to get reformatted in a way that makes them easier to handle.
    So yeah.  Seems like some bugs.  Hope Apple fixes them soon.

Maybe you are looking for