Netboot Multi Cast Image not working
After reading through tons of documentation and forums I finally found that you can create (supposedly) a multi cast image in Disk Utility, then use System Image Utility to create a NetBoot image with it and have a multi cast image to deploy though NetBoot. However, it's not working.
I read if I mounted the image.dmg, then opened DU, Selected the image in DU's side bar, clicked "Image" from the menu bar, then "Scan image for restore..." it would automatically turn it into a multi cast image file. So I did that.
After the image went through the DU's image scanning process, I used System Image Utility to crate a "NetRestore Image". That process went though successfully, as well. I can see what appears to be the correct files under /Library/NetBoot/NetBootSP0. However, when I NetBoot the computers I want to re-image I see explication points over the NetInstall file and the NetInstall files don't look like the normal NetInstall icons.
I used the original image before to create a NetBoot image, but didn't do the "Scan image for restore..." and it was successful. But now that I've Scanned the image it won't work.
Does anyone know how to make it work?
Did I not do the multi cast process correctly?
Any tips or walkthroughs you could give would be really appreciated.
*Please, assume I'm stupid and give clear details of what to do, thank you!*
Here is what the computer's install options look like:
http://gallery.me.com/josephfrazier#100567/IMG_0909&bgcolor=black
Wow...deploystudio is amazing. Always works flawlessly for me and is super customizable. When was the last time you tried it? I think it is a lot easier and def. a lot less frustrating than netrestore which has never worked properly in the past for me. And they also have a dedicated forum for any issues you might have.
Similar Messages
-
Multi scanner software not working after E71 FW U...
Multi scanner software not working after E71 FW Update to 3.1
Nice bit of trouble-shooting. Thanks for sharing the final solution.
-
The multi-tabs is not working. I have the correct options set for multi-tabs. But when I open Firefox and try to add a site from Bookmarks it uses the same tab that is opened.
Right click a tab and you will get the option to bookmark all tabs. Or use keyboard '''Alt + B''' which opens the old style menu. You can make changes to Firefox, as explained in this post: [/questions/799856#answer-155765]
-
Multi touch gestures not working in mountain lion?
Any one else having problems with their multi gesture trackpad not working when you wake your notebook from sleeping with Mountain Lion? If I restart it fixes it but once it falls asleep it stops working again.
I've been having the same problem. When my MBP would wake from sleep any touch gestures that used more than two fingers would not work. I also had the issue where the MBP would forget the wireless network when it woke from sleep. I found this answer on another thread and it worked on both issues for me.
Instructions:
Reset PRAM: http://osxdaily.com/2010/11/15/reset-pram-mac/
Reset SMC: http://osxdaily.com/2010/03/24/when-and-how-to-reset-your-mac’s-system-managemen t-controller-smc/ -
1. Shed images not working as of Nov. 12 2009
Hi all
Thanks for all the info - but I'm still stumped. I have tried generating my .chm
files to the default SSL folders, manually copying all the child chms to the SSL
folder for the master project, letting RH copy them, generating all chms to an
external folder... no matter what I do, every time I recompile the master
project it picks up random old stuff. I have checked and rechecked that my
merged TOC items are to the latest child chms...
Sometimes when I recomplie the master project, even the content in that reverts
back to a previous version, sometimes it doesn't...
I have looked at the Merged Files list in the hhp file, I have deleted this file
and started my merge from scratch, I have manually deleted some paths (some
paths are to directories on the server where any files for this project have
long since been deleted...) directly in this file, but again every time I
recompile the master project it picks up random old versions of the child chms (
and the huge list of old merged files are put back in the hhp file. Even when I
delete all chms from all locations in the folder I'm working in on my C drive,
delete all the merged TOC items from the master project, save it, and
recompile it, the list of old merged files reappears in the hhp file).
Any more thoughts gratefully received:-)
Also - I don't have a Baggage Files folder??
One more thing... If I delete ALL the files under Merged Files in the hhp file using HTML Help Workshop, it crashes -
After "upgrading" from trial to FCPX 10.0.3 multi cam does not work
After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
When I double click the multi cam clip I see all four angles in the timeline, one underneath the other...
Any help is appreciated! Thanks!There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
in the iTunes Store.
The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
Can't recommend them enough. -
Multicast WDS Imaging Not Working - Doesn't show up when booted via PXE..?
I have a lab environment setup specifically for imaging laptops via WDS. I have a stand alone Windows 2012 server connected directly to an 8-Port Cisco SG-220 8 Port switch. Nothing else is connected to this server and it is not being
used for anything else. The server is running DHCP and WDS. I can boot laptops via PXE and connect to the WDS server to deploy the images through standard WDS imaging. However, I have not been able to get Multicasting to work. I
have never used Multicasting before and have read through the documentation but must be missing something. This is what I've done:
1. In the WDS server I right click on my deployment image and select 'create multicast image' then go through the prompts to create an auto-cast image.
2. The Multicast image is created and shown as 'waiting' on the WDS server.
3. The Cisco router is brand new out of the box, the only configuration I did was to enable IGMP snooping. I did not make any other changes to the setup of the switch.
4. I boot a target machine via PXE using the same Boot Image that I always use. It loads to the screen where I can select the image I want to deploy but it never shows the multicast image as an option. I only see the regular image I had previously
been using.
I'm not sure what else I'm missing in order to get the target machine to connect and image using the multicast image.
Here are a few screen shots of what I have setup:
Here is the multicast image created on the server
Here is the Cisco Router configuration:
Here is the NIC card configuration on the server:
This is the target laptop booted via PXE but it never shows the multicast image as an option.
/>Hi AdamNYC31,
The multicast feature used by WDS uses Internet Group Management Protocol (IGMP) version 3. Your network switches will need to support this, and you’ll need to configure them
for multicast. Please refer the following similar thread check each step Aaron Tyler and Ron St and Ankit Oberoi offered solution.
Multicast issue: Always "Waiting"
https://social.technet.microsoft.com/Forums/windowsserver/en-US/18122b39-e707-455d-b22f-956ebfb95e40/multicast-issue-always-waiting?forum=winserversetup
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Here is the link to my contact form page: http://www.healthquestpt.com/hpc/contact.html The captcha image isnt working and the form doesnt work. This image is in the directory "scripts/images"
These are the options I've tried so far:
<?php $random = rand(0,3); ?>
<img src="images/img_<?php echo $random; ?>.jpg"/><br />
<input type="hidden" name="captcha_code" value="<?php echo $random; ?>" />
<?php $random = rand(0,3); ?>
<img src="scripts/images/img_<?php echo $random; ?>.jpg"/><br />
<input type="hidden" name="captcha_code" value="<?php echo $random; ?>" />
<?php $random = rand(0,3); ?>
<img src="/scripts/images/img_<?php echo $random; ?>.jpg"/><br />
<input type="hidden" name="captcha_code" value="<?php echo $random; ?>" />
I've tried moving the images from the "scripts/images" to the "images" file in the main directory.
I've tried moving the contact.html into the "scripts" file
I've tried moving the formmailer.php into the main directory.
None of the above work so right now I have the contact.html in the main directory, the formmailer.php & images associated with formmailer in the "scripts" file and another set of the images in the "images" file in the main directory.
here is the link to the "scripts" folder: http://www.healthquestpt.com/hpc/scripts/
Please help.Ok den I did it but I only uploaded the index.html and the contact.html pages
heres the formmail.php code:
<?php
// dB Masters' PHP FormM@iler, Copyright (c) 2007 dB Masters Multimedia
// http://www.dbmasters.net/
// FormMailer comes with ABSOLUTELY NO WARRANTY
// Licensed under the AGPL
// See license.txt and readme.txt for details
// General Variables
$check_referrer="no";
$referring_domains="http://domain.com/,http://www.domain.com/,http://subdomain.domain.com/";
// options to use if hidden field "config" has a value of 0
// recipient info
$charset[0]="UTF-8";
$tomail[0]="[email protected]";
$cc_tomail[0]="";
$bcc_tomail[0]="";
// Mail contents config
$subject[0]="Home Physician Care Inquiry";
$reply_to_field[0]="Email";
$reply_to_name[0]="Name";
$required_fields[0]="Name,Phone,Email,Comments";
$required_email_fields[0]="Email";
$attachment_fields[0]="";
$return_ip[0]="yes";
$mail_intro[0]="The following inquiry has been made:";
$mail_fields[0]="Name,Address,City,State,Zip,Phone,Email,Comments";
$mail_type[0]="text";
$mail_priority[0]="1";
$allow_html[0]="no";
// Send back to sender config
$send_copy[0]="no";
$copy_format[0]="vert_table";
$copy_fields[0]="Name,Comments";
$copy_attachment_fields[0]="";
$copy_subject[0]="Subject of Copy Email";
$copy_intro[0]="Thanks for your inquiry, the following message has been delivered.";
$copy_from[0]="[email protected]";
$copy_tomail_field[0]="Email";
// Result options
$header[0]="";
$footer[0]="";
$error_page[0]="";
$thanks_page[0]="thanks.html";
// Default Error and Success Page Variables
$error_page_title[0]="Errors:";
$error_page_text[0]="Please use your browser's back button to return to the form and complete the required fields.";
$thanks_page_title[0]="Message Sent";
$thanks_page_text[0]="Thank you for your inquiry";
// Antispam Options
$empty_field[0]="nospam";
$character_scan[0]="Comments,Name";
$time_delay[0]="2";
$captcha_codes[0]="9C2449,EEADC8,77A585,D72838";
$max_urls[0]="2";
$max_url_fields[0]="Comments";
$flag_spam[0]="";
// options to use if hidden field "config" has a value of 1
// recipient info
$charset[1]="";
$tomail[1]="";
$cc_tomail[1]="";
$bcc_tomail[1]="";
// Mail contents config
$subject[1]="";
$reply_to_field[1]="";
$reply_to_name[1]="";
$required_fields[1]="";
$required_email_fields[1]="";
$attachment_fields[1]="";
$return_ip[1]="";
$mail_intro[1]="";
$mail_fields[1]="";
$mail_type[1]="";
$mail_priority[1]="";
$allow_html[1]="";
// Send back to sender config
$send_copy[1]="";
$copy_format[1]="";
$copy_fields[1]="";
$copy_attachment_fields[1]="";
$copy_subject[1]="";
$copy_intro[1]="";
$copy_from[1]="";
$copy_tomail_field[1]="";
// Result options
$header[1]="";
$footer[1]="";
$error_page[1]="";
$thanks_page[1]="";
// Default Error and Success Page Variables
$error_page_title[1]="";
$error_page_text[1]="";
$thanks_page_title[1]="";
$thanks_page_text[1]="";
// Antispam Options
$empty_field[1]="";
$character_scan[1]="";
$time_delay[1]="";
$captcha_codes[1]="";
$max_urls[1]="";
$max_url_fields[1]="";
$flag_spam[1]="";
// Don't muck around past this line unless you know what you are doing //
ob_start();
$config=$_POST["config"];
$debug=0;
$debug_text="";
// fix for Windows email server security
ini_set("sendmail_from",$tomail[$config]);
// email validation regular expression
$regex = "^[-a-z0-9!#$%&\'*+/=?^_`{|}~]+(\.[-a-z0-9!#$%&\'*+/=?^_`{|}~]+)*@(([a-z0-9]([-a-z0-9]*[a -z0-9]+)?){1,63}\.)+([a-z]([-a-z0-9]*[a-z0-9]+)?){2,63}$";
$header_injection_regex = "(\r|\n)";
if($header[$config]!="")
include($header[$config]);
if($_POST["submit"] || $_POST["Submit"] || $_POST["submit_x"] || $_POST["Submit_x"])
// begin global functions //
// get visitor IP
function getIP()
if(getenv(HTTP_X_FORWARDED_FOR))
$user_ip=getenv("HTTP_X_FORWARDED_FOR");
else
$user_ip=getenv("REMOTE_ADDR");
return $user_ip;
// get value of given key
function parseArray($key)
$array_value=$_POST[$key];
$count=1;
extract($array_value);
foreach($array_value as $part_value)
if($count > 1){$value.=", ";}
$value.=$part_value;
$count=$count+1;
return $value;
// stripslashes and autolink url's
function parseValue($value)
$value=preg_replace("/(http:\/\/+.[^\s]+)/i",'<a href="\\1">\\1</a>', $value);
return $value;
// html header if used
function htmlHeader()
$htmlHeader="<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01//EN\">\n<html>\n<head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=".$charset[$config]."\"></head>\n<body>\n<table cellpadding=\"2\" cellspacing=\"0\" border=\"0\" width=\"600\">\n";
return $htmlHeader;
// html footer if used
function htmlFooter()
$htmlFooter="</table>\n</body>\n</html>\n";
return $htmlFooter;
// build verticle table format
function buildVertTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
if($intro != "")
$message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"2\">".$intro."</td>\n</tr>\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$cur_value=$_POST[$cur_key];
if(is_array($cur_value))
$cur_value=parseArray($cur_key);
$cur_value=parseValue($cur_value);
if($allow_html[$config]=="no")
$cur_value=htmlspecialchars(nl2br($cur_value));
else
$cur_value=nl2br($cur_value);
$message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$cur_value."</td>\n</tr>\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="<tr>\n<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n<td align=\"left\" valign=\"top\" width=\"100%\">".$user_ip."</td>\n</tr>\n";
$message.=htmlFooter();
return $message;
// build horizontal table format
function buildHorzTable($fields, $intro, $to, $send_ip)
$message=htmlHeader();
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
if($intro != "")
$message.="<tr>\n<td align=\"left\" valign=\"top\" colspan=\"".$run."\">".$intro."</td>\n</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>".$cur_key."</b></td>\n";
if($send_ip=="yes" && $to=="recipient")
$message.="<td align=\"left\" valign=\"top\" style=\"white-space:nowrap;\"><b>Sender IP</b></td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$cur_value=$_POST[$cur_key];
if(is_array($cur_value))
$cur_value=parseArray($cur_key);
$cur_value=parseValue($cur_value);
if($allow_html[$config]=="no")
$cur_value=htmlspecialchars(nl2br($cur_value));
else
$cur_value=nl2br($cur_value);
$message.="<td align=\"left\" valign=\"top\">".$cur_value."</td>\n";
$message.="</tr>\n";
$message.="<tr>\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="<td align=\"left\" valign=\"top\">".$user_ip."</td>\n";
$message.="</tr>\n";
$message.=htmlFooter();
return $message;
// build plain text format
function buildTextTable($fields, $intro, $to, $send_ip)
$message="";
if($intro != "")
$message.=$intro."\n\n";
$fields_check=preg_split('/,/',$fields);
$run=sizeof($fields_check);
for($i=0;$i<$run;$i++)
$cur_key=$fields_check[$i];
$cur_value=$_POST[$cur_key];
if(is_array($cur_value))
$cur_value=parseArray($cur_key);
$cur_value=parseValue($cur_value);
if($allow_html[$config]=="no")
$cur_value=htmlspecialchars($cur_value);
else
$cur_value=$cur_value;
$message.="".$cur_key.": ".$cur_value."\n";
if($send_ip=="yes" && $to=="recipient")
$user_ip=getIP();
$message.="Sender IP: ".$user_ip."\n";
return $message;
// get the proper build fonction
function buildTable($format, $fields, $intro, $to, $send_ip)
if($format=="vert_table")
$message=buildVertTable($fields, $intro, $to, $send_ip);
else if($format=="horz_table")
$message=buildHorzTable($fields, $intro, $to, $send_ip);
else
$message=buildTextTable($fields, $intro, $to, $send_ip);
return $message;
// referrer checking security option
function checkReferer()
if($check_referrer=="yes")
$ref_check=preg_split('/,/',$referring_domains);
$ref_run=sizeof($ref_check);
$referer=$_SERVER['HTTP_REFERER'];
$domain_chk="no";
for($i=0;$i<$ref_run;$i++)
$cur_domain=$ref_check[$i];
if(stristr($referer,$cur_domain)){$domain_chk="yes";}
else
$domain_chk="yes";
return $domain_chk;
// checking required fields and email fields
function checkFields($text_fields, $email_fields, $regex)
$error_message="";
if($debug==1)
$error_message.="<li>text_fields: ".$text_fields."<br />email_fields: ".$email_fields."<br />reply_to_field: ".$reply_to_field."<br />reply_to_name: ".reply_to_name."</li>";
if($text_fields != "")
$req_check=preg_split('/,/',$text_fields);
$req_run=sizeof($req_check);
for($i=0;$i<$req_run;$i++)
$cur_field_name=$req_check[$i];
$cur_field=$_POST[$cur_field_name];
if($cur_field=="")
$error_message.="<li>You are missing the <b>".$req_check[$i]."</b> field</li>\n";
if($email_fields != "")
$email_check=preg_split('/,/',$email_fields);
$email_run=sizeof($email_check);
for($i=0;$i<$email_run;$i++)
$cur_email_name=$email_check[$i];
$cur_email=$_POST[$cur_email_name];
if($cur_email=="" || !eregi($regex, $cur_email))
$error_message.="<li>You are missing the <b>".$email_check[$i]."</b> field or it is not a valid email address.</li>\n";
return $error_message;
// attachment function
function getAttachments($attachment_fields, $message, $content_type, $border)
$att_message="This is a multi-part message in MIME format.\r\n";
$att_message.="--{$border}\r\n";
$att_message.=$content_type."\r\n";
$att_message.="Content-Transfer-Encoding: 7bit\r\n\r\n";
$att_message.=$message."\r\n\r\n";
$att_check=preg_split('/,/',$attachment_fields);
$att_run=sizeof($att_check);
for($i=0;$i<$att_run;$i++)
$fileatt=$_FILES[$att_check[$i]]['tmp_name'];
$fileatt_name=$_FILES[$att_check[$i]]['name'];
$fileatt_type=$_FILES[$att_check[$i]]['type'];
if (is_uploaded_file($fileatt))
$file=fopen($fileatt,'rb');
$data=fread($file,filesize($fileatt));
fclose($file);
$data=chunk_split(base64_encode($data));
$att_message.="--{$border}\n";
$att_message.="Content-Type: {$fileatt_type}; name=\"{$fileatt_name}\"\r\n";
$att_message.="Content-Disposition: attachment; filename=\"{$fileatt_name}\"\r\n";
$att_message.="Content-Transfer-Encoding: base64\r\n\r\n".$data."\r\n\r\n";
$att_message.="--{$border}--\n";
return $att_message;
// function to set content type
function contentType($charset, $format)
if($format=="vert_table")
$content_type="Content-type: text/html; charset=".$charset."\r\n";
else if($format=="horz_table")
$content_type="Content-type: text/html; charset=".$charset."\r\n";
else
$content_type="Content-type: text/plain; charset=".$charset."\r\n";
return $content_type;
// end global functions //
// begin procedural scripting //
// anti-spam empty field check
if($_POST[$empty_field[$config]] != "")
$empty_message = "<li>This submission failed and was flagged as spam.</li>\n";
// anti-spam character scan check
if(strlen($character_scan[$config]) > 0)
$spam_message="";
$field_check=preg_split('/,/',$character_scan[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
$cur_field_name=$field_check[$i];
$cur_field=$_POST[$cur_field_name];
if(preg_match("/<(.|\n)+?>/", $cur_field) || preg_match("/\[(.|\n)+?\]/", $cur_field))
$spam_message.="<li>This message contains disallowed characters.</li>\n";
// anti-spam time delay check
if((strlen($time_delay[$config]) > 0 && strlen($_POST["time"]) > 0) || (strlen($time_delay[$config]) > 0 && (strlen($_POST["time"]) == 0 || !$_POST["time"])))
if((time() - $_POST["time"]) < $time_delay[$config])
$time_message = "<li>This has been stopped by the timer, and is likely spam.</li>\n";
// anti-spam CAPTCHA check
if(strlen($captcha_codes[$config]) > 0)
$captcha_check=preg_split('/,/',$captcha_codes[$config]);
if(strtolower($_POST["captcha_entry"]) != strtolower($captcha_check[$_POST["captcha_code"]]))
$captcha_message = "<li>CAPTCHA test did not match.</li>\n";
// anti-spam max URL check
if(strlen($max_url_fields[$config]) > 0)
$max_url_message="";
$field_check=preg_split('/,/',$max_url_fields[$config]);
$field_run=sizeof($field_check);
for($i=0;$i<$field_run;$i++)
$cur_field_name=$field_check[$i];
$cur_field=$_POST[$cur_field_name];
preg_match_all("/http:/", $cur_field, $matches);
if(count($matches[0]) > $max_urls[$config])
$max_url_message.="<li>This message contains too many URL's.</li>\n";
// set anti-spam flagging option
if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) == 0)
$set_flag = 2;
else if(strlen($empty_message.$spam_message.$time_message.$captcha_message.$max_url_message) > 0 && strlen($flag_spam[$config]) > 0)
$set_flag = 1;
else
$set_flag = 0;
// header injection check
$security_filter="";
if(strlen($_POST[$reply_to_field[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_field[$config]]))
$security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
$reply_to_field_checked=$_POST[$reply_to_field[$config]];
if(strlen($_POST[$reply_to_name[$config]]) > 0)
if(eregi($header_injection_regex,$_POST[$reply_to_name[$config]]))
$security_filter.="<li>Header injection attempt detected, mail aborted.</li>\n";
else
$reply_to_name_checked=$_POST[$reply_to_name[$config]];
// check domain referrer and continue
$domain_chk=checkReferer();
if($domain_chk=="yes")
$error_message=checkFields($required_fields[$config], $required_email_fields[$config], $regex);
if(strlen($error_message) < 1 && strlen($security_filter) < 1 && $set_flag < 2)
// build appropriate message format for recipient
$content_type=contentType($charset[$config], $mail_type[$config]);
$message=buildTable($mail_type[$config], $mail_fields[$config], $mail_intro[$config], "recipient", $return_ip[$config]);
// build header data for recipient message
//$extra="From: ".$_POST[$reply_to_field[$config]]."\r\n";
$extra="From: ".$reply_to_name_checked." <".$reply_to_field_checked.">\r\n";
if($cc_tomail[$config]!="")
$extra.="Cc: ".$cc_tomail[$config]."\r\n";
if($bcc_tomail[$config]!="")
$extra.="Bcc: ".$bcc_tomail[$config]."\r\n";
if($mail_priority[$config]!="")
$extra.="X-Priority: ".$mail_priority[$config]."\r\n";
// get attachments if necessary
if($attachment_fields[$config]!="")
$semi_rand=md5(time());
$border="==Multipart_Boundary_x{$semi_rand}x";
$extra.="MIME-Version: 1.0\r\n";
$extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
$message=getAttachments($attachment_fields[$config], $message, $content_type, $border);
else
$extra.="MIME-Version: 1.0\r\n".$content_type;
// send recipient email
if($debug==1)
if($set_flag == 1)
$debug_text.="<p><b>Mail would have sent flagged for spam if not in debug mode.</b></p>";
else
$debug_text.="<p><b>Mail would have sent if not in debug mode.</b></p>";
else if($debug==0)
if($set_flag == 1)
$subject = $flag_spam[$config]." ".$subject[$config];
else
$subject = $subject[$config];
mail("".$tomail[$config]."", "".stripslashes($subject)."", "".stripslashes($message)."", "".$extra."");
// autoresponse email if necessary
if($send_copy[$config]=="yes")
// build appropriate message format for autoresponse
$content_type=contentType($charset[$config], $copy_format[$config]);
$message=buildTable($copy_format[$config], $copy_fields[$config], $copy_intro[$config], "autoresponder", $return_ip[$config]);
// build header data for autoresponse
$copy_tomail=$_POST[$copy_tomail_field[$config]];
$copy_extra="From: ".$copy_from[$config]."\r\n";
// get autoresponse attachments if necessary
if($copy_attachment_fields[$config]!="")
$semi_rand=md5(time());
$border="==Multipart_Boundary_x{$semi_rand}x";
$copy_extra.="MIME-Version: 1.0\r\n";
$copy_extra.="Content-Type: multipart/mixed; boundary=\"{$border}\"";
$message=getAttachments($copy_attachment_fields[$config], $message, $content_type, $border);
else
$copy_extra.="MIME-Version: 1.0\r\n".$content_type;
// send autoresponse email
if($debug==1)
if($set_flag == 1)
$debug_text.="<p><b>Autoresponder would have sent flagged for spam if not in debug mode.</b></p>";
else
$debug_text.="<p><b>Autoresponder would have sent if not in debug mode.</b></p>";
else if($debug==0)
$send_copy = 1;
if($copy_tomail=="" || !eregi($regex,$copy_tomail))
$send_copy = 0;
if($send_copy == 1)
if($set_flag == 1)
$copy_subject = $flag_spam[$config]." ".$copy_subject[$config];
else
$copy_subject = $copy_subject[$config];
mail("$copy_tomail", "".$copy_subject."", "$message", "$copy_extra");
// showing thanks pages from a successful submission
if($thanks_page[$config]=="")
echo "<h3>".$thanks_page_title[$config]."</h3>\n";
echo "<p>".$thanks_page_text[$config]."</p>\n";
if(strlen($debug_text) > 0)
echo "<p><b><i>".$debug_text."</i></b></p>\n";
else
header("Location: ".$thanks_page[$config]);
else
// entering error page options from missing required fields
if($error_page[$config]=="")
echo "<h3>".$error_page_title[$config]."</h3>\n";
echo "<ul>\n";
echo $security_filter.$empty_message.$error_message.$spam_message.$time_message.$captcha_messa ge.$max_url_message;
echo "</ul>\n";
echo "<p>".$error_page_text[$config]."</p>\n";
else
header("Location: ".$error_page[$config]);
else
echo "<h3>".$error_page_title[$config]."</h3>\n";
// message if unauthorized domain trigger from referer checking option
echo "<p>Sorry, mailing request came from an unauthorized domain.</p>\n";
// end procedural scripting //
else
echo "<h3>Error</h3>";
echo "<p>No form data has been sent to the script</p>\n";
if($footer[$config]!="")
include($footer[$config]);
ob_end_flush();
?> -
Google Images not working in Safari on Iphone
Since a while back the "images"-tab in google does'nt work on the iPhone in any of the browsers I've tried. I've searched the net to find others with the same problem but with little luck. Here's a description of the problem.
For example I search for "dog" in google in the Safari browser, this works just fine.
Then I press the "images"-tab and get a thumbnail view with pictures of dogs, of course.
But this is where it all goes wrong, when touching one of the images I get an enlarged view of an image next to it. The "back to the results" and "full image" buttons dim out (without being touchable) and swiping does not work. I don't know what has caused this to stop working properly, I know its not the new iOS version though.
HERE is a youtube video I prepared that explains the problem.
First, is there anyone else out there with this problem?
Second, this is what I've tried:
- Other iPhone web browser applications, for example "Mercury", "Opera Mini", "Skyfire" and none of them works except "Dolphin" (good work).
- Resetting any of the settings in the phone, clearing cache and such have no effect.
- Resetting the iPhone totally, factory settings. No effect.
- Using someone elses iPhone. I've tried on an iPhone 4 and iPhone 3S, same problems (with iOS 5.01).
- Trying out all of the settings in google, no change.
- Setting the google view to "classic" instead of "mobile" works of course, but that makes the site look just like on a PC or Mac and is not what I'm after.
Third, this problem seems to just affect Swedish users from what I can tell. There would be thousands of posts about this if everyone in the world was affected by it, but so far I've seen no posts on this matter. But after searching a while I found a swedish forum site on the subject. Link (in swedish). Also, when visiting google from Sweden some form of script automatically changes the url from .com to .se. I don't know if this has something to do with it?
Anyone know what causes this problem and how It might be resolved?
Best Regard
Stefan, SwedenHi Stefan,
First; this must be the most thorough error discription I have ever seen. Impressive.
Second; yep for a couple of weeks now I've been having exactly the same problems as you describe. One other thing that I've noticed, is that for me, the 'word suggestion drop down list' or whatever it's name is, no longer works. More specificly:
I open Safari in my iPhone, surf to Google image search and type for example "dog" in the search field. Below the field, I now get a list of suggested words or phrases that I think is based on the most popular searches. For me, the first suggestion in this list is "dogo argentino" (a specific and popular breed of dogs). When I tap on the words "dogo argentino", the search field normally would switch input from "dog" to "dogo argentino" AND starts the image search automatically. However, since the problem showed up, when I tap on "dogo argentino" the input field is not affected (still reads "dog") and I would have to type "dogo argentino" manually and hit "search".
I use a Swedish iPhone 4S (5.0.1 (9A406)) in the Telenor network. I also have tested the same possible solutions that you describe in your post, but with no luck.
All the best,
Ingo -
Multi room dvr not working in other rooms
My mr dvr is not working in any of my other rooms. It has never worked. I just don't have the time to sit on the phone with tech support.
I have 3 other sd stb in other rooms and I have programs recorded on the dvr that are not in H. So shouldn't i be able to watch these in the other rooms?
When I look at my Fios TV info online it states this "Your STB record cannot be found."
any help would be appreciated
Solved!
Go to Solution.It is listed on my bill under TV additional services. " home media dvr- high definition" is this just for the actual DVR unit? Do I have to pay for the unit and then pay an additional amount for special programing? If so why wouldn't I have opted for the regular DVR instead of the Multi room dvr? I guess I will be spending most of my night on the phone with verizon!!!!
thanks for your help. -
I signed up for Home Media DVR, however, I have never been able to view recorded programs from the other tv. After a VERY lengthy phone call with tech support the problem remains unchanged. They had me unplug every set top box and the router and then power them back. They also did several remote system re-sets... No luck.
The phone call ended with Tech support mistakenly claiming that my router wasn't working (the actual problem with the router was that the wireless settings changed when they asked me to re-set it). I figured this out on my own, after hanging up. So, they sent out a new router, which actually doesn't work. All lights come on as expected except the "internet" light is orange instead of green.
Anyway, the old router is working fine but I can't get the multi room dvr to work. I saw another post where a Verizon rep replied that they "waived their magic wand" and the problem was resolved! Still got that magic wand??
Solved!
Go to Solution.Hello. I can do a deep dive for you. Please Message me your Tele# so I can check our system and assure your hub is properly setup for MR DVR. I will assist you in getting this resolved right away.
Joe D
Verizon Telecom
Fiber Solution Center
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.Follow us on Twitter™! -
Why is code to get center of image not working?
Hey there. I have am trying to establish the center of the imags that load so that I can put them in the center of the stage. I am doing this as each image is a different size.
Here is the code i have gotten to work before but its not working now and I have been searching to find what I have done wrong with no luck. : (
Would you look it over and maybe you will see what I am doing wrong?
public function placePicture(e:Event = null):void {
rawImage = imageData.image[imgNum].imageURL;
lastImageIndex = imageData.*.length() - 1;
imageLoader = new Loader;
imageHolder = new Sprite;
imageLoader.load(new URLRequest(rawImage));
imageLoader.x -= imageLoader.width/2; //this should set the image to the center no?
imageLoader.y -= imageLoader.height/2;
imageHolder.x = 640; //this is the center of the stage
imageHolder.y = 100;
imageHolder.addChild(imageLoader);
masterHolder.addChild(imageHolder);
The result when I publish is the picture comes on stage but the top left corner goes to 640 instead of the center of the image going to 640.
I tried several variations of this all with the same result:
imageLoader.x = -1*imageLoader.width/2;
I tried using setRegistrationPoint with the following tutorial: http://flashscript.ca/set-registration-as3.php
and I tried doing all of the above by inserting the loader into a sprite and then applying the code to the sprite and then adding that sprite to another sprite and putting that at 640 and not inserting it in another sprite and trying to straight up put the existing sprite at 640 (hopefully that all makes sense). And I have tried to put it to width/3 and nothing different happens.
If you have any other ideas or can see what I am doing wrong I would really be gratefull for some tips! : )
Thanks for any help!
oh, and I am getting no errors on this.the image's width and height are not available until loading is complete. ie, use a complete listener/listener function.
-
Anychart save as pdf/image not working
A while ago I posed this question when the right click, save as stopped working on my APEX charts
Apex charts - right click, save as image (not responding)
The problem resolved when anychart.com was back up, but the problem is occurring again and I wonder if they've moved their php files. Not even in Hilary's sample app is working. We think this happened within the last month.
After choosing save as image and a location, the "saving" just keeps spinning.
Most anychart google results at the moment seem to revert to the same landing page, and webcached copies refer to locations that no longer exist.
I wonder with post anychart7 cleanup, have they moved the supporting php files? For instance, this location no longer exists
http://www.anychart.com/products/anychart/saveas/pdf/PDFSaver.php
A workaround is to use a local copy of the php file with custom XML
<settings>
<pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
But I only have the PDFSaver, not the AnyChartPNGSaver.php
This file no longer exists either:
http://anychart.com/products/anychart/docs/users-guide/export_image_scripts/php.zip
Does anyone know where I can source the png saver php, or suggest another workaround? Or have any other information on this issue.
An email to [email protected] back in 2013 got no reply.
APEX 4.2.0
Scott.Hi Scott,
So, if i understand properly, making this change
<settings><pdf_export file_name="mychart.pdf" use_title_as_file_name="true" url="/i/AnyChart4_SaveAsPDF_php4/PDFSaver.php" image_type="jpg" />
will avoid atleast PDF issue? And as i dont have privileges to install or deinstall anything on /i/ folder, still this will work and URL path will remain same for each installation?
Adding another question, as you said "it sends base64 information when converting to PDF", does it mean i will not be able to convert to PDF, if i am using intranet and PC's not accessible to internet?
Thanks
Sunil Bhatia -
Swap Image not working Except in IE
I am working on a class project, and we've just learned how
to do "swap image" on rollover. It's working beautifully when in
IE, but in Firefox it's not working at all and in Opera it's
working strangely (only when on the "edges" of the flash text not
when rolling over the flash text) Any ideas as to the problem? The
flash text rollover works (changes colors), but the "bubbles" are
supposed to swap images. BTW, I thought it might be a setting in my
browser disabling something, but the swap image on classmates'
sites show up fine.
http://198.86.244.3/drsimpson/WEB140/drsimpsongallery/
ThanksI can't see what is the problem. :-(
Try replacing your flash buttons with plain gif images, it
works the same way and you will have much less code on your page. I
don't think the problem is there but you can always try. -
Splash image not working in JNLP
Hi all...
Splash image is not get displayed in my Application..
Here is my JNLP file.
<jnlp spec="6.0+" codebase="http://localhost:8080/MyProject/">
<information>
<title>MyProject1.0</title>
<vendor>My Company.</vendor>
<homepage href="null"/>
<description>Application Launcher For MyProject1.0</description>
<icon href="http://localhost:8080/MyProject/images/Splash_MyProject.jpg" height="300" width="560" kind="splash"/>
<offline-allowed/>
</information>
<security>
<all-permissions/>
</security>
<update check="timeout" policy="always"/>
<resources>
<java version="1.6"/>
<jar href="http://localhost:8080/MyProject/SwingApplication/mysql-connector-java-5.0.6-bin.jar" download="eager" main="false"/>
<jar href="http://localhost:8080/MyProject/SwingApplication/MyProject1.0.jar" download="eager" main="true"/>
<jar href="http://localhost:8080/MyProject/SwingApplication/liquidlnf.jar" download="eager" main="false"/>
</resources>
<application-desc main-class="com.mycompany.ui.MainWindow">
<argument>production%0%3#com.mysql.jdbc.Driver#MyProject4%jdbc:mysql://10.100.1.89:3306/MyProject4%MyProject%info123#MyProject2%jdbc:mysql://10.100.1.89:3306/MyProject2%MyProject%info123</argument>
</application-desc>
</jnlp>Splash image not get displayed and then I change *<java version="1.6"/>* to *<java java-vm-args="-splash:resource/images/Splash_MyProject.jpg" version="1.6"/>*
still splash image not get shown on application startup..
no java.awt.SplashScreen() class instance found.
Plz anybody give some idea...I have also a problem with the splash screen not displaying. This is the first relevant portion of the jnlp:
<jnlp spec="1.5+" codebase="http://www.i-modulas.nl/downloads/"
href="imodulas.jnlp">
<information>
<title>i-Modulas Thin Client</title>
<vendor>i-Modulas Software BV</vendor>
<icon kind="splash" href="http://www.i-modulas.nl/downloads/javathinsplash.jpg"/>
</information>
<security>
<all-permissions/>
</security>
<resources>
<j2se version="1.5+"/>
<jar href="isrun.jar"/>
<property name="iscobol.conf" value="http://www.i-modulas.nl/downloads/javaclientproperties.txt"/>
</resources>
<resources os="Windows">
<property name="swing.defaultlaf" value="com.sun.java.swing.plaf.windows.WindowsLookAndFeel" />
</resources>
<resources os="Linux">
<property name="swing.defaultlaf" value="com.sun.java.swing.plaf.gtk.GTKLookAndFeel" />
</resources>
The application starts normal and uses a different look and feel under Windows as under Linux, but I do not see the splash screen. I tried different ways of referencing to the picture and I also tried using a .gif format. It never worked!
Any suggestions are welcome!
Ren�
Maybe you are looking for
-
Win 8.1, iMac Retina 3TB Fusion, Yosemite, Boot Camp fail!
I've got a new iMac Retina with the 3TB Fusion drive on which I wanted to install Win 8.1 using Boot Camp. I have VMWare Fusion installed and running, but figured Boot Camp might be better for my needs. I read the Boot Camp Assistant instructions and
-
Unable to get 'InitialContext' using Java Client in Oracle App 10.0.2.0
Scenario & Problem Description: Unable to get 'Initial Context' using Simple Java Client in Oracle Application Server 10.0.2.0 I'm having an issue while I try to initialize the Initial Context for an EJB lookup from a simple Java Client [local lookup
-
MMy iPod is workin,but my charger no longer fixes all the way in the slot to recharge it. Want should I do. Thank you
-
Changed reconciliation account in vendor master - Report FAGLF101
Hi When a Recon account is changed in the Vendor Master, a report has to be run to post the adjustment entries using T-Code FAGLF101. The query is that, the report posts the adjustment entries through an adjustment account but at the same time also r
-
Saving links... not what you're thinking
Here's what i want to do. I have a site similar to something like http://www.apple.com/pro/tips/ I want to save the contents of every link on this page to either a number of pdfs, or a single pdf so that i can view offline and potentially print. The