NetBoot unique names

I see it's been asked before how to have netboot clients have unique names, but I don't see this answer. In the Sharing Prefs of System Image Utility there is an option to spec a File Path for a file. They don't get any more detailed, but I did find this after searching apple.com:
Note: Alternatively, type the path to a tab-delimited .txt or .rtf file that has a list of MAC addresses and their corresponding computer names and local hostnames. Each client will get the name that corresponds to its MAC address in the specified file.
But no more info. Does anybody have the exact formatting required for such a file?
thanks
-gary

Hi Gary Jaeger-
Take a look at Chapter 11 of this manual: Mac OSX Server Command-Line Administration For Version 10.4 or Later Second Edition
Hope it helps.
Luck-
-DaddyPaycheck

Similar Messages

Export as Separate PDF Pages with Unique Names

I have an InDesign document that has several pages. I want to export each page as a seperate PDF, but they have to have a unique name that I want to be able to specify.
For example, I want to export page 1 as "calendar page 2014"
Page 2 as "Diary page 2014" etc.
I found some solutions, but they aren't quite what I need:
Export as Seperate pages with image name
This apple script takes the name of the first image on the document and uses that as the name.
However, my document has no images.
Exportools
A paid tool that offers many options for exporting. However, the name has to be based on a pattern, which is no good for me.
I'm hoping that there will be a script that can take the name from a non-printing area/layer. That way, I can just put the desired name on the page and it will export with that name each time.

have you looked at the extention Autosplit PRO? This may be what you are looking for. (Although, I don't think this software is compatable with MAC...but if you find out otherwise, please advise!)
good luck..

Error message when trying to create a unique name

Why do I keep getting an Error message when trying to create a unique name for a location on your site. I am simply looking to use your free 2GB space to store some pics and vids but keep getting an error message.

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

In 14 I can no longer give my downloads a unique name, even if I have the option to selection download location.

Before I upgraded to FF 14, I could give my downloads a unique name. I can no longer do that. Evne if i have selected the option "Always ask me where to save files" . Im able to set where to download them but I am not able to give them my own name. I run Win 7 Home. Its very very inconvenient becuase I have to manually go back and rename 80% of the files I download. IS there a fix??

Hi,
You can consider the [https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems Reset Firefox] feature via '''Help''' ('''Alt''' + '''H''') > '''Troubleshooting Information'''. To revert to the previous profile, you can close the new profile, start Firefox and choose the '''*.default''' profile. While the [https://support.mozilla.org/en-US/kb/profile-manager-create-and-remove-firefox-profiles Profile Manager] is open, you can also delete the newly reset profile (the one containing random numbers).
[https://support.mozilla.org/en-US/kb/Managing-profiles Managing profiles]
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]

Create multiple instances of same class but with unique names

Hi,
I'm creating an IM application in Java.
So far I can click on a user and create a chat session, using my chatWindow class. But this means I can only create one chatWindow class, called 'chat'. How can I get the application to dynamically make new instances of this class with unique names, for examples chatWindowUser1, chatWindowUser2.
Below is some code utlising the Openfire Smack API but hopefully the principle is the clear.
    private void chatButtonActionPerformed(java.awt.event.ActionEvent evt) {
        int selectedUserIndex = rosterList.getSelectedIndex();
        String selectedUser = rostAry[selectedUserIndex].getUser();
        System.out.println("Chat with: " + selectedUser);
        if (chatBox == null) {
            JFrame mainFrame = CommsTestApp.getApplication().getMainFrame();
            chatBox = new CommsTestChatBox(mainFrame,conn,selectedUser);
            chatBox.setLocationRelativeTo(mainFrame);
        CommsTestApp.getApplication().show(chatBox);
}

yes, an array would work fine, just realize that by using an array, you're setting an upper bound on the number of windows you can have open.
As for unique names, if you mean unique variable name, you don't need one. The array index serves to uniquely identify each instance. If you mean unique title for the window, set that however you want (username, index in array, randomly generated string, etc.). It's just a property of the window object.

Post-upgrade ToDo, PI configuration Wizard: com.sap.security.api.DuplicateKeyException Group found, but unique name "SAP_SLD_DATA_SUPPLIER" is not unique!

after PI-Upgrade to NW-PI-731-SP07, executing the PI-configuration wizard:
step 126 of 162
Assign SLD Data Supplier user to Group SAP_SLD_DATA_SUPPLIER (local SLD)
Error:
Group found, but unique name "SAP_SLD_DATA_SUPPLIER" is not unique!
Execute Java Service
Library: sap.com/tc~lm~ctc~util~core_ear
Class: com.sap.ctc.util.core.services.UserFacade
Method: void com.sap.ctc.util.core.services.UserFacade.addUserToGroup(java.lang.String, java.lang.String)
Arguments (2)
userName : SLD_DS_EXE
groupName : SAP_SLD_DATA_SUPPLIER
InvokeService- Result: ERROR
Refresh Env. Messages: false
Duration: 1.936 sec
Library Info
Default Trace
Exception Class: com.sap.security.api.DuplicateKeyException
Exception Message: Group found, but unique name "SAP_SLD_DATA_SUPPLIER" is not unique!
com.sap.security.api.DuplicateKeyException: Group found, but unique name "SAP_SLD_DATA_SUPPLIER" is not unique!
at com.sap.ctc.util.infra.rfc.BaseConfig.dispatchException(BaseConfig.java:230)
at com.sap.ctc.util.core.services.impl.ume.java.GroupJavaImpl.verify(GroupJavaImpl.java:121)
at com.sap.ctc.util.core.services.impl.ume.DualGroupImpl.verify(DualGroupImpl.java:118)
at com.sap.ctc.util.core.services.content.ume.UserService.addToGroup(UserService.java:725)
at com.sap.ctc.util.core.services.UserFacade.addUserToGroup(UserFacade.java:288)
what to do?
============
o.k.
https://service.sap.com/sap/support/notes/1016283
first run the UME consistency check => found some inconsistency => did repair UME
then run again UME consistency check => found no more inconsistency !!
the again - try to run the PI-Upgrade-Wizard => but again error on executing .....

see this sap-notes:
http://service.sap.com/sap/support/notes/1617234
http://service.sap.com/sap/support/notes/1661135
http://service.sap.com/sap/support/notes/1678815
http://service.sap.com/sap/support/notes/1626747

Move files and create unique name something wrong with my script

Can you see where I might be going wrong here?
Just trying to create a unique name if something exists.
In English.
Move file to the destinationFolder
Item exists in destinationFolder > Move file in the destination folder to the fake Trash > If it exists in fakeTrash too then give it a new name an ending of_a.psd then out it in the trash
Once thats done move start file to the destination folder.
Currently when the file exists in the destination folder and in the trash, I get the prompt then the error
error "System Events got an error: Can’t get disk item \"NN_FR10WW06290PK3LE.psd\"." number -1728 from disk item "NN_FR10WW06290PK3LE.psd"
set fileMatrix to {¬
          {folderName:"BHS", prefixes:{"BH", "SM", "AL"}}, ¬
          {folderName:"Bu", prefixes:{"BU"}}, ¬
          {folderName:"Da", prefixes:{"ES"}}, ¬
          {folderName:"Di", prefixes:{"DV"}}, ¬
          {folderName:"Do", prefixes:{"DJ", "RA"}}, ¬
          {folderName:"In", prefixes:{"GT", "CC"}}, ¬
          {folderName:"Fr", prefixes:{"FR"}}, ¬
          {folderName:"No", prefixes:{"NN"}}, ¬
          {folderName:"Ma", prefixes:{"MA", "MF", "FI", "MC", "MH", "MB"}}, ¬
          {folderName:"Pr", prefixes:{"PR"}}, ¬
          {folderName:"To", prefixes:{"TM15", "TM11", "TM17"}}, ¬
          {folderName:"Wa", prefixes:{"WA"}}, ¬
          {folderName:"Se", prefixes:{"SE"}}}
tell application "Finder"
          set theHotFolder to folder "Hal 9000:Users:matthew:Pictures:HotFolderDone"
          set foldericon to folder "Hal 9000:Users:matthew:Pictures:Icons:Rejected Folder Done"
          set fakeTrash to folder "Hal 9000:Users:matthew:FakeTrash"
---here
          repeat with matrixItem in fileMatrix -- look for folder
                    set destinationFolder to (folders of desktop whose name starts with folderName of matrixItem)
                    if destinationFolder is not {} then -- found one
                              set destinationFolder to first item of destinationFolder -- only one destination
                              set theFolderName to name of destinationFolder
                              repeat with aPrefix in prefixes of matrixItem -- look for files
                                        set theFiles to (files of theHotFolder whose namestarts with aPrefix) as alias list
                                        if theFiles is not {} then repeat with startFile intheFiles -- move files
                                                  try
move startFile to destinationFolder
                                                  on error
activate
                                                            display dialog "File “" & (name ofstartFile) & "” already exists in folder “" & theFolderName & "”. Do you want to replace it?"buttons {"Don't replace", "Replace"} default button 2 with icon 1
                                                            if button returned of result is "Stop"then
                                                                      if (count theLastFolder) is 0 thendelete theLastFolder
                                                                      return
                                                            else if button returned of result is"Replace" then
                                                                      set fileName to get name ofstartFile
                                                                      if exists file fileName indestinationFolder then ¬
                                                                                try
--next line moves existing file to the faketrash
move file fileName of destinationFolder to fakeTrash
move file startFile to destinationFolder
--if it already exists in fake trash give it a new name then move that file to fake trash
                                                                                on error errmess numbererrnum -- oops (should probably check for a specific error number)
                                                                                           log "Error " & errnum& " moving file: " &errmess
                                                                                           set newName to mygetUniqueName(fileName,fakeTrash)
                                                                                           set name of fileNameto "this is a unique name"-- or whatever
                                                                                           set name of fileNameto newName
--Now move the renamed file to the fake trash
move file fileName to fakeTrash
--now move the startfile to destination folder
move file startFile to destinationFolder
                                                                                end try
                                                            else -- "Don't replace"
                                                                      if not (exists folder "Hal 9000:Users:matthew:Desktop:Rejected Folder Done") then
                                                                                set theLastFolder toduplicate foldericonto desktop
                                                                      else
                                                                                set theLastFolder to folder"Hal 9000:Users:matthew:Desktop:Rejected Folder Done"
                                                                      end if
                                                                      delay 0.5
move startFile to theLastFolder with replacing
                                                            end if
                                                  end try
                                        end repeat
                              end repeat
                    end if
          end repeat
          try
                    if (count theLastFolder) is 0 then delete theLastFolder
          end try
end tell
to getUniqueName(someFile, someFolder)
     check if someFile exists in someFolder, creating a new unique file name (if needed) by adding a suffix
          parameters -          someFile [mixed]: a source file path
                              someFolder [mixed]: a folder to check
          returns [list]:          a unique file name and extension
          set {counter, suffixes, divider} to {0, "abcdefghijklmnopqrstuvwxyz", "_"}
          set someFile to someFile as text -- System Events will use both Finder and POSIX text
          tell application "System Events" to tell disk item someFile to set{theName, theExtension} to {name, name extension}
          if theExtension is not "" then set theExtension to "." & theExtension
          set theName to text 1 thru -((length of theExtension) + 1) of theName -- just the name part
          set newName to theName & theExtension
          tell application "System Events" to tell (get name of files of folder(someFolder as text))
                    repeat while it contains newName
                              set counter to counter + 1 -- hopefully there aren't more than 26 duplicates (numbers are easier)
                              set newName to theName & divider & (item counter ofsuffixes) & theExtension
                    end repeat
          end tell
          return newName
end getUniqueName

There are numerous errors in your script, and it's a large script so there might be more, but these are the standouts for me:
At line 48 you:
                                                                      set fileName to get name of startFile
which is fair enough - you then use this to see if the file already exists in the destinationFolder. However, if it does the logic about how to deal with that is flawed.
At line 56 you catch the error:
                                                                                on error errmess number errnum -- oops (should probably check for a specific error number)
                                                                                          log "Error " & errnum & " moving file: " & errmess
                                                                                          set newName to my getUniqueName(fileName, fakeTrash)
                                                                                          set name of fileName to "this is a unique name" -- or whatever
                                                                                          set name of fileName to newName
--Now move the renamed file to the fake trash
move file fileName to fakeTrash
--now move the startfile to destination folder
move file startFile to destinationFolder
                                                                                end try
so let's focus on that.
56: catch the error
57: log the error
58: generate a new unique filename
59: change the name of fileName to some other string
Hang on, wait a minute.... we already ascertained that at line 48 you defined fileName as a string object that indicates the name of the file. This is just a string. It's no longer associated with the original file... it's just a list of characters. Consequently you cannot set the 'name' of a string, hence your script is doomed to fail.
Instead, what I think you want to do is set the name of the startFile to the unique string. Files have filenames, and therefore you can set the name.
You have a similar problem on line 64 where you try to 'move file filename to fakeTrash'. fileName is just a string of characters. It isn't enough to identify a file - let's say the file name is 'some.psd'. You're asking AppleScript to move file some.psd to the trash. The question is which some.psd? The one on the desktop? in your home directory? maybe on the root of the volume? or maybe it should search your drive to find any/all files with that name? nope. None of the above. You can't just reference a file by name without identifying where that file is. So you probably want to 'move file fileName of destinationFolder...'
There may be other problems, but they're likely to be related - all issues with object classes (e.g. files vs. strings), or not being specific about which object you want.
As I said before, though, I might be way off - you don't say where the error is triggered to make it easy to narrow down the problem. Usually AppleScript will highlight the line that triggered an error. Knowing what that line is would help a lot.

How to get LR using unique names for each file?

Hey there,
I see LR does modify the name of the File when there is already one file with the same name in the folder of import, but once you choose a different folder it does import the File with the original name. I just realized that over the years using Folders such as Pictures 2009, Pictures 2010 and so on, I have three or four times Files with the same Name. Is there a way to tell LR to always use unique names when it imports?

Use a date-description-sequence.ext naming template for renaming as you import [or if you prefer after you import]. This means you never have duplicates unless you for some bizarre reason use same name description for two sets of files on same day. And if you need to do just that, simply make the start number of second/third lot of files be one number greater than previous batch from same day.
You can set up what ever naming format you desire in file rename dialogue and have that as your default.
Leaving files names as they come out of the camera is asking for big trouble as invariably they will duplicate, which is not a good idea even if in different folders.
F2 gets you renaming dialogue when in Library.

LDAP Profile Source - "Remote Unique Name" oddity

We have an Active Directory that I've set up to use as an Authentication Source, and it also retrieves a few properties from there - not a problem.
We also have an LDAP directory which contains other attributes of users that I need to retrieve.
I set everything up as I thought it should be, however it's querying the LDAP server with the wrong parameters!
An example user I have is IUSER\803244205. ALUI is showing the Login Name as "IUSER\803244205", the Remote Unique Name as "137eb349-7579-4b15-9a68-b1bff296d933" and the Remote Authentication Name as "803244205@IUSER".
When I look at the LDAP job, the error log is showing that it's trying to sync using the Remote Unique Name -
Unable to attach to user 137eb349-7579-4b15-9a68-b1bff296d933, user not found
My LDAP directory only holds (and is keyed on) the numeric portion of the login name (known as EIN to us) - 803244205. I have got this EIN as a property of the user (a seperate Property that I have mapped to the User object), which is held as a seperate attribute on the Active Directory.
So how do I tell the sync job to use the EIN (which happens to be the "User Name Attribute" on the Authentication Source - samAccountName), rather than trying to use the "Remote Unique Name", which it appears to have generated for itself!
Cheers

Arrgh! Just found the option for myself, seconds after posting this! Cheers anyway.

Netboot computers and netbooted computer name problems

i have 14 imacs that i netboot. prior to tiger the netbooted computer names would be assigned noramlly say netboot001, netboot002 up to 14.
with tiger and the system image utility when i run a new netboot image sometimes the computer name is netboot001 etc and sometimes it replicates out say frederick charrons computer(1), frederick charrons computer(2).
i assume that there is a problem in the way the computer names are dished out to the netbooted imaces and there fore i assume there may be a potential for prblems with information back and forth to the server. can anyone help me with this and offer a solution that i may be missing.
i have been netbooting imaces since imacs and server were made available and this is the only time that i hav experienced this problem, ile with tiger server.
osx server Mac OS X (10.4.5)

There is not a problem with having identical usernames on two different computers. You also suggested the "Computer name" was the same. Is this the computer name at the top of the "Sharing" preference panel? If so, those need to be different.

Validation for Unique Name and Non-AlphaNumeric Characters

Hi All,
How to do Unique name and Non-Alpha Numeric Characters Validation?
Name should be unique and only allow alphanumeric characters.
Where all validations must be done? In EOImpl or any other file?
Plz help
Thanks,
Sk

SK
Here are the steps you need to perform to check duplicate Employee Names need not entered by user.
First create a VVO in your schema.server package(that of EO) with the following query.Generate both VVOImpl and VVORowImpl file.
select full_name
from fwk_tbx_employees
where full_name =:1Now add this VVO to your VAM means give instance to it.
Now open the VVOImpl and write below code to execute query based on new name entered by user
    public void initQuery(String name)
      setWhereClauseParams(null); // Always reset
      setWhereClauseParam(0, name);
      executeQuery();
    }Now open Your Entity Expert class and add below method in it
   public boolean isEmployeeNameExists(String name)
     boolean isExists = false;
           // Note that we want to use a cached, declaratively defined VO instead of creating
           // one from a SQL statement which is far less performant.
     EmployeeNameVVOImpl employeeNameVVO =
       (EmployeeNameVVOImpl)findValidationViewObject("EmployeeNameVVO1");
     employeeNameVVO.initQuery(name);
     // We're just doing a simple existance check. If we don't find a match, return false.
     if (employeeNameVVO.hasNext())
       isExists = true;
     return isExists;
   }Now you need to call this expert class method from setter method of EOImpl for name.so Open your EOImpl file and go to setter method of name
      if ((value != null) || (!("".equals(value.trim()))))
        EmployeeEntityExpert expert = getEmployeeEntityExpert(getOADBTransaction());
        if (!(expert.isEmployeeNameExists(value)))
            throw new OAException("Duplicate Employee Name", OAException.ERROR);
      }Remember to write code above setAttributeInternal.
Hope it helps!!!!
Let me know if you have queries in it.
Thanks
AJ

Create a temp file with unique name?

Hi all,
I need to create a temporary IResource in a KM repository. Is there any equivalent to the java.io.File.createTempFile() method to create a IResource with a unique name that isn't already there?
Thanks for your help,
Markus

Hi Markus,
AFAIK there is no such method.
However, you can implement it yourself by using a simple rule,
such as to concat a timestamp ((new Date()).getTime()) to the created resource's name.
For an even more robust rule, you can also concat the creator's login-name.
Hope that helps,
Yoav.

Identifying Multiple printers with unique name?

I support an office staff of 40 users that share 15 Officejet 100 L411a printers. When users connect a printer by USB, the computer will create a new printer with the default name "HP Officejet 100 Mobile L411" printer if that printer hasn't connected to that computer before. If the printer has been connected before, a new printer is not created.
Many users have multiple copies of printers all with the same printer name "HP Officejet 100 Mobile L411". The printer that is connected is highlighted; all other printers are grayed out.
My users want to know which printers they've checked out before when they pick up a printer. The users can rename the printers manually but most don't want to do that. I can rename them for the users, but that's a lot of users and a lot of printers. Either way, the next time they get a printer they haven't used before they'll get the default name.
I'd like to know if there is a way to set the printer's firmware to create a unique name when the printer is created by using the serial number or another designation I could enter.
For example, I'd like to have "HP Officejet 100 #MY1555AAQQ" or "HP OfficeJet 100 Purple #12" show up as the printer name. Is there any way to do that?

Our requirement is...
Yep, had this requirement as well.
All these various user name collisions and worse is different IDs for the same person can be solved relatively easily by IdM.
But best practice is still to remove the collisions and use unique IDs. Same goes for deleting users (dont do it).
Good luck.
Cheers,
Julius

Uniquifyforuser failed to get unique name size, code 1355

Just installed v11.1.1.1 on Windows XP SP2.
When I launch Excel, I get:
uniquifyforuser failed to get unique name size, code 1355
When I launch Visual Explorer, I get the same thing.
Any clues?
Thanks!

What should the ARBORPATH be? I am getting the same message, and the excel add in continues to fail. I know it is registered, but are the files in the wrong location? Where should the files be installed or copied?
My workstation arborpath is labeled: C:\Hyperion\products\Essbase\EssbaseClient
The .dll files are in the following location: C:\Hyperion\products\Essbase\EssbaseClient\api\redist
Should the workstation arborpath point to the api\redist ?
thank you in advance.
peg
Edited by: user1733663 on May 7, 2009 7:25 AM
Upon further investigation, the Oracle Essbase Release 11.1.1.2 indicates the "known problem" and fixes it with this release.
http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/esb_11112_readme.html
Edited by: user1733663 on May 8, 2009 8:28 AM

IDispatch error #19876 - LDAP Authentication Source - User Unique Name Attribute

Hi,
we have troubles with the User Unique Name Attribute:
As 'cn' and 'dn' may change we want to use the EmployeeID ('workforceID') as unique identifier for our user synchronisation. This attribute exists and is also imported in the profile service. But when we add 'workforceID' to the 'User Unique Name Attribute' in the LDAP Settings of the Remote Authentication Source (LDAP AWS) the job fails and throws the error at the end of this message in the history log.
When we remove 'workforceID' everything works fine. If we set the user unique name attribute to 'cn' or 'dn' everything works fine, too. If we enter not existing names the same error is thrown. It seems like 'workforceID' could not be read/found? What are we doing wrong? Thanks in advance.
1/17/06 12:37:01- (34432) CPTSyncAgent::ProcessUsers: Call to retrieve the users on this auth source failed. Please check that the authentication source server is online.
*** COM exception was: IDispatch error #19876 (0x80044fa4): [SOAP fault: faultcode='ns1:Server.userException' faultstring='java.rmi.RemoteException: Unknown error occured in internalGetUsers null
com.plumtree.remote.ServiceException: Unknown error occured in internalGetUsers nullat com.plumtree.ldap.aws.LDAPSyncProvider.internalGetUsers(LDAPSyncProvider.java:671)at com.plumtree.ldap.aws.LDAPSyncProvider.getUsers(LDAPSyncProvider.java:504)at com.plumtree.remote.auth.NativeSyncProvider.GetUsers(Unknown Source)at com.plumtree.remote.auth.xp.XPSyncProvider.GetUsers(Unknown Source)at com.plumtree.remote.auth.soap.SyncProviderSoapBindingImpl.GetUsers(Unknown Source)at com.plumtree.remote.auth.soap.SyncProviderSoapBindingSkeleton.GetUsers(Unknown Source)at sun.reflect.GeneratedMethodAccessor1024.invoke(Unknown Source)at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)at java.lang.reflect.Method.invoke(Method.java:324)at org.apache.axis.providers.java.RPCProvider.invokeMethod(RPCProvider.java:372)at org.apache.axis.providers.java.RPCProvider.processMessage(RPCProvider.java:292)at org.apache.axis.providers.java.JavaProvider.invoke(JavaProvider.java:276)at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71)at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:156)at org.apache.axis.SimpleChain.invoke(SimpleChain.java:126)at org.apache.axis.handlers.soap.SOAPService.invoke(SOAPService.java:437)at org.apache.axis.server.AxisServer.invoke(AxisServer.java:316)at org.apache.axis.transport.http.AxisServlet.doPost(AxisServlet.java:701)at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)at org.apache.axis.transport.http.AxisServletBase.service(AxisServletBase.java:335)at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:256)at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2422)at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:171)at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:163)at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:641)at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)at org.apache.catalina.core.StandardPipeline$StandardPipelineValveContext.invokeNext(StandardPipeline.java:643)at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:480)at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:995)at org.apache.coyote.tomcat4.CoyoteAdapter.service(CoyoteAdapter.java:199)at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:833)at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:711)at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:584)at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:687)at java.lang.Thread.run(Thread.java:536)']
1/17/06 12:37:01- (34432) *** Job Operation #1 failed: ProcessUsers failed (0x4)

That's the correct place to look for the version.
My guess at what is happening is that some of users do not have the 'workforceID' attribute and that is causing the AWS to fail when it gets to them. Unfortunately there is not great error logging around this in the 2.0 version of the LDAP AWS. In order to find out if this is indeed the case, and to see what user does not have this attribute, do a trial run with workforceID as the User Login Attribute. This case is caught and reported better.

NetBoot unique names

Similar Messages

Maybe you are looking for