Netcfg will not setup static IP with media disconnected

The title says it all.  If I don't physically have my network cable plugged in, setting a network profile with a static IP fails.  Also, there doesn't appear to be a setting for subnet mask.
Please help, without this functionality I'm stuck back using Windows with netsh scripts, which I'm really trying to get away from.

Ok, it's not as bad as I thought.  At least once you have the static set, if the media is temporarily disconnected, it does't drop the static setup like networkmanager does.  I think I can live with this setup, although it would be nice if you could set the static ignoring the carrier signal.

Similar Messages

  • Touch id will not setup on iphone5s with new ios 8

    I have just upgraded from ios 7 to ios 8
    My touch ID will no longer work and I cannot add a fingerprint - it immediately flicks to a screen stating it cannot complete

    the same problem

  • TS1717 i recently downloaded two tracks from itunes: they will not play in my windows media center even though i have added them to that location. any idea what other trouble shooting i can attempt on this issue??

    i recently downloaded two tracks from itunes and they will not play in my windows media center. i have never had this problem but the two tracks play on my PC just not in the windows media center and usually all my itunes music plays in there no problem??? any idea what to do? thanks

    I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
    The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

  • I want to sync my Voice Memos but iTunes 10.5 will not let me even with the "include voice memos" checkbox selected.

    I want to sync my Voice Memos but iTunes 10.5 will not let me even with the "include voice memos" checkbox selected. As well Ive deselected all the music in itunes so when I sync there will be none on my phone but itunes also ignores this request and puts purchased music back on. I do not have autofill selected. Also wondering where the backup of my iphone 4s is located on my hard disk. Any help greatly appreciated.

    Sorry thats itunes 11.5

  • Email will not setup "Do you want to try setting up the account without SSL"

    email will not setup, get  message  "Do you want to try setting up the account without SSL"

    Is that a question? hard to tell
    How about some info
    What email (yahoo? gmail? compuserve?)
    On what (the ipad? vista?)
    Did you do anything in response to the question other than post here?

  • Itunes 11.1.5 will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Itunes 11.1.5 (MacBook Pro,OS 10.6.8) will not sync new apps with iPhone 5 iOS 7.0.6 and gives grayed out "install" no message?  How does one work around this?

    Just reboot your laptop... While its rebooting try to reboot your phone also by holding the home and power buttonn for 10-15 seconds...When your phone is turned off try to connect it to iTunes and it will recognize your phone in recovery mode.
    If you have the .ipsw file for iOS 7.0.6 saved in your desktop then in itunes press shift and click on Restore.
    Select the ipsw file and let it restore.
    If you dont have it downloaded then simply click on restore.
    I hope it works
    Cheers !

  • Imac will not boot up, chimes with apple logo and beach ball spin??

    imac will not boot up, chimes with apple logo and beach ball spin?? after installing adobe flash and up graded apple softeware

    If your iMac came with or is running Lion, startup holding either  the Command-R keys or the Option key and select the recovery partition and then use Disk Utility to repair the Macintosh HD.
    see > OS X Lion: About Lion Recovery
    If your running Snow Leopard or earlier OS X, pop in your Install DVD and startup holding either the Option or C key, then open and use Disk Utility to repair the Macintosh HD.
    see > Mac OS X - Using Disk Utility to Repair a Disk

  • Hello, my iphoto on my mac OS X Version 10.5.8 will not launch after talking with an apple support tech.  She had me sinc my iphone to my mac desktop and my photos downloaded from my iphone and were at the bottom.  Now the iphoto will not launch.

    My iphoto app will not launch after talking with an apple tech support who had me sync my iphone 4S with my mac desktop.  The pictures downloaded from my iphone and after disconnecting from the Apple help, my iphoto had disappeared from the very bottom of the screen and will not launch.  Can you help me retrieve my pictures.  They are still on the computer.

    Any help here:
    http://support.apple.com/kb/HT2638?viewlocale=en_US&locale=en_US

  • CS2 will not open. Greeted with "Your Adobe Photoshop user name...

    CS2 will not open. Greeted with message "Your Adobe Photoshop user name, organization, or serial number is missing or invalid. The application cannot continue and must now exit." I click OK and PS closes. I've been using this regestered copy on this PC (running Vista 32) for years (daily or at least weekly) without problem until today. Any ideas on how I can get it working again? I have disc somewhere? Thank you.

    Unfortunately your cs2 disc is no good except for the things such as the goodies or extras that came on the cd, because adobe disabled the activation servers for cs2 products.
    You can try this:
    (in other words something removed the info from the windows registry)
    http://web.archive.org/web/20120325044452/http://helpx.adobe.com/photoshop/kb/error-user-n ame-organization-or.html
    More than likely though, you'll have reinstall photoshop cs2 using the new non activating installer.
    Use just the photoshop cs2 download and serial on that page.
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • I recently updated iTunes to version 11.5.5, and now my iPhone 5 will not sync up completely with iTunes.

    I recently updated iTunes to version 11.5.5, and now my iPhone 5 will not sync up completely with iTunes. ITunes will recognize and sync up, but I now cannot manage my music on my phone. Also, all of my playlists on my iPhone were wiped out.  It would be great to retrieve my phone playlists, but more important, be able to manage my music again.  I'm running on Windows 7 and I own iPhone 5.  Suggestions?

    I have windows 8, I'm not sure if that has anything to do with anything, but i figured maybe 11.1.4 just doesn't like 8. soooo.. i went onto my computer settings and uninstalled anything and everything made my apple and then reinstalled itunes 11.1.3 and it now reads my ipod nano happy day thanks apple for making something that you can't help me with at all

  • Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

    Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

    Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
    I took a very quick look at the app, so I may be a missing something about its capability.

  • IBooks will not sync PDF collections with my IPhone. It syncs the collection title but not the content?

    My IBooks will not sync PDF content with my IPhone. It syncs the collection title but no content. Both devices are set to sync collections? Any ideas how to fix this?

    The 'sync collections' setting does not copy books or PDFs between devices - all it does is if you have the book on both devices and you move it into a collection on one of them, then it will be put into the same collection on the other device.
    You will need to sync each PDF that you want on your phone. If you don't currently have them on your computer then connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over (that should copy PDFs and/or epubs that are in the iBooks app, not just actual ibooks), and if using a Mac with Mavericks on it do File > Move Books From iTunes in the iBooks app on it, and you can then sync them to your iPhone.

  • My macbook pro 2.0 early 2011 will not go to sleep with the power source connected. only enters sleep mode when running on battery. Someone did this happen, and it could solve?

    Alo, my Macbook pro i7 2 GHz Intel Core i7 (early 2011) will not go to sleep with the power source connected. only enters sleep mode when running on battery. Someone did this happen, and it could solve?

    There is no output from that command line?   Maybe the pid changed.
    I'll repeat what I am trying to find out...
    1. You do a pmset -g on the terminal.
    2. The output from that pmset should have a line that says "sleep 0 (imposed by n)" where n is some number.
    3. The ps ax | grep n is supposed to display what the process associated with n is.
    It's the output from step 3 that should indicate what is causing you not to sleep.
    But speaking of sleep, that's where I am going.

  • My iphone5 will not sync my contacts with my icloud account

    my iphone5 will not sync my contacts with my icloud account  I am signed in with the same login and password

    Did you request to sync your contacts from the iPhone?

  • Flash cs3 "Motion tweening will not occur on layers with ungrouped..."

    I am getting the error message: flash cs3 "Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol"
    I have only one symbol in the layer, a graphic.
    Does anyone know how I can correct the "problem"?
    Thanks in advance.
    karen.

    as the above poster mentioned I am guessing you have more than one object on that layer. you may have created a symbol from a shape and not selected the stroke.. that is pretty common.
    to verify what is on a particular keyframe do a "select all" cntrl-a or cmd-a. maybe you will see more than one item selected.
    look at the properties panel. if you have only one thing it will note the symbol or it will say "mixed".
    perform this test in the first and last keyframe.

Maybe you are looking for