NetConfig vs Device Selector/Task Selector

Hi,
I just updated my 3.2 with the latest RME package: rme4_3_1_win
After doing so, now when trying to run a "Device Based" NetConfig job I get the "Task Selector" information in the "Device Selector" window.
Any ideas?
I attached picture which shows the problem.

I haven't seen that before. This could be due to some bad cached compiled JSP files. Shutdown Daemon Manager, then delete all files and directories under NMSROOT/MDC/tomcat/work/Standalone/localhost. Then restart Daemon Manager, and see if that fixes it.
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com

Similar Messages

Not able to select "all devices" in device selector

I am having a problem selecting "all devices" in device selector in most cases in lms4.1. When selecting "all devices" it show up zero. Instead i have to choose "device type groups" and this takes about half a minute to show up. In some cases I am able to select it, but in most cases I am not. For instance :
Reports > Inventory > Management Status>Credential Verification Errors

Hi
The problem is now solved. But I had to do alot of reinstalling of lms to fix this. In our case it seemed like there was some sort error when importing devices from file when upgrading to a new release of lms 4.1. and 4.2 which we are now running.
I also had the same assumptions as you when it came to the domain. And this was also the reply I got from TAC.
To solve this I had to first delete all devices from the new lms installation that had some sort of fail under "inventory -> device status" Either not supported, faulty backup og not able to collect inventory. Then I did a export devices under "add/import/manage devices". Then I returned to a previous snapshot of the server from before I imported the devices the first time and then imported the devices that are 100% compatible again.
Now i am manually adding the devices that where first deleted.
In our case it might have been sufficient to just delete the devices with faults, but I cannot confirm this.
Now I have not seen this issue for 4 days, and earlier I had to restart the server every day. So I am very hopeful
This issue appeared when we first tried to upgrade from lms3.2 to lms4.1. And we used an import file of the devices instead of the backup from from lms. When we also tried to upgrade to 4.2 this issue still came back. We have installed lms4.2 on a standalone server with VMware and the linux versjon.

No matter what, I cant get the Device Selector to become active in Netbeans

This is totally frustrating. For the life of me, I cannot get the Device Selector to work
On my Development machine
I've installed all the prerequisites for Java ME SDK 3.3 EA (Early Access) using Raspberry Pi.
Windows 7,
Netbeans 7.3 full bundle with support for ME
Jave ME SDK 3.3 preview
The device address manager is set up
the nb-me-sdk-plugins-uc plugins have all been installed
the j2me platform has been installed under the "Java Platform Manager"
the customer device editor has been set up to simulate my raspberry pi exactly as in the video below
under Installed Plugins, Java ME is active
On my Raspberry Pi
Java ME 3.3 is on my Raspberry Pi
I can run the testuser.sh program
I'm trying to follow along on the Oracle video by Simon Ritter
http://www.youtube.com/watch?v=nA7AMuTK9sE&feature=youtu.be
No matter what I do, I cannot get Tools->Java ME->Device Selector
or Tools->Java ME->Active Device Manager to become active.
I've spent the better part of the day trying to figure this out, and I've had no luck. What am I missing?
Vinnie
Edited by: vdipren on May 25, 2013 7:27 PM

Hello Alexander,
I also tried to install netbeans and Java Me, and got stuck on the same problem as Vinnie: the menu item `Device Selector` is grayed besides most other items in the same menu.
The grayed menu items in menu Netbeans/Tools/Java ME are:
          WMA Console,
          Java ME SDK Update Center,
          Custom Device Skin Creator
          Active Device Manager
The only one that is not grayed is: 'Device Database Search'.
I made sure the device_manager is running. You asked Vinnie to run emulator.exe from the commandline. I did and it outputs the help instructions.
I like to provide you with the log files, but how to do that? They are quite big! Dou you want me to paste the contens of the files in here?
Thanks for giving it your time.
Jan

LMS3.2/Campus5.2.1/UT: device selector empty when generate reports

Hi,
Customer has LMS 3.2 on windows. He has an issue on UT when he wants to generete a report, device selector is empty.
User Tracking -> Reports -> Report Generator:
      * Application : Switch Port Report
      * Report : Reclaim Unused Down
He has the same issue (device selector empty) with :
- Campus Manager >> Configuration >> VLAN Configuration
- Campus Manager >> Reports >> Report Generator >> Switch Port Report + Switch Port Summary
- Campus Manager >> Visualization >> RMON Configuration
I didn't find bug in BugID Lookup Tool.
Which logs could give me information for this issue ?
Many thanks

This sounds like a problem with Object Grouping Services where Campus OGS is not able to communicate with CMF OGS.
The shortest solution might be to just restart LMS, wait 15 minutes and then check again.
If that does not help,
1) Enable OGS debugging for both Campus and CMF
NMSROOT = C:\progra~1\CSCOpx or /opt/CSCOpx (unix)
NMSROOT/MDC/tomcat/webapps/cwhp/WEB-INF/classes/log4j-ogs.properties
NMSROOT/MDC/tomcat/webapps/campus/WEB-INF/classes/log4j-ogs.properties
Change ALL instances of FATAL, ERROR, WARN, and INFO to DEBUG.
(might want to back these files up first, you will want to change them back when finished)
2) Restart LMS (wait 5 mins betweens stop/start)
windows
> net stop crmdmgtd
> net start crmdmgtd
unix
# /etc/init.d/dmgtd stop
# /etc/init.d/dmgtd start
3) Reproduce the problem
4) Collect Log files in
C:\progra~1\CSCOpx\log or /var/adm/CSCOpx/log (unix)
CampusOGSClient.log
CampusOGSServer.log
CMFOGSClient.log
CMFOGSServer.log
5) Open a case with TAC
Good luck
Tom

How to make a device selector control?

Hello all,
Some months ago I saw a simple control that allowed me to select device/channel, but now I just cannot find it (either in Google or in CVI).
Right now I am using DAQmxGetSystemInfoAttribute() and DAQmxGetDeviceAttribute() functions to query the available channels.
Thanks for the help in advance!
Yours,
Adrian
Solved!
Go to Solution.

This KnowledgeBase entry can help you in configuring the controls.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Device Fails Task Sequence at the Windows Setup Unattend Step, but No Unattend.xml is Specified

This is the first During the task so the only unattend.xml When looking at Here is the end 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Error 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Error 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Warning 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:21:07, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info 2015-03-10 16:22:18, Info The error code 0x8030000b Can anyone offer time i have encountered a laptop straight from OEM with two physical SATA disks (Disk 0 = 256gb SSD, disk 1 = 750GB HDD). [this might not be relevant, but as all other machines are working fine with this TS+WIM, i will mention it.]
sequence, after the WIM is applied and the device reboots, the Windows setup fails and displays a general Unattend error (stating the specialized pass has failed) There is no unattend.xml specified in the apply operating system image step,
is the one generated by the task sequence.
the C:\Windows\Panther\Unattend\Unattend.xml everything seems OK to me.
of the setupact.log
[setup.exe] [Action Queue] : Command Line = C:\WINDOWS\SYSTEM32\RUNDLL32.EXE / arguments = shsetup.dll,SHUnattendedSetup / pass = specialize / manifest path = C:\WINDOWS\Winsxs\Manifests\amd64_microsoft-windows-shell-setup_31bf3856ad364e35_6.1.7601.17514_none_3080d81b003fb8dd.manifest
[setup.exe] [Action Queue] : Command Line = C:\WINDOWS\SYSTEM32\DJOIN.EXE / arguments = / pass = specialize / manifest path = C:\WINDOWS\Winsxs\Manifests\amd64_microsoft-windows-unattendedjoin_31bf3856ad364e35_6.1.7601.17514_none_113aea0e8374286d.manifest
[setup.exe] [Action Queue] : Command Line = C:\WINDOWS\SYSTEM32\SETUPUGC.EXE / arguments = / pass = specialize / manifest path = C:\WINDOWS\Winsxs\Manifests\amd64_microsoft-windows-deployment_31bf3856ad364e35_6.1.7600.16385_none_57e3e87206ff08ca.manifest
[setup.exe] [Action Queue] : Executing command "C:\WINDOWS\SYSTEM32\RUNDLL32.EXE" shsetup.dll,SHUnattendedSetup specialize
[setup.exe] [Action Queue] : process exit code = 4
[setup.exe] [Action Queue] : Unattend action failed with exit code 4
[setup.exe] [Action Queue] : ProcessActionQueue finish (hr = 0x1f2000)
[setup.exe] Execution of unattend GCs failed; hr = 0x0; pResults->hrResult = 0x8030000b
[0x0606cc] IBS Flushing registry to disk...
[0x0606cc] IBS Flush took 46 ms.
IBS Callback_Unattend_InitiatePass: Runtime error occurred while applying unattend answer file; hrResult = 0x8030000b
IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
IBS UnattendDumpSetting: ------Unattend setting error / warning------
IBS UnattendDumpSetting: Error code = 0x8030000b
IBS UnattendDumpSetting: Pass = specialize
IBS UnattendDumpSetting: Component name = [Microsoft-Windows-Shell-Setup]
IBS UnattendDumpSetting: --------------------------------------------
IBS UnattendErrorFromResults: Error text = Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup].
IBSLIB PublishCriticalError: Publishing critical error message [Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup].]
[0x070042] DIAG CallBack_DiagnosticDataSend: Called with notification for Error published by ErrorHandler
DIAG CallBack_DiagnosticDataSend: Setup was started from Phase 4. Disabling Diagnostics [DiagnosticDataSend] in this scenario
[0x090095] PANTHR WdsExitImmediate called! Execution will stop, and the queue won't be saved.
[0x09008c] PANTHR SeqExecute -- stopping, since WdsExitImmediate() was called
[0x090086] PANTHR pWorkerThreadFunc -- Stopping
[0x090086] PANTHR pWorkerThreadFunc -- Stopping
[0x090086] PANTHR pWorkerThreadFunc -- Stopping
PANTHR DeleteCriticalSection for pExecQueue->csLock;
[0x0605a6] IBS Requested UI to hide the language and locale selection pages.
[0x090081] PANTHR Destroying any unreferenced modules! (SEQ6)
[0x0601d7] IBS InstallWindows:Error Type = 3211266
[0x090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.
is not recognised by cmtrace
any ideas as to the cause of this?

Here is the latest failure, i think it is still identical:
2015-03-18 15:19:48, Info [setup.exe] [Action Queue] : Executing command "C:\WINDOWS\SYSTEM32\RUNDLL32.EXE" shsetup.dll,SHUnattendedSetup specialize
2015-03-18 15:19:48, Info [setup.exe] [Action Queue] : process exit code = 4
2015-03-18 15:19:48, Error [setup.exe] [Action Queue] : Unattend action failed with exit code 4
2015-03-18 15:19:48, Info [setup.exe] [Action Queue] : ProcessActionQueue finish (hr = 0x1f2000)
2015-03-18 15:19:48, Error [setup.exe] Execution of unattend GCs failed; hr = 0x0; pResults->hrResult = 0x8030000b
2015-03-18 15:19:48, Info [0x0606cc] IBS Flushing registry to disk...
2015-03-18 15:19:48, Info [0x0606cc] IBS Flush took 110 ms.
2015-03-18 15:19:48, Warning IBS Callback_Unattend_InitiatePass: Runtime error occurred while applying unattend answer file; hrResult = 0x8030000b
2015-03-18 15:19:48, Info IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: ------Unattend setting error / warning------
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: Error code = 0x8030000b
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: Pass = specialize
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: Component name = [Microsoft-Windows-Shell-Setup]
2015-03-18 15:19:48, Info IBS UnattendDumpSetting: --------------------------------------------
2015-03-18 15:19:48, Info IBS UnattendErrorFromResults: Error text = Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup].
2015-03-18 15:19:48, Info IBSLIB PublishCriticalError: Publishing critical error message [Windows could not parse or process the unattend answer file for pass [specialize]. The settings specified in the answer file cannot be applied. The error was detected while processing settings for component [Microsoft-Windows-Shell-Setup].]
2015-03-18 15:55:52, Info [0x070042] DIAG CallBack_DiagnosticDataSend: Called with notification for Error published by ErrorHandler
2015-03-18 15:55:52, Info DIAG CallBack_DiagnosticDataSend: Setup was started from Phase 4. Disabling Diagnostics [DiagnosticDataSend] in this scenario
2015-03-18 15:55:52, Info [0x090095] PANTHR WdsExitImmediate called! Execution will stop, and the queue won't be saved.
2015-03-18 15:55:52, Info [0x09008c] PANTHR SeqExecute -- stopping, since WdsExitImmediate() was called
2015-03-18 15:55:52, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2015-03-18 15:55:52, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2015-03-18 15:55:52, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2015-03-18 15:55:52, Info PANTHR DeleteCriticalSection for pExecQueue->csLock;
2015-03-18 15:55:52, Info [0x0605a6] IBS Requested UI to hide the language and locale selection pages.
2015-03-18 15:55:52, Info [0x090081] PANTHR Destroying any unreferenced modules! (SEQ6)
2015-03-18 15:55:52, Info [0x0601d7] IBS InstallWindows:Error Type = 3211266
2015-03-18 15:55:52, Info [0x090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.

Task completed -- Adding device to CSM

Hi Everyone,
i was able to add the asa to csm 4.3 by add device from network.
ASA is in production
After https connection was successfull it asked me to create ticket for that step
i created ticket need to know why this ticket creation is necessary?
also after that i started to discover the device and it added the device with warnings.
And below is tab that shows
generate report
Need to know should i clickon generate report?
Last small window i have is task completed.
It says for security contexts to appear in device selector you must submit the current activity.
Do you want to submit the current activity now.
it has option yes or no
Should i click on yes?
Need to know if i do all the steps above will it cause any config change on ASA?
Thanks

Ticketing is used primarily in multi-user environments to allow different users to keep track of one another's work. It can also optionally interface with an external ticket system like Remedy or Service Now.
For instance, if one user has started work on an ASA configuration and plans to implement it at a later time, the ticket will show subsequent users that the configuration is, in effect, "checked out".
For single user or very small shops, ticketing (and workflow) is not commonly required.

LMS3.2.1 - defect OGS in NetConfig

Hello,
After upgrading to LMS3.2.1 I cant select devices in Netconfig. There seams to be a defect in the selection box:
you have Task selection twice (left task-selector headlined with Device Selector) instead of device-selector left and task-select right.
What can we do to can use netConfig? Plaese see screenshot to beleave:)
Steffen

After playing Patch: LMS321-win-CSCtr77570-0 both sites was shown as Device-slector and task-selector disappeared.
After reboot the whole LMs server everything works fine.

Set firefox sound to new default sound device - quirky behavior windows 8

My 64bit Win8 machine will direct sound to the default speakers as output but when I try to toggle the sound to a different devices such as e.g. 'headphones' the sound goes out. I am using the notification icons area on my PC to switch the sound output device which works acceptably in other browsers.
The exception I've noticed at least once on a TED talk video was if the sound/movie clip was loaded from the URL directly instead of as embedded in a webpage, the sound device selector native to the OS works fine.

I think that you need to close and restart Firefox after making changes to the default sound device to make Firefox pick up the change. Otherwise it might not work properly, especially when a built-in (HTML5) media player is used and not a plugin.

HOWTO: Fix beta 7 SDK provisioning/device errors.

Okay, through trial and error, I have determined:
1) Provisioning profiles have to be regenerated; ones generated yesterday or this morning are corrupted.
2) Apparently, your app ID must now be only three dot-levels deep. I.e., if you have 'com.mycompany.foo' on Mac OS X, you cannot name your app ID 'com.mycompany.foo.mobile' -- you will need to do 'com.mycompany.mobilefoo' or whatever. (This was the one that got me, and took me quite a while to figure out.)
3) Your app ID and the bundle ID in the target properties of Xcode must be identical, to the character. So if you have 'com.mycompany.*' as an app ID, you will need to set the bundle ID to 'com.mycompany.*' rather than 'com.mycompany.mobilefoo'
4) You will need to go re-select the code signing profile in Xcode before rebuilding for devices under beta 7.
5) You MAY (I didn't, but others did) have to change your code signing identity to be just 'iPhone Developer' instead of 'iPhone Developer: Firstname Lastname'
Hopefully this helps folks!
Message was edited by: RainPacket

jamois
Maybe I can help if you are still stuck. I figured it out with your help, so maybe I can help a bit.
I first grabbed my new provisioning information about about 8pm on the10th, so maybe I got good provisioning files. My provisioning identifier is 4 long xxxx.com.myco.myapp but following other's advice on this chain. Here is all I had to do:
1) I entered com.myco.myapp into my plist bundle identifer
2) In the Build configuration of the Project Info, I
a) Used my name in the Code Signing Identity field. I used the same name as I was told to use in the provisioning Certificates:
http://developer.apple.com/iphone/manage/certificates/team/index.action
b) I selected the proper provisioning profile from the Code Signing Provisioning Profile selector field.
c) That automatically selected the same profile in the Any iPhone Device selector field.
I compiled and it ran.
I figured out the last steps by reviewing this information:
http://developer.apple.com/iphone/manage/overview/development.action
Hope this helps
Joe
www.softwareops.com

Error -200587 occurred at DAQmx Start Task.vi:7

I am running the attached code Merrit_Coil_calibration, and I get the following error:
Error -200587 occurred at DAQmx Start Task.vi:7
Possible reason(s):
Requested operation could not be performed, because the specified digital lines are either reserved or the device is not present in NI-DAQmx.
It is possible that these lines are reserved by another task, the device is being used through the Traditional NI-DAQ interface, or the device is being reset. You might also get the error if the specified resource is currently in use by LabVIEW network variables bound to the DAQ Channel, or if the DAQ Channel is being used in any OPC Client software.
If you are using these lines with another task, wait for the task to complete. If you are using the device through the Traditional NI-DAQ interface, and you want to use it with NI-DAQmx, reset (initialize) the device using the Traditional NI-DAQ interface. If you are resetting the device, wait for the reset to finish.
Device: Dev2
Task Name: _unnamedTask<F>
I am calling the same DAQ, many different places in my code and I think that is the problem, but I can not figure out why or hw to fix it. Anyone have any suggestions?
Attachments:
Final.zip ‏2434 KB

Thank you both for your input. I slightly changed my code to Merritt_Coil_calibration (updated code attached) and the first error went away, but now I have a different one which is:
Error -200429 occurred at DAQmx Write (Digital U32 1Chan 1Samp).vi:1
Possible reason(s):
Value passed to the Task/Channels In control is an empty string (or I/O control).
The value must refer to a valid task or valid channels.
As far as what DAQ device I am using, it is the NI USB 6009. I am only using digital port 0. During different pieces of my code I send different values to port 0. I am using this to drive some stepper motors. I thus send square waves on the different pins on port 0. I do not know if this is exactly what you were asking.
Whatever the case, I was wondering if anyone knows why this error occurs and how I could fix it.
thanks.
Attachments:
honorsproject.zip ‏256 KB

Network Drives under "Devices"

I have some mounted resources with SMB protocol.
At startup sometimes it shows up under devices in finder sidebar, sometimes not.
I cannot drag resources manually, because it disappear as i release mouse button.
Note that they are folders under the same network resources. Some shows, some not.
Thnks

I'm still having this problem and hopefully someone else will read this thread and have a solution. Just a brief summary - When I go to "Add a Device" under "Tasks", the search will find both my iPad2 and Galaxy Tab 10.1 tablet. It even identifies them correctly by type of device. However, neither ever shows up in the Network Map.

LMS 4.2.3 Device pack update

Hi
Im trying to update the device pack for LMS 4.2.3, since the existing pack doesnt include 3850s. I went to Device update -> clicked inventory config and image management -> check for updates. It gives me the following error:
A PSU Task is currently been executed by another user.Only one PSU Task can be executed at a time.Please wait for the current Task to complete. The details of the currently running PSU Task are as below:
PSU Task :
Device Updates
Task Started at:
Wed Mar 05 14:16:09 EST 2014
Task Started by:
admin
NOTE : If you are sure no other download is happening , please delete the file D:\CISCOW~1\Psu.Lock
If im doing the manual way, I went to CCO and downloaded this file:
Inventory Config and Image Management Device Package version 2.12.9 for SharedSwimIOS Over LMS 4.2.3
SharedSwimIOS.RME523.v2-12-9.zip
but there is no documentation on how to manually install this ? can someone help me solve this please ?
Raj

What is the exact model of 3850 switch you're trying to monitor?
Following are the supported models :
Device Name
sysObjectID
Supported Software Version
Support Type
Device Name
sysObjectID
Supported Software Version
Support Type
Cisco Catalyst 3850-48P-E Switch
1.3.6.1.4.1.9.1.1641
Device Update
Cisco Catalyst 3850-48P-S Switch
1.3.6.1.4.1.9.1.1643
Device Update
Cisco Catalyst 3850-24P-E Switch
1.3.6.1.4.1.9.1.1642
Device Update
Cisco Catalyst 3850-24P-S Switch
1.3.6.1.4.1.9.1.1644
Device Update
Cisco Catalyst 3850-24U-E Switch
1.3.6.1.4.1.9.1.1767
03.11.35.EMP
Device Update
Cisco Catalyst 3850-48U-E Switch
1.3.6.1.4.1.9.1.1768
03.11.35.EMP
Device Update
If it is 3850-24p-L, it can be :
CSCuj61704 No support for 3850-24p-L in LMS 4.2.3
Try updating your mdf device package as well. Device package for Common Services.
For current Nexus device package issue, each device package is not individual, but has some dependant packages. Without which they are tend to fail during installation check.
You can select all the available device packages and try to install. It seems you dont have SharedDcmaIOS (3.1.7) installed and hence the package is failng due to pre-requisite.
You have to install each package which fails which consistancy check on other packages.
For mdf package update, you can select common service as well and check for update.
There may be some 3850 device packages already available, please share output of following command for us to see :
NMSROOT/bin/psucli -p rme -q -all
-Thanks
Vinod
**Rating Encourages contributors, and its really free. **

NetConfig Jobs pause before sending next command

Is there a way to pause sending the second command until the first command completes in a NetConfig Jobs User-defined task? I'm trying to get the following commands to send but it fails on the second command due to lack of response:
delete /force /recursive flash1:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash2:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash3:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash4:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash5:c3750-ipbasek9-mz.122-55.SE1
delete /force /recursive flash6:c3750-ipbasek9-mz.122-55.SE1
copy tftp://139.78.103.93/IOS/3750/c3750-ipbasek9-mz.122-55.SE5.bin flash1:
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash2:/c3750-ipbasek9-mz.122-55.SE5.bin
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash3:/c3750-ipbasek9-mz.122-55.SE5.bin
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash4:/c3750-ipbasek9-mz.122-55.SE5.bin
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash5:/c3750-ipbasek9-mz.122-55.SE5.bin
copy flash1:/c3750-ipbasek9-mz.122-55.SE5.bin flash6:/c3750-ipbasek9-mz.122-55.SE5.bin
configure terminal
boot system switch all flash:/c3750-ipbasek9-mz.122-55.SE5.bin
exit
write memory
reload

I would generally use a state machine because you will want your user to be able to abort in the middle of the delay. You can use use the time of day (in seconds) and check this at some periodic basis. You dont' want to poll so quickly that you consume all of the CPU cycles and you don't want to delay too long so you can still respond quickly to user requests such as aborting the application.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Radio Switch Device

What is the purpose of the Radio Switch Device?
I found it under "Human Interface Devices" in Task Manager, after installing the drivers from MSI's website.
From googling it seems like it's something to do with wireless connections, but we already have the Wireless Network Adapter so I'm confused.

Quote from: santathe1 on 24-November-14, 16:45:18
Radio switch enables fn key combinations, perhaps?
Toggle Wifi On/Off: Fn + F8
Toggle Bluetooth On/Off: Fn + F9
not all MSI laptops have
Toggle Wifi On/Off: Fn + F8
Toggle Bluetooth On/Off: Fn + F9
as hotkeys like GS70 only have a button with airplane icon on F10 so doing FN + F10 disables both wifi and bluetooth.

NetConfig vs Device Selector/Task Selector

Similar Messages

Maybe you are looking for