NetConnection.Connect.Closed

Hi,
I have an application running via FMIS (dev version) that has
been working just fine until today. Now I see that once the net
connection fails, every status check shows that the net connection
is closed. The only spot in the AS3 code which can close the
NetConnection object explicitly is a single function called from
about a half dozen other functions - none of which are being
executed when I step through the code.
So my problem is why is it that all of a sudden, after months
of working just fine, would the net connection object just stop
connecting and working? The weird thing is that I'm seeing a client
connection in the FMS admin interface for the application, so there
is some communication going on...but locally the status of the net
connection keeps being read as closed.
I'm afraid to update anything with the live app as long as my
local app is behaving this way. The only change that I've made
systemically was to apply a Windows update this morning and install
a malicious software tool...and I did download and install a trial
version of Captivate two days ago, which could have been after the
last local successful use of the application. If anyone has any
ideas on what I can look at to figure out this problem I'd really
appreciate it.
Regards,
Dave Spaar

Would you have another computer where you could install FMS
and the application and see if it starts working again? It could be
related to the "malicious software tool". I know when I installed
anti-virus, FMS had a very strange reaction... if I remember, it
just stopped accepting connections, but it was so long ago, I don't
remember exactly.
Did you make any other changes in the client? Like upgrading
the language version you are using on the client? Is it a flex or
flash client?

Similar Messages

  • NetConnection.Connect.Closed event not triggered in Vista FF3 when in fullscreen mode

    Hello Pals -
    I'm trying to handle the net connection drop and provide some kind of visual cue to user. For this I'm listening to NetConnection.Connect.Closed event and when its triggered, I take further steps. The events are triggered in Vista FF3(window mode)/IE7 but in Vista FF3 full screen mode, the event is not triggered. I forcefully disconnect the network cable to see the NetConnection.Connect.Closed event is triggered.
    I have following piece of code to listen to the event,
    nc = new NetConnection;
    nc.addEventListener(NetStatusEvent.NET_STATUS, onStatus, false, 0, true);
    nc.connect();
    public function onStatus(event:NetStatusEvent):void {
    trace("Status " + event.info.level + " : " + event.info.code);
    The function onStatus should be called whenever there is a status change in net connection. The events are not triggered in Vista FF3 full screen mode. Please share your views/ideas about this here. Thanks in advance. Please let me know incase more information is required.

    The problem decribed as above was caused by a fragile and eventually broken soldered connection on the curcuit board. My local dealer replaced the curcuit board and everything works fine again.
    I still wonder how that happend. I did not try to bend my MacBook and it did not fall of my desk.
    Thanks for reading.

  • FMLE Keeps disconnecting. It says "primary - Network Status: NetConnection.Connect.Closed" every 30 seconds? Why?

    I am trying to stream on Twitch. I am using Camtwist and FMLE.

    Hi
    I think i found the sollution or at least I hope i was able to stream for 5 min without any interruption. So here are my settings for the video option my incoming settings ( assuming you are using the blackmagic intensity to get the footage in) are Blackmagic HD 720p 59.94 -8bit ( that setting only works if you can set your output on the camera to 720, you still can record in full HD on my camera they are two indepnt settings. ) if you can not downsample the video to 720 you have to use Blackmagic HD 1080i 59.94 - 8bit. Your input size for the 720p setting can be almost everyhing in the 700 or lower range. for the 1080i i only can choose the 1920 setting. So I am using the 720p setting for format I use H.264 and here is what trickered the interruption the frame rate your frame rate needs to be at 59.94 and i also have my aspect ratio checked on blackmagic audio the settings can be anything and voila it worked not interruption
    hope that helps so even if you not use black magic see if you can get the frame rate settings all to the same

  • NetConnection.Connect.Rejected in FMS 2

    I want to create Audio/video chat application.
    I have FMS 2.0.4 and XAMMP 1.6 installed on my computer
    locally.
    i use the following code to test a connection to the FMS:
    conn = new NetConnection();
    conn.connect("rtmp:/localhost/my_app");
    conn.onStatus = function(info) {
    trace ("Level: "+info.level+" Code: "+info.code);
    but it seems it cannot establish a connection to the FMS
    server and
    returned the following errors:
    Level: error Code: NetConnection.Connect.Rejected
    Level: status Code: NetConnection.Connect.Closed
    tried these other codes too on the connect function:
    conn.connect("rtmp://localhost/my_app");
    conn.connect("rtmp://127.0.0.1/my_app");
    conn.connect("rtmp:/127.0.0.1/my_app");
    conn.connect("rtmp:/my_app");
    but still no luck.
    What seems to be the problem in my configuration?
    By the way, I tried to disable the XAMMP but stll it cannot
    establish a connection?
    Tried to run it in macromedia flash 8 using alt+enter and
    through the
    webserver using the publish html and swf files but still the
    same.
    Ive been working on this for days.
    Im desperate,i need to start working on the application
    already.
    Somebody please help..
    tnx..

    also be sure to check your log files (or you can go in
    through the admin console and view the server log).
    with this particular error, i personally had:
    "Asynchronous I/O operation failed (Failed to attach to
    completion port: The parameter is incorrect."
    if you do a search on this error you will find not so much
    information. i was able to get my application working using the
    rtmpt protocol, but now, after coming back to work and booting my
    machine, it's not working again and i have the same error.
    things i've tried:
    1) i shut down all anti-virus and firewall applications and
    services
    2) run netstat -a to see what is running and what ports are
    being used
    3) try specifying a different port for FMS to run on (default
    = 1935). this can be changed via $InstallDirectory$\conf\fms.ini
    (in windows). Inside the file search for ADAPTOR.HOSTPORT and
    change the value to whatever port you want to try.
    4) try variations of the url e.g. rtmp:/ rtmpt:/
    rtmpt://localhost rtmpt://localhost:1935 etc.
    5) make sure you don't have programs like netlimiter
    installed as this is a known app that can cause problems w/ FMS by
    intercepting system calls on the machine.
    If you do find something that works, please contribute to
    this thread as it could become valuable for others having these
    issues.

  • Getting NetConnection.Connect.Rejected

    I signed up with a FMS hosting service. They have a nice
    interface where I was able to install an application. I called it
    "simple", cause its bare bones simple. After installing, it gives
    me the rtmp connection string. Problem is - I get
    NetConnection.Connect.Rejected every time. I tried removing it, and
    installing again. But same thing.
    This is in frame 1. Is there something wrong with this?
    my_nc = new NetConnection();
    my_nc.onStatus = function (info) {
    switch(info.code)
    case "NetConnection.Connect.Success":
    textbox.text = "success" + "\n";
    break;
    case "NetConnection.Connect.Rejected":
    textbox.text = "rejected" + "\n";
    textbox.text += info.application.msg + "\n";
    textbox.text += "Event: " + info.code + "\n";
    textbox.text += "Type: " + info.level + "\n";
    textbox.text += "Message:" + info.description + "\n";
    break;
    case "NetConnection.Connect.Failed":
    textbox.text = "failed";
    break;
    case "NetConnection.Connect.Closed":
    textbox.text += "Connection closed.";
    break;
    my_nc.connect("rtmp://exx3333.rtmphost.com/simple");
    (I didn't put in the exact rtmp string in there, since this
    is a public forum)
    The result I get printed out in the text box is:
    rejected
    undefined
    Event: NetConnection.Connect.Rejected
    Type: error
    Message:[ Server.Reject ] : (_defaultRoot_, _defaultVHost_) :
    Application (simple) is not defined.
    But - the hosting service's interface panel shows that
    application "simple" is there. I sent the hosting service a support
    request, but I probably won't hear back from them until
    Monday.

    Hi Cisco_s,
    Your code looks good - I think there's nothing you can do
    other than wait. Apparently there's something wrong with the VHOST
    configuration on their side.

  • A  *** ERROR = RFC ====== connection closed (no data)

    I trace data On Instance DEV_W0 the had Error as below
    A  *** ERROR => RFC ======> connection closed (no data)
    Please Kindly  verify  the cuase and recommend in this issue .
    Edited by: SoeyTH on Dec 6, 2010 3:38 PM

    You need to proivde more logs to find what caused.
    Is you SAP up?

  • I am getting the following error using SQL Plus on Windows "ORA-28865: SSL connection closed"

    I have set up my certificates on client and server and have tested the port using TCP and works fine.  TCPS fails with ORA-28865.  I have attached my trace file which was using level 10
    Please any assistance is appreciated
    (5888) [11-APR-2015 09:36:28:365] nsnainit: NS Connection version: 315
    (5888) [11-APR-2015 09:36:28:365] nsnainit: inf->nsinfflg[0]: 0x41 inf->nsinfflg[1]: 0x41
    (5888) [11-APR-2015 09:36:28:365] nsnainit: "or" info flags: 0x41 Translations follow:
      native service(s) is (are) wanted
    (5888) [11-APR-2015 09:36:28:365] nsnainit: "or" info flags: 0x41 Translations follow:
      native service(s) is (are) wanted
    "and" info flags: 0x41 Translations follow:
      native service(s) is (are) wanted
    (5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
    (5888) [11-APR-2015 09:36:28:365] nsopen: global context check-in (to slot 0) complete
    (5888) [11-APR-2015 09:36:28:365] nsopen: lcl[0]=0xf4ffefff, lcl[1]=0x102000, gbl[0]=0xfabf, gbl[1]=0x1, tdu=2097152, sdu=8192
    (5888) [11-APR-2015 09:36:28:365] nsfull_opn: cid=0, opcode=65, *bl=0, *what=0, uflgs=0x0, cflgs=0x0
    (5888) [11-APR-2015 09:36:28:365] nsfull_opn: nsctx: state=7, flg=0x4001, mvd=0
    (5888) [11-APR-2015 09:36:28:365] nsmal: 168 bytes at 0x214d1a0
    (5888) [11-APR-2015 09:36:28:365] nsmal: 168 bytes at 0x214dbf0
    (5888) [11-APR-2015 09:36:28:365] nsmfr: 239 bytes at 0x20e53a0
    (5888) [11-APR-2015 09:36:28:365] nsdo: cid=0, opcode=67, *bl=238, *what=8, uflgs=0x0, cflgs=0x3
    (5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
    (5888) [11-APR-2015 09:36:28:365] nsdo: rank=64, nsctxrnk=0
    (5888) [11-APR-2015 09:36:28:365] nsdo: nsctx: state=14, flg=0x4005, mvd=0
    (5888) [11-APR-2015 09:36:28:365] nsdo: gtn=10, gtc=10, ptn=10, ptc=8111
    (5888) [11-APR-2015 09:36:28:365] nscon: doing connect handshake...
    (5888) [11-APR-2015 09:36:28:365] nscon: sending NSPTCN packet
    (5888) [11-APR-2015 09:36:28:365] nspsend: plen=70, type=1
    (5888) [11-APR-2015 09:36:28:365] ntzwrite: entry
    (5888) [11-APR-2015 09:36:28:365] nzos_Write: entry
    (5888) [11-APR-2015 09:36:28:365] nttwr: entry
    (5888) [11-APR-2015 09:36:28:365] nttwr: socket 560 had bytes written=99
    (5888) [11-APR-2015 09:36:28:365] nttwr: exit
    (5888) [11-APR-2015 09:36:28:365] nzos_Write: exit
    (5888) [11-APR-2015 09:36:28:365] ntzwrite: exit
    (5888) [11-APR-2015 09:36:28:365] nspsend: 70 bytes to transport
    (5888) [11-APR-2015 09:36:28:365] nscon: sending 238 bytes connect data
    (5888) [11-APR-2015 09:36:28:365] nsdo: cid=0, opcode=67, *bl=238, *what=1, uflgs=0x4002, cflgs=0x0
    (5888) [11-APR-2015 09:36:28:365] nsdo: nsctx: state=2, flg=0x4005, mvd=0
    (5888) [11-APR-2015 09:36:28:365] nsdo: gtn=10, gtc=10, ptn=10, ptc=431
    (5888) [11-APR-2015 09:36:28:365] nsdo: 238 bytes to NS buffer
    (5888) [11-APR-2015 09:36:28:365] nsdofls: DATA flags: 0x0
    (5888) [11-APR-2015 09:36:28:365] nsdofls: sending NSPTDA packet
    (5888) [11-APR-2015 09:36:28:365] nspsend: plen=248, type=6
    (5888) [11-APR-2015 09:36:28:365] ntzwrite: entry
    (5888) [11-APR-2015 09:36:28:365] nzos_Write: entry
    (5888) [11-APR-2015 09:36:28:365] nttwr: entry
    (5888) [11-APR-2015 09:36:28:365] nttwr: socket 560 had bytes written=277
    (5888) [11-APR-2015 09:36:28:365] nttwr: exit
    (5888) [11-APR-2015 09:36:28:365] nzos_Write: exit
    (5888) [11-APR-2015 09:36:28:365] ntzwrite: exit
    (5888) [11-APR-2015 09:36:28:365] nspsend: 248 bytes to transport
    (5888) [11-APR-2015 09:36:28:365] nsdoacts: flushing transport
    (5888) [11-APR-2015 09:36:28:365] ntzcontrol: entry
    (5888) [11-APR-2015 09:36:28:365] ntzcontrol: Command = 4
    (5888) [11-APR-2015 09:36:28:365] ntzcontrol: unknown command 4 - calling underlying protocol adapter
    (5888) [11-APR-2015 09:36:28:365] nttctl: entry
    (5888) [11-APR-2015 09:36:28:365] ntzcontrol: operation is unsupported
    (5888) [11-APR-2015 09:36:28:365] ntzcontrol: exit
    (5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
    (5888) [11-APR-2015 09:36:28:365] nsdo: nsctxrnk=0
    (5888) [11-APR-2015 09:36:28:365] nsdo: cid=0, opcode=68, *bl=2048, *what=9, uflgs=0x0, cflgs=0x3
    (5888) [11-APR-2015 09:36:28:365] snsbitts_ts: acquired the bit
    (5888) [11-APR-2015 09:36:28:365] nsdo: rank=64, nsctxrnk=0
    (5888) [11-APR-2015 09:36:28:365] nsdo: nsctx: state=2, flg=0x4005, mvd=0
    (5888) [11-APR-2015 09:36:28:365] nsdo: gtn=10, gtc=10, ptn=10, ptc=8111
    (5888) [11-APR-2015 09:36:28:380] nscon: recving a packet
    (5888) [11-APR-2015 09:36:28:380] nsprecv: reading from transport...
    (5888) [11-APR-2015 09:36:28:380] ntzread: entry
    (5888) [11-APR-2015 09:36:28:380] ntznzosread: entry
    (5888) [11-APR-2015 09:36:28:380] nzos_Read: entry
    (5888) [11-APR-2015 09:36:28:380] nttrd: entry
    (5888) [11-APR-2015 09:36:28:380] ntt2err: entry
    (5888) [11-APR-2015 09:36:28:380] ntt2err: exit
    (5888) [11-APR-2015 09:36:28:380] nttrd: socket 560 had bytes read=0
    (5888) [11-APR-2015 09:36:28:380] nttrd: exit
    (5888) [11-APR-2015 09:36:28:380] nzos_Read: exit
    (5888) [11-APR-2015 09:36:28:380] ntznzosread: encountered "wouldblock" error
    (5888) [11-APR-2015 09:36:28:380] ntctst: size of NTTEST list is 1 - not calling poll
    (5888) [11-APR-2015 09:36:28:396] nzos_Read: entry
    (5888) [11-APR-2015 09:36:28:396] nttrd: entry
    (5888) [11-APR-2015 09:36:28:396] nttrd: exit
    (5888) [11-APR-2015 09:36:28:396] ntt2err: entry
    (5888) [11-APR-2015 09:36:28:396] ntt2err: Read unexpected EOF ERROR on 560
    (5888) [11-APR-2015 09:36:28:396] ntt2err: exit
    (5888) [11-APR-2015 09:36:28:396] nzos_Read: exit
    (5888) [11-APR-2015 09:36:28:396] ntznzosread: SSL connection closed gracefully.
    (5888) [11-APR-2015 09:36:28:396] ntznzosread: SSL connection terminated normally.
    (5888) [11-APR-2015 09:36:28:396] ntznzosread: returning NZ error 28865 in result structure
    (5888) [11-APR-2015 09:36:28:396] ntznzosread: exit
    (5888) [11-APR-2015 09:36:28:396] nserror: nsres: id=0, op=68, ns=12537, ns2=12560; nt[0]=507, nt[1]=0, nt[2]=0; ora[0]=28865, ora[1]=0, ora[2]=0
    (5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
    (5888) [11-APR-2015 09:36:28:396] nsdo: nsctxrnk=0
    (5888) [11-APR-2015 09:36:28:396] nscall: unexpected response
    (5888) [11-APR-2015 09:36:28:396] nsvntx_dei: entry
    (5888) [11-APR-2015 09:36:28:396] nsvntx_dei: exit
    (5888) [11-APR-2015 09:36:28:396] nstimarmed: no timer allocated
    (5888) [11-APR-2015 09:36:28:396] ntzcontrol: entry
    (5888) [11-APR-2015 09:36:28:396] ntzcontrol: Command = 14
    (5888) [11-APR-2015 09:36:28:396] ntzcontrol: exit
    (5888) [11-APR-2015 09:36:28:396] ntzcontrol: entry
    (5888) [11-APR-2015 09:36:28:396] ntzcontrol: Command = 15
    (5888) [11-APR-2015 09:36:28:396] ntzcontrol: exit
    (5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
    (5888) [11-APR-2015 09:36:28:396] nsfull_cls: cid=0, opcode=65, *bl=0, *what=0, uflgs=0x0, cflgs=0x440
    (5888) [11-APR-2015 09:36:28:396] nsfull_cls: nsctx: state=1, flg=0x4001, mvd=0
    (5888) [11-APR-2015 09:36:28:396] nsclose: closing transport
    (5888) [11-APR-2015 09:36:28:396] ntzdisconnect: entry
    (5888) [11-APR-2015 09:36:28:396] ntzFreeNTZData: entry
    (5888) [11-APR-2015 09:36:28:396] nzos_DestroyCtx: entry
    (5888) [11-APR-2015 09:36:28:396] nzos_DestroyCtx: exit
    (5888) [11-APR-2015 09:36:28:396] ntzFreeNTZData: exit
    (5888) [11-APR-2015 09:36:28:396] nttdisc: entry
    (5888) [11-APR-2015 09:36:28:396] nttdisc: Closed socket 560
    (5888) [11-APR-2015 09:36:28:396] nttdisc: exit
    (5888) [11-APR-2015 09:36:28:396] ntzdisconnect: exit
    (5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
    (5888) [11-APR-2015 09:36:28:396] nsclose: global context check-out (from slot 0) complete
    (5888) [11-APR-2015 09:36:28:396] nadisc: entry
    (5888) [11-APR-2015 09:36:28:396] nacomtm: entry
    (5888) [11-APR-2015 09:36:28:396] nacompd: entry
    (5888) [11-APR-2015 09:36:28:396] nacompd: exit
    (5888) [11-APR-2015 09:36:28:396] nacompd: entry
    (5888) [11-APR-2015 09:36:28:396] nacompd: exit
    (5888) [11-APR-2015 09:36:28:396] nacomtm: exit
    (5888) [11-APR-2015 09:36:28:396] nas_dis: entry
    (5888) [11-APR-2015 09:36:28:396] nas_dis: exit
    (5888) [11-APR-2015 09:36:28:396] nau_dis: entry
    (5888) [11-APR-2015 09:36:28:396] nau_dis: exit
    (5888) [11-APR-2015 09:36:28:396] naeetrm: entry
    (5888) [11-APR-2015 09:36:28:396] naeetrm: exit
    (5888) [11-APR-2015 09:36:28:396] naectrm: entry
    (5888) [11-APR-2015 09:36:28:396] naectrm: exit
    (5888) [11-APR-2015 09:36:28:396] nagbltrm: entry
    (5888) [11-APR-2015 09:36:28:396] nau_gtm: entry
    (5888) [11-APR-2015 09:36:28:396] nau_gtm: exit
    (5888) [11-APR-2015 09:36:28:396] nagbltrm: exit
    (5888) [11-APR-2015 09:36:28:396] nadisc: exit
    (5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
    (5888) [11-APR-2015 09:36:28:396] nsvntx_dei: entry
    (5888) [11-APR-2015 09:36:28:396] nsvntx_dei: exit
    (5888) [11-APR-2015 09:36:28:396] snsbitts_ts: acquired the bit
    (5888) [11-APR-2015 09:36:28:396] nsmfr: 2944 bytes at 0x2152400
    (5888) [11-APR-2015 09:36:28:396] nsmfr: 1880 bytes at 0x2151ca0
    (5888) [11-APR-2015 09:36:28:396] nscall: connecting...
    (5888) [11-APR-2015 09:36:28:396] nladget: entry
    (5888) [11-APR-2015 09:36:28:396] nladget: exit
    (5888) [11-APR-2015 09:36:28:396] nsmfr: 238 bytes at 0x221def0
    (5888) [11-APR-2015 09:36:28:412] nsmfr: 304 bytes at 0x20d8200
    (5888) [11-APR-2015 09:36:28:412] nladtrm: entry
    (5888) [11-APR-2015 09:36:28:412] nladtrm: exit
    (5888) [11-APR-2015 09:36:28:412] nioqper:  error from nscall
    (5888) [11-APR-2015 09:36:28:412] nioqper:    ns main err code: 12537
    (5888) [11-APR-2015 09:36:28:412] nioqper:    ns (2)  err code: 12560
    (5888) [11-APR-2015 09:36:28:412] nioqper:    nt main err code: 507
    (5888) [11-APR-2015 09:36:28:412] nioqper:    nt (2)  err code: 0
    (5888) [11-APR-2015 09:36:28:412] nioqper:    nt OS   err code: 0
    (5888) [11-APR-2015 09:36:28:412] niomapnserror: entry
    (5888) [11-APR-2015 09:36:28:412] niqme: entry
    (5888) [11-APR-2015 09:36:28:412] niqme: reporting ORA-28865 error
    (5888) [11-APR-2015 09:36:28:412] niqme: exit
    (5888) [11-APR-2015 09:36:28:412] niomapnserror: exit
    (5888) [11-APR-2015 09:36:28:412] niotns: Couldn't connect, returning 28865
    (5888) [11-APR-2015 09:36:28:412] niotns: exit
    (5888) [11-APR-2015 09:36:28:412] nsbrfr: nsbfs at 0x214d1a0, data at 0x2225ca0.
    (5888) [11-APR-2015 09:36:28:412] nsbrfr: nsbfs at 0x214dbf0, data at 0x2227d90.
    (5888) [11-APR-2015 09:36:28:412] nsbrfr: nsbfs at 0x214d9e0, data at 0x21531c0.
    (5888) [11-APR-2015 09:36:28:412] nigtrm: Count in the NI global area is now 1
    (5888) [11-APR-2015 09:36:28:412] nigtrm: Count in the NL global area is now 1

    CLIENT SQLNET.ORA
    TRACE_LEVEL_CLIENT = 10
    TRACE_UNIQUE_CLIENT = ON
    TRACE_DIRECTORY_CLIENT = C:\Oracle\app\client\product\12.1.0\client_1\network\trace
    TRACE_FILE_CLIENT = sqlnet_client.trc
    LOG_FILE_CLIENT = sqlnet_client.log
    LOG_DIRECTORY_CLIENT = C:\Oracle\app\client\product\12.1.0\client_1\network\log
    DIAG_ADR_ENABLED = OFF
    TRACE_TIMESTAMP_CLIENT = ON
    SQLNET.AUTHENTICATION_SERVICES = (ALL)
    SQLNET.AUTHENTICATION_REQUIRED = FALSE
    SSL_CLIENT_AUTHENTICATION = FALSE
    WALLET_LOCATION =
      (SOURCE =
        (METHOD = FILE)
        (METHOD_DATA =
          (DIRECTORY = C:\Oracle\app\client\product\12.1.0\client_1\network\wallets)
    ADR_BASE = C:\Oracle\app\client\product\12.1.0\client_1\log
    SERVER SQLNET.ORA
    SQLNET.AUTHENTICATION_SERVICES= (ALL)
    SSL_VERSION = 0
    SSL_CLIENT_AUTHENTICATION = FALSE
    TRACE_UNIQUE_SERVER = ON
    TRACE_DIRECTORY_SERVER = /u01/app/grid/product/12.1.0/12.1.0.2/network/trace
    TRACE_FILE_SERVER = sqlnet_server.trc
    LOG_FILE_SERVER = sqlnet_server.log
    WALLET_LOCATION =
      (SOURCE =
        (METHOD = FILE)
        (METHOD_DATA =
          (DIRECTORY = /u01/app/grid/product/12.1.0/12.1.0.2/owm/wallets/grid)
    LOG_DIRECTORY_SERVER = /u01/app/grid/product/12.1.0/12.1.0.2/network/log
    SQLNET.AUTHENTICATION_REQUIRED = FALSE
    DIAG_ADR_ENABLED = OFF
    TRACE_TIMESTAMP_SERVER = ON

  • FTP Adapter ORABPEL-11407 Connection closed error.

    Hiiii friends
    I have configured the connection factory for FTP Adapter (not defined any connection pool). My BPEL process poll the ftp location to get the file.
    But no bpel instance is getting generated and domain.log shows the following error. Can you help me in this issue ?
    +<2009-06-26 04:09:59,140> <INFO> <default.collaxa.cube.engine.deployment> Process "ReadEmp" (revision "1.0") successfully loaded.+
    +<2009-06-26 04:10:10,666> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::init - Initializing the JCA activation age+
    nt, processId='bpel://localhost/default/ReadEmp~1.0/
    +<2009-06-26 04:10:10,667> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::initiateInboundJcaEndpoint - Creating and+
    initializing inbound JCA endpoint for:
    process='bpel://localhost/default/ReadEmp~1.0/'
    +<2009-06-26 04:10:10,667> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> JCAActivationAgent::initiateInboundJcaEndpoint - Creating and+
    initializing inbound JCA endpoint for:
    process='bpel://localhost/default/ReadEmp~1.0/'
    domain='default'
    WSDL location='ReadEmpPL.wsdl'
    portType='GetEmpOp_ptt'
    operation='GetEmpOp'
    +activation properties={portType=GetEmpOp_ptt}+
    +<2009-06-26 04:10:10,678> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - endpointActivation for p+
    ortType=GetEmpOp_ptt, operation=GetEmpOp
    +<2009-06-26 04:10:10,763> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> ENDPOINT ACTIVATION CALLED IN FTP ADAPTER+
    +<2009-06-26 04:10:10,765> <INFO> <default.collaxa.cube.activation> <AdapterFramework::Inbound> Adapter Framework instance: OraBPEL - successfully completed e+
    ndpointActivation for portType=GetEmpOp_ptt, operation=GetEmpOp
    +<2009-06-26 04:10:10,765> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created+
    +<2009-06-26 04:10:40,516> <WARN> <default.collaxa.cube.activation> <File Adapter::Inbound> PollWork::run exiting, Worker thread will die+
    +<2009-06-26 04:20:11,382> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Poller raising Alert for exception : ORABPEL-11407+
    Connection closed error.
    Connection closed for Host: corpdevapp10.
    Check the error stack and fix the cause of the error. Contact oracle support if error is not fixable.
    +<2009-06-26 04:20:41,429> <INFO> <default.collaxa.cube.activation> <File Adapter::Inbound> Connection Created+
    I am not sure what exactly is happening here. I have already established the successful connection with the same FTP server using different FTP clients.

    sounds like the ftp server closed the connection. did you try to use other ftp clients from the same machine where the bpel engine is running?
    Mark

  • Connection closed by remote host on SOAP Receiver Scenario

    Hi Experts,
    I implemented a RFC to SOAP Receiver scenario, consuming an external
    Web Service with SSL security, using SAP PI 7.1. I configured the SOAP
    Receiver Adapter with Proxy e Proxy User, and it shows the
    message u201CConnection closed by remote hostu201D. I have checked with
    Network team, about the firewall restrictions, and they told me it was
    pass by firewall. I installed the SOAP UI on the PI DEV Server to test
    the SOAP Requets and it worked. Only on the PI it shows this error
    message. I traced log at SLL service in the Sap Netweaver Administrator
    and I didnu2019t get success.
    Long text error:
    com.sap.engine.interfaces.messaging.api.exception.MessagingException:
    java.io.EOFException: Connection closed by remote
    Please, could you help me about this error?
    Fábio Ferri

    Hi Fabio,
    You need to set higher trace level in order to get more information in your trace file.
    If you think it is related to security then set logging level of components com.sap.aii.security.lib and com.sap.aii.af.security to DEBUG in Visual Admin's log configurator. Also set com.sap.aii.af.mp.soap and com.sap.aii.messaging to DEBUG level.
    And then try sending messages and see whether you have received more informaiton in trace file, but don't forget to revert back the change once you finish testing otherwise it will filled up your diskspace.
    Best regards,
    Pinkle

  • Connection closed by remote host for RNIF

    Hi All,
    Hi All,
    Any one can help us. We are getting the following issue while customer trying to send the data to XI.
    https://XXXXX:YYYYY/MessagingSystem/receive/RNIFAdapter/RNIF received HTTP response "699". Error connecting to host XXXXX at port YYYYY . Connection closed by remote host.
    Scenario details:
    RNIF to Proxy scenario
    it is very very urgent.Please help
    Thanks,
    Meera

    Was this issue resolved? Possibly a network issue but not too sure. Can you share more info?
    Are you able to hit the RNIF URL within your LAN?

  • Netconnection.connect.failed

    hi, all. i am a freshman in the flash media server. I write
    the client with the flex, and the server is the flash media
    server2, when i connect to the server, the test information tells
    me the message: netconnection.connect.failed. but i write some
    trace code in the server, the server log has shown them, i don't
    know if i have connected the server, but when i connect to my
    server with other's computer, it give me a error: Unhandled
    NetStatusEvent:level=error, code=NetConnection.Connect.Failed
    WebService/linkserver() at WebService/__btn1_click() at
    [mouseEvent].
    as follow the source code
    the client:
    <?xml version="1.0" encoding="utf-8"?>
    <mx:Application xmlns:mx="
    http://www.adobe.com/2006/mxml"
    layout="absolute">
    <mx:Script>
    <![CDATA[
    import flash.net.*;
    import mx.rpc.events.ResultEvent;
    import mx.controls.Alert;
    import flash.net.NetConnection;
    public function linkserver():void
    nc = new NetConnection();
    //nc.client;
    nc.addEventListener("netStatus", test);
    nc.connect("rtmp://localhost/firstApp","b");
    public function test(event:NetStatusEvent):void
    Alert.show(event.info.code);
    <mx:Button id="button2" label="linkserver"
    click="linkserver()" x="255" y="397"/>
    </mx:Application>
    server( main.asc)
    application.onConnect=function(client,name){
    if(name=="a"){
    trace("rejectConnection");
    application.rejectConnection(client, {msg:"server don't
    let"+name+"connecting~"});
    if(name=="b"){
    trace("succeful");
    this.acceptConnection(client);

    You may have the app set to rtmp:/app or rtmp://localhost/app
    but should be rtmp://public ip to server/app or
    rtmpt://public ip to server:1935/app
    Also firewalls and some antivirus or security programs make
    stop the connection.
    HTH

  • SOAP: call failed: java.io.EOFException: Connection closed by remote host

    Hi folks,
    my friday crusher:
    We have a sync RFC-PI-SOAP scenario.
    All is working fine in Dev system.
    After moving into Test following error is displayed as the SOAP response message:
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
    <SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.EOFException: Connection closed by remote host.</SAP:AdditionalText>
      <SAP:Stack />
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Also Channel Monitoring says:
    Message-Verarbeitung fehlgeschlagen. Grund: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.EOFException: Connection closed by remote host.
    Couldn´t find any hints in SDN and the web to this issue.
    Does anyone of you has made experiences with that problem?
    Maybe it´s a system parameter for time out SOAP connections....?
    Many thanks for your help
    -and-
    have a great weekend!
    Cheers
    André

    Very strange!
    But I have the solution:
    I have looked into channel monitoring / RWB again.
    There I saw, this PI is using two clusters on two application servers.
    Everytime the SOAP call is executed through the frist cluster, all was fine.
    But no SOAP call was successfully executed by the second cluster.
    Fortuity? No!
    The second cluster node / app server wasn´t registered for internet access in the used proxy server.
    So it wasn´t an PI issue.
    Now, all is fine & I´m happy!
    Thanks @all for helping!
    Cheers,
    André

  • TNS: connection closed error with SQL*net

    Hi all,
    I've got a new installation of Oracle 11.1.0.6.0 enterprise (Linux). It works fine with direct sqlplus connections but I'm having problems with SQL*net and JDBC thin client connections.
    The database is built correctly and works fine:
    user@cthulhu bash[61]: sqlplus user/pwd
    SQL*Plus: Release 11.1.0.6.0 - Production on Mon Aug 4 12:59:53 2008
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    SQL> select * from v$version;
    BANNER
    Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
    PL/SQL Release 11.1.0.6.0 - Production
    CORE 11.1.0.6.0 Production
    TNS for Linux: Version 11.1.0.6.0 - Production
    NLSRTL Version 11.1.0.6.0 - Production
    SQL>
    but if I try to connect using SQL*net I get errors. I have my TNS listener configured and it starts without errors, reporting the database as a service, and tnsping is fine:
    user@cthulhu bash[62]: tnsping cthulhu_mar
    TNS Ping Utility for Linux: Version 11.1.0.6.0 - Production on 04-AUG-2008 13:02:07
    Copyright (c) 1997, 2007, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=TCP)(HOST=192.168.2.30)(PORT=1521)) (CONNECT_DATA=(SID=mar)))
    OK (10 msec)
    user@cthulhu bash[63]: sqlplus user/pwd@cthulhu_mar
    SQL*Plus: Release 11.1.0.6.0 - Production on Mon Aug 4 13:02:41 2008
    Copyright (c) 1982, 2007, Oracle. All rights reserved.
    ERROR:
    ORA-12537: TNS:connection closed
    Enter user-name:
    In listener.log:
    Mon Aug 04 13:02:41 2008
    04-AUG-2008 13:02:41 * (CONNECT_DATA=(SID=mar)(CID=(PROGRAM=sqlplus)(HOST=cthulhu)(USER=marbur))) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.2.30)(PORT=41754)) * establish * mar * 12518
    TNS-12518: TNS:listener could not hand off client connection
    TNS-12547: TNS:lost contact
    TNS-12560: TNS:protocol adapter error
    TNS-00517: Lost contact
    Linux Error: 32: Broken pipe
    This is a new instance of Oracle so there is no problem with listener.log being too large (as I've seen elsewhere). I've also tried increasing PROCESSES and SESSIONS in the initSID.ora file without any impact. The listener ports are open through the firewall (and disabling it temporarily makes no difference).
    Any suggestions?!
    Thanks, Matt

    This means nothing to me, but it could to someone else......
    from listener trace:
    2008-08-04 16:19:05.135381 : nlpcaini:env[161] = OLDPWD=/u01/app/oracle/product/11.1.0/db_1
    2008-08-04 16:19:05.135407 : nlpcaini:env[162] = ORA_NET2_DESC=12,15
    2008-08-04 16:19:05.135432 : nlpcaini:env[163] = ORACLE_SPAWNED_PROCESS=1
    2008-08-04 16:19:05.135465 : nlpcaini:exit
    2008-08-04 16:19:05.135498 : nsc2addr:normal exit
    2008-08-04 16:19:05.135536 : nsbeqaddr:entry
    2008-08-04 16:19:05.135566 : nsbeqaddr:connecting...
    2008-08-04 16:19:05.135603 : nsopen:entry
    2008-08-04 16:19:05.135633 : nsmal:entry
    2008-08-04 16:19:05.135667 : nsmal:1012 bytes at 0x81a8538
    2008-08-04 16:19:05.135694 : nsmal:normal exit
    2008-08-04 16:19:05.135722 : nsopenmplx:entry
    2008-08-04 16:19:05.135749 : nsmal:entry
    2008-08-04 16:19:05.135779 : nsmal:2020 bytes at 0x81a8930
    2008-08-04 16:19:05.135804 : nsmal:normal exit
    2008-08-04 16:19:05.135831 : nsiorini:entry
    2008-08-04 16:19:05.135861 : nsbal:entry
    2008-08-04 16:19:05.135889 : nsbgetfl:entry
    2008-08-04 16:19:05.135918 : nsbgetfl:normal exit
    2008-08-04 16:19:05.135966 : nsmal:entry
    2008-08-04 16:19:05.135995 : nsmal:84 bytes at 0x81b3dd8
    2008-08-04 16:19:05.136020 : nsmal:normal exit
    2008-08-04 16:19:05.136057 : nsbal:normal exit
    2008-08-04 16:19:05.136085 : nsiorini:exit (0)
    2008-08-04 16:19:05.136112 : nscpxget:entry
    2008-08-04 16:19:05.136139 : nscpxget:normal exit
    2008-08-04 16:19:05.136168 : nsopenalloc_nsntx:nlhthput on mplx_ht_nsgbu:ctx=81a8538, nsntx=81a8930
    2008-08-04 16:19:05.136196 : nsopenmplx:normal exit
    2008-08-04 16:19:05.136225 : ntpcon:entry
    2008-08-04 16:19:05.136253 : ntpcon:toc = 6
    2008-08-04 16:19:05.136283 : ntpcon:exit
    2008-08-04 16:19:05.136313 : nsopen:opening transport...
    2008-08-04 16:19:05.136341 : ntpcon:entry
    2008-08-04 16:19:05.136367 : ntpcon:toc = 1
    2008-08-04 16:19:05.136404 : sntpcall:entry
    2008-08-04 16:19:05.157048 : sntpcall:detaching from parent with additional fork
    2008-08-04 16:19:05.157304 : sntpcall:hdl[IR]=17, hdl[IW]=16
    2008-08-04 16:19:05.157350 : ntpcon:exit
    2008-08-04 16:19:05.157390 : nserror:entry
    2008-08-04 16:19:05.157428 : nsoptions:entry
    2008-08-04 16:19:05.157459 : nsoptions:lcl[0]=0x0, lcl[1]=0x2006, gbl[0]=0x0, gbl[1]=0x0, cha=0x0
    2008-08-04 16:19:05.157488 : nsoptions:Vectored IO not supported.
    2008-08-04 16:19:05.157518 : nsoptions:lcl[0]=0xf4ffe9ff, lcl[1]=0x6016, gbl[0]=0xe881, gbl[1]=0x0
    2008-08-04 16:19:05.157545 : nsoptions:normal exit
    2008-08-04 16:19:05.157574 : nsnainit:entry
    2008-08-04 16:19:05.157603 : nsnainit:normal exit
    2008-08-04 16:19:05.157642 : nsopen:global context check-in (to slot 6) complete
    2008-08-04 16:19:05.157675 : nsopen:lcl[0]=0xf4ffe9ff, lcl[1]=0x6016, gbl[0]=0xe881, gbl[1]=0x0, tdu=4096, sdu=8192
    2008-08-04 16:19:05.157706 : nsfull_opn:entry
    2008-08-04 16:19:05.157735 : nsfull_opn:cid=6, opcode=65, bl=0, what=0, uflgs=0x0, cflgs=0x0
    2008-08-04 16:19:05.157761 : nsfull_opn:nsctx: state=7, flg=0x4001, mvd=0
    2008-08-04 16:19:05.157790 : nsfull_opn:normal exit
    2008-08-04 16:19:05.157816 : nsopen:normal exit
    2008-08-04 16:19:05.157854 : nsevreg:entry
    2008-08-04 16:19:05.157884 : nsevreg:begin registration process for 6
    2008-08-04 16:19:05.157912 : nsevregPrePost:entry
    2008-08-04 16:19:05.157940 : nsevregPrePost:normal exit
    2008-08-04 16:19:05.157968 : nsevreg:sgt=0, evn=1, evt[2]=0x0
    2008-08-04 16:19:05.157996 : nsevreg:begin notification process for 6
    2008-08-04 16:19:05.158022 : nsevregAffectNotif:entry
    2008-08-04 16:19:05.158050 : nsevregAffectNotif:exit (0)
    2008-08-04 16:19:05.158078 : nsevreg:rdm=0, sgt=0, evt[0]=0x800, [1]=0x800, [2]=0x0, nrg=0
    2008-08-04 16:19:05.158105 : nsevreg:registering for 0x800
    2008-08-04 16:19:05.158135 : ntpctl:entry
    2008-08-04 16:19:05.158162 : ntpctl:exit
    2008-08-04 16:19:05.158203 : nsevreg:normal exit
    2008-08-04 16:19:05.158260 : nsbeqaddr:error exit
    2008-08-04 16:19:05.158289 : nsbequeath:error exit
    2008-08-04 16:19:05.158342 : nsglhe:exit

  • Openssh 3.18.1 on Solaris 8: sftp connection closed

    Hi, to setup a secure environment for file transfer, I have installed the following packages in my solaris 8.
    - openssh-3.8
    - openssl-0.9.7d-Solaris8-local
    - prngd-0.9.26-Solaris8-local
    - tcpwrappers-7.6-Solaris8-local
    - zlib-1.2.1-Solaris8-local
    I do not have any problem with SSH but I kept getting Connection Closed when I tried to sftp or scp into my Solaris 8. I have verified the user info is correct but have really no idea what is the problem. Following is the debug output from a windows client to my solaris 8:
    C:\>sftp -v [email protected]
    Connecting to 172.18.5.100...
    OpenSSH_3.8.1p1, OpenSSL 0.9.7d 17 Mar 2004
    debug1: Reading configuration data /etc/ssh_config
    debug1: Connecting to 172.18.5.100 [172.18.5.100] port 22.
    debug1: Connection established.
    debug1: identity file /home/derrence/.ssh/id_rsa type -1
    debug1: identity file /home/derrence/.ssh/id_dsa type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_3.8.1p1
    debug1: match: OpenSSH_3.8.1p1 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_3.8.1p1
    debug1: SSH2_MSG_KEXINIT sent
    debug1: SSH2_MSG_KEXINIT received
    debug1: kex: server->client aes128-cbc hmac-md5 none
    debug1: kex: client->server aes128-cbc hmac-md5 none
    debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
    debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
    debug1: Host '172.18.5.100' is known and matches the RSA host key.
    debug1: Found key in /home/derrence/.ssh/known_hosts:1
    debug1: ssh_rsa_verify: signature correct
    debug1: SSH2_MSG_NEWKEYS sent
    debug1: expecting SSH2_MSG_NEWKEYS
    debug1: SSH2_MSG_NEWKEYS received
    debug1: SSH2_MSG_SERVICE_REQUEST sent
    debug1: SSH2_MSG_SERVICE_ACCEPT received
    debug1: Authentications that can continue: publickey,password,keyboard-interacti
    ve
    debug1: Next authentication method: publickey
    debug1: Trying private key: /home/derrence/.ssh/id_rsa
    debug1: Trying private key: /home/derrence/.ssh/id_dsa
    debug1: Next authentication method: keyboard-interactive
    debug1: Authentications that can continue: publickey,password,keyboard-interacti
    ve
    debug1: Next authentication method: password
    [email protected]'s password:
    debug1: Authentication succeeded (password).
    debug1: channel 0: new [client-session]
    debug1: Entering interactive session.
    debug1: Sending subsystem: sftp
    debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
    debug1: channel 0: free: client-session, nchannels 1
    debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 0.1 seconds
    debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
    debug1: Exit status 137
    It exited with a Status 137. Can anyone advice on this problem? I've trying to google around but to no avail. pls help. thanks

    I am also getting a similar error w.r.t sftp on Solairs 9.
    openSSH 0.9.8
    ./sftp -v [email protected]
    Connecting to 10.205.254.118...
    OpenSSH_4.0p1, OpenSSL 0.9.7e 25 Oct 2004
    debug1: Reading configuration data /usr/local/etc/ssh_config
    debug1: Applying options for *
    debug1: Connecting to 10.205.254.118 [10.205.254.118] port 22.
    debug1: Connection established.
    debug1: read PEM private key done: type DSA
    debug1: read PEM private key done: type RSA
    debug1: permanently_set_uid: 0/0
    debug1: identity file /.ssh/id_rsa type -1
    debug1: identity file /.ssh/id_dsa type -1
    debug1: Remote protocol version 2.0, remote software version OpenSSH_4.0
    debug1: match: OpenSSH_4.0 pat OpenSSH*
    debug1: Enabling compatibility mode for protocol 2.0
    debug1: Local version string SSH-2.0-OpenSSH_4.0
    debug1: SSH2_MSG_KEXINIT sent
    debug1: SSH2_MSG_KEXINIT received
    debug1: kex: server->client aes128-cbc hmac-md5 none
    debug1: kex: client->server aes128-cbc hmac-md5 none
    debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
    debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
    debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
    debug1: Host '10.205.254.118' is known and matches the RSA host key.
    debug1: Found key in /usr/local/etc/ssh_known_hosts:2
    debug1: ssh_rsa_verify: signature correct
    debug1: SSH2_MSG_NEWKEYS sent
    debug1: expecting SSH2_MSG_NEWKEYS
    debug1: SSH2_MSG_NEWKEYS received
    debug1: SSH2_MSG_SERVICE_REQUEST sent
    debug1: SSH2_MSG_SERVICE_ACCEPT received
    debug1: Authentications that can continue: password,hostbased
    debug1: Next authentication method: hostbased
    debug1: Remote: Ignoring wild host/user names in /etc/hosts.equiv.
    debug1: Authentications that can continue: password,hostbased
    debug1: Remote: Ignoring wild host/user names in /etc/hosts.equiv.
    debug1: Authentications that can continue: password,hostbased
    debug1: No more client hostkeys for hostbased authentication.
    debug1: Next authentication method: password
    [email protected]'s password:
    debug1: Authentication succeeded (password).
    debug1: channel 0: new [client-session]
    debug1: Entering interactive session.
    debug1: Sending subsystem: sftp
    debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
    debug1: channel 0: free: client-session, nchannels 1
    debug1: fd 0 clearing O_NONBLOCK
    debug1: Transferred: stdin 0, stdout 0, stderr 0 bytes in 4.6 seconds
    debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 0.0
    debug1: Exit status 2
    Connection closed
    what might be the possible cause?

  • SFTP MGET of large files fails - connection closed - problem with spool file

    I have a new SFTP job to get files from an FTP Server.  The files are large (80mg, 150mg).  I can get smaller files from the ftp site with no issue, but when attempting the larger files the job completes abnormally after 2 min 1 sec. each time.  I can see the file is created on our local file system with 0 bytes, then when the FTP job fails, the 0 byte file is deleted.
    Is there a limit to how large an ftp file can be in Tidal?  How long an ftp job can run?
    The error in the job audit is Problem with spool file for job XXXX_SFTPGet and an exit code of 127 (whatever that is).
    In the log, the error is that the connection was closed.  I have checked with the ftp host and their logs show that we are disconnecting unexpectedly also.
    Below is an excerpt from the log
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.055 : Send : Name=SSH_FXP_STAT,Type=17,RequestID=12
    DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.055 : Transmit 44 bytes
    DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.055 : Remote window size decreased to 130808
    DEBUG [PlainSocket] 6 Feb 2015 14:17:33.071 : RepeatCallback received 84 bytes
    DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.071 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
    DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.071 : Received message (type=105,len=37)
    DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.071 : AddMessage(12) - added to store
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Reply : Name=SSH_FXP_ATTRS,Type=105,RequestID=12
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Send : Name=SSH_FXP_OPEN,Type=3,RequestID=13
    DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.071 : Transmit 56 bytes
    DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.071 : Remote window size decreased to 130752
    DEBUG [PlainSocket] 6 Feb 2015 14:17:33.087 : RepeatCallback received 52 bytes
    DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.087 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
    DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.087 : Received message (type=102,len=10)
    DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.087 : AddMessage(13) - added to store
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Reply : Name=SSH_FXP_HANDLE,Type=102,RequestID=13
    DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Send : Name=SSH_FXP_READ,Type=5,RequestID=14
    DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.087 : Transmit 26 bytes
    DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.087 : Remote window size decreased to 130726
    DEBUG [PlainSocket] 6 Feb 2015 14:17:33.118 : RepeatCallback received 0 bytes
    DEBUG [SFTPChannelReceiver] 6 Feb 2015 14:17:33.118 : Connection closed:  (code=0)
    ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : Disconnected unexpectedly ( [errorcode=0])
    ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : EnterpriseDT.Net.Ftp.Ssh.SFTPException:  [errorcode=0]
    ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 :    at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.CheckState()
    ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 :    at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.GetMessage(Int32 requestId)

    I believe there is a limitation on FTP and what you are seeing is a timeout built into the 3rd party application that tidal uses (I feel like it was hardcoded and it would be a big deal to change but this was before Cisco purchased tidal)  there may have been a tagent.ini setting that tweaks that but I can't find any details.
    We wound up purchasing our own FTP software (ipswitch MOVEit Central & DMZ) because we also had the need to host as well as Get/Put to other FTP sites. It now does all our FTP and internal file delivery activity (we use it's api and call from tidal if we need to trigger inside a workflow)

Maybe you are looking for

  • Not able to deploy HPCM application

    Hi Gurus, we are using version 11.1.2.2 and we have created an application in HPCM and when we validate the same it shows successful but when we try to deploy it it throws below error Process Name : Thread : 0 Server : Detail : Initiating Product Act

  • Import portal theme error

    Hi all,    when I import a portal theme in the portal system administrator,a error happened,"An exception occurred while processing the request; see log for details",and where I can find the error log file,thanks!

  • Network drive

    I've been a long time user of iPhoto on a network drive, and it seems to work fine. I have about a 60GB library. I thought recently I'd upgrade to aperture, since it seems to be an improved version of iPhoto. The first problem I encountered is that t

  • IE responds class not found.

    i am able to run my applet via appletviewer but IE6 responds class not found. IE version (6.0.2600.0000) i have compiled my code using jsdk1.4 Beta version is this a version problem?

  • Moving video from event library

    How do I move my movie from the Event Library to the Project Library so I can upload it to web?