Netconnection.connect(), which port to open

Hi all,
I have a swf running within a web browser and publishing audio stream to the server. If the client's computer has a firewall, should it be configured for outgoing netconnection.connect() request?
Thanks in advance
-s

Generally firewalls at clients end do not block outgoing connections but its not that they cannot be configured to do so. You can check if client's machine firewall blocks any outgoing connections and what all connections and on which port. If you find its blocking rtmp connections or blocking port 1935 and 80, you might want to open them.

Similar Messages

Which port is open for connection ?

how could I know which port is open for connection ?
In the java, I use JDBC to connect to Oracle,
connection = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:sid", "scott","tiger");Do we have a command to show open port ?
Thanks.

What is your Oracle version, and do you use dedicated connections or "shared servers"? From your port number invoked (1521), I'll guess you use dedicated connections. In that case, the listener (located at 1521) will "spawn" a dedicated process for your session, and tell this process to start on another port (usually falling on a certain range, depending on your OS). An easy way to see this would probably to turn listener tracing on. Here's what I found in the log file after I started a new (dedicated) session on my 10.2 DB:
"22-OCT-2006 21:31:16 * (CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=ora102)(CLIENT_REGISTRATION=ora102)(CID=(PROGRAM=C:\oracle92\bin\sqlplusw.exe)(HOST=DANIELROYLAPTOP)(USER=Daniel))(CLIENT_REGISTRATION=ora102)) * (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.1.100)(PORT=3198)) * establish * ora102 * 0"
HTH
Daniel

Which port need open for Imoprt WS in to the TREE ??

ZfD6.5SP2.
WS----firewall-------NW_SERVER
Which ports ned open on the firewall for import Ws in to the TREE ??
Serg

Serg,
>Which ports ned open on the firewall for import Ws in to the TREE ??
8039
Jared Jennings
Data Technique, Inc.
Novell Support Forums Sysop
http://wiki.novell.com

Which ports to open in PIX for outgoing Cisco VPN client connections ?

I have Cisco vpn clients behind the PIX and i want them to connect to a vpn 3005 which i behind another PIX . Can anybody tell me which ports i have to open on both the PIX firewalls ?

It depends on how you have deployed your VPN Remote Access users.
By default, if you enable IPSec-Over-TCP or IPSec-over-UDP, then port 10000 is used for both, these methods are Cisco Proprietary and can be changed.
If you use NAT-T (NAT Traversal), the Standards-based implementation, then it uses UDP-4500).
either way, the operation of the VPN depends on:
1) Whether these service have been enable on the VPN Concentrator
2) Enabling the relevant transport settings on the VPN Client connection Properties.
Regarding the PIX infront of the VPNC3005, you will need to allow these above ports inbound to your VPNC3005 Public interface.
Locally, it depends if you filter outbound connections through your PIX. If you don't, then the PIX will allow the connection for the VPN Client attempting to access the remote VPNC3005

Which ports to open on winxp when filesharing?

When I tries to connect a winxp shared folder from a mac it does not work if the firewall on xp is on, when I turn it off everythings works ok. Which ports do I need to open?
/Ulf

What I would suggest is that you install Little Snitch on your mac. Little Snitch is an application aware firewall that controls your outgoing connections.
By default little snitch allows out any network connections on your local network, so if you remove that rule it will alert you when you try and connect to your windows sharepoint, it will also tell you which port it is trying to connect to.
You may then see the complete ports you need to open your windows firewall.
The other thing you could do is give your computers static ip addresses on your network then setup a firewall rule on your windows box to allow all connections from your mac's ip address.

Which ports to open on FW for Voip

Hello,
Can anyone tell me which ports (TCP and UPD) to open on the firewall when you have ip phones and ip communicator behind it?
This just to squeeze down the range a bit.
Thanks for your help.
Kurt

Kurt,
Take a look at the following link.
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/sec_vir/udp_tcp/index.htm
Hope this helps. If so, please rate the post.
Brandon

Which ports to open for registering an iPod Touch OTA via proxy / firewall ?

I need to set up some iPod Touch over the air via a wifi network controlled with a firewall. I get a message "unable to connect registration server". I suppose I have to open ports, but which ones ??

Try here:
http://support.apple.com/kb/ts3297
http://support.apple.com/kb/TS3125

Which ports need open for:...

Ws(xp_prof)+BM39VPNclient-----NAT1---INTERNET---NAT2----BM39---PRIVETLAN
USer work with Ws - Xp_prof_SP2. On this Xp installe BM39 VPN Client.
Between WS and INETRNET - NAT1 (iptables).
On the other side:
INTERNET--->NAT2---->BM39SERVER---->PRIVETLAN
I ask:
Whic ports and protocols (and in whic directions) need open in the NAT1
for Allow VPN connection between WS and BM39 in this configuration.
Serg

On Sat, 09 Feb 2008 12:55:40 +0000, mysterious wrote:
> serg wrote:
>> Ws(xp_prof)+BM39VPNclient-----NAT1---INTERNET---NAT2----BM39---PRIVETLAN
>>
>> USer work with Ws - Xp_prof_SP2. On this Xp installe BM39 VPN Client.
>>
>> Between WS and INETRNET - NAT1 (iptables).
>>
>> On the other side:
>> INTERNET--->NAT2---->BM39SERVER---->PRIVETLAN
>>
>> I ask:
>> Whic ports and protocols (and in whic directions) need open in the NAT1
>> for Allow VPN connection between WS and BM39 in this configuration.
>>
>> Serg
>>
>>
> tid10088980
Thank you.
Serg

Which ports do I open so QT Broadcast is seen from outside a local network?

I need some help with proper port settings using QT Broadcaster Version 1.5 (113) from mac to mac (running X.4.5 on all systems). I am able to send a Live QT Broadcast to my local network no problem but the broadcast is not seen from outside of my own local Network.
I’m assuming I must first address port settings on my cable modem and / or a Belkin gateway 4 port router.
The Broadcast works fine on all 4 of my macs connected via ethernet to a Belkin 4 port router which in turn is connected to a Toshiba PCX2500 cable modem.
I’m guessing the Toshiba modem is the problem and not the Belkin router. I say this because when I remove the router completely my Broadcast is still not seen by anyone from the outside. This leads me to believe that the cable modem may be the culprit. But then again I’m at a loss to know which ports to open up so others on the internet can also view my broadcast. Please note I do not wish to broadcast to more than one person at a time. Hence no need for QTSS or DSS.
To the best of my knowledge QT Broadcaster in itself should suffice from one mac to another w/o the need for a server. Is this correct? If not, I do have Darwin loaded to another separate mac system in the event I must first use it to reflect this braodcast.
Any help would be sincerely appreciated & please pardon my second post on the same subject / QT Broadcaster which I have slighly reworded in hope of getting some help.
SDMacuser

ok .... i just pinged www.gamesspy.com and i set it at 30 instead of the default 10 and here are my results:
Ping has started ...
PING www.gamespy.com (216.35.19.179): 56 data bytes
64 bytes from 216.35.19.179: icmp_seq=0 ttl=241 time=34.822 ms
64 bytes from 216.35.19.179: icmp_seq=1 ttl=241 time=41.560 ms
64 bytes from 216.35.19.179: icmp_seq=2 ttl=241 time=35.346 ms
64 bytes from 216.35.19.179: icmp_seq=3 ttl=241 time=29.110 ms
64 bytes from 216.35.19.179: icmp_seq=4 ttl=241 time=32.620 ms
64 bytes from 216.35.19.179: icmp_seq=5 ttl=241 time=30.933 ms
64 bytes from 216.35.19.179: icmp_seq=6 ttl=241 time=28.824 ms
64 bytes from 216.35.19.179: icmp_seq=7 ttl=241 time=28.016 ms
64 bytes from 216.35.19.179: icmp_seq=8 ttl=241 time=28.968 ms
64 bytes from 216.35.19.179: icmp_seq=9 ttl=241 time=36.142 ms
64 bytes from 216.35.19.179: icmp_seq=10 ttl=241 time=26.944 ms
64 bytes from 216.35.19.179: icmp_seq=11 ttl=241 time=28.078 ms
64 bytes from 216.35.19.179: icmp_seq=12 ttl=241 time=27.286 ms
64 bytes from 216.35.19.179: icmp_seq=13 ttl=241 time=25.052 ms
64 bytes from 216.35.19.179: icmp_seq=14 ttl=241 time=25.918 ms
64 bytes from 216.35.19.179: icmp_seq=15 ttl=241 time=32.702 ms
64 bytes from 216.35.19.179: icmp_seq=16 ttl=241 time=37.229 ms
64 bytes from 216.35.19.179: icmp_seq=17 ttl=241 time=35.537 ms
64 bytes from 216.35.19.179: icmp_seq=18 ttl=241 time=29.943 ms
64 bytes from 216.35.19.179: icmp_seq=19 ttl=241 time=31.380 ms
64 bytes from 216.35.19.179: icmp_seq=20 ttl=241 time=26.326 ms
64 bytes from 216.35.19.179: icmp_seq=21 ttl=241 time=25.403 ms
64 bytes from 216.35.19.179: icmp_seq=22 ttl=241 time=26.719 ms
64 bytes from 216.35.19.179: icmp_seq=23 ttl=241 time=29.488 ms
64 bytes from 216.35.19.179: icmp_seq=24 ttl=241 time=29.223 ms
64 bytes from 216.35.19.179: icmp_seq=25 ttl=241 time=35.644 ms
64 bytes from 216.35.19.179: icmp_seq=26 ttl=241 time=33.442 ms
64 bytes from 216.35.19.179: icmp_seq=27 ttl=241 time=29.424 ms
64 bytes from 216.35.19.179: icmp_seq=28 ttl=241 time=30.499 ms
64 bytes from 216.35.19.179: icmp_seq=29 ttl=241 time=25.632 ms
--- www.gamespy.com ping statistics ---
30 packets transmitted, 30 packets received, 0% packet loss
round-trip min/avg/max/stddev = 25.052/30.607/41.560/4.043 ms

Which Application Firewall ports are open?

I understand the Application Firewall in OS X (10.5.5) is no longer based on ipfw. Is there a firewall rules list somewhere in the system (similar to the old ipfw list) that reflects the Sharing and Application Firewall options selected, but which shows exactly which ports are open or closed? Is it accessible through Terminal or some other means?

The ipfw firewall is still there, but Leopard's application firewall isn't a port firewall.

Cisco Show and Share Error: NetConnection.Connect.Failed

Hi
I installed Cisco DMM 5.2.0.25 and also CVP. I can able to view videos from the browser of certain PCs . But if i open the same link from another Laptop or PC( which are in same network and domain), I cant able to view the video. It shows an error "NetConnection.Connect.Failed". Am opening through Mozilla Firefox.
Prasanth Abraham

Hi Prasanth,
This looks to be an error of the flash plugin. Could you check if affected PCs have a supported version of Flash or of the Browser, as documented at:
http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_c78-565776_ps6682_Products_Data_Sheet.html
Mozilla Firefox 3.5.3 / 3.6.3
Adobe Flash v.10 recommended
Regards,
Marco

How do I check to see if certain "ports are open?"

I need to open four ports and have no idea how. My web host thought that my ISP was blocking them; the ISP says they are not and that it is teh router. I don't have pjone support anymore (WRT54G is old) so could not be walked through it by a tech support person. If anyone can help me, I would appreciate it. Thanks in advance for your help.

there are port scanners online that check which ports are "open" between your LAN and WAN interfaces. just do a google search.

I want to be able to totally block the FaceTime functionality in my home network. I would like to do this at the router level. Does anyone know the hostname or IP address that the FaceTime application uses? Or which port it connects to?

I want to be able to totally block the FaceTime functionality in my home network so my 4 kids aren't using the Facetime feature- It was easy for Skype just had to enter the work Skype on my Router Security list- and it denies access. I would like to do this at the router level for FaceTime? Only site I find in init.ess.apple.com - is this the startup site for Facetime? Does anyone know a site I can block, hostname or IP address that the FaceTime application uses? Or which port it connects to?

I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open. Good luck!

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Cannot open socket connection on port 443

Hi!
Our server is running on Port 443.
When I try to Connect from the BlackBerry 9300, an exception is thrown "cannot open socket connection on port 443"
Can any one please help me in finding the solution to enable the port 443.
Thank you in advance!
Regards,
Vinay

I assume that you have verified that you can login to the ftp site using a regular ftp client (e.g. Fetch) on the Mac?

Netconnection.connect(), which port to open

Similar Messages

Maybe you are looking for