Netctl with 802.1x password obfuscation
Hi,
I've figured out how to connect to an 802.1x network with netctl, but right now my password is in cleartext in the profile for the network. The netctl wiki page shows how to do password obfuscation for a wpa network, and I was wondering if it is possible to obfuscate the password in a similar way for 802.1x.
This is my current profile:
Description='Automatically generated profile by wifi-menu'
Interface=wlan0
Connection=wireless
Security=wpa-configsection
ESSID=id
IP=dhcp
WPAConfigSection=(
'ssid="id"'
'proto=RSN'
'key_mgmt=WPA-EAP'
'pairwise=CCMP'
'auth_alg=OPEN'
'eap=PEAP'
'identity="User"'
'password="Pass"'
Thanks!
Hi
Depends, if you are using PEAPv0 - this is Microsofts version of PEAP with MSCHAP inside. I would have thought this should support mschap password change.
PEAPv1 is basically clear text inside SSL and I know this doesnt support password change.
EAP-FAST probably doesnt allow password change either.
So PEAPv0 with MSFT supplicant is your best bet.
Darran
Similar Messages
-
Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues
Hi,
We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
it has 768 mb of ram but knock on wood running well. We use Lacie external drives
on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
Questions
1) if indeed it is that the two networks is true and a set yp that is not correct
can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
3) would it be on the same channel as the router or not ?
4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
our phones are land line, one 900 mghz and the others 5.8 ghz
It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
(and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
Thanks Again!!!
Many, Many Thanks
amnienttalesWilliam Boyd Jr.
Hello again,
D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
Leopard (not sure what is after the .6 (right now) D-Link's website is
http://www.dlink.com , I have configured this router multiple times in the past.
also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
and enables online video game play with any one online.
As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
If I can not get a password to work on the A/E I would reset it using the reset button
And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
3) The one question that puzzles me is that we are not using the A/E as a base
but a client
in two sections(Using Airport Express , connecting a Printer via USB
and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
(joiing a new network or existig one)
And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
for use if the A/E was going to be a Base Station and not a client..
Will keep at it,
ambienttales -
Time Capsule (SIM) expand network with 802.11b/g Airport Extreme
Hi, I try to expand a Airport-Network which is set up with a Time Capsule (SIM (latest model). I like to use an Airport-Extreme-Basestation to expand the network. The two devices will be connected wireless. In the helpfile there is a explantation how to do this with 802.11n-devices but when it comes to the 802.11b/g-devices it just says I should have a look on the apple support-pages. I do not find anything there.
I tried everything, but it did not work. I've had a Time Capsule (first model) which died some days ago (the well known powersupply problem). With this Time Capsule I did not had any problems to set up a WDS.
What to do?
Message was edited by: KadegeKadege wrote:
Ok Jolly, thank you, but I started this thread to get in contact to somebody who knows the solution, i.e. has done this before.
Jolly Giant wrote:
try automatic
Of course I've already tried this and the other automatics, but it did not work. That is the reason I am asking for help. So I guess I need special settings.
NOT good !
No protection is not good, ok. But I want it to set up and running and after this I can switch on protection to eleminate some mistake-reasons.
WDS-Mode: "remote WDS-Basestation"
when the UFO joins the TC's network this will no longer apply
But this menu exists and the UFO does not join the network, so I have to select any of this settings!
try these steps provided by Tesserax:
Setting Up Time Capsule as a Second Wireless Router
802.11g AirPort Extreme Base Station -> 802.11n Time Capsule
With "mixed" AirPorts, you will need to configure both routers into a Wireless Distribution System (WDS). Your neighbor's AirPort Extreme Base Station (AEBS) will be the main and your Time Capsule (TC) will be the remote base station in this WDS.
To simplify setup, you should connect your TC directly to the AirPort's LAN port by Ethernet. Once the WDS is configured, you can disconnect the TC and place it at the desired location.
The following are the basic configuration steps to create a WDS:
(Note: To facilitate the WDS set up, jot down the AirPort IDs (MAC addresses) for each of the base stations to be used in the WDS. The AirPort ID and is printed on the label on the bottom/side of the base station.)
Main Base Station Setup - AEBS
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
o Open AirPort Utility (located in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the main base station, and choose Manual Setup from the Base
Station menu, or double-click the base station to open the configuration in a separate window.
o Enter the base station password if necessary. If the base station is using the
default password of public, you will not be prompted for a password.
o Click Wireless in the toolbar, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
o Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
o Select the “Allow wireless clients” checkbox if you want client computer to connect to this base station.
o Click the Add "+" button and enter the AirPort ID of the base station you want to connect to this base station.
o Click Update to send the new settings to the base stations in the WDS.
Remote Base Station Setup - TC
o Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as a remote base station.
o Open AirPort Utility (in the Utilities folder in the Applications folder on a Macintosh computer, or in Start > All Programs > AirPort on a computer using Windows).
o Select the remote base station, and choose Manual Setup from the Base Station menu.
o Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
o Enter the same network password as the main base station, if necessary.
o Click AirPort in the toolbar and click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
o Click WDS and choose “WDS remote” from the pop-up menu.
o Enter the AirPort ID of the main base station in the WDS Main field.
o Click Update to transfer the settings to the base station.
(ref: Pages 42-46 of "Designing AirPort Networks.)
802.11n AirPort Extreme Base Station -> 802.11n Time Capsule
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
does this fix it for you ?
edited by the Jolly Green Giant (where Green stands for environmentally friendly) -
Disk File Sharing Switching from with base station password to with account
Ok, here's the situation. I have an external hard drive, with multiple partitions, connected to an AirPort Extreme (802.11n) and it is currently protected using the "With Base Station Password" option. I would like to switch that to the "With Account" option but when I do the files that are located on the disk no longer appear when a user connects. It will also work fine if I use the "With a disk password" option. So I am not sure why the files are disappearing for the users when they connect. Is there something that I am missing and is it possible to make the change.
I have the same issue.
Plus, in my case, two disks appear on my desktop, even though I have no partition. One is named the same as my disk, the other is named the same as the user account for the disk on the Airport Extreme. -
Wireless Guest Access with 802.1X (PEAP/MSCHAPv2) and ISE?
Hi,
I have a setup based on WLC 5508, Catalyst 3750-X and AP3600i.
The WLCs are running 7.3 and ISE is 1.1.1
I'm trying to setup wireless guest access, where the guests connect to a SSID with 802.1X using PEAP/MSCHAPv2.
They should receive their username/password either from a sponsor directly (corporate AD user which prints the credentials) or through a SMS.
The credentials will be created by the sponsor, using the sponsor portal on the ISE.
Now to the questions:
Is it correct that the foreign WLC (i.e. the WLC within the internal corporate network), should be set to no L2 and L3 security on the guest WLAN, to avoid having the foreign WLC contact the ISE and all traffic be forwarded directly to the anchor WLC?
Is it correct that the anchor WLC (i.e. the WLC in the DMZ), should be configured with 802.1X/WPA2 L2 security and the ISE servers as the RADIUS servers on the guest WLAN, to ensure that the client is correctly authenticated/authorized by the ISE?
When a guest logs on, how can I ensure that only one device (MAC address) is allowed per user?
As it is now, a guest is able to log on with (I assume) an unlimited number of devices, using the credentials they have received.
Thankyou very much :-)
Best Regards,
Niels J. LarsenHi,
I have a setup based on WLC 5508, Catalyst 3750-X and AP3600i.
The WLCs are running 7.3 and ISE is 1.1.1
I'm trying to setup wireless guest access, where the guests connect to a SSID with 802.1X using PEAP/MSCHAPv2.
They should receive their username/password either from a sponsor directly (corporate AD user which prints the credentials) or through a SMS.
The credentials will be created by the sponsor, using the sponsor portal on the ISE.
Now to the questions:
Is it correct that the foreign WLC (i.e. the WLC within the internal corporate network), should be set to no L2 and L3 security on the guest WLAN, to avoid having the foreign WLC contact the ISE and all traffic be forwarded directly to the anchor WLC?
Is it correct that the anchor WLC (i.e. the WLC in the DMZ), should be configured with 802.1X/WPA2 L2 security and the ISE servers as the RADIUS servers on the guest WLAN, to ensure that the client is correctly authenticated/authorized by the ISE?
When a guest logs on, how can I ensure that only one device (MAC address) is allowed per user?
As it is now, a guest is able to log on with (I assume) an unlimited number of devices, using the credentials they have received.
Thankyou very much :-)
Best Regards,
Niels J. Larsen -
WPA with 802.1x authentication
Hi experts,
I need clarification in a fundamental concept.
Is it possible to configure WPA with 802.1x authentication without external AAA / ACS server.
If the username and password is configured in local device, is it possible to create 802.1x authentication without RADIUS server
Thanks in advance
regards,RBYou can't do 802.1x without RADIUS. But you can use Local EAP on an Autonomous AP or on a LAP Controller. They can both act as RADIUS servers. Here's an example config for an autonomous AP:
aaa group server radius rad_eap
server 192.168.0.1 auth-port 1812 acct-port 1813
aaa authentication login eap_methods group rad_eap
dot11 ssid ccie
authentication open eap eap_methods
authentication network-eap eap_methods
guest-mode
radius-server local
nas 192.168.0.1 key cisco
user test password test
radius-server host 192.168.0.1 auth-port 1812 acct-port 1813 key cisco
LAP Controller local EAP is configurable through GUI -
Setting up eth0 with 802.1X security and a certificate
Hello,
I`d like to ask for some help...
I`m living in a building owned by my university and they have rules about the internet connection. Everything was fine using ubuntu, I just entered a window and filled the form in the 802.1X security tab, username, password, certificate. clicked connect -> DONE
Now in a hope to learn more about linux I`m trying to get arch linux working, but the first problem I`ve encountered is that I can`t get the connection running...
So please, could you instruct me what to do?
I need to set up a connection, let`s call it eth0 for simplicity, and I need to have IPv4 enabled, IPv6 disabled, 802.1X security with a username, password some kind of a Add_Trust.... certificate, let`s call it just cert.pem for simplicity. And I have only the command line interface like... you know, 5 seconds after installing the base and rebooting...
Thank you very muchForum search and google are your friend.
https://bbs.archlinux.org/viewtopic.php?id=72799
https://wiki.archlinux.org/index.php/Ne … figuration
https://wiki.archlinux.org/index.php/WPA_supplicant -
Apple AirPort Express Base Station with 802.11n - MB321LL/A. How to set it up to my new iMac
Community:
How do you set up an
Apple AirPort Express Base Station with 802.11n - MB321LL/A how do you set up on Mac running on OS X 10.9.4?
Please advise
FmsalazarApple did say it was important.
If the units do not show up in the airport utility then you must set it correctly to link-local.
Steps for OS X Lion or Mountain Lion
This can happen if IPv6 has been disabled. To enable IPv6 for your network interface:
Choose Apple menu () > System Preferences, and then click Network.
If a lock icon appears in the lower-left corner, click it and enter your admin name and password to unlock the pane.
Click your network service (Wi-Fi or Ethernet) in the list, and then click Advanced.
Click the TCP/IP tab.
Choose Link-local only from the Configure IPv6 pop-up menu.
Click OK.
Click Apply.
AirPort base station not seen or "An unexpected error occurred" appears in AirPort Utility 6.3
Apple rep says the same.
Re: Unexpected error when connecting Airport Express A1264 to Airport Utility 6.3.1
I am searching as I saw it in a thread today where a person had issues. (No contribution from me in the thread but found that was the issue).
It is kind of a fail safe.. since auto can end up with any setting.. and it will depend on the setting of ipv6 in the Airport Router if it works properly in the computer.. setting it to the correct value is one step in sorting out problems when people get in a mess. -
I'm using Numbers version 3.2.2.
Suddenly I cannot access my password protected Numbers file with the correct password. I have the correct password written down so I know I haven't made a mistake.
The response box that pops up says that the file cannot be opened. There are no other options for me to choose from.Also, I tried to open it through an older version of Numbers but it sent this error message.
-
When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified because it is already in use ??? What am I doing wrong?
settings -> iTunes & App Store
click on apple ID listed there
select Sign Out
sign in with the proper account
from then on, when the store ask for your password it should be with the correct ID -
for some reason everytime i got to my membership for pet insurance it says wrong password then i go back to IE 11 and it lets me sign in with the same password...What gives..do I have to have 8 different browsers to get into certain accounts...lol...help
Hi vikadelic,
Do you store your passwords in the browser? If so, you may want to update them to make sure that they are trying to login with the right credentials: [[Password manager - Remember, delete and change saved passwords in Firefox]]
If that is not the case, it may be an old stored cookie: [[Delete cookies to remove the information websites have stored on your computer]] -
I AM A CREATIVE CLOUD MEMBER FOR SOMETIME BUT NOW WHEN I LOGIN WITH THE CORRECT PASSWORD I STILL GET SIGNED OUT MESSAGE AND THEN WHEN TRIED THE SOLUTION GIVEN BY HELP THAT IS TO DELETE OPM.DB FILE OR SECOND SOLUTION INSTALL A FRESH CREATIVE CLOUD FOR DESKTOP APP OR EVEN SOLUTION OF RUN OF IMSLIBREPLACER IM STIILL NOT ABLE TO LOGIN TO MY CREATIVE CLOUD FOR DEKTOP APP . PLEASE HELP ME AS I NEED TO GET IN AND EXPLORE MORE OF MY DOWNLOADED S/W
I HAVE TRIED ALL POSSIBLE SOLUTION BUT AM AMAZED HOW THIS IS HAPPENING TO ME.
PLEASE PLEASE HELP ME .Creative Cloud ConnectionHi Alfred,
I would like to know the exact error message when you sign in, in the meanwhile please try the following steps assuming its Windows, let me know if its a MAC:
1) Go to Start button>> Control panel>> Uninstall a program.
2) Check if you see Browser safeguard there, if yes then uninstall it.
3) Open Internet explorer>> Tools>> Internet options>> Connections>> Lan Settings>> and it should be like this.
-Ankit -
My old nternet account was cancelled and with it my emails. I updated my apple id and password in all my devices (ipad, iphone, imac, except for my moms iphone. I am trying to log out from my old account and set her up with her own apple ID and iCloud etc but it does not let me log out. I have a notebook with all my passwords in it so I know for a fact the password for the old ID/ email is correct yet a window keeps popping up that it is incorrect. I have spent hours reading and trying to fix it myself and nothing is working, same window keeps popping up. Any ideas on what to do? I have an iphone 4S, all software up to date and I made sure my moms phone is also updated. Thank you, any help is greatly appreciated.
Hi ccharat,
Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
Scroll down and tap Delete Account, then tap Delete to confirm.
Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
Enter the password for your previous Apple ID.
Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
Return to Settings > iCloud and sign in with your new Apple ID.
I hope this helps,
-Joe -
If I changed my Apple ID password on my iphone then log into itunes on my phone with that new password, would it automatically sync to my laptop or would i need to put the new password into my laptop also? My laptop got stolen so I changed my password and wanted to be sure it's safe to enter in the new one on my phone. I don't want it to snyc to my laptop.
Hi loro,
Thanks for visiting Apple Support Communities.
I'm sorry to hear that your laptop was stolen. Changing your password was a good step.
Entering your new password on your iPhone will not affect the laptop, as mentioned in this article:
Apple ID: Changing your password
http://support.apple.com/kb/HT5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Best Regards,
Jeremy -
I have a new desktop and re-installed my identity from my airtime back up and on the log in page my picture comes up with my usual password hint, but it is not accepting my password and I do not have the option to reset using my apple id - that particular function is in grey and cannot be clicked on
Depending on what kind of computer you have, you're gonna need to put that backup in the appropriate folder or itunes is not gonna be able to see it for you to use.
Maybe you are looking for
-
Navigation from a report to dashboad page
Hi all, In obiee 11g , if i navigate from a report which has a navigation link to a dashboard page , it populates the prompt but report does not come automatically we need to click it once more where as it works with obiee 10.1.3.4.0 version. Is ther
-
Can't open a file, picture, on Ele-11?
Can't open a photo file on Elelments 11 / Windows 7? I've tried, >open, tried, >file, >open, tried the open pulldown and drag a file. I changed file format from, all formats to jpeg.? I just can't seem to open up a photo file on to my workspace.
-
hi guys, I kinda need your help I just make a website www.garudadidadaku.com but I got a problem with the movie trailer that I attached on the main page. the problem is... if you go to http://www.garudadidadaku.com/eng/main_eng.html you will see the
-
Please help. I need to recover some important files.
-
Determine Business partner number based on the user id
Hi all, Is there a way to determine the BP number of an employee based on the user id. The employee is created as a BP with role Employee in the system. I'm checking USR02 and BUT000.. But i find no link between them. Thank you, Preethi