Netflix : access code for instant watch

Sorry if this has been addressed before but I downloaded the Netflix app, and I am already a Netflix subscriber. To watch instantly, the IPAD asks for an access code and says my device will instruct me how to get that.. the IPAD? Or do I get the code from Netflix? What am I missing here? Thanks!!!

Wait, are you just trying to watch instant Netflix movies on your iPad, or are you trying to use your iPad to wirelessly watch Netflix movies on your TV?
The reason I'm asking is that Netflix ONLY asks for the access code when you set up your DVD/TV the first time for wireless viewing on your TV. To do that you must have the right device for wireless transmission (for example, I have a Panasonic Blu-Ray DVD and the special wireless receiver). You CAN'T use the iPad as the wireless receiver to do this.
If however, you are simply trying to view the movies on your iPad directly, all you need is your Netflix username and password. No access codes are needed.

Similar Messages

Access code for abap

Hi everyone,
Can you please guys post the access code for abap to mscagin at yahoo com
thanks
sri

What do you mean by access code? Is this the same as a developer key?

Satellite L350 - Access code for the router

Dear Sirs
I have a Toshiba Satellite L350 running Windows 7 Ultimate. For the first 5 months it remembered the wireless access code for the router. I then installed a BT Home Hub which I subsequently removed and from then on the Windows 7 machine will no longer remember the password.
I have spent hours on the phone with Microsoft to no avail. Can anyone help?

The problem is very simple but the solution is not.
As I said earlier the computer remebered the wirless access code for around 5 months.
I then installed a BT home hub (free from BT) and it worked fine and then I uninstalled it and reverted back to my D-Link router.
From this point on every time I turn on the computer I have to enter the wireless access code to connect to the internet and until I turn off the computer all works fine.
Microsoft have not been able to locate the problem and neither have BT hence this last attempt to try and find the solution.
Thanks for your reply and I look forward to some help.

Cannot get access code for Showtime anytime on apple tv

I have tried everything and Apple TV is giving me no access code for Showtime anytime. I restored the apple tv.
Can anyone tell me how I can get a code on my apple tv. Thank you

Hi Dean Conrad,
If you are having issues activating or linking a 3rd-party content provider (like Showtime) on your Apple TV, you may find the information listed in the following article helpful:
Apple TV: Troubleshooting third-party content providers - Apple Support
Regards,
- Brenden

IOS7 set access code for IPad4 after update.

Why do I suddenly have an access code for my IPad4 after the ios7 update? I didn´t have an access code before, and I haven´t set one either. My wife says she hasen´t used the ipad since yesterday. I can access the ipad through Itunes on my Macbook, but I can´t reset the ipad because I need to turn off the "icloud search" in the ipad settings (which I can´t access because I don´t know the access code).
Can anyone help?
Thanks,
Rob

Hey robertdbuckley,
Thanks for the question. I understand you are experiencing issues with passcode lock. The following articles may help:
iOS: Understanding passcodes
http://support.apple.com/kb/HT4113
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
Thanks,
Matt M.

Access Code for Long Distance

I am unable to make long distance calls. Each time I try I get a recording stating the access code I entered isn't valid. What does this mean? I've never heard of using an access code for long distance.
Thanks in advance for your help.

Could be mistake.
You could have been slammed by another phone company.
You didn't identify your type of phone service. E.g Fios Digital Voice, Verizon Freedom Plan, etc..
Remember you are talking to peers here. Most likely you will need to use the CONTACT US button on any of the verizon webpage.
http://www.verizon.com/support/residential/contact-us/index.htm

Good afternoon! What to do if forgot an access code for write-off of money from the card?

Hello!!!
What to do if fogot an access code for write-off of maney from the card?

If you made in app purchases in a game, and you did not receive the "items" you paid for, contact the developer of the game. If you are unable to receive support from the developer, you then should contact the iTunes store and inform them that you did not recieve the purchased content.
IF iTunes store support refunds the money that you spent, I would suggest you NOT use the refunded money for the same items, as you may not receive a refund for the same thing again.
Good Luck.

Ricoh Aficio MP C4501 with access codes for color printing

Hi,
I read the discuss called "Ricoh 3245C with access codes for color printing", and I have a similar problem with a Ricoh MPC4501 printer. The printer is connected to many Windows PCs and my brand new iMac. It requires just User Codes authenication. PostScript is not installed on the printer (could this be the problem?). I've tried all the suggestions brought up in the mentioned discussion but I still can't print. It seems like the printer is not connected to the Mac. Here are the answers to the questions asked in the previous discussion:
Is PostScript module installed?
No, I guess. PS is not one of the languages included on the Configuration Page.
What languages does your printer understand?
RPCS [3.10.14], PCL 5c [1.02] and PCL XL [1.02]
What drivers are you using?
I tried the one from the Ricoh site for OS10.8 (http://support.ricoh.com/bb/html/dr_ut_e/ra/model/mpc41/mpc41en.htm) as well as the driver (three downloads) from Linux (http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/pxlmon o). Neither worked. It might be helpful to mention that the Linux driver enabled me to print to a Ricoh Aficio MP 4001 that doesn't require authentication.
How are you entering your User Code?
Depending on the application. For Adobe apps, which are my main concern, I would have to click on the Printer button in the Print dialog to open the system Printer dialog, then enter the user code there under Job Log. I had to use the script provided in the previous discussion (http://webpages.charter.net/mbroughtn/beta/RicohUserCodes.zip) to add my User Code.
How are you connecting to the printer -- what protocol?
I'm not sure. I didn't find any of the protocols cited in the previous discussion on the Configuaration Page. If it helps, I know that the printer has an IP address on the network. And as I mentioned, it's mainly connected to many Windows PCs.
Any help is appreciated. Thanks.

Can't help with user codes, but I suggest you try IP HP jetdirect first whenever you add an enterprise net printer. You could always look on a windows computer for printer port configjration. There, you will find jetdirect called raw port 9100 protocol.

I have asked for the access code for the Photoshop that I have purchased.

I have applied for an access code for the Photoshop that I have purchased. I sent a payslip as well as registration as a teacher. Can I get the access code from you? I purchaed the product early last month and have not recieved any information.
Thanking you for your time and help

do you have a serial number? have you installed photoshop? are you trying to activate and are you looking for an activation code?

How can i get access code for SAP 4.7 IDES version ?

How can i get the access code for SAP 4.7 IDES version ?
Thanks

Hello Rahul,
If you have registered / licensed IDES Version.
You can generate Access code for Developer / Objects from http://service.sap.com/sscr
Regards ,
Santosh Karadkar

I've lost my access code for my device and the type of device is the iPad Mini

I lost my access code from may device and the type of device is the ipad mini

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Locked Access Code for Network Preferences - treo650

I've been using a used treo650 for about a year. I finally decided to try the web usuage and had sprint activate it. But it appears that the previous owner of my phone put a access code on the network preferences area I need to finish setting the phone up. After working with Sprint tech support it looked like the only solution was to do a hard reset on the phone and have the sprint store configure the phone and web info - then I would hotsync to recover my data - good plan - first part worked - sprint was able to configure the phone and it worked! - But when I hotsync'd it to recover personal data the network preferences were overridden and I'm back to a lock network preference and no web access.
Looking for a way of defeating the access code and still being able to hotsync ------- I have a few ideas put they are pretty drastic.
Any Ideas?
Post relates to: Treo 650 (Sprint)

When you sync, you get a lot of little settings files along with the big databases containing your contacts and calendar. I don't know which files are responsible for network settings, but if you have time, you could rummage around in your profile folder. Not sure where yours is, but mine was under c:\Program Files\palmOne\username when I originally installed, and when I installed the downloadable version of Palm Desktop, it was created under c:\Program Files\Palm\username.
== Edit ==
A backup would be advisable.
Message Edited by Jeffro on 12-03-2009 12:04 AM

Access code for CO line

Bonjour,
Je suis entrain de tester un systéme UC520 avec 3 postes ip cisco. j'ai connecté le port FXO numéro 3 avec une ligne PSTN qui est déja raccordé à un autre standard simenes. le probléme c'est que lorsque je veux faire des appels à l'exterieur je dois configurer un bouton d'assignement pour chaque poste
car il n'ya pas de prise de ligne automatique et je ne connais pas le prefixe que je dois mettre, ce que je le connais pour les autres standards qu'il ya des access code pour chaque ligne par défaut.
Merci

With CCA I am not sure if you can mix CO Line and steering-digit configurations. However, it is not recommended to use the system as a "key system" anyway; it limits your design and while it is "familiar" for many small businesses it is not a great way to handle calls.
For what its worth this can definitely be done in CLI though.
-Dan
Please rate useful posts.

Access code for SAP HANA dev center

Hi ,
Could you please let me know on how to get the Access code , which is a mandatory field to request for SAP HANA Dev .
Regards,
Nagaraj

Hi Nagraj,
From the [SAP HANA Developer Access page|http://www.sdn.sap.com/irj/sdn/sap-technology-innovation?rid=/webcontent/uuid/c022341c-5ed1-2e10-0b98-9b6a3314dd25],
During the Beta version of this page HANA sandbox system access is by invitation and limited to test and trial and its all the sandboxes systems are currently fully booked

Ricoh 3245C with access codes for color printing

Hello,
We have a Ricoh 3245C and some MacBook Pro users with OS X Snow Leopard. The printer is configured so that a user needs an access code to print in color, but anyone can color in black and white.
When Mac users try to print, the print queue says the job is paused, and the job never prints. It doesn't matter if the document is color or B and W.
Help.
Thanks,
Josh

Matt Broughton wrote:
I find this hard to believe.
Hi Matt, et al. Thanks for the replies.
Just to re-iterate what I wrote above, we are using a Ricoh Pro 906 EX printer, and have attempted authenticated printing on the Mac with PPD's obtained from both the Ricoh website as well as the open source versions you reference. (Not sure what the "job log" reply above was about.) In that effort, we wrote to Richo at solutions(at)ricoh-usa.com to ask about authenticated printing features on the Mac. I will spare the group the entire discussion thread, but here are the relevant exchanges.
'--- My original inquiry - Sept 22, 2010 ---
Hello,
Our office has a Ricoh Pro 906 EX printer and we are having a lot of trouble getting our Apple Mac users setup to print. After downloading your latest Mac/OSX driver software, we still do not see a place to enter User Codes and Passwords for individual users like the Windows driver software has. As a result, no print jobs are sent to the printer.
Basically, what we are trying to do is Authenticated Printing. I note that there are several different places where Ricoh printers ask for "User Code" or "User ID" or etc. One thing I see on our Windows machines is a place to enter Authentication credentials -- THIS IS WHAT WE NEED -- but we can't find the matching dialog box on the Mac. I included a screenshot from a Windows machine we have setup and working. I think we just need to know if the Mac supports Authenticated Printing.
Can you assist?
'--- Final Reply - Sept 23, 2010 ---
Mr. <snip>
To give you some background information, Ricoh devices can be set up with multiple forms of authentication (that is built-in to the machine) such as:
a. User Codes -- You can have up to 500 distinct user codes defined. Instead of someone inputting their User Name & Password they enter in a 4-8 digit number.
b. Basic Authentication -- You can define user names & passwords on the copier. In order to print (or copy if it's set up that way) you would have to put in both the user name and password defined on the copier.
c. Windows (Active Directory) Authentication -- You can input your Windows user name & password. Obviously you have to be a user on the domain in question.
d. LDAP Authentication -- You can input a user name & password and then the copier tries to verify that you are a user against your LDAP server. You must specify the LDAP server to use.
Based on what you explained and your screenshots I would assume that the Ricoh copier is set up with "Basic Authentication".
Without going to a lot of trouble & hassle (I.E. to convince someone to do a driver customization) the MACs do not directly support Basic Authentication. The only type of authentication + tracking solution that works with the MAC PPDs (and is built-in) are User Codes. So instead of everyone having a user name && password they would be assigned a number (4 to 8 digits) that they would input when they need to print or copy. We could look into a customized driver option, but if you are only serving 20 users it would not be cost effective. Have you considered just "upgrading" people to Windows? There may be some other solutions that Ricoh offers that may work well for you. You may want to contact the sales person for the account and they can work with you to see what options would work best.
Thank you,
<snip name>
TSSC
Ricoh Americas Corporation

Netflix : access code for instant watch

Similar Messages

Maybe you are looking for