Netflix Error - Unable to sign in. Sorry we could not reach the Netflix server.

I have been a big fan of the Apple TV 2 and have been using it since the day it came out. While I have had periodic challenges with Netflix, once I moved into our new house and completely reworked my home network, it was working flawlessly until right before the last update in December. I had been having zero problems with it when I started getting the above message. I read an update was on the way so I waited but even after the latest update I am still having the same problems and I don't get it.
I can sit in my living room and turn on my Macbook and watch Netflix just fine. I can turn on my Android phone while on the wireless in the house and watch Netflix just fine. I can turn on my samsung DVD player and watch Netflix just fine. I can even turn on my xBox and watch Netflix just fine. Everything in the Apple TV works and I can link with my iTunes no problem. I don't get this problem.
There have been other threads on this topic in these forums with no resolution and when I contact Apple, they say it's a Netflix issue and when I contact Netflix, they say it is an Apple issue.
Has anyone found a resolution to this?

In case you did not already see this.
http://www.tipb.com/2010/12/13/apple-tv-bugs-reach-netflix-service/
I am having the same problem.

Similar Messages

"Sorry we could not reach the Netflix Service. Please try again... (112)"

Twice this week I have watched a several episodes of a TV show on Netflix through my Apple TV and then try to go to the next episode but get the a message that says:
SORRY WE ARE UNABLE TO CONNCT TO THE NETFLIX SERVICE. PLEASE TRY AGAIN LATER. IF THE PROBLEM PERSISTS PLEASE VISIT THE NETFLIX WEBSITE (112).
I am able to navigate through the Netflix menu, but unable to watch anything.
I visited the Netflix website and they don't offer an explanation beyond restarting Apple TV or calling Apple.
I AM able to use other features on Apple TV (such as YouTube)-- just can't watch Netflix.

In case you did not already see this.
http://www.tipb.com/2010/12/13/apple-tv-bugs-reach-netflix-service/
I am having the same problem.

Sorry we could not reach the Netflix service. Please try again later.If the problem persists please visit the Netflix website.

I know my internet connection is working and Netflix still wont load or just cut me off completly at half way thur watching an episode.

Same here... I have 2 AppleTV's: 1 in my LR, and another in my bedroom. Netflix works fine on my MacBook Pro, my iPhone, and on the AppleTV in my LR... but refuses to play on my bedroom unit. I've tried the unplug/wait thing.. resetting... ensuring that my LR unit wasn't still playing content...etc. No joy.
Contacted Netflix... they say it's not on their end, since I can get service on all of my other devices.
Has anyone returned their unit to the Genius Bar guys yet?

Error executing search on Plumtree Corporate Portal : Could not contact the Search Server.

Hi
I have intsalled the plumtree portal.... The links are working. But when i search any word then it gives following error messages
"Error executing search on Plumtree Corporate Portal : Could not contact the Search Server."
Please let me know what could be the solution to above problem
Thanks

Santosh,It appears that your portal server can not connect to the Search Server.1) Check to ensure that the "Plumtree Portal Search Server" NT Service is running. It will be an NT service. If you check the PlumtreePortal_v5-0.properties file you should see two entries for where you installed the Search service.SEARCH_SERVER_HOST=servernameSEARCH_SERVER_PORT=15244
2) If the service is not started, then start it...
3) You can test connectivity to the Search Server by telnetting to server in question at port 15244 (or whatever port you installed the search service on). If you get a response from Ignite, then the search server is up..
Phil Orion | [email protected] | www.orionsmith.com

Script Alert: "Sorry I could not process the following files" (Error Message using Image Processor)

I'm a seasoned Photoshop/Bridge CS5 user who recently upgraded to CS6. In Bridge I just ran my first Image Processor batch, trying to convert a set of RAW .NEF files to .PSD files with a basic editing action I created applied to them. Photoshop CS6 opens the files from Bridge and applies the actions, but then I get the "Script alert" error message "Sorry I could not process the following files" and a list of all of the files in the batch I was trying to run the script on. The files all remain open and are saved on my hard drive in a folder created by the Image Processor script, but do not close unless I manually close them. I never had this problem in CS5 where the image processor would apply the desired actions to the batch of photos one at a time, then save and close. Thoughts on how I can fix this bug?

Hey Jeff--
No specific action steps to make the image safe - no flattening, etc. Had problems narrowing down the specific action step causing the problem. So I ran the Image Processor script in the ExtendScript ToolKit and debugged in. (I'm using the version that shipped with CS4.)
Turns out what was happening is that the app.activeDocument.close() command on line 1490 was never getting called, because the this.SaveFile() above it was throwing an exception. More debugging got me to the problem - SaveFile() tries to restore the history state after making a doc safe for saving as a JPEG. This causes an exception. So I commented out line 1571:
// app.activeDocument.ativeHistoryState = historyState;
The script runs just fine after this. I commented out the close to see what history states got added to the doc, but no new states are recorded, so commenting out the restore line should not cause any problems.
Of course, my solution does not solve the problem and I may need to comment out all the saveFile() lines that does this. Not sure why some actions have this problem and others don't. The actions I am running have about 25 steps. Perhaps PS is not catching up quick enough. I added a $.sleep(2500) after the restore history but that didn't help.
So, not sure where this gets us. I will check about posting an action set with just one of the actions that cause the problem. But I may also have our customer comment out that line of the Image Processor script.
Hope this helps. May post more next week.

Sorry, we could not complete the operation. Please try again later or reload the web page

I am a bizspark member and wanted to signup for Azure.
I did phone verification part and when I sign up I get this error
Sorry, we could not complete the operation. Please try again later or reload the web page
Same happened with my colleagues ones too. But 2 invites got accepted after reloading the webpage for 100+ times. I am loosing my patience here. I have seen others getting this error as well. Do you guys have any idea how irritating this is? Azure support
is also not responding properly. Its a big headache for developers like us.
When will you solve this issue? And I want an correct explanation why this error occurs. Don't tell me to clear cookies and cache. I've done everything. Tried different browsers.

Hi,
It seems there is something wrong with your sign up process, sorry for the inconvenience, this is technical forum, the account issue is out of our range, please follow steps below to contact with azure support, it's a best choice for you.
Get the support channel at:
http://www.windowsazure.com/en-us/support/options/
If you have any other concern, please feel free to let me know.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to resolve ORA-12154: TNS:could not resolve the connect identifier specified

Hi Friends,
I am unable to resolve ORA-12154: TNS:could not resolve the connect identifier specified, error:
C:\Windows\system32>sqlplus scott/tiger@ORADATA
SQL*Plus: Release 11.2.0.1.0 Production on Sun Feb 2 13:46:10 2014
Copyright (c) 1982, 2010, Oracle. All rights reserved.
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
SQL> select database_name from v$database;
DATABASE_NAME
ORADATA
SQL> select instance_name from v$instance;
INSTANCE_NAME
oradata
tnsnames.ora
============
ORADATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL=TCP)(HOST=himanshu-PC)(PORT=1521))
    (CONNECT_DATA =
(SERVICE_NAME = oradata)
(SERVER = DEDICATED)
listener.ora
=========
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = himanshu-PC)(PORT = 1521))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME = ORADATA)
      (ORACLE_HOME = G:\app\himanshu\product\11.2.0\dbhome_1)
      (SID_NAME = oradata)
sqlnet.ora
========
SQLNET.AUTHENTICATION_SERVICES = (NTS)
C:\Windows\system32>lsnrctl status
LSNRCTL for 32-bit Windows: Version 11.2.0.1.0 - Production on 02-FEB-2014 13:53:37
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=himanshu-PC)(PORT=1521)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.1.0 - Production
Start Date                02-FEB-2014 13:29:35
Uptime                    0 days 0 hr. 24 min. 6 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   G:\app\himanshu\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File         g:\app\himanshu\diag\tnslsnr\himanshu-PC\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=himanshu-PC)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
Services Summary...
Service "ORADATA" has 2 instance(s).
Instance "ORADATA", status UNKNOWN, has 1 handler(s) for this service...
Instance "oradata", status READY, has 1 handler(s) for this service...
Service "ORADATAXDB" has 1 instance(s).
Instance "oradata", status READY, has 1 handler(s) for this service...
The command completed successfully
Kindly guide whats wrong with my configuration.

ORADATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL=TCP)(HOST=himanshu-PC)(PORT=1521))
    (CONNECT_DATA =
(SERVICE_NAME = oradata)
(SERVER = DEDICATED)
Try editing the tnsnames.ora file to check there is any junk characters around the tns entry(shown in RED) and then try pining the tns from CMD as
tnsping ORADATA.

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps

I have two faults! 1, an error comes up in Ps CC 2014 "could not apply the saved panel configuration, restring to default and my tools have disappeared completely and anything ive tried I cannot get them back not even the drop down menu in 'window' helps at all. And 2, Lr everytime I load it up it gives me the option to retry or switch to and it takes a while for me to even get anywhere with it I think it has something to do with the catalogs? I've been using these programs for a few years now on a Mac...no problem but when I use a PC when I'm away coz it's the (only) comp available these happen PC's are so useless! Please can anyone help??...

I can give a few suggestions on Photoshop CC 2014, but Lightroom is a separate forum and you should ask Lr questions there.
First close Photoshop.
Then start Photoshop by double-clicking on it's icon and very quickly after that, hold down the ctrl-alt-shift keys until you see the reset dialog. answer "Yes" to delete settings, and let Photoshop continue to load.
It's tricky to do and may take a few tries, but at least it should reset Photoshop CC 2014 to defaults.
Gene

Error message pops up saying "Network Connection could not find a PPPoe Server.

I am trying to update my wife's iBook, 2,1 for my mom to use. It is running OS 10.6.8. Every time I wake up the computer an error message pops up saying "Network Connection could not find a PPPoe Server." It does it periodically when the computer is on. It will drive my mom nuts and worry her. Can anyone help me stop this from happening?
Thanks,
KC

Hello kevinfromwauwatosa,
Thanks for the question. The following article provides the most relevant information to your issue:
Troubleshooting "A connection failure has occurred", "The specified server could not be found" or similar messages
http://support.apple.com/kb/TS1843
For additional information see this resource:
Mac OS X: Troubleshooting a PPPoE Internet Connection
http://support.apple.com/kb/TS1871
Thanks,
Matt M.

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Getting this error message, what do I do? 'Could not initialize the application's security component.'

Rest of the error message: The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full.
I just downloaded the latest version, and tried to open the browser. Where do I find the profile directory and how do I know what a read/write restriction looks like?

Did you try to rename the file cert8.db (cert8.db.sav) in the profile folder and maybe secmode.db as well?
*Help > Troubleshooting Information > Profile Directory: Open Containing Folder
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Script alert: "Sorry I could not process the following files:"

I keep getting this error when I try to run the "Image Processor" Script. I have tried searching everywhere to no avail. I am running on Windows 7 and CS6. What I have tried:
Increasing History States, Memory Usage, and Scratch Disks
Turning "Save in Background" on and off
Turning "Open Documents as Tabs" on and off
Deleting the Preset Scripts
Deleting the preferences file
Reinstalling Photoshop
Checked for updates
Tried to come in through Bridge, instead of Photoshop
Convert one photo instead of many.(all above was tested with one)
Working variations: Using the image processor for PSD instead of JPG yields appropriate results.
Related Pictures:
Thanks for your help.
~AS

AStrickland wrote:
A wild guess. I see from you screen capture your processing open documents and that your saving to the same location. My wild guess is that you duped a document and never saved that document so the document has no backing file therefore no location or there is a new document open the has not been saved. Photoshop Image Process script does not know how to save into no location? Do you?

Why do I get, 'Sorry, I could not process the following files:' ?

Working in Photoshop CS6 Extended - Think I've done everything right, including setting the action (see images)! I go to Scripts > Image Processor > Select Folder > Save in same location > Select file type + quality > Run action. New JPG folder IS created in same location, but is empty, and all files remain open in Photoshop. I CAN save manually from here, but that defeats the purpose! Please help - thanks very much!!

Thank you so much!!! I just did a test run with an old file and changed all of the file names that had symbols and it worked!! It packaged for me without errors. So great!!!!

HT1349 Mi itunes does not downloads latest swoftware when I click check for update it appears a sign that says "iTunes could not contact the iPod software update server because you are not connected to the internet" this happens even though I am connected

My iTunes does not downloads the latest software when I click check for updates or download latest version, a message appears "iTunes could not contact the iPod sortware update server because you are not connectet to the internet" even though I am connected, can some body help me?

If necessary, also see:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Could not create the Java virtual machine error during installation

Hi,
We are doing an ERP 2005 Installation on AIX 5.2 ML08 with DB2 as the
database.During "Import ABAP" Phase of the installation we are getting
the below error.
========================================================================ERROR 2007-03-12 13:35:30
CJS-30022 Program 'Migration Monitor' exits with error code 1. For
details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-12 13:35:30
FCO-00011 The step runMigrationMonitor with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was
executed with status ERROR .
========================================================================
In "import_monitor.java.log" below entries are there
Unrecognized option: -Xj9
JVMCI119: Error parsing IBM_JAVA_OPTIONS java options - rc=-6
Could not create the Java virtual machine.
Usage: java [-options] class [args...]
(to execute a class)
or java [-jar] [-options] jarfile [args...]
(to execute a jar file)
Java Version is as below
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX build ca142-20050929a (SR3)
(JIT enabled: jitc))
Regards,
Sumi

Hi all,
I just checked the note 716927 again - it refers to note 1024539.
That one says you should use SR7 and activate J9 technology
so make sure you have the java version
"J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build
caix64142ifx-20061222 (ifix 113727: SR7 + 112603)"
and that the environment variable
IBM_JAVA_OPTIONS=-Xj9
is set for user <sid>adm
After the installation, make sure that the JVM parameters are set as described in the note 1024539.
By the way: it doesn't work if you use any other Java SDK (e.g. from Sun), as AIX has it's own one.
Best regards,
Cornelia

Netflix Error - Unable to sign in. Sorry we could not reach the Netflix server.

Similar Messages

Maybe you are looking for